I observed the problem on a system with fairly old and, apparently,
buggy EFI implementation. A list of boot devices had an invalid
trailing entry. efidp_size() for that entry returned zero, which means
that the code got stuck looping on that entry.
The rest of the sound system supports 7+1 maximum and is not aware of 8+0.
I believe that these messages are caused by 8+0:
kernel: feeder_init(0xfffff801f935d680) on feeder_matrix returned 22
kernel: pcm0: feeder_build_matrix(): can't add feeder_matrix
This should disable allocation of the second per-CPU principal buffer
which is never used. This will also enable additional asserts
for buffers that are never switched.
For example, shutdown_panic wants to produce some output and maybe take
some input before a system is actually reset.
The change should only make difference for the case of system reset
(reboot), poweroff and halt should not be affected.
The change makes difference only if hw.acpi.handle_reboot is set. It
used to default to zero until r213755 / ac731af567.
First of all and unlike I2C, it's not the master that dictates how many
bytes to read in block read operation. It's the device that informs the
master how many bytes it's sending back.
Thus, for ichsmb_bread() the count parameter is purely an output
parameter. The code has been changed to reflect that.
The sanity checking of the response length is now done once it (the
first byte of the response) is received.
While here, handling of ICH_HST_STA_FAILED status bit has been added.
Plus some code style improvements and some new code comments in the
vicinity of the changed code.
That is, wd_shutdown_countdown value is ignored when halting.
A halted system should remain halted for as long as needed until
a power cycle, so the watchdog should not reset the system.
Power off or reset may be activated either by low or high signal or by an
edge. So, try everything.
Also, the driver now supports DTS properties for timings.
Finally, the driver does not change the pin configuration during attach.
It is assumed that the pin is already in a state that does not trigger
the power event (otherwise we wouldn't be running).
Fall-through to non-FDT probe code if no matching device node is found.
While here, fix indentation of the switch statement.
Also, make the device description for the hints-based attachment the
same as for FDT attachment.
Fixes: 2486b446db ds1307: add support for the EPSON RX-8035SA I2C RTC
The code in this file runs before the sanitizer can initialize its
shadow map.
Fixes: ad2fac552c ("lib/libc/amd64: add archlevel-based simd dispatch framework")
On several systems we've noticed that when NTB link goes down, the
Physical Layer User Test Pattern registers we use as additional
scratchpad registers (that is explicitly allowed by the chip specs)
become read-only for about 100us. I see no explanation for this in
the chip specs, neither why it was not seen before, may be a race.
Since we do need these registers, workaround it by repeating writes
until we succeed or 1ms timeout expire.
MFC after: 1 week
This is another part of fixing the WITH_ASAN build. Some additional
source files had to be added to libllvm and liblldb, since the ASan
instrumentation causes symbols in those files to be referenced.
Reported by: markj
PR: 276597
MFC after: 3 days
[compiler-rt] remove hexdump interception. (#79378)
a freebsd dev member reported a symbol conflict and intercepting this
had little value anyway.
This is one part of fixing the WITH_ASAN build. Some executables in the
base system define their own hexdump() symbol, which would otherwise
conflict with the ASan-intercepted one.
Reported by: markj
PR: 276597
MFC after: 3 days
We have s_fabs.c, but fabs(3) is already provided by libc due to
historical reasons, so it is not compiled into libm. When the linker
does not use --undefined-version, this leads to a complaint about the
symbol being nonexistent, so remove it from Symbol.map.
While here, adjust the comment about some functions being supplied by
libc: while it is true that all these are indeed in libc, libm still
includes its own versions of frexp(3), isnan(3), isnanf(3), and
isnanl(3).
Reported by: Steve Kargl <sgk@troutmask.apl.washington.edu>
MFC after: 3 days
Otherwise we get spurious test failures when running tests in parallel.
The intent here was to name jails after the tests, but this was done
incorrectly in a couple of places.
MFC after: 1 week
The section INTERNET ADDRESSES describes the acceptance of dotted
values with varying number of parts in multiple bases. This applies
to inet_aton and inet_addr, but not to inet_pton. Clarify this
section by listing the functions to which this applies. Move the
description of what inet_pton accepts into this section from STANDARDS,
where it is easily missed. Rename the section to clarify that it
applies only to IPv4. (inet_pton also works with IPv6.)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43537
The amd64 and arm64 images supported UEFI, mark it as so users can take
advantage of UEFI boot on GCE. This is already done on FreeBSD
14.0-RELEASE but never codified into the release tools (and should).
PR: conf/276532
Reviewed by: lwhsu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D43557
newfs always sets sectorsize to DEV_BSIZE (512) and derives some other
values based on the number of 512-byte sectors per real sector. Similar
logic is required in makefs. Until that happens, emit a warning that
the image may be incorrect.
PR: 276571
A commit from 2012 (5d7380f8e3, r228424) introduced
'td_stopsched', on the ground that a global variable would cause all
CPUs to have a copy of it in their cache, and consequently of all other
variables sharing the same cache line.
This is really a problem only if that cache line sees relatively
frequent modifications. This was unlikely to be the case back then
because nearby variables are almost never modified as well. In any
case, today we have a new tool at our disposal to ensure that this
variable goes into a read-mostly section containing frequently-accessed
variables ('__read_frequently'). Most of the cache lines covering this
section are likely to always be in every CPU cache. This makes the
second reason stated in the commit message (ensuring the field is in the
same cache line as some lock-related fields, since these are accessed in
close proximity) moot, as well as the second order effect of requiring
an additional line to be present in the cache (the one containing the
new 'scheduler_stopped' boolean, see below).
