Some rare commands in the worker require to keep their input open and
terminate when it's closed ("show events -w", "wait"). Others maintain
a per-session context ("set anon on"). But in its default operation
mode, the master CLI passes commands one at a time to the worker, and
closes the CLI's input channel so that the command can immediately
close upon response. This effectively prevents these two specific cases
from being used.
Here the approach that we take is to introduce a bidirectional mode to
connect to the worker, where everything sent to the master is immediately
forwarded to the worker (including the raw command), allowing to queue
multiple commands at once in the same session, and to continue to watch
the input to detect when the client closes. It must be a client's choice
however, since doing so means that the client cannot batch many commands
at once to the master process, but must wait for these commands to complete
before sending new ones. For this reason we use the prefix "@@<pid>" for
this. It works exactly like "@" except that it maintains the channel
open during the whole execution. Similarly to "@<pid>" with no command,
"@@<pid>" will simply open an interactive CLI session to the worker, that
will be ended by "quit" or by closing the connection. This can be convenient
for the user, and possibly for clients willing to dedicate a connection to
the worker.
The '@' prefix permits to execute a single command at once in a worker.
It is very handy but comes with some limitations affecting rare commands,
which is better to be documented (one command per session, input closed)
since it can seldom have user-visible effects.
While the examples were clear, the text did not fully imply what was
reflected there. Better have the text explicitly mention that the
'@' command may be used as a prefix or wrapper in front of a command
as well as a standalone command.
Released version 3.2-dev10 with the following main changes :
- REORG: ssl: move curves2nid and nid2nist to ssl_utils
- BUG/MEDIUM: stream: Fix a possible freeze during a forced shut on a stream
- MEDIUM: stream: Save SC and channel flags earlier in process_steam()
- BUG/MINOR: peers: fix expire learned from a peer not converted from ms to ticks
- BUG/MEDIUM: peers: prevent learning expiration too far in futur from unsync node
- CI: spell check: allow manual trigger
- CI: codespell: add "pres" to spellcheck whitelist
- CLEANUP: assorted typo fixes in the code, commits and doc
- CLEANUP: atomics: remove support for gcc < 4.7
- CLEANUP: atomics: also replace __sync_synchronize() with __atomic_thread_fence()
- TESTS: Fix build for filltab25.c
- MEDIUM: ssl: replace "crt" lines by "ssl-f-use" lines
- DOC: configuration: replace "crt" by "ssl-f-use" in listeners
- MINOR: backend: mark srv as nonnull in alloc_dst_address()
- BUG/MINOR: server: ensure check-reuse-pool is copied from default-server
- MINOR: server: activate automatically check reuse for rhttp@ protocol
- MINOR: check/backend: support conn reuse with SNI
- MINOR: check: implement check-pool-conn-name srv keyword
- MINOR: task: add thread safe notification_new and notification_wake variants
- BUG/MINOR: hlua_fcn: fix potential UAF with Queue:pop_wait()
- MINOR: hlua_fcn: register queue class using hlua_register_metatable()
- MINOR: hlua: add core.wait()
- MINOR: hlua: core.wait() takes optional delay paramater
- MINOR: hlua: split hlua_applet_tcp_recv_yield() in two functions
- MINOR: hlua: add AppletTCP:try_receive()
- MINOR: hlua_fcn: add Queue:alarm()
- MEDIUM: task: make notification_* API thread safe by default
- CLEANUP: log: adjust _lf_cbor_encode_byte() comment
- MEDIUM: ssl/crt-list: warn on negative wildcard filters
- MEDIUM: ssl/crt-list: warn on negative filters only
- BUILD: atomics: fix build issue on non-x86/non-arm systems
- BUG/MINOR: log: fix CBOR encoding with LOG_VARTEXT_START() + lf_encode_chunk()
- BUG/MEDIUM: sample: fix risk of overflow when replacing multiple regex back-refs
- DOC: configuration: rework the crt-list section
- MINOR: ring: support arbitrary delimiters through ring_dispatch_messages()
- MINOR: ring/cli: support delimiting events with a trailing \0 on "show events"
- DEV: h2: fix h2-tracer.lua nil value index
- BUG/MINOR: backend: do not use the source port when hashing clientip
- BUG/MINOR: hlua: fix invalid errmsg use in hlua_init()
- MINOR: proxy: add setup_new_proxy() function
- MINOR: checks: mark CHECKS-FE dummy frontend as internal
- MINOR: flt_spoe: mark spoe agent frontend as internal
- MEDIUM: tree-wide: avoid manually initializing proxies
- MINOR: proxy: add deinit_proxy() helper func
- MINOR: checks: deinit checks_fe upon deinit
- MINOR: flt_spoe: deinit spoe agent proxy upon agent release
At the moment it is not supported to produce multi-line events on the
"show events" output, simply because the LF character is used as the
default end-of-event mark. However it could be convenient to produce
well-formatted multi-line events, e.g. in JSON or other formats. UNIX
utilities have already faced similar needs in the past and added
"-print0" to "find" and "-0" to "xargs" to mention that the delimiter
is the NUL character. This makes perfect sense since it's never present
in contents, so let's do exactly the same here.
Thus from now on, "show events <ring> -0" will delimit messages using
a \0 instead of a \n, permitting a better and safer encapsulation.
Queue:alarm() sets a wakeup alarm on the task when new data becomes
available on Queue. It must be re-armed for each event.
Lua documentation was updated
This is the non-blocking variant for AppletTCP:receive(). It doesn't
take any argument, instead it tries to read as much data as available
at once. If no data is available, empty string is returned.
Lua documentation was updated.
core.wait() now accepts optional delay parameter in ms. Passed this delay
the task is woken up if no event woke the task before.
Lua documentation was updated.
Similar to core.yield(), except that the task is not woken up
automatically, instead it waits for events to trigger the task
wakeup.
Lua documentation was updated.
This commit is a direct follow-up of the previous one. It defines a new
server keyword check-pool-conn-name. It is used as the default value for
the name parameter of idle connection hash generation.
Its behavior is similar to server keyword pool-conn-name, but reserved
for checks reuse. If check-pool-conn-name is set, it is used in priority
to match a connection for reuse. If unset, a fallback is performed on
check-sni.
Without check-reuse-pool, it is impossible to perform check on server
using @rhttp protocol. This is due to the inherent nature of the
protocol which does not implement an active connect method.
Thus, ensure that check-reuse-pool is always set when a reverse HTTP
server is declared. This reduces server configuration and should prevent
any omission. Note that it is still require to add "check" server
keyword so activate server checks.
Replace the "crt" keyword from the frontend section with a "ssl-f-use"
keyword, "crt" could be ambigous in case we don't want to put a
certificate filename.
Released version 3.2-dev9 with the following main changes :
- MINOR: quic: move global tune options into quic_tune
- CLEANUP: quic: reorganize TP flow-control initialization
- MINOR: quic: ignore uni-stream for initial max data TP
- MINOR: mux-quic: define config for max-data
- MINOR: quic: define max-stream-data configuration as a ratio
- MEDIUM: lb-chash: add directive hash-preserve-affinity
- MEDIUM: pools: be a bit smarter when merging comparable size pools
- REGTESTS: disable the test balance/balance-hash-maxqueue
- BUG/MINOR: log: fix gcc warn about truncating NUL terminator while init char arrays
- CI: fedora rawhide: allow "on: workflow_dispatch" in forks
- CI: fedora rawhide: install "awk" as a dependency
- CI: spellcheck: allow "on: workflow_dispatch" in forks
- CI: coverity scan: allow "on: workflow_dispatch" in forks
- CI: cross compile: allow "on: workflow_dispatch" in forks
- CI: Illumos: allow "on: workflow_dispatch" in forks
- CI: NetBSD: allow "on: workflow_dispatch" in forks
- CI: QUIC Interop on AWS-LC: allow "on: workflow_dispatch" in forks
- CI: QUIC Interop on LibreSSL: allow "on: workflow_dispatch" in forks
- MINOR: compiler: add __nonstring macro
- MINOR: thread: dump the CPU topology in thread_map_to_groups()
- MINOR: cpu-set: compare two cpu sets with ha_cpuset_isequal()
- MINOR: cpu-set: add a new function to print cpu-sets in human-friendly mode
- MINOR: cpu-topo: add a dump of thread-to-CPU mapping to -dc
- MINOR: cpu-topo: pass an extra argument to ha_cpu_policy
- MINOR: cpu-topo: add new cpu-policies "group-by-2-clusters" and above
- BUG/MINOR: config: silence .notice/.warning/.alert in discovery mode
- EXAMPLES: add "games.cfg" and an example game in Lua
- MINOR: jws: emit the JWK thumbprint
- TESTS: jws: change the jwk format
- MINOR: ssl/ckch: add substring parser for ckch_conf
- MINOR: mt_list: Implement mt_list_try_lock_prev().
- MINOR: lbprm: Add method to deinit server and proxy
- MINOR: threads: Add HA_RWLOCK_TRYRDTOWR()
- MAJOR: leastconn; Revamp the way servers are ordered.
- BUG/MINOR: ssl/ckch: leak in error path
- BUILD: ssl/ckch: potential null pointer dereference
- MINOR: log: support "raw" logformat node typecast
- CLEANUP: assorted typo fixes in the code and comments
- DOC: config: fix two missing "content" in "tcp-request" examples
- MINOR: cpu-topo: cpu_dump_topology() SMT info check little optimisation
- BUILD: compiler: undefine the CONCAT() macro if already defined
- BUG/MEDIUM: leastconn: Don't try to reposition if the server is down
- BUG/MINOR: rhttp: fix incorrect dst/dst_port values
- BUG/MINOR: backend: do not overwrite srv dst address on reuse
- BUG/MEDIUM: backend: fix reuse with set-dst/set-dst-port
- MINOR: sample: define bc_reused fetch
- REGTESTS: extend conn reuse test with transparent proxy
- MINOR: backend: fix comment when killing idle conns
- MINOR: backend: adjust conn_backend_get() API
- MINOR: backend: extract conn hash calculation from connect_server()
- MINOR: backend: extract conn reuse from connect_server()
- MINOR: backend: remove stream usage on connection reuse
- MINOR: check define check-reuse-pool server keyword
- MEDIUM: check: implement check-reuse-pool
- BUILD: backend: silence a build warning when not using ssl
- BUILD: quic_sock: address a strict-aliasing build warning with gcc 5 and 6
- BUILD: ssl_ckch: use my_strndup() instead of strndup()
- DOC: update INSTALL to reflect the minimum compiler version
Define a new server keyword check-reuse-pool, and its counterpart with a
"no" prefix. For the moment, only parsing is implemented. The real
behavior adjustment will be implemented in the next patch.
As reported by Uku Srmus in GitHub issue #2917, two "tcp-request" rules
in an example were mistakenly missing the "content" hook, rendering them
invalid.
This can be backported.
Implement mt_list_try_lock_prev(), that does the same thing
as mt_list_lock_prev(), exceot if the list is locked, it
returns { NULL, NULL } instaed of waiting.
This adds "group-by-{2,3,4}-clusters", which, as its name implies,
create one thread group per X clusters. This can be useful when CPUs
are split into too small clusters, as well as when the total number
of assigned cores is not even between the clusters, to try to spread
the load between less different ones.
When using hash-based load balancing, requests are always assigned to
the server corresponding to the hash bucket for the balancing key,
without taking maxconn or maxqueue into account, unlike in other load
balancing methods like 'first'. This adds a new backend directive that
can be used to take maxconn and possibly maxqueue in that context. This
can be used when hashing is desired to achieve cache locality, but
sending requests to a different server is preferable to queuing for a
long time or failing requests when the initial server is saturated.
By default, affinity is preserved as was the case previously. When
'hash-preserve-affinity' is set to 'maxqueue', servers are considered
successively in the order of the hash ring until a server that does not
have a full queue is found.
When 'maxconn' is set on a server, queueing cannot be disabled, as
'maxqueue=0' means unlimited. To support picking a different server
when a server is at 'maxconn' irrespective of the queue,
'hash-preserve-affinity' can be set to 'maxconn'.
Define a new global configuration tune.quic.frontend.max-data. This
allows users to explicitely set the value for the corresponding QUIC TP
initial-max-data, with direct impact on haproxy memory consumption.
Released version 3.2-dev8 with the following main changes :
- MINOR: jws: implement JWS signing
- TESTS: jws: implement a test for JWS signing
- CI: github: add "jose" to apt dependencies
- CLEANUP: log-forward: remove useless options2 init
- CLEANUP: log: add syslog_process_message() helper
- MINOR: proxy: add proxy->options3
- MINOR: log: migrate log-forward options from proxy->options2 to options3
- MINOR: log: provide source address information in syslog_process_message()
- MINOR: tools: only print address in sa2str() when port == -1
- MINOR: log: add "option host" log-forward option
- MINOR: log: handle log-forward "option host"
- MEDIUM: log: change default "host" strategy for log-forward section
- BUG/MEDIUM: thread: use pthread_self() not ha_pthread[tid] in set_affinity
- MINOR: compiler: add a simple macro to concatenate resolved strings
- MINOR: compiler: add a new __decl_thread_var() macro to declare local variables
- BUILD: tools: silence a build warning when USE_THREAD=0
- BUILD: backend: silence a build warning when threads are disabled
- DOC: management: rename some last occurences from domain "dns" to "resolvers"
- BUG/MINOR: stats: fix capabilities and hide settings for some generic metrics
- MINOR: cli: export cli_io_handler() to ease symbol resolution
- MINOR: tools: improve symbol resolution without dl_addr
- MINOR: tools: ease the declaration of known symbols in resolve_sym_name()
- MINOR: tools: teach resolve_sym_name() a few more common symbols
- BUILD: tools: avoid a build warning on gcc-4.8 in resolve_sym_name()
- DEV: ncpu: also emulate sysconf() for _SC_NPROCESSORS_*
- DOC: design-thoughts: commit numa-auto.txt
- MINOR: cpuset: make the API support negative CPU IDs
- MINOR: thread: rely on the cpuset functions to count bound CPUs
- MINOR: cpu-topo: add ha_cpu_topo definition
- MINOR: cpu-topo: allocate and initialize the ha_cpu_topo array.
- MINOR: cpu-topo: rely on _SC_NPROCESSORS_CONF to trim maxcpus
- MINOR: cpu-topo: add a function to dump CPU topology
- MINOR: cpu-topo: update CPU topology from excluded CPUs at boot
- REORG: cpu-topo: move bound cpu detection from cpuset to cpu-topo
- MINOR: cpu-topo: add detection of online CPUs on Linux
- MINOR: cpu-topo: add detection of online CPUs on FreeBSD
- MINOR: cpu-topo: try to detect offline cpus at boot
- MINOR: cpu-topo: add CPU topology detection for linux
- MINOR: cpu-topo: also store the sibling ID with SMT
- MINOR: cpu-topo: add NUMA node identification to CPUs on Linux
- MINOR: cpu-topo: add NUMA node identification to CPUs on FreeBSD
- MINOR: thread: turn thread_cpu_mask_forced() into an init-time variable
- MINOR: cfgparse: move the binding detection into numa_detect_topology()
- MINOR: cfgparse: use already known offline CPU information
- MINOR: global: add a command-line option to enable CPU binding debugging
- MINOR: cpu-topo: add a new "cpu-set" global directive to choose cpus
- MINOR: cpu-topo: add "drop-cpu" and "only-cpu" to cpu-set
- MEDIUM: thread: start to detect thread groups and threads min/max
- MEDIUM: cpu-topo: make sure to properly assign CPUs to threads as a fallback
- MEDIUM: thread: reimplement first numa node detection
- MEDIUM: cfgparse: remove now unused numa & thread-count detection
- MINOR: cpu-topo: refine cpu dump output to better show kept/dropped CPUs
- MINOR: cpu-topo: fall back to nominal_perf and scaling_max_freq for the capacity
- MINOR: cpu-topo: use cpufreq before acpi cppc
- MINOR: cpu-topo: boost the capacity of performance cores with cpufreq
- MINOR: cpu-topo: skip CPU detection when /sys/.../cpu does not exist
- MINOR: cpu-topo: skip identification of non-existing CPUs
- MINOR: cpu-topo: skip CPU properties that we've verified do not exist
- MINOR: cpu-topo: implement a sorting mechanism for CPU index
- MINOR: cpu-topo: implement a sorting mechanism by CPU locality
- MINOR: cpu-topo: implement a CPU sorting mechanism by cluster ID
- MINOR: cpu-topo: ignore single-core clusters
- MINOR: cpu-topo: assign clusters to cores without and renumber them
- MINOR: cpu-topo: make sure we don't leave unassigned IDs in the cpu_topo
- MINOR: cpu-topo: assign an L3 cache if more than 2 L2 instances
- MINOR: cpu-topo: renumber cores to avoid holes and make them contiguous
- MINOR: cpu-topo: add a function to sort by cluster+capacity
- MINOR: cpu-topo: consider capacity when forming clusters
- MINOR: cpu-topo: create an array of the clusters
- MINOR: cpu-topo: ignore excess of too small clusters
- MINOR: cpu-topo: add "only-node" and "drop-node" to cpu-set
- MINOR: cpu-topo: add "only-thread" and "drop-thread" to cpu-set
- MINOR: cpu-topo: add "only-core" and "drop-core" to cpu-set
- MINOR: cpu-topo: add "only-cluster" and "drop-cluster" to cpu-set
- MINOR: cpu-topo: add a CPU policy setting to the global section
- MINOR: cpu-topo: add a 'first-usable-node' cpu policy
- MEDIUM: cpu-topo: use the "first-usable-node" cpu-policy by default
- CLEANUP: thread: now remove the temporary CPU node binding code
- MINOR: cpu-topo: add cpu-policy "group-by-cluster"
- MEDIUM: cpu-topo: let the "group-by-cluster" split groups
- MINOR: cpu-topo: add a new "performance" cpu-policy
- MINOR: cpu-topo: add a new "efficiency" cpu-policy
- MINOR: cpu-topo: add a new "resource" cpu-policy
- MINOR: jws: add new functions in jws.h
- MINOR: cpu-topo: fix unused stack var 'cpu2' reported by coverity
- MINOR: hlua: add an optional timeout to AppletTCP:receive()
- MINOR: jws: use jwt_alg type instead of a char
- BUG/MINOR: log: prevent saddr NULL deref in syslog_io_handler()
- MINOR: stream: decrement srv->served after detaching from the list
- BUG/MINOR: hlua: fix optional timeout argument index for AppletTCP:receive()
- MINOR: server: simplify srv_has_streams()
- CLEANUP: server: make it clear that srv_check_for_deletion() is thread-safe
- MINOR: cli/server: don't take thread isolation to check for srv-removable
- BUG/MINOR: limits: compute_ideal_maxconn: don't cap remain if fd_hard_limit=0
- MINOR: limits: fix check_if_maxsock_permitted description
- BUG/MEDIUM: hlua/cli: fix cli applet UAF in hlua_applet_wakeup()
- MINOR: tools: path_base() concatenates a path with a base path
- MEDIUM: ssl/ckch: make the ckch_conf more generic
- BUG/MINOR: mux-h2: Reset streams with NO_ERROR code if full response was already sent
- MINOR: stats: add .generic explicit field in stat_col struct
- MINOR: stats: STATS_PX_CAP___B_ macro
- MINOR: stats: add .cap for some static metrics
- MINOR: stats: use stat_col storage stat_cols_info
- MEDIUM: promex: switch to using stat_cols_info for global metrics
- MINOR: promex: expose ST_I_INF_WARNINGS (AKA total_warnings) metric
- MEDIUM: promex: switch to using stat_cols_px for front/back/server metrics
- MINOR: stats: explicitly add frontend cap for ST_I_PX_REQ_TOT
- CLEANUP: promex: remove unused PROMEX_FL_{INFO,FRONT,BACK,LI,SRV} flags
- BUG/MEDIUM: mux-quic: fix crash on RS/SS emission if already close local
- BUG/MINOR: mux-quic: remove extra BUG_ON() in _qcc_send_stream()
- MEDIUM: mt_list: Reduce the max number of loops with exponential backoff
- MINOR: stats: add alt_name field to stat_col struct
- MINOR: stats: add alt name info to stat_cols_info where relevant
- MINOR: promex: get rid of promex_global_metric array
- MINOR: stats-proxy: add alt_name field for ME_NEW_{FE,BE,PX} helpers
- MINOR: stats-proxy: add alt name info to stat_cols_px where relevant
- MINOR: promex: get rid of promex_st_metrics array
- MINOR: pools: rename the "by_what" field of the show pools context to "how"
- MINOR: cli/pools: record the list of pool registrations even when merging them
By default, create_pool() tries to merge similar pools into one. But when
dealing with certain bugs, it's hard to say which ones were merged together.
We do have the information at registration time, so let's just create a
list of registrations ("pool_registration") attached to each pool, that
will store that information. It can then be consulted on the CLI using
"show pools detailed", where the names, sizes, alignment and flags are
reported.
TCP services might want to be interactive, and without a timeout on
receive(), the possibilities are a bit limited. Let's add an optional
timeout in the 3rd argument to possibly limit the wait time. In this
case if the timeout strikes before the requested size is complete,
a possibly incomplete block will be returned.
This cpu policy keeps the smallest CPU cluster. This can
be used to limit the resource usage to the strict minimum
that still delivers decent performance, for example to
try to further reduce power consumption or minimize the
number of cores needed on some rented systems for a
sidecar setup, in order to scale the system down more
easily. Note that if a single cluster is present, it
will still be fully used.
When started on a 64-core EPYC gen3, it uses only one CCX
with 8 cores and 16 threads, all in the same group.
This cpu policy tries to evict performant core clusters and only
focuses on efficiency-oriented ones. On an intel i9-14900k, we can
get 525k rps using 8 performance cores, versus 405k when using all
24 efficiency cores. In some cases the power savings might be more
desirable (e.g. scalability tests on a developer's laptop), or the
performance cores might be better suited for another component
(application or security component).
This cpu policy tries to evict efficient core clusters and only
focuses on performance-oriented ones. On an intel i9-14900k, we can
get 525k rps using only 8 cores this way, versus 594k when using all
24 cores. The gains from using all these codes are not significant
enough to waste them on this. Also these cores can be much slower
at doing SSL handshakes so it can make sense to evict them. Better
keep the efficiency cores for network interrupts for example.
Also, on a developer's machine it can be convenient to keep all these
cores for the local tasks and extra tools (load generators etc).
This policy forms thread groups from the CPU clusters, and bind all the
threads in them to all the CPUs of the cluster. This is recommended on
system with bad inter-CCX latencies. It was shown to simply triple the
performance with queuing on a 64-core EPYC without having to manually
assign the cores with cpu-map.
This now turns the cpu-policy to "first-usable-node" by default, so that
we preserve the current default behavior consisting in binding to the
first node if nothing was forced. If a second node is found,
global.nbthread is set and the previous code will be skipped.
This is a reimplemlentation of the current default policy. It binds to
the first node having usable CPUs if found, and drops CPUs from the
second and next nodes.
These are processed after the topology is detected, and they allow to
restrict binding to or evict CPUs matching the indicated hardware
cluster number(s). It can be used to bind to only some clusters, such
as CCX or different energy efficiency cores. For this reason, here we
use the cluster's local ID (local to the node).
These are processed after the topology is detected, and they allow to
restrict binding to or evict CPUs matching the indicated hardware
core number(s). It can be used to bind to only some clusters as well
as to evict efficient cores whose number is known.
These are processed after the topology is detected, and they allow to
restrict binding to or evict CPUs matching the indicated hardware
thread number(s). It can be used to reserve even threads for HW IRQs
and odd threads for haproxy for example, or to evict efficient cores
that do only have thread #0.
For now it's limited, it only supports "reset" to ask that any previous
"taskset" be ignored. The goal will be to later add more actions that
allow to symbolically define sets of cpus to bind to or to drop. This
also clears the cpu_mask_forced variable that is used to detect
that a taskset had been used.
During development, everything related to CPU binding and the CPU topology
is debugged using state dumps at various places, but it does make sense to
have a real command line option so that this remains usable in production
to help users figure why some CPUs are not used by default. Let's add
"-dc" for this. Since the list of global.tune.options values is almost
full and does not 100% match this option, let's add a new "tune.debug"
field for this.
Lots of collected data and observations aggregated into a single commit
so as not to lose them. Some parts below come from several commit
messages and are incremental.
