+ Remove 'sleep' (not sure why it is so important in fix-it mode).
+ Remove ability to mount MSDOSFS as that is not a typical filesystem on an
alpha; and thus does not really add to the fix-it mix.
+ Sync style with i386.
ordering on release notes items, in an attempt to bring some order
to a huge mess. This commit covers the top-level "Userland"
section.
No other content, markup, or whitespace changes.
files to use 5.x syntax (I hope..)
Note: I suppose one might need to hack the hints file as well?
Submitted by: Mike Barcroft <mike@FreeBSD.ORG>, Bruce Mah <bmah@FreeBSD.ORG>
bit, and fix up the upgrading section. While I'm here, delete some
of the SGML comments that were left-over from merging the source
files.
MFC after: 1 day
notes document. Basically, I've moved the contents of common/
{artheader,intro,upgrading}.sgml into common/new.sgml, removed duplicate
$FreeBSD$ markers, and adjusted the various references to these files.
No other whitespace or content changes.
This change will make it easier to do some minor restructuring.
MFC after: 1 day
in crunch.conf -- the previous choice, CWD, was too subject to false
matches (this string will be replaced by the absolute pathname
during the build process).
From the user's perspective:
* everything is now built outside the source tree (more precisely,
in `pwd`/builddir-${name}/ ) except for the kernel config file(s)
which still need to be copied into src/sys/i386/conf because of
"config" limitations. I am not sure if there is an easy way
to get away from this without changing "config" or replicating
some part of the source tree.
This is really the only change that most users should worry about,
but it is a good one.
* if you do cross-compiles (using "picobsd --src somedir/src [--init] ... ")
then the libraries and include directories etc. are searched/created
in "somedir/usr" ;
* you can do most things (basically build the kernel and the crunched
binary and the filesystem trees) without root privileges. You need
privileges to use mdconfig/vnconfig to create the actual MFS and
floppy image, unfortunately.
* the -v option now prints some diagnostic but does not stop for
user input at each step. You need to specify -v -v to have the
old behaviour.
Internally, the script has been reshuffled quite a bit to support
the above features. Many shell variables have been renamed or
made local in an effort to avoid undesired side effects. There is
a somewhat better error handling in case something goes wrong.
tree. Unfortunately the latter cannot be completely readonly, because
"config" still depends on the kernel config file being in sys/${ARCH}/conf
(it seems to derive other pathnames from that one).
section. Move release notes for tunneling-type drivers from network
protocol section to NICs section for consistency (tap(4) release notes
were combined).
before parsing the command line.
Move code to build include and libraries in a separate function,
so we can use the verbose flag for that.
Chang ownership of some directories so more of the build process
(namely, builds of include and libs) can be run without root
permission (we still depend on root permission to mount a memory
filesystem).
come from the installation document (of the release documentation)
not the readme. The installation document is the one that has the
content of the old FLOPPIES.TXT.
Pointy hat to: bmah
MFCs noted: cat(1) UNIX-domain sockets, dirpref.
While I'm here, group CVS-related items together in their own section
under userland contributed software.
as well. This works by selecting "md" or "vn" depending on "uname -r"
output, so we can use the same script on -CURRENT and -STABLE.
Also included minor bugfixes and code cleanup.
Testers welcome, as this code has only been tested on -STABLE
(and for this reason I am doing an immediate MFC).
move the ID string from a pubdate element into a comment on the
grounds that this document doesn't change rapidly enough to require
that the ID string to actually be rendered in the output.
solves a pretty annoying problem, this release notes entry doesn't
describe what this fixes because I can't seem to figure out how to do
this without giving a lot of background.
net/cvsupd-bin. Also note CVSup update to fix S1G bug.
I'm breaking a self-imposed rule of not mentioning ports-collection
updates in release notes. I'm only doing this because CVSup is a
fairly essential part of the FreeBSD Project infrastructure. Save
for exceptions such as this, the release notes will continue to
document changes to the base system only.
Suggested by: mike
so as to make the "picobsd" script less version-specific.
Improve handling of cross-builds (which requires creation of
includes and libraries for the new source tree).
The "picobsd" script will not probably work on -current because it still
uses 'vn' instead of 'md', but i am commiting it anyways to keep it
in sync with the version in -stable.
DESTDIR. This avoids redundant information in the path when DOCDIR
points to some directory that already implies (or specifies) a certain
language. This is the case with the web site, where the release notes
are already installed under a language-specific directory. This
behavior is not being made mandatory because it might still be useful
to install all the translations in one directory, such as during
testing, or in a hypothetical release notes archive. Furthermore, it
is not being made the default because that breaks consistency with
stuff under doc/.
Reviewed by: bmah
I guess I pooched the permissions on the scripts before committing them
since they're not executable and now it's too late to change (I think -
I suppose you could chmod the ,v files and it might inheirit but I don't
feel like asking the repomeisters to try that).
Noticed by: Dirk Froemberg <dirk@freebsd.org>
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
- build_x.sh now does all the steps to build an X dist rather than being
a child script of package_x_dists.sh
- Update the usage information to list the ports you need to install
before running this script as well as needing to set CVSROOT.
- Make sure CVSROOT is set. If not, exit with an error.
- We now take two parameters: a work directory and an output directory.
The work directory is used as scratch space. All of the bindist will
end up in the output directory.
- Only apply XF86.patch to the checked out XFree86 port if it exists.
- Use XFree86's build-bindist tool to package up the dists using their
distfiles rather than using our own packing lists that have to be
manually updated each time the port changes.
Example usage:
env CVSROOT=/home/ncvs ./build_x.sh /usr/xtmp /usr/x11dists
changes" section, but I'm not sure it's appropriate there. config(8)
is a userland utility, but this is actually a "kernel" feature. There
are release notes about config(8) in both sections, but "kernel" seems
more appropriate for this one.
1. Bring floppies.sgml section in-line into install.sgml, where it
makes more sense.
2. Slightly reorganize some sections of Installation section and
do some wordsmithing.
3. Update distribution layout to reflect RELNOTESng and new compat
distributions.
4. Update upgrade file list from 4-STABLE.
5. It's been a long time since 2.2.X; get rid of instructions dealing
with "new" handling of compatability slices and fix up other references
in the text.
6. Hunt down and kill emoticons with extreme prejudice. Try to
tone down the use of exclamation points.
7. Cross-reference new and improved Installation chapter in
Handbook.
8. Add a proper abstract for this document.
* Rename cvsup-bin to cvsup (cvsup-bin does not exist anymore).
* Add the net/rsync port to the CDROM packages.
* Add the misc/compat* ports.
Approved by: jkh
+ uses `mkisofs' rather than `mkhybrid' as the new mkisofs is the merger
of the two
+ checks for `setcdboot's existsance and tries to pkg_add it if needed
+ removes English contraction
Approved by: jkh
+ allows one to set _R so one can more easily make an iso after the fact,
in the directory `make release' was issued in
+ changes name from miniboot to miniinst since we make other bootable ISOs
also (and we might confuse someone)
Approved by: jkh
execute commands when the battery level changes, and point users at
the examples in /etc/apmd.conf since this stuff isn't (yet?)
documented in the manual page. Also note its MFC.
