* ci: enable fullyparallel mode for server tests
Replace os.Setenv, os.Chdir, and global state mutations with
parallel-safe alternatives (t.Setenv, t.Chdir, test hooks) across
37 files. Refactor GetLogRootPath and MM_INSTALL_TYPE to use
package-level test hooks instead of environment variables.
This enables gotestsum --fullparallel, allowing all test packages
to run with maximum parallelism within each shard.
Co-authored-by: Claude <claude@anthropic.com>
* ci: split fullyparallel from continue-on-error in workflow template
- Add new boolean input 'allow-failure' separate from 'fullyparallel'
- Change continue-on-error to use allow-failure instead of fullyparallel
- Update server-ci.yml to pass allow-failure: true for test coverage job
- Allows independent control of parallel execution and failure tolerance
Co-authored-by: Claude <claude@anthropic.com>
* fix: protect TestOverrideLogRootPath with sync.Mutex for parallel tests
- Replace global var TestOverrideLogRootPath with mutex-protected functions
- Add SetTestOverrideLogRootPath() and getTestOverrideLogRootPath() functions
- Update GetLogRootPath() to use thread-safe getter
- Update all test files to use SetTestOverrideLogRootPath() with t.Cleanup()
- Fixes race condition when running tests with t.Parallel()
Co-authored-by: Claude <claude@anthropic.com>
* fix: configure audit settings before server setup in tests
- Move ExperimentalAuditSettings from UpdateConfig() to config defaults
- Pass audit config via app.Config() option in SetupWithServerOptions()
- Fixes audit test setup ordering to configure BEFORE server initialization
- Resolves CodeRabbit's audit config timing issue in api4 tests
Co-authored-by: Claude <claude@anthropic.com>
* fix: implement SetTestOverrideLogRootPath mutex in logger.go
The previous commit updated test callers to use SetTestOverrideLogRootPath()
but didn't actually create the function in config/logger.go, causing build
failures across all CI shards. This commit:
- Replaces the exported var TestOverrideLogRootPath with mutex-protected
unexported state (testOverrideLogRootPath + testOverrideLogRootMu)
- Adds exported SetTestOverrideLogRootPath() setter
- Adds unexported getTestOverrideLogRootPath() getter
- Updates GetLogRootPath() to use the thread-safe getter
- Fixes log_test.go callers that were missed in the previous commit
Co-authored-by: Claude <claude@anthropic.com>
* fix(test): use SetupConfig for access_control feature flag registration
InitAccessControlPolicy() checks FeatureFlags.AttributeBasedAccessControl
at route registration time during server startup. Setting the flag via
UpdateConfig after Setup() is too late — routes are never registered
and API calls return 404.
Use SetupConfig() to pass the feature flag in the initial config before
server startup, ensuring routes are properly registered.
Co-authored-by: Claude <claude@anthropic.com>
* fix(test): restore BurnOnRead flag state in TestRevealPost subtest
The 'feature not enabled' subtest disables BurnOnRead without restoring
it via t.Cleanup. Subsequent subtests inherit the disabled state, which
can cause 501 errors when they expect the feature to be available.
Add t.Cleanup to restore FeatureFlags.BurnOnRead = true after the
subtest completes.
Co-authored-by: Claude <claude@anthropic.com>
* fix(test): restore EnableSharedChannelsMemberSync flag via t.Cleanup
The test disables EnableSharedChannelsMemberSync without restoring it.
If the subtest exits early (e.g., require failure), later sibling
subtests inherit a disabled flag and become flaky.
Add t.Cleanup to restore the flag after the subtest completes.
Co-authored-by: Claude <claude@anthropic.com>
* Fix test parallelism: use instance-scoped overrides and init-time audit config
Replace package-level test globals (TestOverrideInstallType,
SetTestOverrideLogRootPath) with fields on PlatformService so each test
gets its own instance without process-wide mutation. Fix three audit
tests (TestUserLoginAudit, TestLogoutAuditAuthStatus,
TestUpdatePasswordAudit) that configured the audit logger after server
init — the audit logger only reads config at startup, so pass audit
settings via app.Config() at init time instead.
Also revert the Go 1.24.13 downgrade and bump mattermost-govet to
v2.0.2 for Go 1.25.8 compatibility.
* Fix audit unit tests
* Fix MMCLOUDURL unit tests
* Fixed unit tests using MM_NOTIFY_ADMIN_COOL_OFF_DAYS
* Make app migrations idempotent for parallel test safety
Change System().Save() to System().SaveOrUpdate() in all migration
completion markers. When two parallel tests share a database pool entry,
both may race through the check-then-insert migration pattern. Save()
causes a duplicate key fatal crash; SaveOrUpdate() makes the second
write a harmless no-op.
