event loop and should sleep only when waiting for events (eg. via kevent(2)).
When a program is going to sleep in the kernel, the script will show its name,
PID, kernel stack trace and userland stack trace. Sleeping in kevent(2) is
ignored as it is expected to be valid.
Sample output:
# ./blocking lynxd
lynxd(15042) is blocking...
kernel`_cv_wait_sig+0x124
kernel`seltdwait+0xae
kernel`sys_poll+0x3a3
kernel`amd64_syscall+0x343
kernel`0xffffffff806c79ab
lynxd`poll+0xa
lynxd`pqSocketCheck+0xa2
lynxd`pqWaitTimed+0x29
lynxd`connectDBComplete+0xd7
lynxd`PQsetdbLogin+0x2ec
lynxd`db_connect+0x3c
lynxd`main+0x198
lynxd`_start+0x16f
0x2
lynxd(1925) is blocking...
kernel`_cv_wait+0x125
zfs.ko`zio_wait+0x5b
zfs.ko`dmu_buf_hold_array_by_dnode+0x1dc
zfs.ko`dmu_read+0xcb
zfs.ko`zfs_freebsd_getpages+0x37b
kernel`VOP_GETPAGES_APV+0xa7
kernel`vnode_pager_getpages+0x9a
kernel`vm_fault_hold+0x885
kernel`vm_fault+0x77
kernel`trap_pfault+0x211
kernel`trap+0x506
kernel`0xffffffff806c76c2
lynxd`EVP_add_cipher+0x13
lynxd`SSL_library_init+0x11
lynxd`main+0x94
lynxd`_start+0x16f
0x2
lynxd(1925) is blocking...
kernel`_cv_wait+0x125
zfs.ko`zio_wait+0x5b
zfs.ko`dbuf_read+0x791
zfs.ko`dbuf_findbp+0x12f
zfs.ko`dbuf_hold_impl+0xa2
zfs.ko`dbuf_hold+0x1b
zfs.ko`dmu_buf_hold_array_by_dnode+0x153
zfs.ko`dmu_read_uio+0x66
zfs.ko`zfs_freebsd_read+0x3a3
kernel`VOP_READ_APV+0xa1
kernel`vn_read+0x13a
kernel`vn_io_fault+0x10b
kernel`dofileread+0x95
kernel`kern_readv+0x68
kernel`sys_read+0x63
kernel`amd64_syscall+0x343
kernel`0xffffffff806c79ab
lynxd`_read+0xa
lynxd`__srefill+0x122
lynxd`fgets+0x78
lynxd`file_gets+0x1d
lynxd`BIO_gets+0x64
lynxd`PEM_read_bio+0xf5
lynxd`PEM_X509_INFO_read_bio+0x90
lynxd`X509_load_cert_crl_file+0x47
lynxd`by_file_ctrl+0x2e
lynxd`X509_STORE_load_locations+0x4a
lynxd`sslctx_init+0x255
lynxd`main+0x215
lynxd`_start+0x16f
0x2
Requested by: gnn
Obtained from: Wheel Systems http://wheelsystems.com
Now run(4) fetches parameters from ic->ic_wme.wme_params array, which is never initialized
(and can be safely removed). This patch replaces &ic->ic_wme.wme_params with
&ic->ic_wme.wme_chanParams.cap_wmeParams (contains parameters for local station;
used by other drivers with WME support).
Tested:
* me: STA: run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 38:83:45:11:78:ae
Now device will use retry limit, which is set via 'ifconfig <interface>
maxretry <number>'.
Tested:
* Tested on WUSB54GC, STA mode.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3689
The MAC can be fetched from the key struct.
I added the ndis updates to make it compile.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3657
This diff includes:
* Transmitter Addresses, Keys and TKIP MIC addition to the Security Key Table.
* Proper SEC Control Registers initialization and maintenance.
* Additional flags and values in TX descriptor, which are required for encryption support.
* Error checking in RX path.
Tested:
* Tested on WUSB54GC, STA (WEP, TKIP, CCMP), HOSTAP (CCMP) and IBSS (CCMP, WPA-None) modes.
* rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, STA mode (CCMP+TKIP)
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3640
Note: I manually had to merge this; I merged in the "put beacon_offsets
into vap" commit before this.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3628
Don't override the NIC MAC address with an overridden MAC address for
a VAP.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3625
Tested:
* rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, STA mode
Note: haven't tested AP mode yet; will do once the rest of the
AP mode / power save commits are in.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3624
Move the mbuf free responsibility to the caller of the hardware xmit
function, not the hardware xmit function itself.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3621
catches cases that DAD probes cannot be sent because of
IFF_UP && !IFF_DRV_RUNNING.
- nd6_dad_starttimer() now calls nd6_dad_ns_output(), instead of
calling it before nd6_dad_starttimer().
- Do not release an entry in dadq when a duplicate entry is being
added.
Before r278702 prefetch was blocked for I/Os > 1MB, after -- >= 1MB.
1MB I/Os are used for bulk operations in CTL (XCOPY, VERIFY), and disabling
prefetch for them reduced the performance.
This is temporary local patch, that should be replaced when upstreamed.
Discussed with: mahrens
MFC after: 3 days
* Remove unused sc_txtap_len/sc_rxtap_len fields.
* Remove unused ackrate variable.
* Remove unneded warning in rum_update_mcast().
* Use nitems().
* Replace some hardcoded values for RT2573_MAC_CSR1 register.
* Remove second argument for RUM_LOCK_ASSERT() - it is always the same.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3605