Submitted by: nsayer
support for Aironet 350, ed(4) support for Linksys cards, aac(4),
ssh(1) not SUID, passwd(1)/pw(8) support for passwd_format,
rc(8) deletes non-directories in /var/run and /var/spool/lock,
fmtcheck(3), sshd(8) X11Forwarding, sshd_config MaxStartups
deprecates ConnectionsPerPeriod.
Some of these MFCs are new, others were reflected in 4-STABLE's
release notes already, and still others were MFC-ed before prior
releases.
Relocate dgm->digi release note item to live next to digi.
Relocate an(4)/AIR350 note to be next to another an(4) entry.
Remove a duplicate entry documenting xargs(1) -J.
Port markup fixes: sysutils/cs9660_unicode, net/pim6dd, net/pim6sd.
all inetd.conf services disabled by default but now editable in
sysinstall(8).
Deleted an item about disabling selected services in inetd.conf, since
it was superceded by the above.
While I'm here, rename the "Security Fixes" section to "Security-Related
Changes".
content or whitespace changes; it just moves sections around for
better organization; the content of this file used to be fairly
fragmented because it originally was derived from parts of several other
documents.
The first half of "About FreeBSD" has been pulled into the Introduction
section. The remainder of "About FreeBSD" plus the "Release Documentation"
section now make up a new <sect1></sect1> level section entitled
"Further Reading".
document into article.sgml. Move the $FreeBSD$ tag from a
comment to a <pubdate></pubdate> entry, but no other content
or whitespace changes.
The two reasons for doing this are to: 1) Get rid of a bunch of
itty-bitty files and 2) help with a reorganization of the README that
will be much simpler if all the content is in a single file.
obrien 2001/07/21 10:38:46 PDT
Modified files:
release/alpha dokern.sh
Log:
Fix the install kernel on a 1.44MB floppy again.
I had to be aggressively Draconian to succeed.
I diked out:
+ Multia, NoName, PC/EB 64, Aspen Alpine support.
+ SCSI tape support
+ AMI MegaRAID controller support
+ All parallel bus support (includes PLIP)
+ vx (3c590, 3c595), pcn (AMD Am79C97x PCI 10/100), sf (Adaptec AIC-6915),
sis (SiS 900/SiS 7016), ste (Sundance ST201 (D-Link DFE-550TX)),
wb (Winbond W89C840F) support.
I didn't do this when I merged the delta to RELENG_4 because I thought
&merged; didn't apply to contributed software since there is one entry
per application which gets updated with the new version number, as
opposed to all the other programs, which get one entry per update.
However, the previous commit removed &merged; from the IPFilter entry,
so perhaps I just didn't look long enough when I did the tcpdump
merge.
as part of the release if MAKE_ISOS is set. Will also build the
first CD with packages (in addition to the "minimal" CD) if CD_EXTRA_BITS
points to them. This probably need a bit more work to get fully useful,
but it at least covers the basics for now.
As was done to i386/boot_crunch.conf:
+ Build with `lint' defined to cut out some of the `rcsid's (binaries' code
only, the libs will still have the `rcsid's in them).
+ mount_mfs is OBE.
+ Do not need libipx as I have conditionally diked that functional out of
ifconfig(8).
I had to be aggressively Draconian to succeed.
I diked out:
+ Multia, NoName, PC/EB 64, Aspen Alpine support.
+ SCSI tape support
+ AMI MegaRAID controller support
+ All parallel bus support (includes PLIP)
+ vx (3c590, 3c595), pcn (AMD Am79C97x PCI 10/100), sf (Adaptec AIC-6915),
sis (SiS 900/SiS 7016), ste (Sundance ST201 (D-Link DFE-550TX)),
wb (Winbond W89C840F) support.
If the removal of any of this support causes heartburn, please let me know.
only, the libs will still have the `rcsid's in them).
+ mount_mfs is OBE.
+ Do not need libipx as I have conditionally diked that functional out of
ifconfig(8).
only, the libs will still have the `rcsid's in them).
+ mount_mfs is OBE.
+ The Alpha install does not support SLIP, PCCARD or USB installs; so we do
not need the associated userland utils.
+ Do not need libipx as I have conditionally diked that functional out of
ifconfig(8).
language-dependant SGML catalogs (in ${LANG_CODE}/share/sgml) and also
use a default.dsl stylesheet similar to what the rest of the DocProj
documents use.
Requested by: hrs, Alex Kapranoff <kapr@acm.org>
Reviewed by: hrs, dd
MFC after: 2 days
# I have deliberately not mentioned the kernel compile directory move;
# people using buildworld aren't affected, and those that aren't had
# better be reading cvs-all and/or src/UPDATING.
NO_SENDMAIL flag if set. The whole NO_FOO mechanism in /usr/src
is pretty bogus and needs to be re-examined in the context of a
larger argument about modularity, but that's something for another
time.
Submitted by: Peter Pentchev <roam@orbitel.bg>
notes build. Instead of having doc.relnotes.mk make a guess, hardcode
quite a bit (but as little as possible) in Makefile.inc's sprinkled
strategicly throughout the tree. This has the advantage of actually
working properly (which is a Good Thing(tm)), and the disadvantages of
more files in the repository and more hardcoded paths (which are both
Bad Things(tm)).
I get a link error on in6addr_<something> and i cannot find the
symbol in any of the libraries. It might be my mistake, but in any
case the crunched binary would overflow the floppy, so...
This applies to -current only.
Make sure hints are statically compiled into the kernel,
because the bootloader is not available in picobsd and so the
hints file cannot be found at run time.
(This is kind of inconvenient if you have to handle non PnP devices,
but fortunately these days non-PnP ISA cards are disappearing...)
This must have to do with the use of devfs in -CURRENT, but i
have no idea when the devfs is actually mounted (is it a
side effect of mount -t nonfs or what ?) and when /dev/fd0c becomes
available.
For the time being, let's use this hack. Once I understand how devfs
works, this can be reverted back to the previous value, and also the
part of the build script which creates device entries can be nuked.
This is for -current only.
better place to handle dependencies.
Make another step at helping cross-compiling: when the user specifies
an alternate source tree, the script takes care of creating include
files and libraries for the new tree.
Furthermore, build and use a version of the "config" program which
matches the new sources.
It takes a long time to create libraries, and it might even not do
the right thing at once, there might be some dependencies that i
have forgotten. At any rate, with this code i have been able to
build a working picobsd image using -CURRENT sources on -STABLE
MFC after: 3 days
one Makefile variable to control the building/installation of both
the DocProj documents and RELNOTESng.
Suggested by: obrien, dd
Tested by: John Hay <jhay@icomtek.csir.co.za>
files).
Another diff will be forthcoming to fold the functionality of
NORELNOTES into NODOC.
Tested by: John Hay <jhay@icomtek.csir.co.za>
Pointy hat to: bmah
images get TXT renderings only; CDROM and FTP areas get TXT and HTML.)
Remove the old *.TXT release documentation files, as they
have been subsumed into RELNOTESng. The new layout will greatly
facilitate their maintenence and help keep them internally consistent.
support battery state monitoring, ncurses 5.2-20010512.