Add captures and analysis of intel 14900 where it's not easy to draw
the line between the desired P and E cores.
The 14900 raises some questions (imagine a dual-die variant in multi-socket).
That's the start of an algorithmic distribution of performance cores into
thread groups.
cpu-map currently conflicts a lot with the choices after auto-detection
but it doesn't have to. The problem is the inability to configure the
threads for the whole process like taskset does. By offering this ability
we can also start to designate groups of CPUs symbolically (package, die,
ccx, cores, smt).
It can also be useful to exploit the info from cpuinfo that is not
available in /sys, such as the model number. At least on arm, higher
numbers indicate bigger cores and can be useful to distinguish cores
inside a cluster. It will not indicate big vs medium ones of the same
type (e.g. a78 3.0 vs 2.4 GHz) but can still be effective at identifying
the efficient ones.
In short, infos such as cluster ID not always reliable, and are
local to the package. die_id as well. die number is not reported
here but should definitely be used, as a higher priority than L3.
We're still missing a discriminant between the l3 and cluster number
in order to address heterogenous CPUs (e.g. intel 14900), though in
terms of locality that's currently done correctly.
CPU selection is also a full topic, and some thoughts were noted
regarding sorting by perf vs locality so as never to mix inter-
socket CPUs due to sorting.
The proposed cpu-selection cannot work as-is, because it acts both on
restriction and preference, and these two are not actions but a sequence.
First restrictions must be enforced, and second the remaining CPUs are
sorted according to the preferred criterion, and a number of threads are
selected.
Currently we refine the OS-exposed cluster number but it's not correct
as we can end up with something poorly numbered. We need to respect the
LLC in any case so let's explain the approach.
This is a complementary patch to cf913c2f9 ("DOC: management: rename show
stats domain cli "dns" to "resolvers"). The doc still refered to the
legacy "dns" domain filter for stat command. Let's rename those occurences
to "resolvers".
It may be backported to all stable versions.
Historically, log-forward proxy used to preserve host field from input
message as much as possible, and if syslog host wasn't provided
(rfc5424 '-' or bad rfc3164 or rfc5424 message) then "localhost" or "-"
would be used as host when outputting message using rfc3164 or rfc5424.
We change that behavior (which corresponds to "keep" host option), so that
log-forward now uses "fill" strategy as default: if the host is provided
in input message, it is preserved. However if it is missing and IP address
from sender is available, we use it.
Following previous patch, we know implement the logic for the host
option under log-forward section. Possible strategies are:
replace If input message already contains a value for the host
field, we replace it by the source IP address from the
sender.
If input message doesn't contain a value for the host field
(ie: '-' as input rfc5424 message or non compliant rfc3164
or rfc5424 message), we use the source IP address from the
sender as host field.
fill If input message already contains a value for the host field,
we keep it.
If input message doesn't contain a value for the host field
(ie: '-' as input rfc5424 message or non compliant rfc3164
or rfc5424 message), we use the source IP address from the
sender as host field.
keep If input message already contains a value for the host field,
we keep it.
If input message doesn't contain a value for the host field,
we set it to localhost (rfc3164) or '-' (rfc5424).
(This is the default)
append If input message already contains a value for the host field,
we append a comma followed by the IP address from the sender.
If input message doesn't contain a value for the host field,
we use the source IP address from the sender.
Default value (unchanged) is "keep" strategy. option host is only relevant
with rfc3164 or rfc5424 format on log targets. Also, if the source address
is not available (ie: UNIX socket), default behavior prevails.
Documentation was updated.
Released version 3.2-dev7 with the following main changes :
- BUG/MEDIUM: applet: Don't handle EOI/EOS/ERROR is applet is waiting for room
- BUG/MEDIUM: spoe/mux-spop: Introduce an NOOP action to deal with empty ACK
- BUG/MINOR: cfgparse: fix NULL ptr dereference in cfg_parse_peers
- BUG/MEDIUM: uxst: fix outgoing abns address family in connect()
- REGTESTS: fix reg-tests/server/abnsz.vtc
- BUG/MINOR: log: fix outgoing abns address family
- BUG/MINOR: sink: add tempo between 2 connection attempts for sft servers
- MINOR: clock: always use atomic ops for global_now_ms
- CI: QUIC Interop: clean old docker images
- BUG/MINOR: stream: do not call co_data() from __strm_dump_to_buffer()
- BUG/MINOR: mux-h1: always make sure h1s->sd exists in h1_dump_h1s_info()
- MINOR: tinfo: add a new thread flag to indicate a call from a sig handler
- BUG/MEDIUM: stream: never allocate connection addresses from signal handler
- MINOR: freq_ctr: provide non-blocking read functions
- BUG/MEDIUM: stream: use non-blocking freq_ctr calls from the stream dumper
- MINOR: tools: use only opportunistic symbols resolution
- CLEANUP: task: move the barrier after clearing th_ctx->current
- MINOR: compression: Introduce minimum size
- BUG/MINOR: h2: always trim leading and trailing LWS in header values
- MINOR: tinfo: split the signal handler report flags into 3
- BUG/MEDIUM: stream: don't use localtime in dumps from a signal handler
- OPTIM: connection: don't try to kill other threads' connection when !shared
- BUILD: add possibility to use different QuicTLS variants
- MEDIUM: fd: Wait if locked in fd_grab_tgid() and fd_take_tgid().
- MINOR: fd: Add fd_lock_tgid_cur().
- MEDIUM: epoll: Make sure we can add a new event
- MINOR: pollers: Add a fixup_tgid_takeover() method.
- MEDIUM: pollers: Drop fd events after a takeover to another tgid.
- MEDIUM: connections: Allow taking over connections from other tgroups.
- MEDIUM: servers: Add strict-maxconn.
- BUG/MEDIUM: server: properly initialize PROXY v2 TLVs
- BUG/MINOR: server: fix the "server-template" prefix memory leak
- BUG/MINOR: h3: do not report transfer as aborted on preemptive response
- CLEANUP: h3: fix documentation of h3_rcv_buf()
- MINOR: hq-interop: properly handle incomplete request
- BUG/MEDIUM: mux-fcgi: Try to fully fill demux buffer on receive if not empty
- MINOR: h1: permit to relax the websocket checks for missing mandatory headers
- BUG/MINOR: hq-interop: fix leak in case of rcv_buf early return
- BUG/MINOR: server: check for either proxy-protocol v1 or v2 to send hedaer
- MINOR: jws: implement a JWK public key converter
- DEBUG: init: add a way to register functions for unit tests
- TESTS: add a unit test runner in the Makefile
- TESTS: jws: register a unittest for jwk
- CI: github: run make unit-tests on the CI
- TESTS: add config smoke checks in the unit tests
- MINOR: jws: conversion to NIST curves name
- CI: github: remove smoke tests from vtest.yml
- TESTS: ist: fix wrong array size
- TESTS: ist: use the exit code to return a verdict
- TESTS: ist: add a ist.sh to launch in make unit-tests
- CI: github: fix h2spec.config proxy names
- DEBUG: init: Add a macro to register unit tests
- MINOR: sample: allow custom date format in error-log-format
- CLEANUP: log: removing "log-balance" references
- BUG/MINOR: log: set proper smp size for balance log-hash
- MINOR: log: use __send_log() with exact payload length
- MEDIUM: log: postpone the decision to send or not log with empty messages
- MINOR: proxy: make pr_mode enum bitfield compatible
- MINOR: cfgparse-listen: add and use cfg_parse_listen_match_option() helper
- MINOR: log: add options eval for log-forward
- MINOR: log: detach prepare from parse message
- MINOR: log: add dont-parse-log and assume-rfc6587-ntf options
- BUG/MEIDUM: startup: return to initial cwd only after check_config_validity()
- TESTS: change the output of run-unittests.sh
- TESTS: unit-tests: store sh -x in a result file
- CI: github: show results of the Unit tests
- BUG/MINOR: cfgparse/peers: fix inconsistent check for missing peer server
- BUG/MINOR: cfgparse/peers: properly handle ignored local peer case
- BUG/MINOR: server: dont return immediately from parse_server() when skipping checks
- MINOR: cfgparse/peers: provide more info when ignoring invalid "peer" or "server" lines
- BUG/MINOR: stream: fix age calculation in "show sess" output
- MINOR: stream/cli: rework "show sess" to better consider optional arguments
- MINOR: stream/cli: make "show sess" support filtering on front/back/server
- TESTS: quic: create first quic unittest
- MINOR: h3/hq-interop: restore function for standalone FIN receive
- MINOR/OPTIM: mux-quic: do not allocate rxbuf on standalone FIN
- MINOR: mux-quic: refine reception of standalone STREAM FIN
- MINOR: mux-quic: define globally stream rxbuf size
- MINOR: mux-quic: define rxbuf wrapper
- MINOR: mux-quic: store QCS Rx buf in a single-entry tree
- MINOR: mux-quic: adjust Rx data consumption API
- MINOR: mux-quic: adapt return value of qcc_decode_qcs()
- MAJOR: mux-quic: support multiple QCS RX buffers
- MEDIUM: mux-quic: handle too short data splitted on multiple rxbuf
- MAJOR: mux-quic: increase stream flow-control for multi-buffer alloc
- BUG/MINOR: cfgparse-tcp: relax namespace bind check
- MINOR: startup: adjust alert messages, when capabilities are missed
With "show sess", particularly "show sess all", we're often missing the
ability to inspect only streams attached to a frontend, backend or server.
Let's just add these filters to the command. Only one at a time may be set.
One typical use case could be to dump streams attached to a server after
issuing "shutdown sessions server XXX" to figure why any wouldn't stop
for example.
The "show sess" CLI command parser is getting really annoying because
several options were added in an exclusive mode as the single possible
argument. Recently some cumulable options were added ("show-uri") but
the older ones were not yet adapted. Let's just make sure that the
various filters such as "older" and "age" now belong to the options
and leave only <id>, "all", and "help" for the first ones. The doc was
updated and it's now easier to find these options.
This commit introduces the dont-parse-log option to disable log message
parsing, allowing raw log data to be forwarded without modification.
Also, it adds the assume-rfc6587-ntf option to frame log messages
using only non-transparent framing as per RFC 6587. This avoids
missparsing in certain cases (mainly with non RFC compliant messages).
The documentation is updated to include details on the new options and
their intended use cases.
This feature was discussed in GH #2856
At least one user would like to allow a standards-violating client setup
WebSocket connections through haproxy to a standards-violating server that
accepts them. While this should of course never be done over the internet,
it can make sense in the datacenter between application components which do
not need to mask the data, so this typically falls into the situation of
what the "accept-unsafe-violations-in-http-request" option and the
"accept-unsafe-violations-in-http-response" option are made for.
See GH #2876 for more context.
This patch relaxes the test on the "Sec-Websocket-Key" header field in
the request, and of the "Sec-Websocket-Accept" header in the response
when these respective options are set.
The doc was updated to reference this addition. This may be backported
to 3.1 but preferably not further.
Maxconn is a bit of a misnomer when it comes to servers, as it doesn't
control the maximum number of connections we establish to a server, but
the maximum number of simultaneous requests. So add "strict-maxconn",
that will make it so we will never establish more connections than
maxconn.
It extends the meaning of the "restricted" setting of
tune.takeover-other-tg-connections, as it will also attempt to get idle
connections from other thread groups if strict-maxconn is set.
Allow haproxy to take over idle connections from other thread groups
than our own. To control that, add a new tunable,
tune.takeover-other-tg-connections. It can have 3 values, "none", where
we won't attempt to get connections from the other thread group (the
default), "restricted", where we only will try to get idle connections
from other thread groups when we're using reverse HTTP, and "full",
where we always try to get connections from other thread groups.
Unless there is a special need, it is advised to use "none" (or
restricted if we're using reverse HTTP) as using connections from other
thread groups may have a performance impact.
This is the introduction of "minsize-req" and "minsize-res".
These two options allow you to set the minimum payload size required for
compression to be applied.
This helps save CPU on both server and client sides when the payload does
not need to be compressed.
Released version 3.2-dev6 with the following main changes :
- BUG/MEDIUM: debug: close a possible race between thread dump and panic()
- DEBUG: thread: report the spin lock counters as seek locks
- DEBUG: thread: make lock time computation more consistent
- DEBUG: thread: report the wait time buckets for lock classes
- DEBUG: thread: don't keep the redundant _locked counter
- DEBUG: thread: make lock_stat per operation instead of for all operations
- DEBUG: thread: reduce the struct lock_stat to store only 30 buckets
- MINOR: lbprm: add a new callback ->server_requeue to the lbprm
- MEDIUM: server: allocate a tasklet for asyncronous requeuing
- MAJOR: leastconn: postpone the server's repositioning under contention
- BUG/MINOR: quic: reserve length field for long header encoding
- BUG/MINOR: quic: fix CRYPTO payload size calcul for encoding
- MINOR: quic: simplify length calculation for STREAM/CRYPTO frames
- BUG/MINOR: mworker: section ignored in discovery after a post_section_parser
- BUG/MINOR: mworker: post_section_parser for the last section in discovery
- CLEANUP: mworker: "program" section does not have a post_section_parser anymore
- MEDIUM: initcall: allow to register mutiple post_section_parser per section
- CI: cirrus-ci: bump FreeBSD image to 14-2
- DOC: initcall: name correctly REGISTER_CONFIG_POST_SECTION()
- REGTESTS: stop using truncated.vtc on freebsd
- MINOR: quic: refactor STREAM encoding and splitting
- MINOR: quic: refactor CRYPTO encoding and splitting
- BUG/MEDIUM: fd: mark FD transferred to another process as FD_CLONED
- BUG/MINOR: ssl/cli: "show ssl crt-list" lacks client-sigals
- BUG/MINOR: ssl/cli: "show ssl crt-list" lacks sigals
- MINOR: ssl/cli: display more filenames in 'show ssl cert'
- DOC: watchdog: document the sequence of the watchdog and panic
- MINOR: ssl: store the filenames resulting from a lookup in ckch_conf
- MINOR: startup: allow hap_register_feature() to enable a feature in the list
- MINOR: quic: support frame type as a varint
- BUG/MINOR: startup: leave at first post_section_parser which fails
- BUG/MINOR: startup: hap_register_feature() fix for partial feature name
- BUG/MEDIUM: cli: Be sure to drop all input data in END state
- BUG/MINOR: cli: Wait for the last ACK when FDs are xferred from the old worker
- BUG/MEDIUM: filters: Handle filters registered on data with no payload callback
- BUG/MINOR: fcgi: Don't set the status to 302 if it is already set
- MINOR: ssl/crtlist: split the ckch_conf loading from the crtlist line parsing
- MINOR: ssl/crtlist: handle crt_path == cc->crt in crtlist_load_crt()
- MINOR: ssl/ckch: return from ckch_conf_clean() when conf is NULL
- MEDIUM: ssl/crtlist: "crt" keyword in frontend
- DOC: configuration: document the "crt" frontend keyword
- DEV: h2: add a Lua-based HTTP/2 connection tracer
- BUG/MINOR: quic: prevent crash on conn access after MUX init failure
- BUG/MINOR: mux-quic: prevent crash after MUX init failure
- DEV: h2: fix flags for the continuation frame
- REGTESTS: Fix truncated.vtc to send 0-CRLF
- BUG/MINOR: mux-h2: Properly handle full or truncated HTX messages on shut
- Revert "REGTESTS: stop using truncated.vtc on freebsd"
- MINOR: mux-quic: define a QCC application state member
- MINOR: mux-quic/h3: emit SETTINGS via MUX tasklet handler
- MINOR: mux-quic/h3: support temporary blocking on control stream sending
Each time we go into the watchdog and panic code, it's super hard to
figure who calls what since signals are involved to bounce between
threads. Let's document the main principles and sequences to ease the
journey next time.
Before this patch, REGISTER_CONFIG_SECTION() allowed to register one and only
one callback (<post>) called after the parsing of a section.
It was limitating because you couldn't register a post callback from anywhere
else in the code.
This patch introduces the new REGISTER_CONFIG_SECTION_POST() macros which allows
to register a new post callback for a section keyword from anywhere.
This patch introduces the feature by allowing `struct cfg_section` entries that
does not have a `section_parser`, and then iterating on all cfg_section with a
post_section_parser for a keyword.
Released version 3.2-dev5 with the following main changes :
- BUG/MINOR: ssl: put ssl_sock_load_ca under SSL_NO_GENERATE_CERTIFICATES
- CLEANUP: ssl: rename ssl_sock_load_ca to ssl_sock_gencert_load_ca
- CLEANUP: ssl: move ssl_sock_gencert_load_ca declaration in ssl_gencert.h
- CLEANUP: tree-wide: define and use acl_match_cond() helper
- MINOR: epoll: permit to mask certain specific events
- MINOR: proxies: Add a per-thread group field to struct proxy.
- MINOR: Add fields to the per-thread group field in struct server.
- MINOR: proxies/servers: Calculate queueslength and use it.
- MEDIUM: servers/proxies: Switch to using per-tgroup queues.
- BUG/MINOR: stream: Properly handle "on-marked-up shutdown-backup-sessions"
- MEDIUM: stream: Map task wake up reasons to dedicated stream events
- MEDIUM: stream: No longer use TASK_F_UEVT* to shut a stream down
- BUILD: tools: fix build on BSD by dropping the ETIME check
- MINOR: queues: use __ha_cpu_relax() on failed CAS.
- BUILD: queues: Use unsigned int when needed
- BUILD: ssl: allow to build without the renegotiation API of WolfSSL
- BUILD: ssl: more cleaner approach to WolfSSL without renegotiation
- BUG/MEDIUM: chunk: make sure to flush the trash pool before resizing
- MINOR: quic: remove references to burst in quic-cc-algo parsing
- MINOR: quic: allow BBR testing without pacing
- MINOR: quic: transform pacing settings into a global option
- MAJOR: quic: mark pacing as stable and enable it by default
- MINOR: quic: mark BBR as stable
- MINOR: quic: define quic_tune
- BUILD: quic: fix overflow in global tune
- DEBUG: fd: add a counter of takeovers of an FD since it was last opened
- MINOR: fd: add a generation number to file descriptors
- DEBUG: epoll: store and compare the FD's generation count with reported event
- MEDIUM: epoll: skip reports of stale file descriptors
- MINOR: mux-h1: Add masks to group H1S DEMUX and MUX errors
- BUG/MINOR: mux-h1: Only report a SE error on demux error
- MINOR: tevt: Add the termination events log's fundations
- MINOR: tevt/stconn: Add a termination events log in the SE descriptor
- MINOR: tevt/mux-h1: Report termination events for the H1C and H1S
- MINOR: tevt/mux-h2: Report termination events for the H2C
- MINOR: tevt/stream/stconn: Report termination events for stream and sc
- MINOR: tevt/conn: Report intercepted event for L4 rules
- MINOR: tevt/mux-h1/mux-h2: Add termination events log when dumping mux info
- MINOR: tevt/muxes: Add CTL and SCTL command to get the termination event logs
- MINOR: tevt/mux-pt: Add support for termination event logs
- MINOR: tevt/connection: Add dedicated termination events for lower locations
- MEDIUM: tevt/muxes: Add dedicated termination events for muxc/se locations
- MINOR: tevt/stconn: Be more accurate to report shutw events
- MEDIUM: tevt/stconn/stream: Add dedicated termination events for stream location
- MINOR: tevt: Don't duplicate termination event during reporting
- MINOR: tevt/applet: Add limited support for termination event logs for applets
- MINOR: tevt: Add a sample to get termination events for all locations
- MINOR: tevt: Improve function to convert a termination events log to string
- REORG: tevt/connection: Move enums at the end of the header file
- MINOR: tevt/dev: Add term_events tool
- MINOR: tevt/connection: Add support for POLL_HUP/POLL_ERR events
- MINOR: tevt/dev: Parse tuple of termination events
- BUG/MEDIUM: htx: wrong count computation in htx_xfer_blks()
- DOC: htx: clarify <mark> parameter for htx_xfer_blks()
- BUILD: quic: remove GCC undefined error in qc_release_lost_pkts()
- MEDIUM: htx: prevent <mark> to copy incomplete headers in htx_xfer_blks()
- BUG/MEDIUM: mux-fcgi: Properly handle read0 on partial records
- BUG/MINOR: tevt/http-ana: Remove badly placed event reports
- DEBUG: http-ana: Remove debug counters from HTTP analyzers
- DEBUG: mux-h1: Remove some debug counters
- BUG/MINOR: tcp-rules: Don't forward close during tcp-response content rules eval
- MEDIUM: stream: interrupt costly rulesets after too many evaluations
- BUG/MINOR: http-check: Don't pretend a C-L heeader is set before adding it
- BUILD: ssl: remove a boringssl definition defined by recent boringssl libs
- BUG/MINOR: tevt/mux-h2: Set truncated receive/eos events at SE level on error
- BUG/MEDIUM: flt-spoe: Set/test applet flags instead of SE flags from I/O handler
- BUG/MEDIUM: applet: Don't pretend to have more data to handle EOI/EOS/ERROR
- BUG/MEDIUM: flt-spoe: Properly handle end of stream from the SPOE applet
- MINOR: flt-spoe: Report end of input immediately after applet init
- MINOR: mux-spop: Report EOI on the SE when a ACK is received for a stream
- MINOR: mux-spop: Set SPOP_CF_ERROR flag on connection error only
- MINOR: tevt/mux-spop: Report termination events for the SPOP connect/stream
- CLEANUP: mux-spop: Remove useless comments
- MINOR: mux-spop: Dump info about connections and streams in dedicated functions
- MINOR: mux-spop: Implement .show_sd callback function
- MEDIUM: mux-fcgi: Add a function to propagate termination flags from fstrm to SE
- BUG/MEDIUM: mux-fcgi: Propagate flags to SE in fcgi_strm_wake_one_stream
- MINOR: tevt/mux-fcgi: Report termination events for the FCGI connect/stream
- MINOR: mux-fcgi: Dump info about connections and streams in dedicated functions
- MINOR: mux-spop/mux-fcgi: Add support of the debug string for logs
- BUG/MINOR: cli: Don't set SE flags from the cli applet
- BUG/MINOR: cli: Fix memory leak on error for _getsocks command
- BUG/MINOR: cli: Fix a possible infinite loop in _getsocks()
- BUG/MINOR: config/userlist: Support one 'users' option for 'group' directive
- BUG/MINOR: auth: Fix a leak on error path when parsing user's groups
- BUG/MINOR: flt-trace: Support only one name option
- MINOR: filters: Improve errors formating during filters parsing
- BUG/MINOR: stats-json: Define JSON_INT_MAX as a signed integer
- DOC: option redispatch should mention persist options
- BUG/MINOR: debug: make "debug dev sched" accept a negative TID
- BUG/MINOR: debug: make sure the "debug dev sched" tasks don't block stopping
- IMPORT: plock: export the uninlined version of the lock wait function
- IMPORT: plock: give higher precedence to W than S
- IMPORT: plock: lower the slope of the exponential back-off
- IMPORT: plock: use cpu_relax() for a shorter time in EBO
- Revert "IMPORT: plock: export the uninlined version of the lock wait function"
- BUG/MEDIUM: ssl: chosing correct certificate using RSA-PSS with TLSv1.3
"option redispatch" remains vague in which cases a session would persist;
let's mention "option persist" and "force-persist" as an example so folks
don't draw the conclusion that this may be default.
Should be backported to stable branches.
It is not rare to see configurations with a large number of "tcp-request
content" or "http-request" rules for instance. A large number of rules
combined with cpu-demanding actions (e.g.: actions that work on content)
may create thread contention as all the rules from a given ruleset are
evaluated under the same polling loop if the evaluation is not interrupted
Thus, in this patch we add extra logic around "tcp-request content",
"tcp-response content", "http-request" and "http-response" rulesets, so
that when a certain number of rules are evaluated under the single polling
loop, we force the evaluating function to yield. As such, the rule which
was about to be evaluated is saved, and the function starts evaluating
rules from the save pointer when it returns (in the next polling loop).
We use task_wakeup(task, TASK_WOKEN_MSG) to explicitly wake the task so
that no time is wasted and the processing is resumed ASAP. TASK_WOKEN_MSG
is mandatory here because process_stream() expects TASK_WOKEN_MSG for
explicit analyzers re-evaluation.
rules_bcount stream's attribute was added to count how manu rules were
evaluated since last interruption (yield). Also, SF_RULE_FYIELD flag
was added to know that the s->current_rule was assigned due to forced
yield and not regular yield.