* test: address review feedback on fullyparallel PR
- Use SetLogRootPathOverride() setter instead of direct field access
in platform/support_packet_test.go and platform/log_test.go (pvev)
- Restore TestGetLogRootPath in config/logger_test.go to keep
MM_LOG_PATH env var coverage; test uses t.Setenv so it runs
serially which is fine (pvev)
- Fix misleading comment in config_test.go: code uses t.Setenv,
not os.Setenv (jgheithcock)
Co-authored-by: Claude <claude@anthropic.com>
* fix: add missing os import in post_test.go
The os import was dropped during a merge conflict resolution while
burn-on-read shared channel tests from master still use os.Setenv.
Co-authored-by: Claude <claude@anthropic.com>
---------
Co-authored-by: Claude <claude@anthropic.com>
Co-authored-by: wiggin77 <wiggin77@warpmail.net>
Co-authored-by: Mattermost Build <build@mattermost.com>
* TestPool
* Store infra
* Store tests updates
* Bump maximum concurrent postgres connections
* More infra
* channels/jobs
* channels/app
* channels/api4
* Protect i18n from concurrent access
* Replace some use of os.Setenv
* Remove debug
* Lint fixes
* Fix more linting
* Fix test
* Remove use of Setenv in drafts tests
* Fix flaky TestWebHubCloseConnOnDBFail
* Fix merge
* [MM-62408] Add CI job to generate test coverage (#30284)
* Add CI job to generate test coverage
* Remove use of Setenv in drafts tests
* Fix flaky TestWebHubCloseConnOnDBFail
* Fix more Setenv usage
* Fix more potential flakyness
* Remove parallelism from flaky test
* Remove conflicting env var
* Fix
* Disable parallelism
* Test atomic covermode
* Disable parallelism
* Enable parallelism
* Add upload coverage step
* Fix codecov.yml
* Add codecov.yml
* Remove redundant workspace field
* Add Parallel() util methods and refactor
* Fix formatting
* More formatting fixes
* Fix reporting
* Ignore performance counts if notifications are blocked by the device
* Change the endpoint to allow more information
* Add tests and API description
* Remove wrong test
* Address feedback
* Only update the cache when there is no error
* Follow same casing as other props
* use one single endpoint
* Fix tests
* Fix i18n
---------
Co-authored-by: Mattermost Build <build@mattermost.com>
* Marks the RemoteTeamId field of RemoteClusters as deprecated
The `RemoteTeamId` was used both in the `RemoteCluster` model and as
part of remote invites. It existed so two different remotes could have
multiple secure connections between them, and have each of those
connections scoped to a team, sharing through each only the channels
that belong to their corresponding team.
The way that we're thinking on the feature currently only contemplates
one secure connection between two servers, and shares all the
channels through that secure connection, so this field is no longer
needed.
As we don't have a system in place for the user to choose in which
team a channel should be created from an invite, this change adds a
mechanism that checks the invite for a teamId, and if it's not
present, fetches a team from the database to create the channel
into. This makes the change backwards compatible for secure
connections that already have an established behavior and allows us to
move forward with the implementation of an alternative.
* Mark invite teamId field as deprecated
---------
Co-authored-by: Mattermost Build <build@mattermost.com>
* add ratelimit to /sessions; cap userAgent version length; tests
* add MaxSessionsLimit; remove oldest session first; tests
* can't use slices in 1.20; improve test
* nits
* add GetLRUSessions; move limiting to CreateSession; remove rate limiting
* use queryBuilder
* mysql needs a limit when using offset
* update i18n
* refactor into limitNumberOfSessions; protect createSessionForUserAccessToken
* add comment to GetLRUSessions
* add limit to oauth path; PR comments
It was a good decision in hindsight to keep the public module as 0.x
because this would have been a breaking change again.
https://mattermost.atlassian.net/browse/MM-53032
```release-note
Changed the Go module path from github.com/mattermost/mattermost-server/server/v8 to github.com/mattermost/mattermost/server/v8.
For the public facing module, it's path is also changed from github.com/mattermost/mattermost-server/server/public to github.com/mattermost/mattermost/server/public
```
https://mattermost.atlassian.net/browse/MM-52079
```release-note
We upgrade the module version to 8.0. The new module path is github.com/mattermost-server/server/v8.
```
Co-authored-by: Doug Lauder <wiggin77@warpmail.net>