Woefully overdue release notes: ddb(4) show pcpu, telnet(1) autologin
and encryption defaults and -y option.
Tadayuki OKADA <tadayuki@mediaone.net>.
New release notes: USER_LDT on by default (this entry is way overdue).
Add Abocom URE 450 to supported USB Ethernet devices.
version control information that is different from the rest of their
containing document (or at least other sections). For release notes
only, allow output of <sect1info><pubdate></pubdate></sect1info>
text, and add it to three sections of RELNOTESng where it's kind of
important ("What's New" in the release notes, "Supported Device" in
the arch-independent hardware list, and the processors section of the
alpha hardware list).
1. Everywhere I could figure out what driver supported a device or
class of device, there is now a cross-reference via a &man entity.
For cases where a driver has no manpage (and hence no &man entity),
we now at least give the name of the driver. For the most part,
this was done by examining driver manpages.
2. A number of devices which are i386-only are now marked as such,
determined by noting manpages or kernel source files in
architecture-specific directories.
3. Added hardware supported by the vpo(4), wl(4), awi(4), and bktr(4)
drivers, based on a read of the manpages.
The manpages and source files in question were taken from 4-STABLE,
(which is what was running on my off-net laptop at the time)
but at this level of detail, I don't expect there to be any appreciable
differences between 4-STABLE and 5-CURRENT.
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.
This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.
This driver should also work on the alpha. It's not turned on in
GENERIC.
freed by softupdates, ifconfig(8) accepts CIDR notation, rc(8) clean-out
of /var/run and /var/spool/lock, c89(1) is now a binary, pax(1)
enhancements and cpio(1)/tar(1) compatability, Ukranian language console
support.
Other: Update/make (more) consistent the list of WaveLAN devices
supported.
MFCs noted: ln(1) -h/-n, find(1) timestamp flags.
the need to also create the entire ports tree during a `make release'.
The main motivation behind this is that handling the ports tree still
takes a huge amount of time due to the large number of directories
involved, even on modern disks.
The solution is to establish a list of dependent ports that are
minimally required. This list needs to be manually maintained in case
the doc ports toolchain changes, and has thus been broken out into a
separate file Makefile.inc.docports. (release/Makefile has gotten
overly lengthy already anyway.)
Discussed with: bmah, nik
Reviewed by: bmah
stylesheets (particularly with respect to translations) is now similar
to that of the doc/ tree. Added a customization for HTML page footers
(this is the only reader-visible change).
1. There is now only one RELNOTESng stylesheet; the architecture-specific
stylesheets (to handle different values of the arch= attribute) are gone.
2. Several Makefile variable definitions were factored into
doc.relnotes.mk.
Submitted by: dd
sk(4)) were reversed.
While I'm here, update list of cards supported by sk(4) to be consistent
with the manpage.
PR: docs/21700
Submitted by: neuf@lrs.e-technik.uni-erlangen.de
o Define a RELN_ROOT variable which points to the root of the relnotes
tree (i.e., src/release/doc).
o By default, define DOC_PREFIX in terms of RELN_ROOT; this gives a
bigger chance of finding the doc/ tree without help in the form of
setting DOC_PREFIX on the command line.
o Respect DOCDIR; `make install` works now.
Approved by: bmah
from the build cluster. These are required to get the dependencies the
same as the parallel builds.
- Add an optional second argument that allows you to specific an alternate
ports directory.
- Remove the temporary file after we are done with it.
- Remove ksh93 because it won't make it on the discs until the license issues
are resolved.
Approved by: jkh
Make listings of dc(4)-supported cards consistent with manpage
(submitted by fenner).
amr(4) supports the Dell PERC 3/DCL (submitted by
Vivek Khera <khera@kciLink.com>).
Properly capitalize "Ethernet" and variants thereof.
Add missing CMedia and Crystal Semiconductor sound chips (submitted by
orion).
Fix estimate of 5.0-RELEASE release date (submitted by dd).
ntpd(8) security fix cross-reference to SA-01:31.
Fix typo: s/maestreo3/maestro3/.
Fix ABOUT.TXT to be consistent with LAYOUT.TXT with respect to
the size of an unpacked ports collection (the stated 100MB
is a bit of an overestimate, but better to be conservative).
PR: 22778
Submitted by: David <ddavid@ican.net>
bugs fixed, fsck_ffs in background on mounted filesystems, TI-RPC,
portmap(8)->rpcbind(8), IPv6 support in NFS, lockd, rc(8) dependency
handling.
Synch up hardware devices with etc/defaults/pccard.conf 1.98.2.19
(yes, from RELENG_4). This change needs to be propagated to RELNOTESng.
/stand/etc on the mfsroot, and hence to /etc on the install target
disk for use during the install. It also links netconfig and services
into /etc on the mfsroot so that they are available to a fixit
shell.
Submitted by: iedowse
dependency order (submitted by sobomax), "lprm -" works for remote
printers, mergemaster(8) updates, ftpd(8) updates.
Also make sure ESS Maestro-3/Allegro is mentioned in appropriate
hardware lists (submitted by scottl).
and nodump flag, ISC DHCP client update to 2.0pl5, split(1) support
for large files, units(1) update, netstat(1) per-address packet
counting, manpage updates.
Fix up notes on Adaptec SCSI RAID and DPT SmartRAID V/VI SCSI RAID
controllers (reviewed by scottl).
This is needed even with `-o space' as the kernel decides to be "helpful"
and not really do space optimization. Looking at src/sys/ufs/ffs/ffs_alloc.c
we see why: if (fs->fs_minfree <= 5 ||
fs->fs_cstotal.cs_nffree >
(off_t)fs->fs_dsize * fs->fs_minfree / (2 * 100))
break;
log(LOG_NOTICE, "%s: optimization changed from SPACE to TIME\n"
I have picked `1' vs. `0' just incase some code somewhere has the assumption
the %free can never be `0'.
Helped with understanding why -m 1 made a different: imp
OpenSSL ASM optimizations, sysinstall preserving /etc/mail,
savecore -k, pkg_delete(1) now deletes in dependency order.
MFCs noted: ipfilter 3.4.16, ipfw(8) me, gperf 2.7.2,
lpr(1)/lpd(8)/syslogd(8)/logger(1) IPv6-capable,
bzip2(1) packages.
A few typo fixes were backported from RELNOTESng.
Preference was made to features that have been MFC-ed. I'll try to
get HEAD caught up to reality soon.
the commit logs - I just found the reason for the self-pointing symlink, as
documented in revision 1.517 by phk, who committed the change over a year
ago. Accordingly, put the feature back and drop all plans to MFC the previous
"fix".
asking what it's for and I can't answer since I can't see any conceivable
use for it. Unless someone corrects that impression, I'll also MFC this
change in a few days.
With these scripts i was able to build a _working_ image of a
bridge-like floppy image with a reasonable set of utilities
in it, despite the code size increase we have in 5.0
The scripts are slightly different from the previous ones especially
on the place where the kernel and binaries are built. Hopefully
this will not cause too much trouble to people (is there any???)
using the old scripts.
deprecated in sshd_config, cdcontrol(1) and CDROM, sysctl -N,
ports "origin", sysinstall->/usr/sbin.