By default haproxy will enforce a yield every 50 rules, this behavior
can be configured using the "tune.max-rules-at-once" global keyword.
There is a limitation though: for now, if the ACT_OPT_FINAL flag is set
on act_opts, we consider it is not safe to yield (as it is already the
case for automatic yield). In this case instead of yielding an taking
the risk of not being called back, we skip the yield and hope it will
not create contention. This is something we should ideally try to
improve in order to yield in all conditions.
"term_events" is a sample fetche function that can be used to get
termination events for all locations in one call. The format equivalent to:
{fc_term_events,fc_mux_term_events,fs.term_events,txn.term_events,bs.term_events,bc_mux_term_events,bc_term_events}
If no event was reported for a location, the field is empty. If the feature
is not supported yet, a dash ('-') is printed.
Pacing has recently been moved out of experimental status and is
activated by default. This is a mandatory requirement for BBR.
Furthermore, BBR is now considered stable. As such, removes its
experimental status with this commit.
Remove pacing experimental status, so it's not required anymore to use
expose-experimental-directives to enable it.
Along this change, pacing is now activated by default. As such, pacing
configuration is transformed into its final form. The global on/off
setting is turned into a disable setting without argument.
Pacing support was previously activated on each bind line individually,
via an optional argument of quic-cc-algo keyword. Remove this optional
argument and introduce a global setting to enable/disable pacing. Pacing
activation is still flagged as experimental.
One important change is that previously BBR usage automatically
activated pacing support. This is not the case anymore, so users should
now always explicitely activate pacing if BBR is selected. A new warning
message will be displayed if this is not the case.
Another consequence of this change is that now pacing_inter callback is
always defined for every quic_cc_algo types. As such, QUIC MUX uses
global.tune.options to determine if pacing is required.
This should be backported up to 3.1, after a period of observation.
Pacing is activated per bind line via an optional boolean argument of
quic-cc-algo keyword. Contrary to the default usage, pacing is
automatically activated when BBR is chosen. This is because this
algorithm is expected to run on top of pacing, else its behavior is
undefined.
Previously, pacing argument was thus ignored when BBR was selected.
Change this to support explicit deactivation of pacing with it. This
could be useful to test BBR without pacing when debugging some issues.
This should be backported up to 3.1, after a period of observation.
shutdown-backup-sessions action for on-marked-up directive does not work anymore
since the stream_shutdown() function was modified to be async-safe.
When stream_shutdown() was modified to be async-safe, dedicated task events were
added to map the reasons to shut a stream down. SF_ERR_DOWN was mapped to
TASK_F_EVT1 and SF_ERR_KILLED was mapped to TASK_F_EVT2. The reverse mapping was
performed by process_stream() to shut the stream with the appropriate reason.
However, SF_ERR_UP reason, used by shutdown-backup-sessions action to shut a
stream down because a preferred server became available, was not mapped in the
same way. So since commit b8e3b0a18d ("BUG/MEDIUM: stream: make
stream_shutdown() async-safe"), this action is ignored and does not work
anymore.
To fix an issue, and being able to bakcport the fix, a third task event was
added. TASK_F_EVT3 is now mapped on SF_ERR_UP.
This patch should fix the issue #2848. It must be backported as far as 2.6.
A few times in the past we've seen cases where epoll was caught reporting
a wrong event that caused trouble (e.g. spuriously reporting HUP or RDHUP
after a successful connect()). The new tune.epoll.mask-events directive
permits to mask events such as ERR, HUP and RDHUP and convert them to IN
events that are processed by the regular receive path. This should help
better diagnose and troubleshoot issues such as this one, as well as rule
out such a cause when similar issues are reported:
https://github.com/haproxy/haproxy/issues/2368https://www.spinics.net/lists/netdev/msg876470.html
It should be harmless to backport this if necessary.
Released version 3.2-dev4 with the following main changes :
- BUG/MINOR: stktable: fix big-endian compatiblity in smp_to_stkey()
- MINOR: stktable: add stkey_to_smp() helper
- MINOR: stktable: add stksess_getkey() helper
- MINOR: stktable: add sc[0-2]_key fetches
- BUG/MEDIUM: queues: Adjust the proxy counters when appropriate
- MINOR: trace: add help message for -dt argument
- MINOR: trace: ensure -dt priority over traces config section
- MINOR: trace: support all source alias on -dt
- BUG/MINOR: quic: reject NEW_TOKEN frames from clients
- MINOR: stktable: fix potential build issue in smp_to_stkey
- BUG/MEDIUM: stktable: fix missing lock on some table converters
- BUG/MEDIUM: promex: Use right context pointers to dump backends extra-counters
- MINOR: stktable: fix potential build issue in smp_to_stkey (2nd try)
- MINOR: stktable: add smp_fetch_stksess() helper function
- MEDIUM: stktable: split src-based key smp_fetch_sc functions
- MEDIUM: stktable: split sc_ and src_ fetch lookup logics
- MEDIUM: stktable: leverage smp_fetch_* helpers from sample conv
- DOC: config: unify sample conv|fetches optional arguments syntax
- DOC: config: stick-table converters support implicit <table> argument
- DOC: config: stick-table converter do accept ANY-typed input
- DOC: config: clarify return type for some stick-table converters
- DOC: config: refer to canonical sticktable converters for src_* fetches
- CLEANUP: stktable: move sample_conv_table_bytes_out_rate()
- MINOR: stktable: add table_{inc,clr}_gpc* converters
- BUG/MAJOR: quic: reject too large CRYPTO frames
- BUG/MAJOR: log/sink: possible sink collision in sink_new_from_srv()
- BUG/MINOR: init: set HAPROXY_STARTUP_VERSION from the variable, not the macro
- REORG: version: move the remaining BUILD_* stuff from haproxy.c to version.c
- BUG/MINOR: quic: ensure a detached coalesced packet can't access its neighbours
- MINOR: quic: Add a BUG_ON() on quic_tx_packet refcount
- BUILD: quic: Move an ASSUME_NONNULL() for variable which is not null
- BUG/MEDIUM: mux-h1: Properly close H1C if an error is reported before sending data
- CLEANUP: quic: remove unused prototype
- MINOR: quic: rename pacing_rate cb to pacing_inter
- BUG/MINOR: quic: do not increase congestion window if app limited
- MINOR: mux-quic: increment pacing retry counter on expired
- MEDIUM: quic: implement credit based pacing
- MEDIUM: mux-quic: reduce pacing CPU usage with passive wait
- MEDIUM: quic: use dynamic credit for pacing
- MINOR: quic: remove unused pacing burst in bind_conf/quic_cc_path
- MINOR: quic: adapt credit based pacing to BBR
- MINOR: tools: add errname to print errno macro name
- MINOR: debug: debug_parse_cli_show_dev: use errname
- MINOR: debug: show boot and runtime process settings in table
Major improvements have been introduced in pacing recently. Most
notably, QMUX schedules emission on a millisecond resolution, which
allow to use passive wait to be much CPU friendly.
However, an issue remains with the pacing max credit. Unless BBR is
used, it is fixed to the configured value from quic-cc-algo bind
statement. This is not practical as if too low, it may drastically
reduce performance due to 1ms sleep resolution. If too high, some
clients will suffer from too much packet loss.
This commit fixes the issue by implementing a dynamic maximum credit
value based on the network condition specific to each clients.
Calculation is done to fix a maximum value which should allow QMUX
current tasklet context to emit enough data to cover the delay with the
next tasklet invokation. As such, avg_loop_us is used to detect the
process load. If too small, 1.5ms is used as minimal value, to cover the
extra delay incurred by the system which will happen for a default 1ms
sleep.
This should be backported up to 3.1.
Pacing algorithm has been revamped in the previous commit to implement a
credit based solution. This is a far more adaptative solution, in
particular which allow to catch up in case pause between pacing emission
was longer than expected.
This allows QMUX to remove the active loop based on tasklet wake-up.
Instead, a new task is used when emission should be paced. The main
advantage is that CPU usage is drastically reduced.
New pacing task timer is reset each time qcc_io_send() is invoked. Timer
will be set only if pacing engine reports that emission must be
interrupted. In this case timer is set via qcc_wakeup_pacing() to the
delay reported by congestion algorithm, or 1ms if delay is too short. At
the end of qcc_io_cb(), pacing task is queued if timer has been set.
Pacing task execution is simple enough : it immediately wakes up QCC I/O
handler.
Note that to have decent performance, it requires to have a large enough
burst defined in configuration of quic-cc-algo. However, this value is
common to every listener clients, which may cause too much loss under
network conditions. This will be address in a future patch.
This should be backported up to 3.1.
As discussed in GH #2423, there are some cases where src_{inc,clr}_gpc*
is not sufficient because we need to perform the lookup on a specific
key. Indeed, just like we did in e642916 ("MEDIUM: stktable: leverage
smp_fetch_* helpers from sample conv"), we can easily implement new
table converters based on existing fetches. This is what we do in
this patch.
Also the doc was updated so that src_{inc,clr}_gpc* fetches now point to
their generic equivalent table_{inc,clr}_gpc*. Indeed, src_{inc,clr}_gpc*
are simply aliases.
This should fix GH #2423.
When available, to prevent doc duplication, let's make src_* fetches
point to equivalent table_* converters, as they are in fact aliases
for src,table_* converters.
Some stick-table converters such as "table_gpt" erroneously suggest that
the returned type is a boolean while in fact it is integer type, as
properly documented for the sample fetch equivalents.
Since 2d17db58 ("MINOR: stick-table: change all stick-table converters'
inputs to SMP_T_ANY"), all stick-table converters accept ANY input
type as parameter, this means that it does no longer restrict the key as
a string representation of the input. However the doc wasn't updated when
the change was made. Moreover, some converters document the updated behavior
while others don't, which is kind of confusing, let's fix that.
As with stick-table sample fetches, the <table> argument is not strictly
needed and defaults to the current proxy's stick-table when not provided
Let's update the doc and prototype to reflect the current behavior.
The most common way (and proper way it seems) to declare optional
arguments in sample fetch or converters' prototype is to declare
them between square brackets, including the leading coma (because the
coma should be omitted if the argument is not provided). Also, when
multiple optional arguments are found, we should apply the same logic
but recursively.
In this patch we fix prototypes that include optional arguments and don't
follow this syntax. This improves readibility and sets the norm for
upcoming sample fetches/converters.
As discussed in GH #1750, we were lacking a sample fetch to be able to
retrieve the key from the currently tracked counter entry. To do so,
sc_key fetch can now be used. It returns a sample with the correct type
(table key type) corresponding to the tracked counter entry (from previous
track-sc rules).
If no entry is currently tracked, it returns nothing.
It can be used using the standard form "sc_key(<sc_number>)" or the legacy
form: "sc0_key", "sc1_key", "sc2_key"
Documentation was updated.
Released version 3.2-dev3 with the following main changes :
- DOC: config: add missing "track-sc0" in action keywords matrix
- BUG/MINOR: stktable: invalid use of stkctr_set_entry() with mixed table types
- BUG/MAJOR: mux-quic: fix BUG_ON on empty STREAM emission
- BUG/MEDIUM: mux-h2: Count copied data when looping on RX bufs in h2_rcv_buf()
- Revert "BUG/MAJOR: mux-quic: fix BUG_ON on empty STREAM emission"
- BUG/MAJOR: mux-quic: properly fix BUG_ON on empty STREAM emission
- MINOR: mux-quic: add traces on sd attach
- BUG/MEDIUM: mux-quic: do not attach on already closed stream
- BUG/MINOR: compression: handle a possible strdup() failure
- BUG/MINOR: pool: handle a possible strdup() failure
- BUG/MINOR: cfgparse-tcp: handle a possible strdup() failure
- BUG/MINOR: log: Allow to use if/unless conditionnals for do-log action
- MINOR: config: Alert about extra arguments for errorfile and errorloc
- BUG/MINOR: mux-quic: fix wakeup on qcc_set_error()
- MINOR: mux-quic: change return value of qcs_attach_sc()
- BUG/MINOR: mux-quic: handle closure of uni-stream
- BUG/MEDIUM: promex/resolvers: Don't dump metrics if no nameserver is defined
- BUG/MAJOR: ssl/ocsp: fix NULL conn object dereferencing to access QUIC TLS counters
- MEDIUM: errors: get rid of shm_open()
- BUILD: makefile: do not clean standalone binaries on a simple "make clean"
- BUILD: makefile: add a qinfo macro to pass info in quiet mode
- DEV: ncpu: add a simple utility to help with NUMA development
- DEV: ncpu: implement a wrapper mode
- DEV: ncpu: make the wrapper work both as a lib and executable
- BUG/MEDIUM: h1-htx: Properly handle bodyless messages
- MINOR: tools: add a few functions to simply check for a file's existence
In d54e8f8107 ("DOC: config: reorganize actions into their own section"),
"track-sc0" keyword was properly documented but the keyword was not placed
in the action keywords matrix alongside other track-sc* statements. It
was probably overlooked, so let's fix that.
Could be backported up to 2.9 with d54e8f8107.
Released version 3.2-dev2 with the following main changes :
- MINOR: build: define DEBUG_STRESS
- MINOR: applet: define applet_putchk_stress() alternative
- MINOR: stats: use stress mode to force reentrant dumps
- CI: scripts: add support for AWS-LC-FIPS in build-ssl.sh
- MINOR: ssl: add "FIPS" details in haproxy -vv
- MEDIUM: ssl: rename 'OpenSSL' by 'SSL library' in haproxy -vv
- CI: github: let's add an AWS-LC-FIPS job
- MINOR: window_filter: rely on the time to update the filter samples (QUIC/BBR)
- BUG/MINOR: quic: wrong logical statement in in_recovery_period() (BBR)
- BUG/MINOR: quic: fix BBB max bandwidth oscillation issue.
- BUG/MINOR: quic: wrong bbr_target_inflight() implementation
- BUG/MINOR: quic: remove max_bw filter from delivery rate sampling
- BUG/MINOR: quic: underflow issue for bbr_inflight_hi_from_lost_packet()
- BUG/MINOR: quic: reduce packet losses at least during ProbeBW_CRUISE (BBR)
- MINOR: quic: reduce the private data size of QUIC cc algos
- CLEANUP: quic: remove a wrong comment about ->app_limited (drs)
- BUG/MINOR: quic: fix the wrong tracked recovery start time value
- BUG/MINOR: quic: too permissive exit condition for high loss detection in Startup (BBR)
- BUG/MINOR: cli: cli_snd_buf: preserve \r\n for payload lines
- REGTESTS: ssl: add a PEM with mix of LF and CRLF line endings
- BUG/MINOR: quic: missing Startup accelerating probing bw states
- CLEANUP: quic: Rename some BBR functions in relation with bw probing
- REORG: startup: move global.maxconn calculations in limits.c
- REORG: startup: move code that applies limits to limits.c
- REORG: startup: move nofile limit checks in limits.c
- MINOR: ssl: add utils functions to extract X509 notAfter date
- MINOR: ssl/cli: allow to filter expired certificates with 'show ssl sni'
- MINOR: ssl/cli: add -A to the 'show ssl sni' command description
- BUG/MINOR: ssl/cli: 'show ssl cert' escape the first '*' of a filename
- BUG/MINOR: ssl/cli: 'show ssl crl-file' escape the first '*' of a filename
- BUG/MINOR: ssl/cli: 'show ssl ca-file' escape the first '*' of a filename
- BUG/MEDIUM: stconn: Only consider I/O timers to update stream's expiration date
- BUG/MEDIUM: queues: Make sure we call process_srv_queue() when leaving
- BUG/MEDIUM: queues: Do not use pendconn_grab_from_px().
- CLEANUP: queues: Remove pendconn_grab_from_px().
- BUILD: debug: only dump/reset glitch counters when really defined
- MINOR: compiler: add a __has_builtin() macro to detect features more easily
- MINOR: compiler: rely on builtin detection for __builtin_unreachable()
- MINOR: compiler: add a new "ASSUME" macro to help the compiler
- MINOR: compiler: also enable __builtin_assume() for ASSUME()
- MINOR: compiler: add ASSUME_NONNULL() to tell the compiler a pointer is valid
- MINOR: bug: make BUG_ON() fall back to ASSUME
- CLEANUP: cache: use ASSUME_NONNULL() instead of DISGUISE()
- CLEANUP: hlua: use ASSUME_NONNULL() instead of ALREADY_CHECKED()
- CLEANUP: htx: use ASSUME_NONNULL() to mark the start line as non-null
- CLEANUP: mux-fcgi: use ASSUME_NONNULL() to indicate that the first block exists
- CLEANUP: stats: use ASSUME_NONNULL() to indicate that the first block exists
- CLEANUP: quic: replace ALREADY_CHECKED() with ASSUME_NONNULL() at a few places
- CLEANUP: ssl-sock: drop two now unneeded ALREADY_CHECKED()
- BUG/MEDIUM: mux-quic: do not mix qcc_io_send() return codes with pacing
- CLEANUP: mux-quic: remove unused qcc member send_retry_list
- MINOR: quic: add traces
- MINOR: mux-quic: refactor wait-for-handshake support
- MEDIUM/OPTIM: mux-quic: define a recv_list for demux resumption
- MEDIUM/OPTIM: mux-quic: implement purg_list
- MINOR: mux-quic: extract code to build STREAM frames list
- MINOR: mux-quic: split STREAM and RS/SS emission
- MEDIUM/OPTIM: mux-quic: do not rebuild frms list on every send
- MEDIUM: mux-quic: remove pacing specific code on qcc_io_cb
- MINOR: trace: implement tracing disabling API
- MINOR: mux-quic: hide traces when woken up on pacing only
- MINOR: ssl/cli: add a 'Uncommitted' status for 'show ssl' commands
- MINOR: ssl/ocsp: Add extra details in error logs when possible
- BUILD: ssl/ocsp: error: ‘%.*s’ directive argument is null
- MEDIUM: ssl/ocsp: OCSP response is expired with OCSP_MAX_RESPONSE_TIME_SKEW
- MINOR: ssl: improve HAVE_SSL_OCSP ifdef
- DOC: config: add example for server "track" keyword
- DOC: config: reorder "tune.lua.*" keywords by alphabetical order
- DOC: config: add "tune.lua.burst-timeout" to the list of global parameters
- MINOR: hlua: add option to preserve bool type from smp to lua
- REGTESTS: fix lua-based regtests using tune.lua.smp-preserve-bool
- BUG/MEDIUM: mux-quic: prevent BUG_ON() by refreshing frms on MAX_DATA
- CLEANUP: mux-quic: remove dead err label in qcc_build_frms()
- BUG/MINOR: h2/rhttp: fix HTTP2 conn counters on reverse
- MINOR: hlua: rename "tune.lua.preserve-smp-bool" to "tune.lua.bool-sample-conversion"
- MINOR: ssl: change visibility of ssl_stats_module
- MINOR: ssl: rework the error management in the OCSP callback
- MEDIUM: ssl/ocsp: counters for OCSP stapling
- CI: limit aws-lc and libressl Quic Interop to "haproxy" only
- BUG/MEDIUM: queue: Make process_srv_queue return the number of streams
- CI: github: try to build the latest WolfSSL master weekly
- CI: github: activate ASAN on the WolfSSL weekly job
- BUG/MINOR: stats: fix segfault caused by uninitialized value in "show schema json"
- MINOR: stktable: add stktable_get_data_type_idx() helper function
- MINOR: stktable: support optional index for array types in {set, clear, show} table commands
- CI: scripts: allow to build wolfssl with --enable-debug
- CI: github: activate debug in wolfssl weekly build
- BUG/MEDIUM: queues: Stricly respect maxconn for outgoing connections
- MEDIUM: queue: Handle the race condition between queue and dequeue differently
- CLEANUP: Remove pendconn_must_try_again().
- BUILD: compat: add missing fcntl.h before defining F_SETPIPE_SZ
- BUILD: mworker: always initialize the saveptr of strtok_r()
- BUILD: limits: make normalize_rlim() take an rlim_t to fix build on m68k
- BUG/MINOR: checks: handle a possible strdup() failure
- BUG/MINOR: listener: handle a possible strdup() failure
- BUG/MINOR: mux_h1: handle a possible strdup() failure
- BUG/MINOR: debug: handle a possible strdup() failure
As discussed in GH #2286, {set, clear, show} table commands were unable
to deal with array types such as gpt, because they handled such types as
a non-array types, thus only the first entry (ie: gpt[0]) was considered.
In this patch we add an extra logic around array-types handling so that
it is possible to specify an array index right after the type, like this:
set table peer/table key mykey data.gpt[2] value
# where 2 is the entry index that we want to access
If no index is specified, then it implicitly defaults to 0 to mimic
previous behavior.
A better name was found for the option implemented in ec74438
("MINOR: hlua: add option to preserve bool type from smp to lua")
Indeed, "tune.lua.preserve-smp-bool {on | off}" wasn't explicit enough
nor did it encourage the adoption of the new "fixed" behavior (vs
historical behavior which is now considered as a bug).
Thus it becomes "tune.lua.bool-sample-conversion { normal | pre-3.1-bug }"
which actively encourage users to switch the new behavior after having
patched in-use Lua script if needed. From a technical point of view,
the logic remains the same, as the option currently defaults to
"pre-3.1-bug" to prevent script breakage, and a warning is emitted if
the option isn't set explicily and Lua is used.
Documentation and regtests were updated.
Must be backported in 3.1 with ec74438 and f2838f5 ("REGTESTS: fix
lua-based regtests using tune.lua.smp-preserve-bool")
As discussed in GH #2814, there is an ambiguity in hlua implementation
that causes haproxy smp boolean type to be pushed as an integer on the
Lua stack. On the other hand, when doing Lua to haproxy smp conversion,
the boolean type is properly perserved. Of course this situation is not
desirable and can lead to unexpected results. However we cannot simply
fix the behavior because in Lua boolean and integer types are not
are completely distinct types and cannot be used interchangeably. So in
order to prevent breaking existing scripts logic, in this patch we add a
dedicated lua tunable named "tune.lua.smp-preserve-bool" which can take
the following values:
- "on" : when converting haproxy smp to lua, boolean type is preserved
- "off": when converting haproxy smp to lua, boolean is converted to
integer (legacy behavior)
For now, the tunable defaults to "off" to preserve historical behavior.
However, when the option isn't set explicitly and lua is used, a warning
will be emitted in order to raise user's awareness about this ambiguity.
It is expected that the tunable could default to "on" in future versions,
thus it is recommended to avoid setting it to "off" except when using
existing Lua scripts that still rely on the old behavior regarding boolean
smp to Lua conversion, and that they cannot be fixed easily.
This should solve issue GH #2814. It may be relevant to backport this in
haproxy 3.1.
"tune.lua.burst-timeout" was properly defined but not listed in the list
of global parameters as it was overlooked in 58e36e5b1 ("MEDIUM: hlua:
introduce tune.lua.burst-timeout")
Effort was made to properly organize "tune.*" keywords by alphabetical
order, but "tune.lua" keywords didn't follow that rule with care.
Let's fix that.
As requested on GH #2325, "track" server keyword could benefit from a
simple config example to show how to make use of it.
That's what we're doing in this commit, thanks to GH user @HAkmiller
for the suggestion.
When the ocsp response auto update process fails during insertion or
while validating the received ocsp response, we call
ssl_sock_update_ocsp_response or ssl_ocsp_check_response respectively
and both these functions take an 'err' parameter in which detailed error
messages can be written. Until now, those error messages were discarded
and the only information given to the user was a generic error
(ERR_CHECK or ERR_INSERT) which does not help much.
We now keep a pointer to the last error message in the certificate_ocsp
structure and dump its content in the update logs as well as in the
"show ssl ocsp-updates" cli command.
This issue was raised in GitHub #2817.
When doing a 'show ssl ca-file <filename>', prefixing a filename with a '*'
allows to show the uncommited transaction asociated to this filename.
However for people using '*' as the first character of their
filename, there is no way to access this filename.
This patch fixes the problem by allowing to escape the first
character with \.
This should be backported in every stable branches.
When doing a 'show ssl crl-file <filename>', prefixing a filename with a '*'
allows to show the uncommited transaction asociated to this filename.