From a pure logical point of view, whether the scheduler is stopped is
a global state and is certainly not a per-thread quality.
Consequently, remove 'td_stopsched', which immediately frees a byte in
'struct thread'. Currently, the latter's size (and layout) stays
unchanged, but some of the later re-orderings will probably benefit from
this removal. Available bytes at the original position for
'td_stopsched' have been made explicit with the addition of the
'_td_pad0' member.
Store the global state in the new 'scheduler_stopped' boolean, which is
annotated with '__read_frequently'.
Replace uses of SCHEDULER_STOPPED_TD() with SCHEDULER_STOPPER() and
remove the former as it is now unnecessary.
Reviewed by: markj, kib
Approved by: markj (mentor)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43572
It's not an assertion, so doesn't logically belong to 'kassert.h'.
Moreover, a subsequent commit will make it rely on a variable whose
declaration also belongs to 'systm.h'.
Approved by: markj (mentor)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43571
While here, put such annotation after the variable for 'dumping', since
it concerns the variable and not the type.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43570
Currently, no performance-critical path tests for a panic. Moreover, we
today have KERNEL_PANICKED() which wraps the test into
__predict_false(), already catering to those (potential) use cases.
Also, in practice we don't support 64-bit architectures without caches,
so reading an 'int' instead of a pointer doesn't (directly) save any
memory access. Finally, 'panicked' is redundant with 'panicstr' (and
wastes a tiny amount of memory).
Consequently:
1. Use again 'panicstr' as a flag indicating that the system is
panicking. To this end:
- Modify panic() so that it ensures this pointer is set to some
non-NULL value even if the caller didn't pass any panic string.
- Modify KERNEL_PANICKED() to test for 'panicstr'.
- Remove 'panicked'.
2. Annotate 'panicstr' with '__read_mostly' (instead of using
'__read_frequently' as for 'panicked'). This may have to be changed if,
in the future, some performance-intensive path needs to test it.
3. Convert a few more direct tests of 'panicstr' to using
KERNEL_PANICKED().
Reviewed by: kib, markj, emaste
Approved by: markj (mentor)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43569
pmap_san_bootstrap() doesn't really do much, and it was hard-coding the
the bootstrap stack size defined in locore.S. Moreover, the name is a
bit confusing given the existence of pmap_bootstrap_san(). Just remove
it and call kasan_init_early() directly like we do on amd64. It will
not be used by KMSAN in a forthcoming patch series.
No functional change intended.
MFC after: 1 week
Sponsored by: Klara, Inc.
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D43403
In the errno list, add an explicit note and reference to the note in the
STANDARDS section.
When O_NOFOLLOW is specified and the target is a symbolic link FreeBSD
sets errno to a value different than that specified by POSIX. Commit
295159dfa3 added a note to this effect, but I missed it when reading
through the list of errno values.
PR: 214633
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43618
Use SEQ_SUB instead of a plain subtraction, for an implict
type conversion and prevention of a possible overflow.
Use curly brackets in stacked if statements throughout.
Use of the ? operator to enhance readability when clearing
the FIN flag in tcp_output().
None of the above change the function.
Reviewed By: tuexen, cc, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D43539
Currently there are a few output sections left as implicitly using
:kernel :dynamic before :kernel on its own is used again, which means
they end up in both the PT_LOAD and the PT_DYNAMIC segments, an unusual
situation which the new libelf-based kldxref initially treated as
invalid. Thus, hoist the :kernel to the very next section to ensure only
.dynamic is in PT_DYNAMIC, as is more normal.
Whilst here, sync ldscript.powerpc64le with ldscript.powerpc64 to pick
up various fixes that were presumably made between the start of the
powerpc64le port and it being committed and got missed.
Reviewed by: jhibbits, jhb
Differential Revision: https://reviews.freebsd.org/D43066
Shifting bits is quicker than checking header flag bits
one by one. Also improve readability by the use of switch
statements.
No change in behaviour.
Reviewed By: glebius, tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D43560
Account for SACK retransmitted bytes once the actual length
is known. This prevents a call to tcp_maxseg() and prepares
for TSO support when transmitting from the SACK scoreboard.
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D43447
When booting a KMSAN kernel on an Ampere Altra, I've seen some boot time
hangs when the XHCI controller driver attempts to allocate memory for
32-bit DMA. The system boots fine with a GENERIC kernel; I believe that
the additional memory requirements of KMSAN push it over the edge. The
system has a bit less than 2GB of RAM below the 4GB boundary.
Allocate a new freelist to segregate memory below 4GB, as we do on
amd64, so that such memory allocation failures are less likely to occur.
Reviewed by: alc
MFC after: 1 month
Sponsored by: Klara, Inc.
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D43503
Interesting fixes:
03c83f5 add __cxa_init_primary_exception (#23)
5d8a158 Fix two bugs in __cxa_end_cleanup()
b00c6c5 Insert padding in __cxa_dependent_exception
45ca8b1 Insert padding in __cxa_exception struct for compatibility
f2e5509 Fix unlock in two-word version and add missing comment.
6229590 Add an option for disabling emergency buffers. (#14)
Introduce a verbose output mode to pflowctl, and expose the status of
the socket to userspace. This can be helpful in debugging configuration
errors.
Sponsored by: Rubicon Communications, LLC ("Netgate")