Note MFC for LinkSys cards note, clarify and MFC syslogd(8) and
LOG_CONSOLE.
commands to build sysinstall manually during release.
- Get the sysinstall help files from /usr/src/usr.sbin/sysinstall/help
rather than ${.CURDIR}/sysinstall/help.
non-advertised option (F = "FreeBSD only"), and leave the A key with
standard partitioning. It seems people still want a runtime backdoo
to get to dangerously dedicated mode.
at people. This has been sitting in my tree for a few months now. I
have spoken with quite a few folks about this and the support for doing
this was pretty strong. I dont remember names though, so I cannot share
the blame :-(. Note that this does not *remove* DD mode, it just stops
waving it at new users. You can still set it via config files etc, and
the bootblocks and kernel still support it. You can still use disklabel
to make true DD disks.
new API for hardware volume control, VESA S3 framebuffer driver, logging
of wrong-interface ARP replies sysctl, NFS client bug fixed, BurnProof(TM)
for ATAPI drives, IPFW works with ECN bits, ihfc(4), itjc(4),
<sys/selinfo.h>, pthread_* strong references, unified libgcc, SSH bug
with X11 forwarding fixed, syslogd(8) and LOG_CONSOLE, rpcgen use of
/usr/bin/cpp, rc.syscons, burncd(8) -m and -l, dmesg(a).
MFCs noted: aac(4), OpenSSH 2.3.0.
consist of contiguous bits in little endian format. Before the fix
the netmask of 0xfffffff0 (0xf0ffffff in little endian format) was
displayed /24 instead of /28.
Also, add a missing include.
Submitted by: Maxime Soule <Maxime.Soule@IPricot.com>
one-way hash functions for authentication purposes. There is no more
"set the libcrypt->libXXXcrypt" nightmare.
- Undo the libmd.so hack, use -D to hide the md5c.c internals.
- Remove the symlink hacks in release/Makefile
- the algorthm is set by set_crypt_format() as before. If this is
not called, it tries to heuristically figure out the hash format, and
if all else fails, it uses the optional auth.conf entry to chose the
overall default hash.
- Since source has non-hidden crypto in it there may be some issues with
having the source it in some countries, so preserve the "secure/*"
division. You can still build a des-free libcrypt library if you want
to badly enough. This should not be a problem in the US or exporting
from the US as freebsd.org had notified BXA some time ago. That makes
this stuff re-exportable by anyone.
- For consistancy, the default in absence of any other clues is md5. This
is to try and minimize POLA across buildworld where folk may suddenly
be activating des-crypt()-hash support. Since the des hash may not
always be present, it seemed sensible to make the stronger md5 algorithm
the default.
All things being equal, no functionality is lost.
Reviewed-by: jkh
(flame-proof suit on)
- IP addresses are verified as being correct dotted quad format.
- Netmasks are verified as being in correct dotted quad or 0x* format,
and being consecutive 1 bits followed by consecutive 0 bits.
- The gateway is verified as being correct dotted quad format and
being reachable through the configured IP address and netmask.
no as a default. Sysinstall should be both less dangerous and less
annoying as a result of this change, though that's just my opinion
(since they're the defaults which annoy ME the least :).
OpenSSH->2.3.0 and PAM support, tcsh->6.10.0, elimination of emulation-
loading scripts, top(1) screen width fix, groff->1.16.1, growfs(8) and
ffsinfo(8), new indent(1) options.
Also fix a typo describing the Accton "Cheetah".
rc.conf: make the system recognise the MAC address and assign an IP
automatically from /etc/hosts (or ask the user)
sshd_config: don't do x11 forwarding.
Dike out support for DEC3000/300* Pelic* and the DEC3000/[4-9]00
Flamingo/Sandpiper families, SLIP, lance Ethernet (especially since `le'
based Alphas are diked out now too), POSIX P1003_1B real-time extentions,
and last but not least "NOBLOCKRANDOM" since the random device is removed.
This lets us fit [barely!]:
Filesystem 1K-blocks Used Avail Capacity iused ifree %iused Mounted
/dev/vnn0c 1407 1386 21 99% 6 24 20% /mnt
*** Filesystem is 1440 K, 21 left
*** 80000 bytes/inode, 24 left
Created /R/stage/floppies/kern.flp
The distribute target is basicly the same as an install. For
perl, this means that miniperl is needed. Since miniperl is
only present in the object directory, we need to make sure
the path is set correctly. To do this, we have make release
use a new distribworld target that sets the path before doing
a make distribute.
Remove `pmtimer' from the MFSROOT kernel as `apm' is already removed.
`pmtimer' also removed from the Alpha kernel incase it ever winds up there.
(could it ever?)
overwriting $PATH, and find mknod $PATH instead of hardcoding /sbin so
that the copy of MAKEDEV on the fixit floppy is usable, since mknod and
expr live in /mnt2/stand when the fixit floppy is running.
Get rid of the sed invokation in release/Makefile that attempts to
delete the PATH setting stuff from MAKEDEV on the fixit floppy. This
hasn't worked since a long ago change to MAKEDEV caused the sed
expression to no longer match.
PR: misc/21241
Deprecate the "global" crunch.inc file and the CRUNCHFLAGS global build
options. Tools not policy. Move these global settings out into each
picobsd distribution.
a per program basis allowing a greater control on what is built.
The buildopts file contains Makefile lines of form:
# Anything added to OPTS is added to every build rule.
OPTS= -DNOPAM
# These should only be added to the build of user-ppp.
ppp_OPTS= -DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM -DNOSUID \
-DHAVE_DES -DNORADIUS -DNOI4B -DNONETGRAPH
Really these should be added to crunch.inc, but that file is currently
optional, and if defined masks the global one. Next step will be to move
these global settings back out into the individual builds as OPTS, and
then migrate OPTS and prog_OPTS back into the local crunch.inc file.
standard or serial. This change needs to be done to the entire system that
depends on this. This way we don't have some code using OnVTY checks
and other doing
strcmp(variable_get(VAR_FIXIT_TTY), "standard") == 0
checks. Also we need to set VAR_FIXIT_TTY to "serial" if we come up on
a serial console.
Also fixed a dialog problem in that dialog was used when dialog was
disabled causing some troubles such as not letting the cursor keys
work when exiting the fixit mode on media (ie. not the fixit shell but
for example fixit on a floppy).
Submitted by: Doug Ambrisko <ambrisko@whistle.com>
PR: 22352
SCSI card (should it ever find its way into GENERIC); LPT (we don't need
to print during install time); the parallel 'geek' port; generic USB
driver (thus some attached USB devices will not be detected and thus the
user may wonder what is going on, we couldn't do anything with the device
if only ugen attached to it anyway and we are getting very, very low on
available space; USB "Human Interface Devices" as we don't do anything
with them during installation; and USB printers (same argument as LPT).
mimics that of tcpdump in that for normal builds, sendmail will only be
built once. For 'make release', it is built once for the bin dist and
once for the crypto dist. This method also removes the need for two separate
Makefiles (which could become out of sync).
Suggested by: bde
Assisted by: kris
Peter's new format, and I'd added hints files for each.