However for people using '*' as the first character of their
filename, there is no way to access this filename.
This patch fixes the problem by allowing to escape the first
character with \.
This should be backported in every stable branches.
When doing a 'show ssl cert <filename>', prefixing a filename with a '*'
allows to show the uncommited transaction asociated to this filename.
However for people using '*' as the first character of their filename,
there is no way to access this filename.
This patch fixes the problem by allowing to escape the first character
with \.
This should be backported in every stable branches.
Define a new build mode DEBUG_STRESS. This will be used to stress some
code parts which cannot be reproduce easily with an alternative
suboptimal code.
First, a global <mode_stress> is set either to 1 or 0 depending on
DEBUG_STRESS compilation. A new global keyword "stress-level" is also
defined. It allows to specify a level from 0 to 9, to increase the
stress incurred on the code.
Helper macro STRESS_RUN* are defined for each stress level. This allows
to easily specify an instruction in default execution and a stress
counterpart if running on the corresponding stress level.
Released version 3.2-dev1 with the following main changes :
- MINOR: pattern: split pat_ref_set()
- MINOR: pattern: add pat_ref_gen_set() function
- MINOR: pattern: add pat_ref_gen_find_elt() function
- MINOR: pattern: add pat_ref_gen_delete() function
- MEDIUM: pattern: consider gen_id in pat_ref_set_from_node()
- MEDIUM: pattern: always consider gen_id for pat_ref lookup operations
- MINOR: version: this is development again (3.2)
- DEV: patchbot: prepare for new version 3.2-dev
- BUG/MEDIUM: sock: Remove FD_POLL_HUP during connect() if FD_POLL_ERR is not set
- MINOR: proxy: Add support of 421-Misdirected-Request in retry-on status
- BUG/MINOR: log: fix lf_text() behavior with empty string
- MINOR: log: always consider "+M" option in lf_text_len()
- BUG/MINOR: improve BBR throughput on very fast links
- MINOR: event_hdl: add PAT_REF events
- MINOR: pattern: publish event_hdl events on pat_ref updates
- MINOR: hlua: add patref class
- MINOR: hlua: add core.get_patref method
- MINOR: hlua_fcn: implement index and pair metamethods for patref class
- MINOR: hlua_fcn: wrap pat_ref struct for patref class
- MINOR: pattern: add pat_ref_may_commit() helper function
- MINOR: hlua_fcn: add Patref:commit() method
- MINOR: hlua_fcn: add Patref:prepare() method
- MINOR: hlua_fcn: add Patref:purge() method
- MINOR: hlua_fcn: add Patref:giveup()
- MINOR: hlua_fcn: add Patref:add()
- MINOR: hlua_fcn: add Patref:del()
- MINOR: hlua_fcn: add Patref:set()
- MINOR: hlua_fcn: add Patref:add_bulk()
- MINOR: hlua_fcn: add Patref:event_sub()
- DOC: lua: prefer Patref:{set,add}() over legacy methods for acl and maps
- BUG/MINOR: hlua_fcn: fix Patref:set() force parameter
- BUG/MEDIUM: event_hdl: fix uninitialized value in async mode when no data is provided
- BUG/MEDIUM: quic: prevent stream freeze on pacing
- BUG/MEDIUM: http-ana: Reset request flag about data sent to perform a L7 retry
- BUG/MINOR: h1-htx: Use default reason if not set when formatting the response
- BUILD: quic: fix a build error about an non initialized timestamp
- CI: github: allow coredumps on aws-lc and wolfssl jobs
- BUG/MINOR: listener: fix potential null pointer dereference in listener_release()
- MINOR: hlua: fix ambiguous hlua usage in hlua_filter_delete()
- BUG/MINOR: signal: register default handler for SIGINT in signal_init()
- BUG/MINOR: startup: close pidfd and free global.pidfile in handle_pidfile()
- BUG/MINOR: startup: fix pidfile creation
- MINOR: tools: add a new macro DEFVAL() to provide a default argument
- MINOR: tasklet: set TASK_WOKEN_OTHER on tasklets by default
- BUG/MINOR: quic: fix bbr_inflight() calls with wrong gain value
- BUG/MEDIUM: init: make sure only daemonized processes change their session
- BUG/MINOR: init: do not call fork_poller() for non-forked processes
- BUG/MEDIUM: mux-quic: remove pacing status when everything is sent
- BUG/MINOR: quic: remove startup alert if conn socket-owner unsupported
- BUG/MINOR: quic: remove startup alert if GSO unsupported
- MINOR: stktable: implement "recv-only" table option
- CLEANUP: stktable: replace nopurge attribute with flag
- CLEANUP: stktable: add some stktable flags polishing
- BUG/MEDIUM: mux-h2: make sure not to touch dummy streams when sending WU
- MINOR: mux-quic: clean up zero-copy done_ff callback
- BUG/MINOR: config: Fix parsing of accept-invalid-http-{request,response}
- BUG/MINOR: mworker: don't save program PIDs in oldpids
- BUG/MINOR: mworker: fix -D -W -sf/-st modes
- BUG/MINOR: startup: fix error path for master, if can't open pidfile
- CLEANUP: startup: make if condition to kill old pids more readable
- DOC: config: fix confusing init-state examples
- MINOR: mux-h1: use explicit __objt_server on idle conn reinsert
- MINOR: mux-h2: use explicit __objt_server on idle conn reinsert
- MINOR: mux-spop: use explicit __objt_server on idle conn reinsert
- MINOR: mux-fcgi: use explicit __objt_server on idle conn reinsert
- MINOR: quic: convert startup check in a freestanding function
- MINOR: quic: split startup check function
- MINOR: quic: implement build options report
- BUG/MINOR: debug: COUNT_IF() should return true/false
- MINOR: mux-h2/traces: add a missing trace on negative initial window size
- CLEANUP: mux-h2/traces: reword certain ambiguous traces
- MINOR: mux-h2/glitches: add a description to the H2 glitches
- BUG/MINOR: mux-h2: fix expression when detecting excess of CONTINUATION frames
- BUILD: debug: fix build issues in COUNT_IF() with -Wunused-value
- MINOR: tools: make fddebug() automatically emit the location
- MINOR: ssl: add notBefore and notAfter utility functions
- MEDIUM: ssl/cli: "show ssl sni" list the loaded SNI in frontends
- BUG/MEDIUM: startup: don't daemonize if started with -c
- BUG/MEDIUM: startup: report status if daemonized process fails
- BUG/MEDIUM: mworker: report status, if daemonized master fails
- BUG/MINOR: mworker: detach from tty when received READY from worker
- BUG/MINOR: namespace: handle a possible strdup() failure
- BUG/MINOR: ssl_crtlist: handle a possible strdup() failure
- BUG/MINOR: resolvers: handle a possible strdup() failure
- CI: use "/tmp" as default value for TMPDIR when searching logs
- DOC: management: fix typos and paragraph ordering in 'show ssl sni'
- CLEANUP: ssl: fix comment in 'show ssl sni'
- MINOR: ssl/cli: add negative filters to "show ssl sni"
- BUG/MINOR: stats: decrement srv refcount on stats-file release
- MINOR: list: define a watcher type
- BUG/MEDIUM: stats/server: use watcher to track server during stats dump
- MINOR: server: remove prev_deleted server list
- BUG/MINOR: http-fetch: Ignore empty argument string for query()
- BUG/MINOR: server-state: Fix expiration date of srvrq_check tasks
- BUG/MINOR: hlua_fcn: restore server pairs iterator pointer consistency
The 'show ssl sni' output can be confusing when using crt-list, because
the wildcards can be completed with negative filters, and they need to
be associated to the same line.
Having a negative filter on its line alone does not make much sense,
this patch adds a new 'Negative Filter' column that show the exception
applied on a wildcard from a crt-list line.
The "show ssl sni" command, allows one to dump the list of SNI in an
haproxy process, or a designated frontend.
It lists the SNI with the type, filename, and dates of expiration and
activation
in 50322dff ("MEDIUM: server: add init-state"), some examples on how to
use init-state server keyword were added alongside with the keyword
documentation.
However, as reported by Nick Ramirez, there was an error because the
example that stated that haproxy will pass the traffic to the server after
3 successful health checks used the "init-state down" instead of the
"init-state fully-down". Thus the behavior wouldn't match what the
comment said (only 1 successful health check was required).
Here we fix the example in itself to match with the comment. Also the
following example ("# or") was also affected, but it is kind of
redundant as the main purpose of the examples are to illustrate the
feature in itself and not how to use server-template directive, so we
remove it.
This should be backported in 3.1 with 50322dff
When "recv-only" keyword is added on a stick table declaration (in peers
or proxy section), haproxy considers that the table is only used for
data retrieval from a remote location and not used to perform local
updates. As such, it enables the retrieval of local-only values such
as conn_cur that are ignored by default. This can be useful in some
contexts where we want to know about local-values such are conn_cur
from a remote peer.
To do this, add stktable struct flags which default to NONE and enable
the RECV_ONLY flag on the table then "recv-only" keyword is found in the
table declaration. Then, when in peer_treat_updatemsg(), when handling
table updates, don't ignore data updates for local-only values if the flag
is set.
Patref:set(key, val[, force]) takes optional "force" parameter (defaults
to false) to force the entry to be created if it doesn't already exist
To retrieve the value, lua_tointeger() was used in place of
lua_toboolean(), and because of that force is not enabled if "true"
is passed as parameter (only numbers were recognized) despite the
documentation mentioning that "force" is a boolean.
To fix the issue, we replace lua_tointeger by lua_toboolean.
Also, the doc was updated to rename "bool" to "boolean" for the "force"
parameter to stay consistent with historical naming in the file.
No backport needed unless 9ee37de5c ("MINOR: hlua_fcn: add Patref:set()")
is.
Patref:set() can achieve the same thing as core.set_map()
Patref:add() can achieve the same thing as core.add_acl()
Patref:del() can achieve the same thing as core.del_map() and
core.del_acl()
As a bonus, Patref:{set,add} are more efficient than their core
legacy equivalent, because they don't require systematic pattern
reference lookup for each individual operation.
Let's mention that in the doc to encourage Patref methods adoption.
Just like we did for server events, in this patch we expose the PAT_REF
event family (see "MINOR: event_hdl: add PAT_REF events") in Lua.
Unlike server events, Patref events don't provide additional event data,
and the registration can only take place from a Patref object (ie: not
globally).
Thanks to this commit it now becomes possible to trigger actions when
updates are performed on a map (or acl list) being monitor, without
the need to loop or use inefficient workarounds.
There is no cli equivalent for this one. It is similar to Patref:add()
excepts thay it takes a table as parameter (for acl: table of keys, for
maps: table of keys:values). The goal is to add multiple entries at once
to limit locking time to the strict minimum. It is recommended to use this
one over Patref:add() when adding multiple entries at once.
Just like "set map" on the cli, the Patref:set() method (only relevant
for maps) can be used to modify an existing entry's value in the pattern
reference pointed to by the Lua Patref object. Lookup is performed on the
key. The update will target the live pattern reference version, unless
Patref:prepare() is ongoing.
Just like "del map" and "del acl" on the cli, the Patref:del() method can
be used to delete an existing entry in the pattern reference pointed to
by the Lua Patref object. The update will target the live pattern
reference version, unless Patref:prepare() is ongoing.
Just like "add map" and "add acl" on the cli, the Patref:add() method can
be used to add a new entry to the pattern reference pointed to by the
Lua Patref object. The update will target the live pattern reference
version, unless Patref:prepare() is ongoing.
If Patref:commit() was used and the new version (generation) isn't going
to be committed, calling Patref:giveup() will allow allocated resources
to be freed and reused. It is a good habit to call this if commit()
isn't called after a prepare().
It is a special Lua Patref method: it bypasses the commit/prepare logic
and purges the whole pattern reference items pointed to by Patref Lua
object (all versions, not just the current one). It doesn't have a cli
equivalent: it leverages pat_ref_purge_range().
Just like the "prepare map" or "prepare acl" on the cli, but for Lua:
it leverages the pattern API to create a subset (ie: a new generation id)
that will automatically be used as target for following Patref operations
(add/set/del...) until the "commit" method is invoked to atomically push
the pending updates.
commit() method may be used to commit pending updates on the local patref
object:
hlua_patref flags were added:
HLUA_PATREF_FL_GEN means the patref object has been updated
and it is associated to a new revision (curr_gen) in order to prepare
and commit the pending updates.
upon commit, the pattern API is leveraged with curr_gen as revision to
commit new object items. Once commit is performed, previous (pending)
revisions that are older than the committed one are cleaned up (similar
to what's done with commit on the cli). Also, Patref function APIs now
take into account curr_gen to perform lookups.
patref object may now leverage index and pair methamethods to list and
access patref elements at a specific index (=key)
Also, patref:is_map() method may be used to know if the patref stores acl
(key only) or map-style (key:value) patterns.
core.get_patref() method may be used to get a reference to a pattern
object (pat_ref struct which is used for maps and acl storage) from
Lua by providing the reference name (filename for files, or prefix+name
for opt or virtual pattern references).
Lua documentation was updated.
The "421" status can now be specified on retry-on directives. PR_RE_* flags
were updated to remains sorted.
This patch should fix the issue #2794. It is quite simple so it may safely
be backported to 3.1 if necessary.
Released version 3.1.0 with the following main changes :
- BUG/MAJOR: mux-h1: Properly handle wrapping on obuf when dumping the first-line
- BUILD: activity/memprofile: fix a build warning in the posix_memalign handler
- BUG/MINOR: quic: Avoid BUG_ON() on ->on_pkt_lost() BBR callback call
- CI: update to the latest AWS-LC version
- CI: update to the latest WolfSSL version
- DOC: ot: mention planned deprecation of the OT filter
- Revert "CI: update to the latest WolfSSL version"
- CI: github: add a WolfSSL job which tries the latest version
- BUILD: systemd: fix usage of reserved name "sun" in the address field
- BUILD: init: use the more portable FD_CLOEXEC for /dev/null
- CI: github: improve the Wolfssl job
- CI: github: improve the AWS-LC job
- BUG/MINOR: mux-quic: fix show quic report of QCS prepared bytes
- BUG/MEDIUM: quic: fix sending performance due to qc_prep_pkts() return
- MINOR: mux-quic: use sched call time for pacing
- CI: github: allow to run the Illumos job manually
- BUILD: tcp_sample: var_fc_counter defined but not used
- CI: github: add 'workflow_dispatch' on remaining build jobs
- DOC: config: refine a little bit the text on QUIC pacing
- MINOR: proto_sockpair: send_fd_uxst: init iobuf, cmsghdr, cmsgbuf to zeros
- MINOR: startup: rename on_new_child_failure to mworker_on_new_child_failure
- REORG: startup: move on_new_child_failure in mworker.c
- MINOR: startup: prefix prepare_master and run_master with mworker_*
- REORG: startup: move mworker_prepare_master in mworker.c
- MINOR: startup: keep updating verbosity modes only in haproxy.c
- REORG: startup: move mworker_run_master and mworker_loop in mworker.c
- REORG: startup: move mworker_reexec and mworker_reload in mworker.c
- MINOR: startup: prefix apply_master_worker_mode with mworker_*
- REORG: startup: move mworker_apply_master_worker_mode in mworker.c
- MINOR: cfgparse-quic: strengthen quic-cc-algo parsing
- BUG/MAJOR: quic: fix wrong packet building due to already acked frames
- DEV: lags/show-sess-to-flags: Properly handle fd state on server side
- BUG/MEDIUM: http-ana: Don't release too early the L7 buffer
- MINOR: quic: make bbr consider the max window size setting
- DOC: quic: Amend the pacing information about BBR.
- BUG/MEDIUM: quic: prevent EMSGSIZE with GSO for larger bufsize
- MINOR: cli: Add a "help" keyword to show sess
- MINOR: cli/quic: Add a "help" keyword to show quic
- DOC: management: mention "show sess help" and "show quic help"
- DOC: install: update the list of supported versions
- MINOR: version: mention that 3.1 is stable now
The QUIC pacing options changed a few times during their development.
For example the unit is now in datagrams not bytes. Also a few
sentences were slightly ambiguous so let's reword this.
No backport is needed.
Miroslav mentioned below that he's currently working on an OpenTelemetry
replacement for the OpenTracing filter since OpenTracing itself is no
longer maintained nor supported:
https://github.com/haproxy/haproxy/issues/2782#issuecomment-2493576327
Given that he aims for 3.2, let's already settle on an upcoming deprecation
of the filter for 3.3 with a removal for 3.5. This will leave time to finish
the development and permit users to switch smoothly. At this point no warning
is emitted (since the users have no alternative) but better mention this plan
in the doc to make them aware of future changes.
Released version 3.1-dev14 with the following main changes :
- MINOR: acl: export find_acl_default()
- MINOR: sample: extend the "when" converter to support an ACL
- MINOR: cfgparse: parse tune.{rcvbuf,sndbuf}.{client,server} as sizes
- MINOR: cfgparse: parse tune.{rcvbuf,sndbuf}.{frontend,backend} as sizes
- MINOR: cfgparse: parse tune.pipesize as a size
- MINOR: cfgparse: parse tune.recv_enough as a size
- MINOR: cfgparse: parse tune.bufsize as a size
- MINOR: cfgparse: parse tune.bufsize.small as a size
- REGTESTS: silence the "log format ignored" warnings
- REGTESTS: silence warning "previous 'http-response' action is final"
- REGTESTS: make the unit explicit for very short timeouts
- REGTESTS: silence warnings about content-type being ignored
- REGTESTS: remove a duplicate "option httpslog" in the defaults section
- REGTESTS: silence warning "L6 sample fetches ignored" in cond_set_var
- REGTESTS: add missing timeouts to 30 tests
- REGTESTS: only use tune.ssl.default-dh-param when not using AWS-LC
- REGTESTS: enable -dW on almost all tests to fail on warnings
- MEDIUM: config: warn on unitless timeouts < 100 ms
- MINOR: tools: make parse_size_err() support 32/64 bits
- MINOR: ring: support unit suffixes in the size
- MINOR: cfgparse-global: parse options to allow non std keywords in discovery mode
- BUG/MINOR: mworker-prog: don't warn about deprecated section with expose-deprecated-directives
- MINOR: cli: make "show env" accessible via master CLI without enabling debug
- MINOR: config: show HAPROXY_BRANCH in "show env" output
- MINOR: http-ana: Add option to keep query-string on a localtion-based redirect
- MINOR: http-ana: Add support for "set-cookie-fmt" option to redirect rules
- MINOR: agent-check: Be able to set absolute weight via an agent
- MINOR: stream: Add an option to "show sess" command to dump the captured URI
- DOC: config: A a space before ':' for {bs,fs}.aborted and {bs,fs}.rst_code
- DOC: config: Fix a typo in "1.3.1. The Request line"
- MINOR: http: Add support for HTTP 414/431 status codes
- DEV: phash: Update 414 and 431 status codes to phash
- MINIR: mux-h1: Return 414 or 431 when appropriate
- BUG/MINOR: http_ana: Report -1 for %Tr for invalid response only
- DOC: config: Slightly improve the %Tr documentation
- DOC: config: Move wait_end in section about internal samples
- DOC: config: Move fs.* and bs.* in section about L5 samples
- MINOR: stats-file: add the filename in the warning
- MEDIUM: stats-file: explicitely ignore comments starting by //
- DOC: quic: rename max-window-size as with default prefix
- MINOR: mux-quic: add missing values for show flags
- MINOR: quic: simplify qc_prep_pkts() exit path
- MINOR: quic: support a max number of built packet per send iteration
- MINOR: quic: extend qc_send_mux() return type with a dedicated enum
- MINOR: quic: define quic_pacing module
- MINOR: quic/pacing: implement quic_pacer engine
- MINOR: quic/pacing: support pacing emission on quic_conn layer
- MINOR: quic/pacing: add burst support
- MINOR: mux-quic: define a tx STREAM frame list member
- MINOR: mux-quic: encapsulate QCC tasklet wakeup
- MAJOR: mux-quic: support pacing emission
- MINOR: quic: use dynamic cc_algo on bind_conf
- MINOR: quic: extend quic-cc-algo optional parameters
- MEDIUM: quic: define cubic-pacing congestion algorithm
- MINOR: mux_quic/pacing: display pacing info on show quic
- MEDIUM: stats-file: silently ignore be/fe mistmatch
- REGTESTS: use -dW by default on every reg-tests
- DOC: lua: fix yield-dependent methods expected contexts
- DOC: sched: add missing scheduler API documentation for tasklet_wakeup_after()
- DOC: sched: document the missing TASK_F_UEVT* flags
- CLEANUP: tinfo: move sched_*_date/*_mono_time to the thread-local area
- MINOR: stream: don't update s->lat_time when the wakeup date is not set
- MINOR: tinfo/clock: turn sched_call_date to 64-bits
- MINOR: sched: add TASK_F_WANTS_TIME to make the scheduler update the call date
- MINOR: tools: add new macro DEFZERO to provide a default zero argument
- MINOR: tasklet: make the low-level tasklet API take a flag
- MINOR: tasklet: support an optional set of wakeup flags to tasklet_wakeup_on()
- DOC: configuration: explain the rules regarding spaces in arguments
- DOC: configuration: explain quotes and spaces in conditional blocks
- DOC: configuration: wrap long line for "strstr()" conditional expression
- BUG/MINOR: http-ana: Adjust the server status before the L7 retries
- MINOR: http-fetch: Add an option to 'query" to get the QS with the '?'
- BUG/MINOR: cfgparse-quic: fix renaming of max-window-size
- MEDIUM: mworker: remove USE_SYSTEMD requirement for -Ws
- CI: vtest: temporarily build from the sd-notify PR
- MINOR: systemd: replace SOCK_CLOEXEC by fcntl call to FD_CLOEXEC
- BUILD: makefile: make ERR apply to build options as well
- MINOR: startup: set HAPROXY_LOCALPEER only once
- DOC: configuration: update "Environment variables" chapter
- DOC: config: indent the list of environment variables
- OPTION: map/hlua: make core.set_map() lookup more efficient
- REGTESTS: switch to -Ws for master-worker reg-tests
- REGTESTS: disable temporarly mworker test on OSX
- MINOR: quic: Add the congestion window initial value to QUIC path
- MINOR: window_filter: Implement windowed filter (only max)
- MINOR: quic: implement delivery rate sampling algorithm
- MINOR: quic: implement BBR congestion control algorithm for QUIC
- MINOR: quic: quic_cc modifications to support BBR
- MINOR: quic: quic_loss modifications to support BBR
- MINOR: quic: RX part modifications to support BBR
- MINOR: quic: TX part modifications to support BBR.
- MINOR: quic: add "bbr" new "quic-cc-algo" option
- BUG/MEDIUM: mux-h2: Increase max number of headers when encoding HEADERS frames
- BUG/MEDIUM: mux-h2: Check the number of headers in HEADERS frame after decoding
- BUG/MEDIUM: h3: Properly limit the number of headers received
- BUG/MEDIUM: h3: Increase max number of headers when sending headers
- DOC: config: Improve documentation of tune.http.maxhdr directive
- DOC: management: Clearly state "show errors" only reports malformed H1 messages
- BUILD: makefile: build flags.c before haproxy to speed up the build
- BUILD: makefile: reorder object files by build time
- MINOR: config: Improve warnings on misplaced rules by adding an optional arg
- CLEANUP: cfgparse: Add direction in functions name that warn on misplaced rules
- MINOR: cfgparse: Emit a warning for misplaced "tcp-response content" rules
- BUG/MINOR: cfgparse-quic: fix bbr initialization
- MINOR: cfgparse-quic: activate pacing only via burst argument
- MINOR: quic: Useless rate sample member initialization
- BUG/MINOR: cfgparse-quic: fix warning for cc-aglo with 0 burst
- MINOR: quic: support pacing for newreno and nocc
- BUG/MINOR: quic: Missing application limitations tracking for BBR
- MINOR: cfgparse-global: add cfg_parse_global_chroot
- MINOR: cfgparse-global: add more checks for "chroot" argument
- BUG/MINOR: startup: fix UAF when set the default for log_tag
- MINOR: capabilities: rename program_name argument to progname
- MINOR: startup: use global progname variable
- MINOR: cfgparse-global: add cfg_parse_global_localpeer
- BUG/MINOR: config: allow to check HAPROXY_LOCALPEER in config
- BUG/MINOR: startup: init_early: remove obsolete comment
- BUG/MEDIUM: debug: don't set the STUCK flag from debug_handler()
- BUG/MEDIUM: wdt: fix the stuck detection for warnings
- BUG/MINOR: activity/memprofile: reinitialize the free calls on DSO summary
- MINOR: activity/memprofile: offer a function to unregister stale info
- BUG/MEDIUM: pools/memprofile: always clean stale pool info on pool_destroy()
- MINOR: activity: better report nil than ffff in unknown callers
- CLEANUP: activity: better use a mask to tests freeing methods
- MINOR: activity/memprofile: also monitor strdup() activity
- MINOR: activity/memprofile: monitor non-portable calls as well
- MINOR: activity: interrupt the show profile dump more often
- MINOR: tools: resolve main() only once in resolve_sym_name()
- MINOR: tools: add a new function "resolve_dso_name" to find a symbol's DSO
- MINOR: activity/memprofile: use resolve_dso_name() for the DSO summary
- REGTESTS: relax strerror matching to avoid a failure on libmusl
- REGTESTS: don't rely on the base64 utility when openssl base64 is already used
This fixes the commit d6ccd1738b
("MINOR: startup: set HAPROXY_LOCALPEER only once"). HAPROXY_LOCALPEER could
be checked in the configuration to set some servers settings or listeners. So,
we need to set it just before we read the configuration at the second time.