The build process uses the PICOBSD.hints file as well as the config,
and additionally builds with -DNO_MODULES. The build process
probably needs to be converted to use the 'buildkernel' method
instead of running config itself.
The kernels now compile. I've not been able to test the crunch
process however because it used the vn driver and there are no
/dev/vn device nodes under devfs yet. Maybe someone else could
give it a go.
rename the previous one to indicate that it's not just high, it's
extreme (everything off, secure level raised).
Submitted mostly by: Tony Finch <dot@dotat.at>
- STARTTLS support in sendmail
- Use sendmail's version of vacation
- mail.local no longer installed set-user-id root
- Disable EXPN/VRFY SMTP commands by default
- Copy sendmail/cf config building tree into /usr/share/sendmail/cf/
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
Approved by: jkh
Write kern_securelevel_enable variable to rc.conf if user selects
medium or low security in sysinstall. This overrides the case where a
user selects fascist security and then tries to go back to a lower
setting.
of the Am79c973 with "AlertIT Technology," whatever that is. Also mention
support for the PCnet/FAST III cards in the documentation. The
PCnet/FAST III chips have integrated 10/100 PHYs.
a default. This should prevent people from whacking return at
the Distributions menu and getting nothing selected as a result
(a minimal "standard" system will at least install).
Flagged as big tech support headache by: Chris Shumway <cshumway@osd.bsdi.com>
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from: NetBSD/pc98
appropriate(?) defaults for "low", "medium" and "high" security
environments. Medium is basically what we currently have with a little
seat-belt tightening where it made sense. Low is the same as medium but
without the tightening. High is positively fascist with nothing turned
on by default and an automatic call to 911 if it can find a modem.
really doesn't make any sense, what was I smoking) and allow
the more canonical usage of "any" for either side of the comparison
for release name or architecture (meaning you can also set CD_VERSION=any
in a cdrom.inf file to cause sysinstall to always match it and likewise
with the architecture, if specified).
Sensibly suggested by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
on Alpha, primarily in the storage adapter area. Things like
Soundblaster-attached CDs, WD7000 etc for example. Try to get RELNOTES
for alpha to reflect reality a bit more.
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
alpha: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, logger(1) support for
remote syslogs.
i386: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, boot98cfg(8),
logger(1) support for remote syslogs.
PR: 20628
Submitted by: bmah@cisco.com (Bruce A. Mah)
Reviewed by: nik
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
3.3.6 base distribution, some of the packing lists needed hacking so that
they would pack up everything in the right place. As a result, go ahead and
just add a directory for the packing lists. These are the i386 packing lists.
corresponding tarball from it. It uses the packing list name to determine
the tarball name. If the tarball name ends in 'gz', it will be gzipped, if
it ends in 'bz', it will be bzip2'd.
XFree86 3.3.6 into a scratch directory. The patch file patches the XFree86
port to not ask any questions and to actually be able to install some things
like the i810 server link kit bits. If you want XF86Setup to build, you
should have tk80 (not tk82) installed. If you want to XF86Setup_jp to build
you need to have ja-tk80 installed.
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
kernel config file.
- Add WORLD_FLAGS and KERNEL_FLAGS so you can build world and kernel with
extra make options such as -jX to speed up release builds.
- When building kernels, allow their hints to tag along, and use this to
install hints onto the boot floppy. Since the boot floppy doesn't load
loader.4th, we have to change device.hints to strip comments and change
each line to an explicit set command.
1. Correct FTP site for 4.0-stable snapshots and delete sentence
fragment immediately following.
[ not applicable to HEAD ]
2. Add FDDI section to table of contents (see #5 below) and add
one line of whitespace.
3. In userland section, document csh->tcsh, more->less, and
colorized ls.
4. In Ethernet section, do:
s/gigabit ethernet/Gigabit Ethernet/
s/fast ethernet/Fast Ethernet/
s/ethernet/Ethernet/
5. Pull DEC DEFPA/DEFEA *FDDI* cards out of the *Ethernet* section
and into their own second-level section.
6. Add missing period in section header in ATM section.
7. Tweak upgrading sectio with some new text, not sure if this is
much better though.
8. Add a blurb about the -stable mailing list.
[ changed to -current list in HEAD ]
PR: 20015
Submitted by: Bruce A. Mah <bmah@cisco.com>
the building of the crunched binary.
I'll add examples when I add the post-include mechanism, since the
crunch.mk environment stomps on the pre-included crunch.inc's variables
at the moment.
objects, to simplify working with PicoBSD.
Add the ability to put make instructions in crunch.inc to pass to the
build process.
Now explicitly make the objects in our own object tree, since we want to
build the objects with our own defines, and allow this to occur in a
common object tree for all PicoBSD builds, if required. This is
controlled by the COMM_OBJ variable, for those who don't want this -
setting it to /usr/obj again will just pick up the objects from your
last make buildworld, as before.
for read-only src tree.
While I'm there:
1) Use kgzip, not kzip, since kzip certainly doesn't make bootable
kernels anymore. loader still isn't built separately, let alone without
forth support. This needs to be fixed.
2) Expand the mount/vnconfig examples to be the defacto way of making
sure the filesystems are mounted, unmounted, or not configured. This
needs more work.
3) quieten the build substantially, so errors are more prominent
4) Start of '-j' ability. Current style isn't quite in the correct
dependency format for this, but obvious mistakes (changing directories
in main shell) are fixed.
Approved by: grog, dwhite, luigi (no objections to me doing a makeover)
over flowing its britches. So remove all ppbus bits except those for PLIP
(untested), and all USB bits as SRM does not know what USB is. Also remove
/dev/random as I don't think we need it just for whacking bits onto a disk.
Approved by: JKH
IPv6 configuration is only done by rtsol. Does someone really
need manual configuration? :-)
You can specify IPv6 DNS server as well.
We have only one server ftp7.jp.freebsd.org that speaks IPv6
in this time. ftp7.jp speaks IPv4 as well and also listed as
Japan #7.
Approved by: jkh
- Add a note about supporting USB out of the box during installs and
beyond.
- Add a note about the changes to the i386 bootstrap to work around the
1024 cylinder problem. Note that boot0 is now 2 sectors long.
Reminded by: kkenn
controller chip. This chip is currently being used on the NetGear
FA312-TX adapter, which I guess is a replacement for the FA310-TX
(PNIC-based).
I added support for this chip by modifying the sis driver since
the SiS 900 and the NS DP83815 have almost the same programming
interface (the RX filter programming and PHY access methods are
different, but the general configuration, DMA scheme and register
layout are identical).
I would have had this done a lot sooner, but getting the damn MAC
address out of the EEPROM proved to be more complicated than expected.
rc and login.conf files from the /etc directory on the floppy.
This prevents the overwrite yes/no prompt from occuring in gzip.
(some PicoBSD disks use gzip and some use minigzip, so the gzip -f flag (force)
is not an option. minigzip has a different meaning for the -f flag.}
- Small cleanups to kernel installs.
- Don't install kernel.config and loader.config on the boot floppy since
they haven't been used in quite some time.
src/release/{boot,fixit}_crunch.conf.
- Added machine specific fixit_crunch.conf for PC/AT and PC-98 to
src/release/$MACHINE.
- Use config file in src/release/$MACHINE if exist. If it does not exist,
use in src/release.
around with floppies. Also document (for lack of a more appropriate place/file)
the problems the installer has when other disks are present with a BSD
disk label on them. Please remove this warning when the problem is fixed.
PR: alpha/17642
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.
- Add PC-98 support.
TODO:
o Documentation
o Fix some messages for PC-98
o Decrease the size of fixit.flp to 1.2MB
o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html)
No response from jkh
setting 'usbd_enable' in rc.conf during nwe installs if USB is detected.
Also, since usbd already handles USB mice automatically, note that the
mouse setup section in sysinstall only applies to non-USB mice.
distfiles to build the docproj port during release. Prior to this, the
distfiles were copied froom ${DISTFILES}. However, if like me, you needed
to store the distfiles in some directory other than /usr/ports/distfiles,
for example /usr/docdistfiles, then when you overrode ${DISTFILES} it broke
the release build when it tried to build docproj port in the chroot'd
release area. To preserve backwards compatibility, DOCDISTFILES defaults
to the value of DISTFILES.
Ok'd by: jkh
. Bring PicoBSD up to date with -CURRENT reality.
. Make PicoBSD smart and not spam /dev/vn0 and /mnt. Now it uses the first
unused vn device and creates a temporary mountpoint in /tmp.
. Miscellaneous build cleanups and optimizations.
Unfortunately the bridge, isp, and router floppies are too big and need
the axe treatment. The install floppy needs updating to -CURRENT. Dial and
net build and (appear to) run OK. I will be adressing these in the
near future (unless someone beats me to it :-) ).
PR: misc/17737
Submitted by: Omachonu Ogali <oogali@intranova.net>
hostname of the FTP server; that is the proxy's job. This temporarily
deletes the nameserver variable before calling mediaSetFTP.
PR: 17371
Approved by: jkh
Approved by: jkh
You can't enable 'emulate 3 button' option for moused in sysinstall.
This adds a menu option to set moused_flags and the help text explains
that entering "-3" will enable this feature.
the ports and doc trees. There is no change if we are not building a
release (i.e., we are not using a tag of the form RELENG_ver_RELEASE
--e.g., a RELENG_ver tag used to build a snapshot).
This should allow the ports and doc freezes during the release cycles
to be somewhat shorter, as commits to those (non-branched) trees can
resume as soon as the tags are laid down.
Reviewed by: nik
Approved by: jkh
be detected by netscape and such.
PR: bin/17659
Submitted by: Murray Stokelay <murray@cdrom.com>
Approved by: jkh
jkh made updates that conflict with the submitters patch, so I updated
accordingly, any mistakes are mine, not the submitters.
for generating /boot/kernel.conf. Since this structure is shared, move
its definition out to a header file, just as struct isa_device was defined
in a header file. This fixes the sysinstall breakage in -current.
on locale.
o Allow use of "G" in label editor to stand for gigabytes. This
is actually an unrelated patch which I meant to commit separately
but what the heck, it's late.
Partially submitted by: phk
straight into debug mode if you boot -v. Also conditionalize some
annoying debugging output now that we have this ability.
Partially submitted by: msmith
Approved by: jkh [to make certain wise-acres happy ;)]
a distribution, recognize it and treat as fatal media error. This
happens in the case of a timeout on FTP installations where the
user chooses not to select another FTP site, and resulted in
segmentation fault.
Approved by: jkh
structure.
These changes have been discussed with Greg Lehey and posted on
freebsd-small (most things in the PicoBSD tree were already broken
so things can only improve!)
Approved-By: jordan
Applied modified patch, since ATA/ATAPI is the keyword nowadays.
PR: 16507
Submitted by: Dan Papasian <bugg@bugg.strangled.net>
No need for an OK since we can exercise our divine rights as docpersons
according to: jkh
Oh why did I select a first project that needed to touch release/Makefile..
The fact that my release-building Alpha panics on me does not help either :(
in [i386,alpha]HARDWARE.TXT. This particular file is destined to be
the generic HARDWARE.TXT. In [i386,alpha]HARWDARE.TXT the machdep
information will live from now on. This should fix the make release
failures people were experiencing.
Reviewed by: Peter Wemm
and concat these to the corresponding generic *.TXT living in ./texts
This is currently aimed at HARDWARE.TXT but works for things like RELNOTES.TXT
too.
Reviewed by: jkh
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.
Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).
Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
with kld etc just fine, but tracebacks would have less information and
nm /kernel wouldn't be so good).
- Just strip the kernel on the boot disk. This does not affect kld or
module loading, there are two symbol tables in a kernel. There is the
dynamic linking one (.dynsym+.strtab) with just global symbols and a user
symbol table (.symtab+.strtab) with all symbols. BTW; objdump lies and
hides the second one. There's a good half a meg or so that can be saved
from an average kernel by stripping it.
ethernet adapters that are supported by the aue and kue drivers.
There are actually a couple more out there from Accton, Asante and
EXP Computer, however I was not able to find any Windows device
drivers for these on their servers, and hence could not harvest
their vendor/device ID info. If somebody has one of these things
and can look in the .inf file that comes with the Windows driver,
I'd appreciate knowing what it says for 'VID' and 'PID.'
Additional adapters include: the D-Link DSB-650 and DSB-650TX, the
SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101.
These are all mentioned in the man pages, relnotes and LINT.
Also correct the date in the kue(4) man page. I wrote this thing
on Jan, 4 2000, not 1999.
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
working. It was, as I predicted, a stupid bug and thanks to the
submitter for spotting it. I'll also re-roll some 3.4-RELEASE install
floppies for this.
originally done to track down yet another case of lost init, and is
not strictly necessary, but it seems more logical to have binaries in
/sbin than in /stand. Previously /sbin and /bin were symlinks to
/stand. Now /bin and /stand are symlinks to /sbin.
as a preprocessor variable only. This broke the build of ppp. This
problem still exists in the old-style directories.
Debugging-help-supplied-by: brian
originally done to track down yet another case of lost init, and is
not strictly necessary, but it seems more logical to have binaries in
/sbin than in /stand. Previously /sbin and /bin were symlinks to
/stand. Now /bin and /stand are symlinks to /sbin.
only way to be sure the build works correctly is to do a 'make all'.
But with these changes, it's easier to test individual targets. In
particular, ensure that the vnode file systems are mounted before
writing to them.
Ensure that we don't get CVS directories on our floppies.
Use kgzip instead of kzip to compress the loader. This saves a few
kB.
Remove some test cruft.
Kill duplicates for programs that have been in the boot crunched image
as well as on the fixit floppy (pwd, newfs, hostname, test). Our
space is really too valuable to have them around there twice. I doubt
pwd needs to be there at all since it's a builtin into sh(1) anyway
(oh, and the same applies to test(1) IIRC), but heck, leave them by
now.
Use the new `fixit' target in MAKEDEV to create the /dev nodes on
the floppy, instead of including the kitchensink...
Finally, tune the values used for creating the floppy. I currently
end up with
Filesystem 1K-blocks Used Avail Capacity iused ifree %iused
/dev/vnn0c 1363 1301 -47 104% 368 14 96%
...which is not quite ideal yet, but at least a working configuration
again.
as redoing all the menus to have proper, or at least non-hallucinogenic,
keyboard accelerators.