Let's mark HAPROXY_LOCALPEER as "usable" in the configuration in the related
documentation chapter.
This should not be backported, as related to the latest master-worker
refactoring.
Recently, pacing support was added for cubic congestion algorithm. This
was activated by using the new token "cubic-pacing" on quic-cc-algo.
Furthermore, it was possible to define a burst size with a new
parameters after congestion token between parenthesis.
This configuration is not oblivious to users. In particular, it can
cause to easily forgot to tweak burst size, which can dramatically
impact performance.
Simplify this by removing the extra "-pacing" suffix. Now, pacing will
be activated solely based on the burst parameter. If 0, burst is
considered as infinite and no pacing will be used. Pacing will be
activating for any positive burst. This better reflects the link between
pacing and burst and its importance.
Note that for the moment, if burst is specified, it will be ignored with
a warning for algorithm outside of cubic.
This is not a breaking change as pacing support was implemented in the
current dev version.
For now, only the H1 multiplexer is able to capture malformed messages. So
it is better to update the management guide accordingly to avoid any
confusion.
The description was inproved to clrealy mentionned it is applied on received
requests and responses. In addition, a comment was added about HTTP/2 and
HTTP/3 limitation when messages are encoded to be sent.
Add this new "bbr" option to the list of the congestion control algorithms which
may be set by "quic-cc-algo" setting.
This new algorithm is considered as experimental and may be enabled only if
"expose-experimental-directive" is set.
Also update the documentation for this new setting.
In the doc our lists are indented but for any reason this one was not,
making it harder to visually delimit. Let's just indent it. No need to
backport this, it's totally cosmetic and would need adaptations since
it was recently touched.
There are some variables, which are set by HAProxy process (HAPROXY_*). Some
of them are handy to check or to redefine in the configuration, in order to
create conditional blocks and make the configuration more flexible. But it
wasn't clear in the documentation, which variables are really safe and usefull
to redefine and which ones could be only read via "show env" output.
Latest changes in master-worker architecture makes the existed description even
more confusing.
So let's sort all HAPROXY_* variables to four categories and let's also mark
explicitly, which ones are set in which process, when haproxy is started in
master-worker mode.
In addition, update examples in chapter "2.4. Conditional blocks". This might
bring more ideas for users how HAPROXY_* variables could be used in the
conditional blocks.
Since sd_notify() is now implemented in src/systemd.c, there is no need
anymore to build its support conditionnally with USE_SYSTEMD.
This patch add supports for -Ws for every build and removes the
USE_SYSTEMD build option. It also remove every reference to USE_SYSTEMD
in the documentation and the CI.
This also allows to run the reg-tests in -Ws with the new VTest support.
As mentionned by Thayne McCombs in #2728, it could be handy to have a sample
fetch function to retrieve the query string with the question mark
character.
Indeed, for now, "query" sample fetch function already extract the query
string from the path, but the question mark character is not
included. Instead of adding a new sample fetch function with a too similar
name, an optional argument is added to "query". If "with_qm" is passed as
argument, the question mark will be included in the query string, but only
if it is not empty.
Thanks to this patch, the following rule:
http-request redirect location /destination?%[query] if { -m found query } some_condition
http-request redirect location /destination if some_condition
can now be expressed this way:
http-request redirect location /destination%[query(with_qm)] if some_condition
Conditional blocks inherit the same tokenizer and argument parser as
the rest of the configuration, but are also silently concatenated
around groups of spaces and tabs. This can lead to subtle failures
for configs containing spaces around commas and parenthesis, where
a string comparison might silently fail for example. Let's better
document this particular case.
Thanks to Valentine for analysing and reporting the problem.
This can be backported to 2.4.
Spaces around commas or parenthesis in expressions are generally part
of the value due to the long history of supporting unquoted arguments.
But this tends to come as a surprise to new users and sometimes creates
subtly invalid configurations. Let's add some text covering this.
This can be backported to 2.4.
tasklet_wakeup_on() and its derivates (tasklet_wakeup_after() and
tasklet_wakeup()) do not support passing a wakeup cause like
task_wakeup(). This is essentially due to an API limitation cause by
the fact that for a very long time the only reason for waking up was
to process pending I/O. But with the growing complexity of mux tasks,
it is becoming important to be able to skip certain heavy processing
when not strictly needed.
One possibility is to permit the caller of tasklet_wakeup() to pass
flags like task_wakeup(). Instead of going with a complex naming scheme,
let's simply make the flags optional and be zero when not specified. This
means that tasklet_wakeup_on() now takes either 2 or 3 args, and that the
third one is the optional flags to be passed to the callee. Eligible flags
are essentially the non-persistent ones (TASK_F_UEVT* and TASK_WOKEN_*)
which are cleared when the tasklet is executed. This way the handler
will find them in its <state> argument and will be able to distinguish
various causes for the call.
These are user-defined one-shot events that are application-specific
and reset upon wakeup and were not documented. No backport is needed
since these were added to 3.1.
Contrary to what the doc states, it is not expected (nor relevant) to
use yield-dependent methods such as core.yield() or core.(m)sleep() from
contexts that don't support yielding. Such contexts include body, init,
fetches and converters.
Thus the doc got it wrong since the beginning, because such methods were
never supported from the above contexts, yet it was listed in the list
of compatible contexts (probably the result of a copy-paste), which is
error-prone because it could either cause a Lua runtime error to be
thrown, or be ignored in some other cases.
It should be backported to all stable versions.
Define a new QUIC congestion algorithm token 'cubic-pacing' for
quic-cc-algo bind keyword. This is identical to default cubic
implementation, except that pacing is used for STREAM frames emission.
This algorithm supports an extra argument to specify a burst size. This
is stored into a new bind_conf member named quic_pacing_burst which can
be reuse to initialize quic path.
Pacing support is still considered experimental. As such, 'cubic-pacing'
can only be used with expose-experimental-directives set.
Modify quic-cc-algo for better extensability of optional parameters
parsing. This will be useful to support a new parameter for maximum
allowed pacing burst size.
Take this opportunity to refine quic-cc-algo documentation. Optional
parameters are now presented as a list which would be soon extended.
Rename 'tune.quic.frontend.max-window-size' with the prefix 'default-'.
This highlights the fact that it is not a hard limit, as it can be
overriden if specifying an optional window size via quic-cc-algo on a
bind line.
No need to backport as this keyword was added on the current dev
version.
414-Uri-Too-Long and 431-Request-Header-Fields-Too-Large are now part of
supported status codes that can be define as error files. The hash table
defined in http_get_status_idx() was updated accordingly.
"show sess" command now supports a list of options that can be set after all
other possible arguments (<id>, all...). For now, "show-uri" is the only
supported option. With this options, the captured URI, if non-null, is added
to the dump of a stream, complete or now. The URI may be anonymized if
necessary.
This patch should fix the issue #663.
Historically, an agent-check program is only able to set a proportial weight
to the initial server's weight. However, it could be handy to also set an
absolute value. It is the purpose of this patch.
Instead of changing the current way to set a server's weight, a new
agent-check command is introduced. The string "weight:", followed by an
positive interger or a positive interger percentage, can now be used. If the
value ends with the '%' sign, then the new weight will be proportional to
the initially weight of the server. Otherwise, the value is considered as an
absolute weight and must be between 0 and 256.
This patch should fix the issue #360.
It is now possible to use a log-format string to define the "Set-Cookie"
header value of a response generated by a redirect rule. There is no special
check on the result format and it is not possible during the configuration
parsing. It is proably not a big deal because already existing "set-cookie"
and "clear-cookie" options don't perform any check.
Here is an example:
http-request redirect location https://someurl.com/ set-cookie haproxy="%[var(txn.var)]"
This patch should fix the issue #1784.
On prefix-based redirect, there is an option to drop the query-string of the
location. Here it is the opposite. an option is added to preserve the
query-string of the original URI for a localtion-based redirect.
By setting "keep-query" option, for a location-based redirect only, the
query-string of the original URI is appended to the location. If there is no
query-string, nothing is added (no empty '?'). If there is already a
non-empty query-string on the localtion, the original one is appended with
'&' separator.
This patch should fix issue #2728.
Till now this value was parsed as raw integer using atol() and would
silently ignore any trailing suffix, causing unexpected behaviors when
set, e.g. to "4k". Let's make use of parse_size_err() on it so that
units are supported. This requires to turn it to uint as well, which
was verified to be OK.
Till now this value was parsed as raw integer using atol() and would
silently ignore any trailing suffix, preventing from starting when set
e.g. to "64k". Let's make use of parse_size_err() on it so that units are
supported. This requires to turn it to uint as well, and to explicitly
limit its range to INT_MAX - 2*sizeof(void*), which was previously
partially handled as part of the sign check.
Till now this value was parsed as raw integer using atol() and would
silently ignore any trailing suffix, causing unexpected behaviors when
set, e.g. to "512k". Let's make use of parse_size_err() on it so that
units are supported. This requires to turn it to uint as well, and
since it's sometimes compared to an int, we limit its range to
0..INT_MAX.
Till now this value was parsed as raw integer using atol() and would
silently ignore any trailing suffix, causing unexpected behaviors when
set, e.g. to "512k". Let's make use of parse_size_err() on it so that
units are supported. This requires to turn it to uint as well, which
was verified to be OK.
Till now these values were parsed as raw integer using atol() and would
silently ignore any trailing suffix, causing unexpected behaviors when
set, e.g. to "512k". Let's make use of parse_size_err() on them so that
units are supported. This requires to turn them to uint as well, which
is OK.
Till now these values were parsed as raw integer using atol() and would
silently ignore any trailing suffix, causing unexpected behaviors when
set, e.g. to "512k". Let's make use of parse_size_err() on them so that
units are supported. This requires to turn them to uint as well, which
is OK.
Sometimes conditions to decide of an anomaly are not as easy to define
as just an error or a success. One example use case would be to monitor
the transfer time and fix a threshold.
An idea suggested by Tristan would be to make permit the "when"
converter to refer to a more variable or dynamic condition.
Here we make this possible by making "when" rely on a named ACL. The
ACL then needs to be specified in either the proxy or the defaults
section. Since it is evaluated inline, it may even refer to information
available at the end (at log time) such as the data transfer time. If
the ACL evalutates to true, the converter passes the data.
Example: log "dbg={-}" when fine, or "dbg={... debug info ...}" on slow
transfers:
acl slow_xfer res.timer.data ge 10000 # more than 10s is slow
log-format "$HAPROXY_HTTP_LOG_FMT \
fsdbg={%[fs.debug_str,when(acl,slow_xfer)]} \
bsdbg={%[bs.debug_str,when(acl,slow_xfer)]}"
Released version 3.1-dev13 with the following main changes :
- MEDIUM: mworker: depreciate the 'program' section
- BUILD: ot: use a cebtree instead of a list for variable names
- MINOR: startup: replace HAPROXY_LOAD_SUCCESS with global load_status
- BUG/MINOR: startup: set HAPROXY_CFGFILES in read_cfg
- BUG/MINOR: cli: don't show sockpairs in HAPROXY_CLI and HAPROXY_MASTER_CLI
- BUG/MEDIUM: stconn: Don't forward shut for SC in connecting state
- BUG/MEDIUM: resolvers: Insert a non-executed resulution in front of the wait list
- MINOR: debug: explicitly permit the counter condition to be empty
- MINOR: debug: add a new counter type for glitches
- MINOR: mux-h2: count glitches when they're reported
- BUG/MINOR: deinit: release uri_auth admin rules
- MINOR: uri_auth: add stats_uri_auth_free helper
- MEDIUM: uri_auth: implement clean uri_auth cleaning
- MINOR: mux-quic/h3: count glitches when they're reported
- BUG/MEDIUM: mux-h2: Don't send RST_STREAM frame for streams with no ID
- BUG/MINOR: Don't report early srv aborts on request forwarding in DONE state
- MINOR: promex: Expose the global node and description in process metrics
- MINOR: promex: Add global and proxies description as labels to all metrics
- OPTIM: pattern: only apply LRU cache for large enough lists
- BUG/MEDIUM: checks: make sure to always apply offsets to now_ms in expiration
- BUG/MINOR: debug: do not set task expiration to TICK_ETERNITY
- BUG/MEDIUM: mailers: make sure to always apply offsets to now_ms in expiration
- BUG/MINOR: mux_quic: make sure to always apply offsets to now_ms in expiration
- BUG/MINOR: peers: make sure to always apply offsets to now_ms in expiration
- BUG/MEDIUM: clock: make sure now_ms cannot be TICK_ETERNITY
- MINOR: debug/cli: replace "debug dev counters" with "debug counters"
- DOC: config: add tune.h2.{be,fe}.rxbuf to the global keywords index
- MINOR: chunk: add a BUG_ON upon the next init_trash_buffer()
"debug dev" commands are not meant to be used by end-users, and are
purposely not documented. Yet due to their usefulness in troubleshooting
sessions, users are increasingly invited by developers to use some of
them.
"debug dev counters" is one of them. Better move it to "debug counters"
and document it so that users can check them even if the output can look
cryptic at times. This, combined with DEBUG_GLITCHES, can be convenient
to observe suspcious activity. The doc however precises that the format
may change between versions and that new entries/types might appear
within a stable branch.
The program section is unreliable and should not be used, more reliable
alternatives exist outside HAProxy. Let's depreciate the section so we
could remove it completely in 3.3.
Released version 3.1-dev12 with the following main changes :
- MINOR: startup: tune.renice.{startup,runtime} allow to change priorities
- BUG/MEDIUM: promex: Fix dump of extra counters
- BUILD: import/mt_list: support building with TCC
- BUILD: compiler: define __builtin_prefetch() for tcc
- CLEANUP: quic: Remove the useless directive "tune.quic.backend.max-idle-timeou"
- DOC: config: document connection error 44 (reverse connect failure)
- CLEANUP: connection: properly name the CO_ER_SSL_FATAL enum entry
- DEBUG: cli: support closing "hard" using close() in addition to fd_delete()
- MINOR: connection: add more connection error codes to cover common errno
- MINOR: rawsock: set connection error codes when returning from recv/send/splice
- MINOR: connection: add new sample fetch functions fc_err_name and bc_err_name
- MINOR: quic: Help diagnosing malformed probing packets
- BUG/MINOR: quic: fix malformed probing packet building
- MINOR: listener: Remove useless checks on the receiver protocol existence
- MINOR: http-conv: Remove unreachable goto statement in sample_conv_q_preferred
- MINOR: http: don't %-encode the payload when not relevant
- MINOR: quic: simplify qc_parse_pkt_frms() return path
- MINOR: quic: use dynamically allocated frame on parsing
- MINOR: quic: extend return value of CRYPTO parsing
- BUG/MINOR: quic: repeat packet parsing to deal with fragmented CRYPTO
- BUG/MINOR: mworker: do 'program' postparser checks in read_cfg_in_discovery_mode
- EXAMPLES: add "traces.cfg" with traces examples
- BUG/MEDIUM: quic: do not consider ACK on released stream as error
- CLEANUP: stats: fix misleading comment on top of stat_idx_info
- MINOR: wdt: move the local timers to a struct
- MINOR: debug: add a function to dump a stuck thread
- DEBUG: wdt: better detect apparently locked up threads and warn about them
- DEBUG: cli: make it possible for "debug dev loop" to trigger warnings
- DEBUG: wdt: make the blocked traffic warning delay configurable
- DEBUG: wdt: add a stats counter "BlockedTrafficWarnings" in show info
- DEBUG: wdt: set the default blocked task delay to 100 ms
- MINOR: debug: move the "recover now" warn message after the optional notes
- MINOR: event_hdl: add event_hdl_sub_list_empty() helper func
- MINOR: pattern: add _pat_ref_new() helper func
- OPTIM: pattern: use malloc() to initialize new pat_ref struct
- MINOR: pattern: add pat_ref_free() helper func
- CLEANUP: guid: remove global tree export
- BUG/MINOR: guid/server: ensure thread-safety on GUID insert/delete
- DOC: management: explain the change of behavior of the program section
- BUG/MEDIUM: mux-h2: try to wait for the peer to read the GOAWAY
- BUG/MEDIUM: quic: prevent crash due to CRYPTO parsing error
The warn-blocked-traffic-after can be significantly lowered. In any
case, in order to be usable it must be well below the limit to have a
chance to emit exploitable traces before the watchdog finally fires.
Even configured at 1ms it looks very difficult to trigger it on a
laptop doing SSL and compression, so applying a 100-fold factor to
cover for large configs and small machines sounds sane for 3.1. In any
case, even at 100ms, the service degradation becomes quite visible.
These functions return a symbolic error code such as ECONNRESET to keep
logs compact while making them human-readable. It's a good alternative
to the numeric code in that it's more expressive, and a good one to the
full message since it's shorter and more precise (some codes even match
errno names).
The doc was updated so that the symbolic names appear in the table. It
could be useful to backport this feature to help with troubleshooting
some issues, though backporting the doc might possibly be more annoying
in case users have local patches already, so maybe the table update does
not need to be backported in this case.
While we get reports of connection setup errors in fc_err/bc_err, we
don't have the equivalent for the recv/send/splice syscalls. Let's
add provisions for new codes that cover the common errno values that
recv/send/splice can return, i.e. ECONNREFUSED, ENOMEM, EBADF, EFAULT,
EINVAL, ENOTCONN, ENOTSOCK, ENOBUFS, EPIPE. We also add a special case
for when the poller reported the error itself. It's worth noting that
EBADF/EFAULT/EINVAL will generally indicate serious bugs in the code
and should not be reported.
The only thing is that it's quite hard to forcefully (and reliably)
trigger these errors in automated tests as the timing is critical.
Using iptables to manually reset established connections in the
middle of large transfers at least permits to see some ECONNRESET
and/or EPIPE, but the other ones are harder to trigger.
This commit introduces the tune.renice.startup and tune.renice.runtime
global keywords that allows to change the priority with setpriority().
tune.renice.startup is parsed and applied in the worker or the standalone
process for configuration parsing. If this keyword is used alone, the
nice value is changed to the previous one after configuration parsing.
tune.renice.runtime is applied after configuration parsing, so in the
worker or a standalone process. Combined with tune.renice.startup it
allows to have a different nice value during configuration parsing and
during runtime.
The feature was discussed in github issue #1919.
Example:
global
tune.renice.startup 15
tune.renice.runtime 0
Released version 3.1-dev11 with the following main changes :
- BUG/MINOR: httpclient: return NULL when no proxy available during httpclient_new()
- BUG/MEDIUM: mworker/httpclient: initialization skipped by accident in mworker mode
- BUG/MINOR: resolvers/mworker: missing default resolvers in mworker mode
- MINOR: mworker/ocsp: skip ocsp-update proxy init in master
- BUG/MEDIUM: stconn: Wait iobuf is empty to shut SE down during a check send
- MINOR: mux-h1: Show the SD iobuf in trace messages on stream send events
- MINOR: mux-h1: Add a trace on shutdown when keep-alive is not possible
- BUG/MINOR: http-ana: Don't report a server abort if response payload is invalid
- BUG/MEDIUM: stconn: Check FF data of SC to perform a shutdown in sc_notify()
- BUG/MAJOR: filters/htx: Add a flag to state the payload is altered by a filter
- REGTESTS: Never reuse server connection in http-messaging/truncated.vtc
- BUG/MINOR: quic: avoid leaking post handshake frames
- MINOR: quic: send new tokens (NEW_TOKEN) even for 1RTT sessions
- BUG/MEDIUM: quic: avoid freezing 0RTT connections
- DOC: config: fix rfc7239 forwarded typo in desc
- MINOR: http_ext: implement rfc7239_{nn,np} converters
- CLEANUP: http_ext: remove useless BUG_ON() in http_handle_xot_header()
- BUG/MINOR: sample: free err2 in smp_resolve_args for type ARGT_REG
- MINOR: arg: add an argument type for identifier
- BUILD: buffers: keep b_getblk_nc() and b_peek_varint() in buf.h
- CLEANUP: buffers: simplify b_get_varint()
- OPTIM: buffers: avoid a useless wrapping check for ofs == 0
- MINOR: debug: make mark_tainted() return the previous value
- MINOR: chunk: drop the global thread_dump_buffer
- MINOR: debug: split ha_thread_dump() in two parts
- MINOR: debug: slightly change the thread_dump_pointer signification
- MINOR: debug: make ha_thread_dump_done() take the pointer to be used
- MINOR: debug: replace ha_thread_dump() with its two components
- MEDIUM: debug: on panic, make the target thread automatically allocate its buf
- BUILD: mux-h2/traces: fix build on 32-bit due to size of the DATA frame
- CI: prepare Coverity build for Ubuntu 24
- CI: bump development builds explicitely to Ubuntu 24.04
- CI: modernize macos builds to macos-15
- BUG/MINOR: mworker: fix mworker-max-reloads parser
- MINOR: mux-quic: simplify sending of empty STREAM FIN
- BUG/MINOR: mux-quic: do not close STREAM with empty FIN if no data sent
- CLEANUP: debug: make the BUG_ON() macros check the condition in the outer one
- MEDIUM: debug: add match counters for BUG_ON/WARN_ON/CHECK_IF
- MINOR: debug: add a new debug macro COUNT_IF()
- MINOR: debug: add "debug dev counters" to list code counters
- BUG/MEDIUM: stats-html: Never dump more data than expected during 0-copy FF
- BUG/MEDIUM: mux-h2: Remove H2S from send list if data are sent via 0-copy FF
- BUG/MINOR: stconn: Pretend the SE have more data to deliver on abortonclose
- CLEANUP: stream: remove outdated comments
- DEBUG: stream: Add debug counters to track some client/server aborts
- DEBUG: mux-h1: Add debug counters to track some errors
- MINOR: mux-h1: Add support of the debug string for logs
- MINOR: stream: maintain per-stream counters of the number of passes on code
- MINOR: filters: add per-filter call counters
- MINOR: sample: add the "when" converter to condition some expressions
- BUG/MEDIUM: connection/http-reuse: fix address collision on unhandled address families
- BUILD: spoe: fix build warning on older gcc around sub-struct initialization
- Revert "OPTIM: mux-h2: make h2_send() report more accurate wake up conditions"
- DEBUG: mux-h1: Add debug counters to track errors with in/out pending data
- BUG/MINOR: mux-h1: Fix conditions on pipe in some COUNT_IF()
- MINOR: activity/memprofile: show per-DSO stats
- BUG/MINOR: mworker/cli: show master startup logs in recovery mode
- MINOR: mworker: stop MASTER proxy listener on worker mcli sockpair
- MINOR: error: simplify startup_logs_init_shm
- BUG/MINOR: mworker: show worker warnings in startup logs
- CLEANUP: mworker: clean mworker_reexec
- MINOR: mworker/cli: split mworker_cli_proxy_create
- BUG/MINOR: server: fix dynamic server leak with check on failed init
- BUG/MEDIUM: server: fix race on servers_list during server deletion
- BUG/MEDIUM: stconn: Report blocked send if sends are blocked by an error
- BUG/MINOR: http-ana: Fix wrong client abort reports during responses forwarding
- BUG/MINOR: stconn: Don't disable 0-copy FF if EOS was reported on consumer side
- MINOR: mworker/cli: add 'debug' to 'show proc'
- MINOR: mworker/cli: remove comment line for program when useless
- MINOR: mworker/cli: 'show proc debug' for old workers
- BUILD: debug: silence a build warning with threads disabled
- CLEANUP: mux-h2: remove the unused "full" variable in h2_frt_transfer_data()
- MINOR: pools: export the pools variable
- MINOR: debug: place a magic pattern at the beginning of post_mortem
- MINOR: debug: place the post_mortem struct in its own section.