This requires my recent update to libdialog to work properly and will
probably also exhibit some other "interesting" behavior while the last
few missing screen clears are found (which is why I'm not going to MFC
immediately). At least now, however, sysinstall does not gratuitously
redraw random screens at the drop of a hat and drive serial console
installers out of their minds.
using make instead of custom scripts) and two floppies instead of
one. The resultant floppy can do everything that the individual
floppies (dial, net, install, isp, router) could do, modulo some bit
rot that has occurred since PicoBSD last compiled. It also includes
all the programs on the fixit floppy, which could thus also die.
/bin currently contains the following files:
-sh dump ln ns sps
[ ed login ping stty
badsect ex ls ps swapon
cat expr mkdir pwd sync
chgrp fdisk mknod pwd_mkdb sysctl
chmod find more rdump syslogd
chown fsck mount reboot tar
chroot ftp mount_cd9660 restore telnet
clri getty mount_msdos rlogin telnetd
cp grep mount_nfs rm test
date gunzip mount_std rmdir traceroute
dd gzip msg route umount
dev_mkdb hostname mt routed vi
df ifconfig mv rrestore view
dhclient inetd natd rsh vm
dhclient-script init netstat sed w
disklabel kget newfs sh zcat
dmesg kill nfs sleep
Structure is in place for using the same build for the other
directories, but I'm no longer sure we need this. The current first
floppy will run fine by itself, but the size of a compressed kernel
has increased by nearly 50% since 3.2, and there's not much space for
anything useful on the remainder of the floppy. The current method
creates a larger mfs and can read as many floppies as the user can
stand. The footprint appears to be round 14 MB.
using make instead of custom scripts) and two floppies instead of
one. The resultant floppy can do everything that the individual
floppies (dial, net, install, isp, router) could do, modulo some bit
rot that has occurred since PicoBSD last compiled. It also includes
all the programs on the fixit floppy, which could thus also die.
/bin currently contains the following files:
-sh dump ln ns sps
[ ed login ping stty
badsect ex ls ps swapon
cat expr mkdir pwd sync
chgrp fdisk mknod pwd_mkdb sysctl
chmod find more rdump syslogd
chown fsck mount reboot tar
chroot ftp mount_cd9660 restore telnet
clri getty mount_msdos rlogin telnetd
cp grep mount_nfs rm test
date gunzip mount_std rmdir traceroute
dd gzip msg route umount
dev_mkdb hostname mt routed vi
df ifconfig mv rrestore view
dhclient inetd natd rsh vm
dhclient-script init netstat sed w
disklabel kget newfs sh zcat
dmesg kill nfs sleep
Structure is in place for using the same build for the other
directories, but I'm no longer sure we need this. The current first
floppy will run fine by itself, but the size of a compressed kernel
has increased by nearly 50% since 3.2, and there's not much space for
anything useful on the remainder of the floppy. The current method
creates a larger mfs and can read as many floppies as the user can
stand. The footprint appears to be round 14 MB.
Work-sponsored-by: Sitara Networks Inc.
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.
This also completes my quest to convert things to miibus and add
Alpha support.
mention of the various devices that are supported.
Add some text and entry to LINT for 'controller mca0'.
I'd like to turn this option on in GENERIC as well as it
isn't impacting and has a small footprint.
- Add AMI and Mylex RAID controllers
- Reflect the demise of the 'eg' and 'ft' drivers
- Various minor cleanups
- Add some initial Microchannel information (this could do with some
fleshing out)
slice, partition, newfs, and install FreeBSD from a tarball on a remote server.
Handy for doing mass-installs for server farms.
Documentation following shortly.
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).
Also updated various documentation to mention the AN985 and created
a loadable module.
I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
made only the most superficial changes so far to HARDWARE.TXT and
eliminated the stuff I absolutely knew didn't work. That still leaves
a lot of work to do and this is mostly just a place-holder for now.
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.
The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."
This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.
This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
I backed-out the changes in -current and didn't touch stable at all (I
thought I had my patch order reversed, not what actually happened).
AIEEE! I can't even blame the crack for this one since I broke my
crack pipe a few weeks ago. I think sleep deprivation gets the blame
for this one.
Medal for noticing this one goes to: Jim Bloom <bloom@acm.org>
bringing in DHCP support. The only thing I left out were Poul-Henning's
newfs changes since I'm not sure if he's brought the rest of that support
into -stable yet. If it turns out that this is the case, I'll MFC those
changes too.
Set ALLLANG to install all the languages, otherwise set DOC_LANG
to just the languages (and encodings) you want to install.
Default to building the html-split (lots of small HTML files, with
links to go between them), html (one big honking HTML file), and plain
text versions of the documentation. Does not compress any of the docs
prior to doing the installation.
Testing and feedback: Jack O'Neill <jack@germanium.xtalwind.net>,
Cockups and typos: nik
. Now builds on -STABLE (-CURRENT is broken due to bugs)
. etc directory contents centralized instead of in each
type directory (can exclude & override as desired)
. Removed extraneous language files (lang files for rc really necessary?)
. dialog-based build tool with support for custom floppy builds
. MFS image loads as a mfs_root module instead of compiled into kernel
THIS IS BROKEN ON CURRENT. I'll MFC to -STABLE immediately following.
luigi tells me I have an OK from jkh on the MFC.
Submitted by: luigi
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)
This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.
The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
in a previous FreeBSD version. That never happened. Document that
it is due to be replaced, but leave it open-ended as to when.
Also do some mdoc cleanup.
PR: docs/13148
PR: docs/13144
Submitted by: Lee Cremeans <lcremeans@erols.com>
Alex M. Zelkim <phantom@cris.net>
Discussed with: jkh
Originally submitted by: Wayne Self <wself@cdrom.com>
Allow a ppp startup option in rc.conf.
Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.
Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.
The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.
This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
ifconfig, essentially stealing the lease until the user goes and changes
it. The alternative, sadly, is total dysfunction since bpf isn't in
GENERIC and network connectivity would otherwise fail completely on first
bootup when DHCP configuration was attempted again.
The ultimate answer here is to make either bpf a loadable kernel module
(which security conscious admins will be able to simply remove from /modules)
or come up with a lighter weight mechanism just for dhcp and other apps that
need to see broadcast packets but not otherwise sniff the wire in full
bpf glory.
in some code from C. Stone to parse the lease information. This is still
a WIP and this commit is largely intended to allow others to sync up; the
dhclient code still only works when doing dhcp configuration post-install
and requires a bit more work on the boot floppy before it will truly
work in the minimal bootstrapping role.
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.
The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)
Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).
There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.
A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
a ports tree which was installed initially with the system later,
but this is probably not the general case (user CVSups the repository
rather than the checked-out bits) and it's penalizing everyone else
with excessive inode consumption.
similar to the PNIC I (supported by the pn driver). In fact, it's really
a Macronix 98715A with wake on LAN support added. According to LinkSys,
the PNIC II was jointly developed by Lite-On and Macronis. I get the
feeling Macronix did most of the work. (The datasheet has the Macronix
logo on it, and is in fact nearly identical to the 98715 datasheet, except
for the extra wake on LAN registers.) In any case, the PNIC II works just
fine with the Macronix driver.