- MINOR: debug: store important pointers in post_mortem
- MINOR: debug: do not limit backtraces to stuck threads
- MINOR: cli: remove non-printable characters from 'debug dev fd'
- MINOR: cli: add an 'echo' command
- MINOR: debug: also add a pointer to struct global to post_mortem
- CLEANUP: mworker: make mworker_create_master_cli more readable
- BUG/MEIDUM: mworker: fix fd leak from master to worker
- BUG/MINOR: mworker/cli: fix mworker_cli_global_proxy_new_listener
- MINOR: tools: add strnlen2() helper
- CLEANUP: log: use strnlen2() in _lf_text_len() to compute string length
- DOC: design: add notes about more detailed error reporting for logs
- MINOR: debug: also add fdtab and acitvity to struct post_mortem
- MINOR: debug: remove the redundant process.thread_info array from post_mortem
- DEV: gdb: add a number of gdb scripts to navigate in core dumps
- BUG/MINOR: trace: stop rewriting argv with -dt
- MEDIUM: protocol: make abns a custom unix socket address family
- MEDIUM: protocol: rely on AF_CUST_ABNS family to recognize ABNS sockets
- CLEANUP: tools: rely on address family to detect ABNS sockets
- MINOR: protocol: create abnsz socket address family
- MINOR: sock: restore effective UNIX family in sock_get_old_sockets()
- MEDIUM: sock: also restore effective unix family in get_{src,dst}()
- MEDIUM: sock_unix: use per-family addrcmp function
- MEDIUM: socket: add zero-terminated ABNS alternative
- BUG/MINOR: ssl/cli: 'set ssl cert' does not check the transaction name correctly
- BUG/MINOR: mworker: mworker_reexec: unset MODE_STARTING before free startup logs ring
- BUG/MINOR: errors: startup_logs_free: set global startup_logs ptr to NULL
- BUG/MINOR: errors: print_message: don't allocate startup logs ring
- BUG/MINOR: startup: don't fork worker if started with -c -W
- BUG/MINOR: startup: dump libs only in worker if started with -W -dL
- BUG/MINOR: startup: dump keywords only in worker if started with -W -dKAll
- BUG/MINOR: startup: don't dump polling info for master in verbose mode
- CI: switch QUIC Interop on AWS-LC to common docker image
- CI: switch QUIC Interop on LibreSSL to common docker image
- CI: enable chacha20 test on LibreSSL QUIC Interop
- DOC: config: add missing glitch_{cnt,rate} data types
- DOC: config: add missing glitch_{cnt,rate} sample definitions
- CI: LibreSSL QUIC Interop: fix docker context
- DEBUG: mux-h1: Add H1C expiration dates in trace messages
- BUG/MEDIUM: mux-h1: Fix how timeouts are applied on H1 connections
- BUG/MINOR: http-ana: Report internal error if an action yields on a final eval
- MINOR: stream: Save last evaluated rule on invalid yield
- MINOR: quic: complete trace in qc_may_build_pkt()
- MINOR: quic: move qc_send_mux() prototype into quic_tx.h
- MINOR: stream: Replace last_rule_file/line fields by a more generic field
- MINOR: stream: Save the last filter evaluated interrupting the processing
- MINOR: stream: Save the entity waiting to continue its processing
- MINOR: stream: Use an enum to identify last and waiting entities for streams
- MINOR: stream: Add http-buffer-request option in the waiting entities
- DOC: config: Add documentation about last_entity sample fetch
- DOC: config: Add documentation about waiting_entity sample fetch
Following previous commit, when glitch_cnt and glitch_rate data types were
implemented in c9c6b683f ("MEDIUM: stick-tables: add a new stored type for
glitch_cnt and glitch_rate"), newly exposed samples such as
table_glitch_cnt(), table_glitch_rate, src_glitch_cnt() and
src_glitch_rate() were documented but their definitions was missing in
supported keywords list.
It should be backported in 3.0 with c9c6b683f
When glitch_cnt and glitch_rate data types were implemented in
c9c6b683f ("MEDIUM: stick-tables: add a new stored type for glitch_cnt and
glitch_rate"), the data types list for "stick-table" keyword documentation
was overlooked.
This was reported by Nick Ramirez.
It should be backported in 3.0 with c9c6b683f.
When an abstract unix socket is bound by HAProxy (using "abns@" prefix),
NUL bytes are appended at the end of its path until sun_path is filled
(for a total of 108 characters).
Here we add an alternative to pass only the non-NUL length of that path
to connect/bind calls, such that the effective path of the socket's name
is as humanly written. This may be useful to interconnect with existing
softwares that implement abstract sockets with this logic instead of the
default haproxy one.
This is achieved by implementing the "abnsz" socket prefix (instead of
"abns"), which stands for "zero-terminated ABNS". "abnsz" prefix may be
used anywhere "abns" is. Internally, haproxy uses the custom socket
family (AF_CUST_ABNS vs AF_CUST_ABNSZ) to differentiate default abns
sockets from zero-terminated ones.
Documentation was updated and regtest was added.
Fixes GH issues #977 and #2479
Co-authored-by: Aurelien DARRAGON <adarragon@haproxy.com>
These are the notes of a day long code analysis session (CFA+WTA)
aimed at figuring what's missing during most code troubleshooting
sessions. The goal is to provide good indications about what rules/
filters were still active when the processing ended (timeout, error
etc), what subscribers are still active (indicating waiting for an
event), and what shut/abort events were met at the various levels
of each side's stack, in each direction.
Sometimes it would be desirable to include some debugging output only
under certain conditions, but the end of the transfer is too late to
apply some rules.
Here we take the approach of making a converter ("when") that takes a
condition among an arbitrary list, and decides whether or not to let
the input sample pass through or not based on the condition. This
allows for example to log debugging information only when an error
was encountered during the processing (sort of an extension of
dontlog-normal). The conditions are quite limited (stopping, error,
normal, toapplet, forwarded, processed) and can be negated. The
converter can also be chained to use more complex conditions.
A suggested example will be:
# log "dbg={-}" when fine, or "dbg={... debug info ...}" on error:
log-format "$HAPROXY_HTTP_LOG_FMT dbg={%[bs.debug_str,when(!normal)]}"
"option forwarded" provides a convenient way to automatically insert
rfc7239 forwarded header to requests sent to servers.
On the other hand, manually crafting the header is quite complicated due
to specific formatting rules that must be followed as per rfc7239.
However, sometimes it may be necessary to craft the header manually, for
instance if it has to be conditional or based on parameters that "option
forwarded" doesn't provide. To ease this task, in this patch we implement
rfc7239_nn and rfc7239_np which are respectively meant to craft nodename:
nodeport values, specifically intended to manually build rfc7239 'for'
and 'by' header fields while ensuring rfc7239 compliancy.
Example:
# build RFC-compliant 7239 header:
http-request set-var-fmt(txn.forwarded) "for=\"%[ipv6(::1),rfc7239_nn]:%[str(8888),rfc7239_np]\";host=\"haproxy.org\";proto=http"
# check RFC-compliancy:
http-request set-var(txn.test) "var(txn.forwarded),debug(ok,stderr),rfc7239_is_valid,debug(ok,stderr)"
# stderr output:
# [debug] ok: type=str <for="[::1]:_8888";host="haproxy.org";proto=http>
# [debug] ok: type=bool <1>
See documentation for more info and examples.
Released version 3.1-dev10 with the following main changes :
- BUG/MAJOR: mux-quic: do not crash on empty STREAM frame emission
- BUG/MINOR: stats: Fix the name for the total number of streams created
- MINOR: quic: strengthen qc_release_frm()
- MEDIUM: quic: decount acknowledged data for MUX txbuf window
- MINOR: quic: implement dedicated type for out-of-order stream ACK
- MEDIUM: quic: merge contiguous/overlapping buffered ack stream range
- MEDIUM: quic: decount out-of-order ACK data range for MUX txbuf window
- MINOR: log: add do_log() logging helper
- MINOR: log: add do_log_parse_act() helper func
- MINOR: action: add do-log action
- REGTESTS: add some tests for 'do-log' action
- BUG/MEDIUM: hlua: make hlua_ctx_renew() safe
- BUG/MEDIUM: hlua: properly handle sample func errors in hlua_run_sample_{fetch,conv}()
- BUG/MINOR: quic: fix discarding of already stored out-of-order ACK
- BUG/MEDIUM: quic: properly decount out-of-order ACK on stream release
- MINOR: ssl: disable server side default CRL check with WolfSSL
- MEDIUM: sink: implement sink_find_early()
- MINOR: trace: postresolve sink names
- MINOR: sample: postresolve sink names in debug() converter
- BUG/MEDIUM: mux-quic: ensure timeout server is active for short requests
- MINOR: cfgparse: simulate long configuration parsing with force-cfg-parser-pause
- BUILD: cache: silence an uninitialized warning at -Og with gcc-12.2
- BUG/MINOR: mux-h2/traces: present the correct buffer for trailers errors traces
- MINOR: mux-h2/traces: print the size of the DATA frames
- CLEANUP: muxes: remove useless inclusion of ebmbtree.h
- REORG: buffers: move some of the heavy functions from buf.h to buf.c
- MINOR: buffer: add a buffer list type with functions
- MINOR: mux-h2: split the amount of rx data from the amount to ack
- MINOR: mux-h2: create and initialize an rx offset per stream
- MEDIUM: mux-h2: start to update stream when sending WU
- MEDIUM: mux-h2: start to introduce the window size in the offset calculation
- MINOR: mux-h2: count within a connection, how many streams are receiving data
- MINOR: mux-h2: allocate the array of shared rx bufs in the h2c
- MINOR: mux-h2: add rxbuf head/tail/count management for h2s
- MINOR: mux-h2: move H2_CF_WAIT_IN_LIST flag away from the demux flags
- MINOR: mux-h2: simplify the exit code in h2_rcv_buf()
- MINOR: mux-h2: simplify the wake up code in h2_rcv_buf()
- MINOR: mux-h2: clear up H2_CF_DEM_DFULL and H2_CF_DEM_SHORT_READ ambiguity
- MAJOR: mux-h2: make streams use the connection's buffers
- MAJOR: mux-h2: permit a stream to allocate as many buffers as desired
- MAJOR: mux-h2: make the rxbuf allocation algorithm a bit smarter
- MINOR: mux-h2: add tune.h2.be.rxbuf and tune.h2.fe.rxbuf global settings
- MEDIUM: mux-h2: change the default initial window to 16kB
- DOC: design-thoughts: add diagrams illustrating an rx win groth
- MEDIUM: mux-h2: rework h2_restart_reading() to differentiate recv and demux
- OPTIM: mux-h2: make h2_send() report more accurate wake up conditions
- OPTIM: mux-h2: try to continue reading after demuxing when useful
- OPTIM: mux-h2: use tasklet_wakeup_after() in h2s_notify_recv()
- MINOR: mux-h2/traces: add missing flags and proxy ID in traces
- MINOR: mux-h2/traces: add buffer-related info to h2s and h2c
- CI: cirrus-ci: bump FreeBSD image to 14-1
- REGTESTS: fix a reload race in abns_socket.vtc
- MINOR: activity/memprofile: always return "other" bin on NULL return address
- MINOR: quic: notify connection layer on handshake completion
- BUG/MINOR: stream: unblock stream on wait-for-handshake completion
- BUG/MEDIUM: quic: support wait-for-handshake
- BUG/MEDIUM: server: server stuck in maintenance after FQDN change
- BUG/MEDIUM: queue: make sure never to queue when there's no more served conns
- DEBUG: mux-h2/flags: add H2_CF_DEM_RXBUF & H2_SF_EXPECT_RXDATA for the decoder
- REGTESTS: cli: add delay 0.1 before connect to cli
- MINOR: startup: add O_CLOEXEC flag to open /dev/null
- MEDIUM: startup: move daemonization fork in init
- MINOR: startup: refactor "daemonization" fork
- MEDIUM: startup: move PID handling in init()
- MAJOR: mworker: move master-worker fork in init()
- BUG/MINOR: mworker: fix memory leak due to master-worker fork
- REORG: mworker: set nbthread=1 for master after fork
- MINOR: init: check MODE_MWORKER before creating master CLI
- REORG: mworker: move mworker_create_master_cli in master 'case'
- MEDIUM: startup: call chroot() if needed in one place
- MEDIUM: startup: do set_identity() if needed in one place
- MINOR: startup: only worker gets capabilities from bin
- CLEANUP: haproxy: rm no longer used mworker_reexec_waitmode
- MINOR: startup: rename exit_on_waitmode_failure to exit_on_failure
- MINOR: defaults: update MASTER_MAXCONN description
- MEDIUM: startup: remove MODE_MWORKER_WAIT
- MINOR: global: add MODE_DISCOVERY flag
- MEDIUM: cfgparse: add KWF_DISCOVERY keyword flag
- MEDIUM: cfgparse: call some parsers only in MODE_DISCOVERY
- MEDIUM: cfgparse-global: parse only KWF_DISCOVERY keywords in MODE_DISCOVERY
- MEDIUM: cfgparse: parse only "global" section in MODE_DISCOVERY
- MEDIUM: startup: introduce load_cfg and read_cfg
- MINOR: cfgparse: fix *thread keywords sensitive to global section position
- MINOR: mworker/cli: rename mworker_cli_proxy_new_listener
- MINOR: mworker/cli: rename and clean mworker_cli_sockpair_new
- MINOR: mworker/cli: create master CLI sockpair before fork
- MINOR: mworker/cli: create MASTER proxy before mcli listeners
- MINOR: mworker: add and set state PROC_O_INIT for new worker
- MEDIUM: mworker/cli: close child and parent fds, setup listeners
- MINOR: mworker: mworker_catch_sigchld: use fd_delete instead of close
- MINOR: startup: rename and adapt reexec_on_failure
- MINOR: mworker: add support for case when new worker dies
- MINOR: mworker: simplify the code that sets PROC_O_LEAVING
- MINOR: mworker/cli: add _send_status to support state transition
- MEDIUM: startup: split sending oldpids_sig logic for standalone and mworker modes
- MINOR: startup: split init() into separate initialization routines
- MINOR: startup: split main: add step_init_3
- MINOR: startup: simplify check for calling sock_get_old_sockets
- MINOR: startup: encapsulate sock_get_old_sockets in a function
- MINOR: startup: add bind_listeners
- MINOR: startup: split main: add step_init_4
- MINOR: startup: encapsulate master's code in run_master
- MINOR: startup: add read_cfg_in_discovery_mode
- MINOR: mworker: adapt exit_on_failure for master recovery mode
- MEDIUM: mworker: add support of master recovery mode
- MINOR: startup: add set_verbosity
- MEDIUM: mworker: block reloads
- MINOR: mworker: slow load status delivery if worker is starting
- MINOR: mworker: readapt program support in mworker_catch_sigchld
- MINOR: mworker: deserialize process list before read_cfg_in_discovery_mode
- MINOR: mworker: parse program only in MODE_DISCOVERY
- MINOR: cfgparse: add support for program section
- MINOR: startup: reintroduce program support
- MINOR: mworker-prog: stop old programs in mworker_ext_launch_all
- MINOR: mworker: reintroduce systemd support
- MINOR: mworker: report explicitly when worker exits due to max reloads
- MINOR: cfgparse-global: parse *env keywords in MODE_DISCOVERY
- MINOR: startup: reintroduce *env keywords support
- MINOR: startup: close devnullfd, when daemon mode is applied
Let's just see on a diagram how the receiver can detect that the
window is large enough for the remote sender to fill the link. Here
it seems that a first criterion is that data are accumulating in
the rxbuf, indicating that the next hop doesn't consume them fast
enough. On the diagram it's visible when blue arrows (incoming data)
are more frequent than the magenta ones on average (outgoing data),
which happens when silence moments are less frequent and don't allow
the reader to catch up. It's also visible that there are two phases
alternating in the transfer:
- measure round trip time (i.e. how long it takes to restart
sending after a WU was sent after a long silence)
- measure the lowest rxbuf size during the previous round trip
It's worth noting that a window size change only has *observable* effect
after two RTT: the first RTT is to restart sending (opening or enlarging
the window), the second RTT to measure the lowest rxbuf size over the
period.
By turning the advertised window into an offset and comparing it to
the received quantity, it's possible to measure the RTT of the whole
chain (including the client possibly producing the data). Note that
when multiple streams compete for BW this can become tricky. Limiting
the window to available buffers and counting the number of sending
streams on a connection could work (i.e. split total buffers into
1+#senders, first one being used for tx).
Now that we're using all available rx buffers for transfers, there's
no point anymore in advertising more than the minimum value we can
safely buffer. Let's be conservative and only rely on the dynamic
buffers to improve speed beyond the configured value, and make sure
than many streams will no longer cause unfairness.
Interestingly, the total number of wakeups has further shrunk down, but
with a different distribution. From 128k for 1000 1M transfers, it went
down to 119k, with 96k from restart_reading, 10k from done_ff and 2.6k
from snd_buf. done_ff went up by 30% and restart_reading went down by
30%.
These settings allow to change the total buffer size allocated to the
backend and frontend respectively. This way it's no longer necessary to
play with tune.bufsize nor increase the number of streams to benefit from
more buffers.
Setting tune.h2.fe.rxbuf to 4m to match a sender's max tcp_wmem resulted
in 257 Mbps for a single stream at 103ms vs 121 Mbps default (or 5.1 Mbps
with a single buffer and 64kB window).
The buffer ring is problematic in multiple aspects, one of which being
that it is only usable by one entity. With multiplexed protocols, we need
to have shared buffers used by many entities (streams and connection),
and the only way to use the buffer ring model in this case is to have
each entity store its own array, and keep a shared counter on allocated
entries. But even with the default 32 buf and 100 streams per HTTP/2
connection, we're speaking about 32*101*32 bytes = 103424 bytes per H2
connection, just to store up to 32 shared buffers, spread randomly in
these tables. Some users might want to achieve much higher than default
rates over high speed links (e.g. 30-50 MB/s at 100ms), which is 3 to 5
MB storage per connection, hence 180 to 300 buffers. There it starts to
cost a lot, up to 1 MB per connection, just to store buffer indexes.
Instead this patch introduces a variant which we call a buffer list.
That's basically just a free list encoded in an array. Each cell
contains a buffer structure, a next index, and a few flags. The index
could be reduced to 16 bits if needed, in order to make room for a new
struct member. The design permits initializing a whole freelist at once
using memset(0).
The list pointer is stored at a single location (e.g. the connection)
and all users (the streams) will just have indexes referencing their
first and last assigned entries (head and tail). This means that with
a single table we can now have all our buffers shared between multiple
streams, irrelevant to the number of potential streams which would want
to use them. Now the 180 to 300 entries array only costs 7.2 to 12 kB,
or 80 times less.
Two large functions (bl_deinit() & bl_get()) were implemented in buf.c.
A basic doc was added to explain how it works.
This command is pausing the configuration parser for <timeout>
milliseconds. This is useful for development or for testing timeouts of
init scripts, particularly to simulate a very long reload. It requires
the expose-experimental-directives to be set.
A previous known limitation about traces was that parsing was performed on
the fly, meaning that when using "sink" keyword, only sinks that were
either internal or previously defined in the config could be used. Indeed,
it was not possible to use a ring section defined AFTER the traces section
when using the 'sink' keyword from traces.
This limitation was also mentioned in the config file.
Let's get rid of that limitation by implementing proper postparsing for
the sink parameter in traces section. To do this, make use of the new
sink_find_early() helper to start referencing sink by their names even
if they don't exist yet (if they are about to be defined later in the
config)
Traces commands on the cli are not concerned by this change.
Thanks to the two previous commits, we can now expose the do-log action
on all available action contexts, including the new quic-init context.
Each context is responsible for exposing the do-log action by registering
the relevant log steps, saving the idendifier, and then store it in the
rule's context so that do_log_action() automatically uses it to produce
the log during runtime.
To use the feature, it is simply needed to use "do-log" (without argument)
on an action directive, example:
tcp-request connection do-log
As mentioned before, each context where the action is exposed has its own
log step identifier. Currently known identifiers are:
quic-initial: quic-init
tcp-request connection: tcp-req-conn
tcp-request session: tcp-req-sess
tcp-request content: tcp-req-cont
tcp-response content: tcp-res-cont
http-request: http-req
http-response: http-res
http-after-response: http-after-res
Thus, these "additional" logging steps can be used as-is under log-profile
section (after "on" keyword). However, although the parser will accept
them, it makes no sense to use them with the "log-steps" proxy keyword,
since the only path for these origins to trigger a log generation is
through the explicit use of "do-log" action.
This need was described in GH #401, it should help to conditionally
trigger logs using ACL at specific key points.. and may either be used
alone or combined with "log-steps" to add additional log "trackers" during
transaction handling.
Documentation was updated and some examples were added.
Released version 3.1-dev9 with the following main changes :
- MINOR: tools: add minimal file name management
- CLEANUP: stick-table: make the file location point to a global file name
- MINOR: proxy: use the global file names for conf->file
- CLEANUP: cfgparse: factor proxy vs log-forward collisions
- BUG/MINOR: cfgparse: detect another uncaught case of duplicate defaults
- MINOR: proxy: add a list of orphaned defaults sections
- MEDIUM: cfgparse: drop duplicate named defaults sections after use
- OPTIM: cfgparse: speed up duplicate server detection
- MEDIUM: cfgparse: warn about deprecated use of duplicate server names
- BUG/MINOR: server: shut down streams under thread isolation
- BUG/MINOR: proxy: also make the cli and resolvers use the global name
- REGTESTS: log: fix log-profile.vtc
- MEDIUM: mailers: warn about deprecated legacy mailers
- BUG/MEDIUM: cli: Be sure to catch immediate client abort
- DEV: flags/applet: decode appctx flags
- BUG/MEDIUM: cli: Deadlock when setting frontend maxconn
- MINOR: log: fix indent in strm_log()
- MINOR: log: introduce extra log profile steps
- MINOR: log: handle extra log origins in _process_send_log_override()
- MINOR: log: introduce log_orig flags
- MINOR: log: explicitly handle extra log origins as error when relevant
- MINOR: log: support extra log origins for '%OG' alias
- MINOR: proxy: add log_steps struct member
- MINOR: log: introduce "log-steps" proxy keyword
- MINOR: log: add log_orig_proxy() helper function
- MEDIUM: log: consider log-steps proxy setting for existing log origins
- DOC: config: document proxy "log-steps" keyword
- REGTESTS: add a test for proxy "log-steps"
- Revert "BUG/MINOR: server: shut down streams under thread isolation"
- MINOR: task: define two new one-shot events for use with WOKEN_OTHER or MSG
- BUG/MEDIUM: stream: make stream_shutdown() async-safe
- BUG/MINOR: server: make sure the HMAINT state is part of MAINT
- BUG/MINOR: queue: make sure that maintenance redispatches server queue
- MINOR: server: make srv_shutdown_sessions() call pendconn_redistribute()
- BUILD: tools: only include execinfo.h for the real backtrace() function
- MINOR: tools: do not attempt to use backtrace() on linux without glibc
- OPTIM: channel: speed up co_getline()'s search of the end of line
- OPTIM: stconn: Don't pretend mux have more data to deliver on EOI/EOS/ERROR
- BUG/MINOR: mcli: Pretend the mux have more data to deliver between two commands
- MINOR: action: Export release_expr_int_action() release function
- MINOR: stream: Rely on a per-stream max connection retries value
- MINOR: stream: Support dynamic changes of the number of connection retries
- MINOR: stream/stats: Expose the current number of streams in stats
- MINOR: stream/stats: Expose the total number of streams ever created in stats
- BUG/MINOR: cfgparse-global: fix allowed args number for setenv
- MINOR: cfgparse-global: add dedicated parser for *env keywords
- MINOR: mux-quic: complete Tx infos for QCS dump
- MINOR: quic: ensure txbuf realloc is only performed on empty buffer
- MINOR: mux-quic: strengthen qcs_send_metadata() usage
- MINOR: quic: remove unneeded notification of txbuf room
- MINOR: quic: refactor MUX send notification
- MEDIUM: quic: strengthen MUX send notification
- MINOR: quic: refactor STREAM room notification
- MINOR: quic: do not remove qc_stream_desc automatically on ACK handling
- MINOR: quic: store streambuf in a streamdesc tree
- MINOR: quic: move buffered ACK to streambuf
- MEDIUM: quic: handle out-of-order ACK at streamdesc layer
- MEDIUM: quic: refactor buffered STREAM ACK consuming
- BUG/MEDIUM: queue: always dequeue the backend when redistributing the last server
- MINOR: config/trace: Add a 'traces' section to declare debug traces
- MINOR: trace: Be able to chain commands for a source in one line
- MINOR: tcpcheck: Add support for an option host header value for httpchk option
- BUG/MINOR: mux-h1: Fix condition to set EOI on SE during zero-copy forwarding
- MINOR: mux-h1: Use a dedicated function to conditionnaly set EOI flag on SE
- BUG/MINOR: http-ana: Disable fast-fwd for unfinished req waiting for upgrade
- BUG/MINOR: mux-quic: fix crash on qcc_init() early return
- BUG/MINOR: quic: fix trace on releasing STREAM frame after ack
Support for headers and body hidden in the version for the "option httpchk"
directive was removed. However a Host header is mandatory for HTTP/1.1
requests and some servers may return an error if it is not set. For now, to
add it, an "http-check send" rule must be added. But it is not really handy
to use an extra config line for this purpose.
So now, it is possible to set the host header value, a log-format string, as
extra argument to "option httpchk" directive. It must be the fourth argument:
option httpchk GET / HTTP/1.1 www.srv.com
While this patch is not a bug fix, it is simple enough to be backported if
necessary. On 2.9 and older, lf_init_expr() does not exist and LIST_INIT() must
be used instead.
In the configuration file or on the CLI, configuring traces for a specific
source is a bit painful because this must be done in several lines. Thanks
to this patch, it is now possible to fully configure traces for a source in
one line. For instance, the following on the CLI:
trace h1 sink stderr; trace h1 level developer; trace h1 verbosity complete; trace h1 start now
can now be replaced by:
trace h1 sink stderr level developer verbosity complete start now
The same is true for the 'trace' directives in the configuration file.
It is no longer supported to declare debug traces, via 'trace' directive, in
a global section. A 'traces' directive must be used instead. The syntax of
the 'trace' directive in these sections remains the same. But it is no
longer experimental.
The main reason for this change is to avoid to have a ring section defined
before a global one. Indeed, for now, forward declarations of ring sections
are not supported. So to configure traces, you had to add a ring section
before the global one defining the traces. Most of time, that meant to have
two global sections :
global
[...] # global settings
ring <name>
[...]
global
[...] # trace config
In addition, it will be possible to easily extend the traces section by
adding some new directives.
Thanks to the previous patch, it is now possible to add an action to
dynamically change the maxumum number of connection retires for a stream.
"set-retries" action may now be used to do so, from a "tcp-request content"
or a "http-request" rule. This action accepts an expression or an integer
between 0 and 100. The integer value is checked during the configuration
parsing and leads to an error if it is not in the expected range. However,
for the expression, the value is retrieve at runtime. So, invalid value are
just ignored.
Too high value is forbidden to avoid any trouble. 100 retries seems already
be an amazingly hight value. In addition, the option is only available on
backend or listen sections.
Because the max retries is limited to 100 at most, it can be stored as a
unsigned short. This save some space in the stream structure.
As mentioned in 2.8 announce on the mailing list [1] and on the wiki [2],
use of legacy mailers is now deprecated and will not be supported anymore
starting with version 3.3. Use of Lua script (AKA Lua mailers) is now
encouraged (and fully supported since 2.8) for this purpose, as it offers
more flexibility (e.g: alerts can be customized) and is more future-proof.
Configurations relying on legacy mailers will now raise a warning.
Users willing to keep their existing mailers config in a working state
should simply add the following line to their global section:
# mailers.lua file as provided in the git repository
# adjust path as needed
lua-load examples/lua/mailers.lua
[1]: https://www.mail-archive.com/haproxy@formilux.org/msg43600.html
[2]: https://github.com/haproxy/wiki/wiki/Breaking-changes
Released version 3.1-dev8 with the following main changes :
- DOC: configuration: place the HAPROXY_HTTP_LOG_FMT example on the correct line
- MINOR: mux-h1: Set EOI on SE during demux when both side are in DONE state
- BUG/MEDIUM: mux-h1/mux-h2: Reject upgrades with payload on H2 side only
- REGTESTS: h1/h2: Update script testing H1/H2 protocol upgrades
- BUG/MEDIUM: clock: detect and cover jumps during execution
- BUG/MINOR: pattern: prevent const sample from being tampered in pat_match_beg()
- BUG/MEDIUM: pattern: prevent uninitialized reads in pat_match_{str,beg}
- BUG/MEDIUM: pattern: prevent UAF on reused pattern expr
- MEDIUM: ssl/cli: "dump ssl cert" allow to dump a certificate in PEM format
- BUG/MAJOR: mux-h1: Wake SC to perform 0-copy forwarding in CLOSING state
- BUG/MINOR: h1-htx: Don't flag response as bodyless when a tunnel is established
- REGTESTS: fix random failures with wrong_ip_port_logging.vtc under load
- BUG/MINOR: pattern: do not leave a leading comma on "set" error messages
- REGTESTS: shorten a bit the delay for the h1/h2 upgrade test
- MINOR: server: allow init-state for dynamic servers
- DOC: server: document what to check for when adding new server keywords
- MEDIUM: h1: Accept invalid T-E values with accept-invalid-http-response option
- BUG/MINOR: polling: fix time reporting when using busy polling
- BUG/MINOR: clock: make time jump corrections a bit more accurate
- BUG/MINOR: clock: validate that now_offset still applies to the current date
- BUG/MEDIUM: queue: implement a flag to check for the dequeuing
- OPTIM: sample: don't check casts for samples of same type
- OPTIM: vars: remove the unneeded lock in vars_prune_*
- OPTIM: vars: inline vars_prune() to avoid many calls
- MINOR: vars: remove the emptiness tests in callers before pruning
- IMPORT: import cebtree (compact elastic binary trees)
- OPTIM: vars: use a cebtree instead of a list for variable names
- OPTIM: vars: use multiple name heads in the vars struct
- BUG/MINOR: peers: local entries updates may not be advertised after resync
- DOC: config: Explicitly list relaxing rules for accept-invalid-http-* options
- MINOR: proxy: Rename accept-invalid-http-* options
- DOC: configuration: Remove dangerous directives from the proxy matrix
- BUG/MEDIUM: sc_strm/applet: Wake applet after a successfull synchronous send
- BUG/MEDIUM: cache/stats: Wait to have the request before sending the response
- BUG/MEDIUM: promex: Wait to have the request before sending the response
- MINOR: clock: test all clock_gettime() return values
- MEDIUM: clock: collect the monotonic time in clock_local_update_date()
- MEDIUM: clock: opportunistically use CLOCK_MONOTONIC for the internal time
- MEDIUM: clock: use the monotonic clock for idle time calculation
- MEDIUM: clock: don't compute before_poll when using monotonic clock
- BUG/MINOR: fix missing "log-format overrides previous 'option tcplog clf'..." detection
- BUG/MINOR: fix missing "'option httpslog' overrides previous 'option tcplog clf'..." detection
- BUG/MINOR: cfgparse-listen: fix option httpslog override warning message
- BUG/MINOR: cfgparse: detect incorrect overlap of same backend names
- MEDIUM: cfgparse: warn about proxies having the same names
- DOC: management: add init-state to add server keywords
- BUG/MINOR: mux-quic: report glitches to session
- BUILD: cebtree: silence a bogus gcc warning on impossible code paths
- MEDIUM: cfgparse: warn about colliding names between defaults and proxies
- MEDIUM: cfgparse: detect collisions between defaults and log-forward
For now, that only concerns accept-invalid-http-{request/response} and
accept-unsafe-violations-in-http-{request/response}. But the idea is to make
dangerous directives hard to find. It is one more way to discourage anyone
to use it. And, optionnaly, it is also handy because it keeps the matrix
aligned on 80 columns.
With these options, it is possible to accept some invalid messages that may
considered as unsafe and may result as vulnerabilities. The naming is not
explicit enough on this point. These option must really be considered as
dangerous and only used as a temporary workaround. Unfortunately, when used,
it is probably because there are some legacy and unsupported applications in
place. Nevermind. The documentation warns about the use of these
options. Now the name of the options itself is a warning.
So now, "accept-invalid-http-request" and "accept-invalid-http-response"
options are deprecated and replaced by
"accept-unsafe-violations-in-http-request" and
"accept-unsafe-violations-in-http-response" options.
Time to time, new exceptions are added in the HTTP parsing (most of time H1)
to not reject some invalid messages sent by legacy applications. But the
documentation of accept-invalid-http-request and
accept-invalid-http-response options is not pretty clear. So, now, there is
an explicit list of relaxing rules for both options.
Commit 50322df introduced the init-state keyword, but it didn't enable
it for dynamic servers. However, this feature is perfectly desirable
for virtual servers too, where someone would like a server inlived
through "set server be1/srv1 state ready" to be put out of maintenance
in down state until the next health check succeeds.
At reading the code, it seems that it's only a matter of allowing this
keyword for dynamic servers, as current code path calls
srv_adm_set_ready() which incidentally triggers a call to
_srv_update_status_adm().
The new "dump ssl cert" CLI command allows to dump a certificate stored
into HAProxy memory. Until now it was only possible to dump the
description of the certificate using "show ssl cert", but with this new
command you can dump the PEM content on the filesystem.
This command is only available on a admin stats socket.
$ echo "@1 dump ssl cert cert.pem" | socat /tmp/master.sock -
-----BEGIN PRIVATE KEY-----
[...]
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
[...]
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
[...]
-----END CERTIFICATE-----
When HAPROXY_HTTP_LOG_FMT was added by commit 537b9e7f36 ("MINOR: config:
add environment variables for default log format"), the example was placed
by accident after the clf log format instead of the HTTP log format,
causing a bit of confusion.
This can be backported to 2.8.
Released version 3.1-dev7 with the following main changes :
- MINOR: config: Created env variables for http and tcp clf formats
- MINOR: mux-quic: add buf_in_flight to QCC debug infos
- MINOR: mux-quic: correct qcc_bufwnd_full() documentation
- MINOR: tools: add helpers to backup/clean/restore env
- MINOR: mworker: restore initial env before wait mode
- BUG/MINOR: haproxy: free init_env in deinit only if allocated
- BUILD: tools: environ is not defined in OS X and BSD
- DEV: coccinelle: add a test to detect unchecked malloc()
- DEV: coccinelle: add a test to detect unchecked calloc()
- CI: QUIC Interop AWS-LC: enable ngtcp2 client
- CI: fix missing comma introduced in 956839c0f6
- CI: QUIC Interop: do not run bandwidth measurement tests
- CI: QUIC Interop: use different artifact names for uploading logs
- BUILD: quic: 32bits build broken by wrong integer conversions for printf()
- CLEANUP: ssl: cleanup the clienthello capture
- MEDIUM: ssl: capture the supported_versions extension from Client Hello
- MEDIUM: ssl/sample: add ssl_fc_supported_versions_bin sample fetch
- MEDIUM: ssl: capture the signature_algorithms extension from Client Hello
- MEDIUM: ssl/sample: add ssl_fc_sigalgs_bin sample fetch
- MINOR: proxy: Add support of 429-Too-Many-Requests in retry-on status
- BUG/MEDIUM: mux-h2: Set ES flag when necessary on 0-copy data forwarding
- BUG/MEDIUM: stream: Prevent mux upgrades if client connection is no longer ready
- BUG/MINIR: proxy: Match on 429 status when trying to perform a L7 retry
- CLEANUP: haproxy: fix typos in code comment
- CLEANUP: mqtt: fix typo in MQTT_REMAINING_LENGHT_MAX_SIZE
- MINOR: tools: Implement ipaddrcpy().
- MINOR: quic: Implement quic_tls_derive_token_secret().
- MINOR: quic: Token for future connections implementation.
- BUG/MINOR: quic: Missing incrementation in NEW_TOKEN frame builder
- MINOR: quic: Modify NEW_TOKEN frame structure (qf_new_token struct)
- MINOR: quic: Implement qc_ssl_eary_data_accepted().
- MINOR: quic: Add trace for QUIC_EV_CONN_IO_CB event.
- BUG/MEDIUM: quic: always validate sender address on 0-RTT
- BUILD: quic: fix build errors on FreeBSD since recent GSO changes
- MINOR: tools: extend str2sa_range to add an alt parameter
- MINOR: server: add a alt_proto field for server
- MEDIUM: sock: use protocol when creating socket
- MEDIUM: protocol: add MPTCP per address support
- BUG/MINOR: quic: Crash from trace dumping SSL eary data status (AWS-LC)
- MEDIUM: stick-table: Add support of a factor for IN/OUT bytes rates
- MEDIUM: bwlim: Use a read-lock on the sticky session to apply a shared limit
- BUG/MEDIUM: mux-pt: Never fully close the connection on shutdown
- BUG/MEDIUM: cli: Always release back endpoint between two commands on the mcli
- BUG/MINOR: quic: unexploited retransmission cases for Initial pktns.
- BUG/MEDIUM: mux-h1: Properly handle empty message when an error is triggered
- MINOR: mux-h2: try to clear DEM_MROOM and MUX_MFULL at more places
- BUG/MAJOR: mux-h2: always clear MUX_MFULL and DEM_MROOM when clearing the mbuf
- BUG/MINOR: mux-spop: always clear MUX_MFULL and DEM_MROOM when clearing the mbuf
- BUG/MINOR: Crash on O-RTT RX packet after dropping Initial pktns
- BUG/MEDIUM: mux-pt: Fix condition to perform a shutdown for writes in mux_pt_shut()
- CLEANUP: assorted typo fixes in the code and comments
- DEV: patchbot: count the number of backported/non-backported patches
- DEV: patchbot: add direct links to show only specific categories
- DEV: patchbot: detect commit IDs starting with 7 chars
- BUG/MEDIUM: clock: also update the date offset on time jumps
- MEDIUM: server: add init-state
Allow the user to set the "initial state" of a server.
Context:
Servers are always set in an UP status by default. In
some cases, further checks are required to determine if the server is
ready to receive client traffic.
This introduces the "init-state {up|down}" configuration parameter to
the server.
- when set to 'fully-up', the server is considered immediately available
and can turn to the DOWN sate when ALL health checks fail.
- when set to 'up' (the default), the server is considered immediately
available and will initiate a health check that can turn it to the DOWN
state immediately if it fails.
- when set to 'down', the server initially is considered unavailable and
will initiate a health check that can turn it to the UP state immediately
if it succeeds.
- when set to 'fully-down', the server is initially considered unavailable
and can turn to the UP state when ALL health checks succeed.
The server's init-state is considered when the HAProxy instance
is (re)started, a new server is detected (for example via service
discovery / DNS resolution), a server exits maintenance, etc.
Link: https://github.com/haproxy/haproxy/issues/51
Add a factor parameter to stick-tables, called "brates-factor", that is
applied to in/out bytes rates to work around the 32-bits limit of the
frequency counters. Thanks to this factor, it is possible to have bytes
rates beyond the 4GB. Instead of counting each bytes, we count blocks
of bytes. Among other things, it will be useful for the bwlim filter, to be
able to configure shared limit exceeding the 4GB/s.
For now, this parameter must be in the range ]0-1024].
Multipath TCP (MPTCP), standardized in RFC8684 [1], is a TCP extension
that enables a TCP connection to use different paths.
Multipath TCP has been used for several use cases. On smartphones, MPTCP
enables seamless handovers between cellular and Wi-Fi networks while
preserving established connections. This use-case is what pushed Apple
to use MPTCP since 2013 in multiple applications [2]. On dual-stack
hosts, Multipath TCP enables the TCP connection to automatically use the
best performing path, either IPv4 or IPv6. If one path fails, MPTCP
automatically uses the other path.
To benefit from MPTCP, both the client and the server have to support
it. Multipath TCP is a backward-compatible TCP extension that is enabled
by default on recent Linux distributions (Debian, Ubuntu, Redhat, ...).
Multipath TCP is included in the Linux kernel since version 5.6 [3]. To
use it on Linux, an application must explicitly enable it when creating
the socket. No need to change anything else in the application.
This attached patch adds MPTCP per address support, to be used with:
mptcp{,4,6}@<address>[:port1[-port2]]
MPTCP v4 and v6 protocols have been added: they are mainly a copy of the
TCP ones, with small differences: names, proto, and receivers lists.
These protocols are stored in __protocol_by_family, as an alternative to
TCP, similar to what has been done with QUIC. By doing that, the size of
__protocol_by_family has not been increased, and it behaves like TCP.
MPTCP is both supported for the frontend and backend sides.
Also added an example of configuration using mptcp along with a backend
allowing to experiment with it.
Note that this is a re-implementation of Bjrn's work from 3 years ago
[4], when haproxy's internals were probably less ready to deal with
this, causing his work to be left pending for a while.
Currently, the TCP_MAXSEG socket option doesn't seem to be supported
with MPTCP [5]. This results in a warning when trying to set the MSS of
sockets in proto_tcp:tcp_bind_listener.
This can be resolved by adding two new variables:
sock_inet(6)_mptcp_maxseg_default that will hold the default
value of the TCP_MAXSEG option. Note that for the moment, this
will always be -1 as the option isn't supported. However, in the
future, when the support for this option will be added, it should
contain the correct value for the MSS, allowing to correctly
set the TCP_MAXSEG option.
Link: https://www.rfc-editor.org/rfc/rfc8684.html [1]
Link: https://www.tessares.net/apples-mptcp-story-so-far/ [2]
Link: https://www.mptcp.dev [3]
Link: https://github.com/haproxy/haproxy/issues/1028 [4]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/515 [5]
Co-authored-by: Dorian Craps <dorian.craps@student.vinci.be>
Co-authored-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
The "429" status can now be specified on retry-on directives. PR_RE_* flags
were updated to remains sorted.
This patch should fix the issue #2687. It is quite simple so it may safely
be backported to 3.0 if necessary.
Released version 3.1-dev6 with the following main changes :
- BUG/MINOR: proto_tcp: delete fd from fdtab if listen() fails
- BUG/MINOR: proto_tcp: keep error msg if listen() fails
- MINOR: proto_tcp: tcp_bind_listener: copy errno in errmsg
- MINOR: channel: implement ci_insert() function
- BUG/MEDIUM: mworker/cli: fix pipelined modes on master CLI
- REGTESTS: mcli: test the pipelined commands on master CLI
- MINOR: cfgparse: load_cfg_in_mem: fix null ptr dereference reported by coverity
- MINOR: startup: fix unused value reported by coverity
- BUG/MINOR: mux-quic: do not send too big MAX_STREAMS ID
- BUG/MINOR: proto_uxst: delete fd from fdtab if listen() fails
- BUG/MINOR: cfgparse: parse_cfg: fix null ptr dereference reported by coverity
- MINOR: proto_uxst: copy errno in errmsg for syscalls
- MINOR: mux-quic: do not trace error in qcc_send_frames() on empty list
- BUG/MINOR: h3: properly reject too long header responses
- CLEANUP: mworker/cli: clean up the mode handling
- BUG/MINOR: tools: make fgets_from_mem() stop at the end of the input
- BUG/MINOR: pattern: pat_ref_set: fix UAF reported by coverity
- BUG/MINOR: pattern: pat_ref_set: return 0 if err was found
- CI: keep logs for failed QIUC Interop jobs
- BUG/MINOR: release-estimator: fix relative scheme in CHANGELOG URL
- MINOR: release-estimator: add requirements.txt
- MINOR: release-estimator: add installation steps in README.md
- MINOR: release-estimator: fix the shebang of the python script
- DOC: config: correct the table for option tcplog
- MEDIUM: log: relax some checks and emit diag warnings instead in lf_expr_postcheck()
- MINOR: log: "drop" support for log-profile steps
- CI: QUIC Interop LibreSSL: document chacha20 test status
- CI: modernize codespell action, switch to node 16
- CI: QUIC Interop AWS-LC: enable chrome client
- DOC: lua: fix incorrect english in lua.txt
- MINOR: Implements new log format of option tcplog clf
- MINOR: cfgparse: limit file size loaded via /dev/stdin
- BUG/MINOR: stats: fix color of input elements in dark mode
- CLEANUP: stats: use modern DOCTYPE tag
- BUG/MINOR: stats: add lang attribute to html tag
- DOC: quic: fix default minimal value for max window size
- DOC: quic: document nocc debug congestion algorithm
- MINOR: quic: extract config window-size parsing
- MINOR: quic: define max-window-size config setting
- MINOR: quic: allocate stream txbuf via qc_stream_desc API
- MINOR: mux-quic: account stream txbuf in QCC
- MEDIUM: mux-quic: implement API to ignore txbuf limit for some streams
- MINOR: h3: mark control stream as metadata
- MINOR: mux-quic: define buf_in_flight
- MAJOR: mux-quic: allocate Tx buffers based on congestion window
- MINOR: quic/config: adapt settings to new conn buffer limit
- MINOR: quic: define sbuf pool
- MINOR: quic: support sbuf allocation in quic_stream
- MEDIUM: h3: allocate small buffers for headers frames
- MINOR: mux-quic: retry after small buf alloc failure
- BUG/MINOR: cfgparse-global: fix err msg in mworker keyword parser
- BUG/MINOR: cfgparse-global: clean common_kw_list
- BUG/MINOR: cfgparse-global: remove redundant goto
- MINOR: cfgparse-global: move 'pidfile' in global keywords list
- MINOR: cfgparse-global: move 'expose-*' in global keywords list
- MINOR: cfgparse-global: move tune options in global keywords list
- MINOR: cfgparse-global: move unsupported keywords in global list
- BUG/MINOR: cfgparse-global: remove tune.fast-forward from common_kw_list
- MINOR: quic: store the lost packets counter in the quic_cc_event element
- MINOR: quic: support a tolerance for spurious losses
- MINOR: protocol: properly assign the sock_domain and sock_family
- MINOR: protocol: add a family lookup
- MEDIUM: socket: always properly use the sock_domain for requested families
- MINOR: protocol: add the real address family to the protocol
- MINOR: socket: don't ban all custom families from reuseport
- MINOR: protocol: always initialize the receivers list on registration
- CLEANUP: protocol: no longer initialize .receivers nor .nb_receivers
Tests performed between a 1 Gbps connected server and a 100 mbps client,
distant by 95ms showed that:
- we need 1.1 MB in flight to fill the link
- rare but inevitable losses are sufficient to make cubic's window
collapse fast and long to recover
- a 100 MB object takes 69s to download
- tolerance for 1 loss between two ACKs suffices to shrink the download
time to 20-22s
- 2 losses go to 17-20s
- 4 losses reach 14-17s
At 100 concurrent connections that fill the server's link:
- 0 loss tolerance shows 2-3% losses
- 1 loss tolerance shows 3-5% losses
- 2 loss tolerance shows 10-13% losses
- 4 loss tolerance shows 23-29% losses
As such while there can be a significant gain sometimes in setting this
tolerance above zero, it can also significantly waste bandwidth by sending
far more than can be received. While it's probably not a solution to real
world problems, it repeatedly proved to be a very effective troubleshooting
tool helping to figure different root causes of low transfer speeds. In
spirit it is comparable to the no-cc congestion algorithm, i.e. it must
not be used except for experimentation.
Define a new buffer pool reserved to allocate smaller memory area. For
the moment, its usage will be restricted to QUIC, as such it is declared
in quic_stream module.
Add a new config option "tune.bufsize.small" to specify the size of the
allocated objects. A special check ensures that it is not greater than
the default bufsize to avoid unexpected effects.