The changes are:
- Move PCI ID for the PNIC II from the pn driver to the mx driver.
- Mention PNIC II support in mx.4.
- Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
removal of bio, tty, net
removal of quotes
switches from isa? to nexus? or atkbdc?
additional comments
These bring the kernel config files in sync with those in
RELENG_3
- Mention that the 6Mbps turbo adapters are supported in HARDWARE.TXT
and RELNOTES.TXT and the wi.4 man page
- Mention turbo adapters in the wicontrol.8 man page and provide a
complete table of available transmit speed settings
ADMtek AL981 "Comet" chipset. The AL981 is yet another DEC tulip clone,
except with simpler receive filter options. The AL981 has a built-in
transceiver, power management support, wake on LAN and flow control.
This chip performs extremely well; it's on par with the ASIX chipset
in terms of speed, which is pretty good (it can do 11.5MB/sec with TCP
easily).
I would have committed this driver sooner, except I ran into one problem
with the AL981 that required a workaround. When the chip is transmitting
at full speed, it will sometimes wedge if you queue a series of packets
that wrap from the end of the transmit descriptor list back to the
beginning. I can't explain why this happens, and none of the other tulip
clones behave this way. The workaround this is to just watch for the end
of the transmit ring and make sure that al_start() breaks out of its
packet queuing loop and waiting until the current batch of transmissions
completes before wrapping back to the start of the ring. Fortunately, this
does not significantly impact transmit performance.
This is one of those things that takes weeks of analysis just to come
up with two or three lines of code changes.
on CDs and FTP sites.
o Collapse some redundant code.
o Fix typo'd menu.
o Restrict searches properly to packages rather than categories.
o Small tweaks to signal handling.
All RELENG_3 candidates.
I simply forgot that I'd already proven this to be a "really good idea that
unfortunately didn't work at all" the *last* time I tried it. Now
I remember. Hmmm. I WILL defeat this evil problem.
RealTek 8029, NetVin 5000, Winbond W89C940, Surecom NE-34, VIA VT86C926.
(checked with Bill Paul)
Mention the Brooktree Bt878 is supported by the Bt848 driver.
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.
This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)
Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
William Lloyd. New features include:
* many additional command line options
* "fetch" mode
* less bugs :-)
* better README.
Submitted by: William Lloyd <wlloyd@lap.net>
Reviewed by: abial
"passwordtime" is what passwd(1) has actually been using. I suspect
passwordperiod was the original intent. I can't figure-out which,
if either, BSDi uses. If anyone knows...
Enable MS-CHAP support.
release/Makefile:
Build a separate NOCRYPT version of pppd, to keep This Great
Nation's top-secret cryptographic tools out of the filthy hands
of those evil furriners.
feature of packages now so that no version info is embedded.
o Add a default X desktop menu offering afterstep, enlightenment, KDE, GNOME
and Windowmaker desktops instead of the boring twm(1) based one if the
user so chooses. This will require a little testing.
1. Enable use of serial console for installation by using autoboot
instead of boot.
2. Beep when the mfs root floppy needs to be placed in the fdd.
3. Beep again when mfs root image is loaded and the loader waits
for ten seconds before it starts booting for any input. (Serial
console users can say " boot -h" here.)
Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed
gigabit ethernet adapters out there which use the Alteon chipset so
this driver covers a fair amount of hardware. I know that it works with
the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also
work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit
ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and
and Sun boards. The Netgear board is the cheapest (~$350US) but still
yields fairly good performance.
Support is provided for jumbo frames with all adapters (just set the
MTU to something larger than 1500 bytes), as well as hardware multicast
filtering and vlan tagging (in conjunction with the vlan support in
-current, which I should merge into -stable soon). There are some hooks
for checksum offload support, but they're turned off for now since
FreeBSD doesn't have an officially sanctioned way to support checksum
offloading (yet).
I have not added the 'device ti0' entry to GENERIC since the driver
with all the firmware compiled in is quite large, and it doesn't really
fit into the category of generic hardware.
to now detect that CD you just remembered to put in the drive or that
pccard NIC that you've inserted (anybody can put pccardd in an mfsroot image
now you know.. :)
Requested by: Annelise Anderson <andrsn@andrsn.Stanford.EDU>
orthogonal to the other entries).
Clean up X selection code a bit.
Choose proper architecture subdirectories on mirror sites now that we've
gone fully to the new multi-arch directory scheme.
Now we know which variables are internal and which need to be
backed to /etc/rc.conf.site. rc.conf is not touched now.
Also kget kernel change information back properly and set up a loader.rc
file to use it.
for those folks with large floppy drives, LS-120s or CDROMs. Everyone
else will now have to use kern.flp & mfsroot.flp to install from.
We've held this off as long as possible and there's just no more fat
to trim. :( I'll look at increasing the mfsroot size too later, depending
on how well it compresses.
and Racore 8148 adapters are now supported by the ThunderLAN driver.
The 8165 is just a plain vanilla 10/100 card; the 8148 is a 'multi-
personality' adapter which can support 10baseT, 100baseTX and 100baseFX
if you include the proper modules.
Also update the tl man page to mention the Racore cards.
files. They are now both basically the same. I also modified the driver
list in HARDWARE.TXT: add the adw and isp drivers, and indicate that the
uha driver isn't yet supported under CAM.
This includes specific mention of all supported NCR and BusLogic models,
additional qualification of the supported DPT and QLogic models, and some
additions to the list of supported onboard Adaptec chips.
The hope is, of course, that this will lead to fewer questions like "is the
froboz SCSI controller supported?"
I think the formatting of the new entries looks okay, but someone with a
better eye for things like that might want to look at this.
rebadged Future Domain card that is not supported.
Also, only the DPT SmartRAID III and IV are supported. (The SmartRAID V
isn't yet supported by the DPT driver.)
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.
For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)
FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.
Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
as a RealTek 8139
if_rlreg.h: use bus_space_read_X() in CSR_READ_X() macros instead of
directly calling inb()/outb() etc...
rl.4 + RELNOTES.TXT: mention that SMC EtherEZ PCI 1211-TX is supported
by the RealTek driver
copying of these files from the parent directory. Let us all now
observe a brief moment of silence. OK, that's long enough.
Jordan will adjust the Makefiles appropriately and then "cvs rm" the
originals.
PCI fast ethernet adapters, plus man pages.
if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100,
various other PNIC devices
if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various
other boards based on the Macronix 98713, 98713A, 98715, 98715A
and 98725 chips
if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and
Rhine II chips (note: the D-Link and certain other cards
that actually use a Rhine II chip still return the PCI
device ID of the Rhine I. I don't know why, and it doesn't
really matter since the driver treats both chips the same
anyway.)
if_wb.c: Trendware TE100-PCIE and various other cards based on the
Winbond W89C840F chip (the Trendware card is identical to
the sample boards Winbond sent me, so who knows how many
clones there are running around)
All drivers include support for ifmedia, BPF and hardware multicast
filtering.
Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and
sysinstall device list.
I also have a driver for the ASIX AX88140A in the works.