QUIC MUX buffer allocation limit is now directly based on the underlying
congestion window size. previous static limit based on conn-tx-buffers
is now unused. As such, this commit adds a warning to users to prevent
that it is now obsolete.
Secondly, update max-window-size setting. It is now the main entrypoint
to limit both the maximum congestion window size and the number of QUIC
MUX allocated buffer on emission. Remove its special value '0' which was
used to automatically adjust it on now unused conn-tx-buffers.
Define a new global keyword tune.quic.frontend.max-window-size. This
allows to set globally the maximum congestion window size for each QUIC
frontend connections.
The default value is 0. It is a special value which automatically derive
the size from the configured QUIC connection buffer limit. This is
similar to the previous "quic-cc-algo" behavior, which can be used to
override the maximum window size per bind line.
Document nocc congestion algorithm as an entry of quic-cc-algo.
Highlight the fact that it is reserved for debugging and should not be
used outside of this use case.
It is possible to override the default QUIC congestion algorithm on a
bind line. With the same setting, it is also possible to specify the
maximum congestion window size.
The parser rejects values outside of the range between 10k and 4g. This
is in contradiction with the documentation which specify 1k as the lower
value. Correct this value in the documentation.
This should be backported up to 2.9.
Some systems require log formats in the CLF format and that meant that I
could not send my logs for proxies in mode tcp to those servers. This
implements a format that uses log variables that are compatble with TCP
mode frontends and replaces traditional HTTP values in the CLF format
to make them stand out. Instead of logging method and URI like this
"GET /example HTTP/1.1" it will log "TCP " and for a response code I
used "000" so it would be easy to separate from legitimate HTTP
traffic. Now your log servers that require a CLF format can see the
timings for TCP traffic as well as HTTP.
It is now possible to use "drop" keyword for "on" lines under a
log-profile section to specify that no log at all should be emitted for
the specified step (setting an empty format was not sufficient to do so
because only the log payload would be empty, not the log header, thus the
log would still be emitted).
It may be useful to selectively disable logging at specific steps for a
given log target (since the log profile may be set on log directives):
log-profile myprof
on request format "blabla" sd "custom sd"
on response drop
New testcase was added to reg-tests/log/log_profiles.vtc
Released version 3.1-dev5 with the following main changes :
- BUG/MINOR: quic: Lack of precision when computing K (cubic only cc)
- MEDIUM: ssl/quic: implement quic crypto with EVP_AEAD
- MINOR: quic: rename confusing wording aes to hp
- MEDIUM: quic: add key argument to header protection crypto functions
- MEDIUM: quic: implement CHACHA20_POLY1305 for AWS-LC
- MEDIUM: sink: assume sft appctx stickiness
- MINOR: quic: delay Retry emission on quic-force-retry
- MEDIUM: quic: implement quic-initial rules
- MINOR: quic: support ACL for quic-initial rules
- MINOR: quic: pass quic_dgram as obj_type for quic-initial rules
- MINOR: quic: implement reject quic-initial action
- MINOR: quic: implement send-retry quic-initial rules
- BUG/MEDIUM: quic: fix invalid conn reject with CONNECTION_REFUSED
- MEDIUM: h1: allow to preserve keep-alive on T-E + C-L
- MINOR: quic: Add information to "show quic" for CUBIC cc.
- MINOR: quic: Dump TX in flight bytes vs window values ratio.
- BUG/MEDIUM: jwt: Clear SSL error queue on error when checking the signature
- BUILD: cfgparse-quic: fix build error on Solaris due to missing netinet/in.h
- MINOR: queue: add a function to check for TOCTOU after queueing
- BUG/MEDIUM: queue: deal with a rare TOCTOU in assign_server_and_queue()
- DOC: config: Add documentation about spop mode for backends
- BUG/MEDIUM: stconn: Report error on SC on send if a previous SE error was set
- BUG/MEDIUM: mux-pt/mux-h1: Release the pipe on connection error on sending path
- BUILD: mux-pt: Use the right name for the sedesc variable
- BUG/MINOR: stconn: bs.id and fs.id had their dependencies incorrect
- BUG/MEDIUM: ssl: reactivate 0-RTT for AWS-LC
- BUG/MEDIUM: ssl: 0-RTT initialized at the wrong place for AWS-LC
- BUILD: ssl: replace USE_OPENSSL_AWSLC by OPENSSL_IS_AWSLC
- BUG/MEDIUM: quic: prevent conn freeze on 0RTT undeciphered content
- MINOR: tcp_sample: Move TCP low level sample fetch function to control layer
- MINOR: quic: Define ->get_info() control layer callback for QUIC
- MINOR: flags/mux-quic: decode qcc and qcs flags
- BUG/MINOR: quic: fix fc_rtt/srtt values
- BUG/MIONR: quic: fix fc_lost
- BUG/MINOR: h1: do not forward h2c upgrade header token
- BUG/MINOR: h2: reject extended connect for h2c protocol
- BUG/MEDIUM: http-ana: Report error on write error waiting for the response
- BUG/MEDIUM: h2: Only report early HTX EOM for tunneled streams
- BUG/MEDIUM: mux-h2: Propagate term flags to SE on error in h2s_wake_one_stream
- BUG/MEDIUM: peer: Notify the applet won't consume data when it waits for sync
- BUG/MINOR: quic: Too shord datagram during O-RTT handshakes (aws-lc only)
- CI: add weekly QUIC Interop regression against AWS-LC
- CI: harden NetBSD builds by ERR=1
- BUG/MINOR: quic: Too short datagram during packet building failures (aws-lc only)
- DEV: coccinelle: add a test to detect unchecked strdup()
- BUG/MINOR: fcgi-app: handle a possible strdup() failure
- BUG/MEDIUM: server/addr: fix tune.events.max-events-at-once event miss and leak
- MINOR: quic: convert qc_stream_desc release field to flags
- MINOR: quic: implement function to check if STREAM is fully acked
- BUG/MEDIUM: quic: handle retransmit for standalone FIN STREAM
- MINOR: quic: enforce ACK reception is handled in order
- DOC: configuration: fix alphabetical ordering of {bs,fs}.aborted
- MINOR: stconn: add a new pair of sf functions {bs,fs}.debug_str
- MINOR: mux-h2: implement the debug string for logs
- MINOR: mux-quic: define dump functions for QCC and QCS
- MINOR: mux-quic: implement debug string for logs
- MINOR: quic: dump quic_conn debug string for logs
- MINOR: time: define tot_time structure
- MINOR: mux-quic: measure QCS lifetime and its blocking state
- BUG/MINOR: trace/quic: enable conn/session pointer recovery from quic_conn
- BUG/MINOR: trace/quic: permit to lock on frontend/connect/session etc
- BUG/MEDIUM: trace: fix null deref in lockon mechanism since TRACE_ENABLED()
- BUG/MINOR: trace: automatically start in waiting mode with "start <evt>"
- BUG/MINOR: trace/quic: make "qconn" selectable as a lockon criterion
- BUG/MINOR: quic/trace: make quic_conn_enc_level_init() emit NEW not CLOSE
- MINOR: trace: support setting the sink and level for all sources at once
- MINOR: session/trace: enable very minimal session tracing
- MEDIUM: trace: implement a "follow" mechanism
- MINOR: trace: move the known trace context into a dedicated struct
- MINOR: trace: add a per-source helper to pre-fill the context
- MINOR: mux-h2: add a trace context filling helper
- MINOR: mux-h1: add a trace context filling helper
- MINOR: mux-quic: don't leave dangling pointer after freeing qcs->sd
- MINOR: mux-quic: add a trace context filling helper
- MINOR: mux-h1/trace: add a state trace on stream creation/upgrade
- MINOR: mux-h2/trace: add a state trace on stream creation/destruction
- MINOR: mux-h3/trace: add a state trace on stream creation/destruction
- BUG/MINOR: quic: prevent freeze after early QCS closure
- MINOR: server: ensure max_events_at_once > 0 in server_atomic_sync()
- MINOR: cfgparse: add struct cfgfile to represent config in memory
- REORG: tools: move list_append_word to cfgparse
- MINOR: startup: adapt list_append_word to use cfgfile
- MINOR: cfgparse: add load_cfg_in_mem
- MINOR: cfgparse: load_cfg_in_mem: take in account file size
- MINOR: tools: add fgets_from_mem
- MEDIUM: startup: make read_cfg() return immediately on ENOMEM
- MEDIUM: startup: load and parse configs from memory
- MINOR: startup: rename readcfgfile in parse_cfg
With "follow" from one source to another, it becomes possible for a
source to automatically follow another source's tracked pointer. The
best example is the session:
- the "session" source is enabled and has a "lockon session"
-> its lockon_ptr is equal to the session when valid
- other sources (h1,h2,h3 etc) are configured for "follow session"
and will then automatically check if session's lockon_ptr matches
its own session, in which case tracing will be enabled for that
trace (no state change).
It's not necessary to start/pause/stop traces when using this, only
"follow" followed by a source with lockon enabled is needed. Some
combinations might work better than others. At the moment the session
is almost never known from the backend, but this may improve.
The meta-source "all" is supported for the follower so that all sources
will follow the tracked one.
It's extremely painful to have to set "trace <src> sink buf1" for all
sources, then to do the same for "level developer" (for example). Let's
have a possibility via a meta-source "all" to apply the change to all
sources at once. This currently supports level and sink, which are not
dependent on the source, this is a good start.
These are passed to the underlying mux to retrieve debug information
at the mux level (stream/connection) as a string that's meant to be
added to logs.
The API is quite complex just because we can't pass any info to the
bottom function. So we construct a union and pass the argument as an
int, and expect the callee to fill that with its buffer in return.
Most likely the mux->ctl and ->sctl API should be reworked before
the release to simplify this.
The functions take an optional argument that is a bit mask of the
layers to dump:
muxs=1
muxc=2
xprt=4
conn=8
sock=16
The default (0) logs everything available.
These must be before {bs,fs}.id, not after. Should be backported wherever
068ce2d5d2 ("MINOR: stconn: Add samples to retrieve about stream aborts")
is (normally 3.0).
This low level callback may be called by several sample fetches for
frontend connections like "fc_rtt", "fc_rttvar" etc.
Define this callback for QUIC protocol as pointer to quic_get_info().
This latter supports these sample fetches:
"fc_lost", "fc_reordering", "fc_rtt" and "fc_rttvar".
Update the documentation consequently.
The SPOE was refactored. Now backends referenced by a SPOE filter must use
the spop mode to be able to use the spop multiplexer for server connections.
The "spop" mode was added in the list of supported mode for backends.
In 2.5-dev9, commit 631c7e866 ("MEDIUM: h1: Force close mode for invalid
uses of T-E header") enforced a recently arrived new security rule in the
HTTP specification aiming at preventing a class of content-smuggling
attacks involving HTTP/1.0 agents. It consists in handling the very rare
T-E + C-L requests or responses in close mode.
It happens it does have an impact of a rare few and very old clients
(probably running insecure TLS stacks by the way) that continue to send
both with their POST requests. The impact is that for each and every
request they'll have to reconnect, possibly negotiating a full TLS
handshake that becomes harmful to the machine in terms of CPU computation.
This commit adds a new option "h1-do-not-close-on-insecure-transfer-encoding"
that does exactly what it says, it just asks not to close on such messages,
even though the message continues to be sanitized and C-L dropped. It means
that the risk is only between the sender and haproxy, which is limited, and
might be the only acceptable solution for such environments having to deal
with broken implementations.
The cases are so rare that it should not need to be backported, or in the
worst case, to the latest LTS if there is any demand.
Define a new quic-initial "send-retry" rule. This allows to force the
emission of a Retry packet on an initial without token instead of
instantiating a new QUIC connection.
Define a new quic-initial action named "reject". Contrary to dgram-drop,
the client is notified of the rejection by a CONNECTION_CLOSE with
CONNECTION_REFUSED error code.
To be able to emit the necessary CONNECTION_CLOSE frame, quic_conn is
instantiated, contrary to dgram-drop action. quic_set_connection_close()
is called immediatly after qc_new_conn() which prevents the handshake
startup.
Add ACL condition support for quic-initial rules. This requires the
extension of quic_parse_quic_initial() to parse an extra if/unless
block.
Only layer4 client samples are allowed to be used with quic-initial
rules. However, due to the early execution of quic-initial rules prior
to any connection instantiation, some samples are non supported.
To be able to use the 4 described samples, a dummy session is
instantiated before quic-initial rules execution. Its src and dst fields
are set from the received datagram values.
Implement a new set of rules labelled as quic-initial.
These rules as specific to QUIC. They are scheduled to be executed early
on Initial packet parsing, prior a new QUIC connection instantiation.
Contrary to tcp-request connection, this allows to reject traffic
earlier, most notably by avoiding unnecessary QUIC SSL handshake
processing.
A new module quic_rules is created. Its main function
quic_init_exec_rules() is called on Initial packet parsing in function
quic_rx_pkt_retrieve_conn().
For the moment, only "accept" and "dgram-drop" are valid actions. Both
are final. The latter drops silently the Initial packet instead of
allocating a new QUIC connection.
Released version 3.1-dev4 with the following main changes :
- MINOR: limits: prepare to keep limits in one place
- REORG: fd: move raise_rlim_nofile to limits
- CLEANUP: fd: rm struct rlimit definition
- REORG: global: move rlim_fd_*_at_boot in limits
- MINOR: haproxy: prepare to move limits-related code
- REORG: haproxy: move limits handlers to limits
- MINOR: limits: add is_any_limit_configured
- CLEANUP: quic: remove obsolete comment on send
- MINOR: quic: extend detection of UDP API OS features
- MINOR: quic: activate UDP GSO for QUIC if supported
- MINOR: quic: define quic_cc_path MTU as constant
- MINOR: quic: add GSO parameter on quic_sock send API
- MAJOR: quic: support GSO when encoding datagrams
- MEDIUM: quic: implement GSO fallback mechanism
- MINOR: quic: add counters of sent bytes with and without GSO
- BUG/MEDIUM: bwlim: Be sure to never set the analyze expiration date in past
- CLEANUP: proto: rename TID affinity callbacks
- CLEANUP: quic: rename TID affinity elements
- BUG/MINOR: limits: fix license type in limits.h
- BUG/MINOR: session: Eval L4/L5 rules defined in the default section
- CLEANUP: stconn: Fix a typo in comments for SE_ABRT_SRC_*
- MEDIUM: spoe: Remove fragmentation support
- MEDIUM: spoe: Remove async mode support
- MINOR: spoe: Use only a global engine-id per agent
- MINOR: spoe: Remove debugging
- MAJOR: spoe: Remove idle applets and pipelining support
- MINOR: spoe: Remove the dedicated SPOE applet task
- MEDIUM: proxy/spoe: Add a SPOP mode
- MEDIUM: applet: Add a .shut callback function for applets
- MINOR: connection: No longer include stconn type header in connection-t.h
- MINOR: stconn: Use a dedicated function to get the opposite sedesc
- MINOR: spoe: Rename some flags and constant to use SPOP prefix
- MINOR: spoe: Dynamically alloc the message list per event of an agent
- MINOR: spoe: Move all stuff regarding the filter/applet in the C file
- MINOR: spoe: Move spoe_str_to_vsn() into the header file
- MEDIUM: mux-spop: Introduce the SPOP multiplexer
- MEDIUM: check/spoe: Use SPOP multiplexer to perform SPOP health-checks
- MAJOR: spoe: Rewrite SPOE applet to use the SPOP mux
- CLEANUP: spoe: Uniformize function definitions
- MINOR: spoe: Add internal sample fetch to retrieve the SPOE engine ID
- MEDIUM: spoe: Set a specific name for the connection pool of SPOP servers
- MINOR: backend: Remove test on HTX streams to reuse idle connections on connect
- MEDIUM: spoe: Force the reuse 'always' mode for SPOP backends
- MINOR: mux-spop: Use a dedicated function to update the SPOP connection timeout
- MAJOR: mux-spop: Make the SPOP connections reusable
- MINOR: stats-html: Display reuse ratio for spop connections
- MEDIUM: spoe: Directly xfer NOTIFY frame when SPOE applet is created
- MEDIUM: spoe: Directly receive ACK frame in the SPOE context buffer
- MEDIUM: mux-spop/spoe: Save negociated max-frame-size value in the mux
- MINOR: spoe: Remove the spop version from the SPOE appctx context
- MEDIUM: mux-spop: Add checks on received frames
- MEDIUM: mux-spop: Announce the pipeling support if possible
- MEDIUM: spoe: Forward SPOE context error to the SPOE applet
- MEDIUM: spoe: Make the SPOE applet use its own buffers
- DOC: spoe: Update SPOE documentation to reflect recent refactoring
- BUILD: mux-spop: fix build failure on gcc 4-10 and clang
- MINOR: fd: don't scan the full fdtab on all threads
- MINOR: server: better mt_list usage for node migration (prev_deleted handling)
- BUG/MINOR: do not close uninit FD in quic_test_socketops()
- BUG/MEDIUM: debug/cli: fix "show threads" crashing with low thread counts
- MINOR: debug: prepare feed_post_mortem_late
- CLEANUP: debug: fix indents in debug_parse_cli_show_dev
- MINOR: debug: store runtime uid/gid in postmortem
- MINOR: debug: keep runtime capabilities in post_mortem
- MINOR: debug: use LIM2A to show limits
- MINOR: debug: prepare to show runtime limits
- MINOR: debug: keep runtime limits in postmortem
- DOC: install: don't reference removed CPU arg
- BUG/MEDIUM: ssl_sock: fix deadlock in ssl_sock_load_ocsp() on error path
- BUG/MAJOR: mux-h2: force a hard error upon short read with pending error
- MEDIUM: sink: start applets asynchronously
- OPTIM: sink: balance applets accross threads
- MEDIUM: ocsp: fix ocsp when the chain is loaded from 'issuers-chain-path'
- MEDIUM: ssl: add extra_chain to ckch_data
- MINOR: ssl: change issuers-chain for show_cert_detail()
- REGTESTS: ssl: test the issuers-chain-path keyword
- DOC: configuration: issuers-chain-path not compatible with OCSP
- DOC: configuration: issuers-chain-path is compatible with OCSP
- BUG/MEDIUM: startup: fix zero-warning mode
- BUILD: tree-wide: cast arguments to tolower/toupper to unsigned char (2)
- MINOR: cfgparse-global: move mode's keywords in cfg_kw_list
- MINOR: cfgparse-global: move no<poller_name> in cfg_kw_list
- DOC: config: improve the http-keep-alive section
- BUG/MINOR: stick-table: fix crash for src_inc_gpc() without stkcounter
- BUG/MINOR: server: Don't warn fallback IP is used during init-addr resolution
- BUG/MINOR: cli: Atomically inc the global request counter between CLI commands
- MINOR: stream: Add a pointer to set the parent stream
- MINOR: vars: Fill a description instead of hash and scope when a name is parsed
- MINOR: vars: Use a description to set/unset a variable instead of its hash and scope
- MEDIUM: vars: Be able to parse parent scopes for variables
- MINOR: vars: Use a variable description to get variables of a specific scope
- MEDIUM: vars: Be able to retrieve variable of the parent stream, if any
- MEDIUM: spoe: Set the parent stream for SPOE streams
- BUG/MINOR: quic: Non optimal first datagram.
- DOC: config: Add a dedicated section about variables
- DOC: config: Add info about variable scopes referencing the parent stream
- DOC: config: Explicitly state the SPOE streams have a usable parent stream
- MINOR: quic: Avoid cc priv buffer overflow.
- MINOR: spoe: Add a function to validate a version is supported
- MINOR: spoe: export the list of SPOP error reasons
- MEDIUM: spoe/tcpcheck: Reintroduce SPOP check as a customized tcp-check
- REGTESTS: check/spoe: Re-enable the script performing SPOP health-checks
- BUG/MEDIUM: sink: properly init applet under sft lock
- MINOR: sink: unify and sink_forward_io_handler() and sink_forward_oc_io_handler()
- MINOR: sink: Remove useless test on SE_FL_SHR/SHW flags
- MINOR: sink: merge sink_forward_io_handler() with sink_forward_oc_io_handler()
- MINOR: sink: add some comments about sft->appctx usage in applet handlers
- MINOR: sink: distinguish between hard and soft close in _sink_forward_io_handler()
- MEDIUM: sink: don't set NOLINGER flag on the outgoing stream interface
- MINOR: ring: count processed messages in ring_dispatch_messages()
- MINOR: sink: add processed events counter in sft
- MEDIUM: sink: "max-reuse" support for sink servers
- OPTIM: sink: consider threads' current load when rebalancing applets
Thanks to the previous commit, it is now possible to know how many events
were processed for a given sft/server sink pair. As mentioned in commit
c454296 ("OPTIM: sink: balance applets accross threads"), let's provide
the ability to restart a server connection when a certain amount of events
were processed to help better balance the load over multiple threads.
For this, we make use the of "max-reuse" server keyword which was only
relevant under "http" context so far. Under sink context, "max-reuse"
corresponds to the number of times the tcp connection can be reused
for sending messages, which in fact means that "max-reuse + 1" is the
number of events (ie: messages) that are allowed to be sent using the
same tcp server connection: when this threshold is met, the connection
will be destroyed and a new one will be created on a random thread.
The value is not strict: it is the minimum value above which the
connection may be destroyed since the value is checked after
ring_dispatch_messages() which may process multiple messages at once.
By default, no limit is enforced (the connection will be reused for as
long as it is available).
The documentation was updated accordingly.
It is explicitly mentionned in the configuration manual that the parent of a
SPOE stream is the filtered stream. It means variables of the filtered
stream are usable from the SPOE stream.
It is now possible for a stream to have a parent and it is also possible to
retrieve variables defined in the parent stream context. To do so, some
extra scopes were introduced. The section 2.8. was updated accordingly.
The variables in the HAProxy configuration are now described in a dedicated
section. Instead of repeating the same description everywhere a variable
name can be used, the section 2.8. is now referenced.
Nathan Wehrman suggested this add-on to try to better explain the
interactions between http-keep-alive and other timeouts, and the
impacts on protocols (HTTP/1, HTTP/2 etc).
Let's check the second time a global counter of "ha_warning" messages, if
zero-warning is set. And let's do this just before forking. At this moment we
are sure, that we've already done all init operations, where we could emit
"ha_warning", and we still have stderr fd opened.
Even with the second check, we could lost some late and rare warnings
about failing to drop supplementary groups and about re-enabling core dumps.
Notes about this are added into 'zero-warning' keyword description.
Since patch f3dfd95a ("MEDIUM: ocsp: fix ocsp when the chain is loaded
from 'issuers-chain-path'") the OCSP features are compatible with
'issuers-chain-path'.
The SPOE was refactored. Several parameters were deprecated. Fragmentation
and async capabilities support were removed. The default log-format was
updated too.
So, the SPOE documentation was updated accordingly.
The related issue is #2502.
Add a startup test for GSO support in quic_test_socketopts() and
automatically activate it in qc_prep_pkts() when building datagrams as
big as MTU.
Also define a new config option tune.quic.disable-udp-gso. This is
useful to prevent warning on older platform or to debug an issue which
may be related to GSO.
Released version 3.1-dev3 with the following main changes :
- BUG/MINOR: quic: Wrong datagram building when probing.
- BUG/MEDIUM: quic: fix possible exit from qc_check_dcid() without unlocking
- BUG/MINOR: promex: Remove Help prefix repeated twice for each metric
- DOC: configuration: add details about crt-store in bind "crt" keyword
- BUG/MEDIUM: hlua/cli: Fix lua CLI commands to work with applet's buffers
- DOC: configuration: more details about the master-worker mode
- BUG/MEDIUM: server: fix race on server_atomic_sync()
- BUG/MINOR: jwt: don't try to load files with HMAC algorithm
- CLEANUP: quic: cleanup prototypes related to CIDs handling
- CLEANUP: quic: remove non-existing quic_cid_tree definition
- MINOR: quic: remove access to CID global tree outside of quic_cid module
- REORG: quic: remove quic_cid_trees reference from proto_quic
- MINOR: quic: add 2 BUG_ON() on datagram dispatch
- MINOR: quic: ensure quic_conn is never removed on thread affinity rebind
- MEDIUM: init: set default for fd_hard_limit via DEFAULT_MAXFD
- DOC: configuration: update maxconn description
- MINOR: proto: extend connection thread rebind API
- BUG/MEDIUM: quic: prevent crash on accept queue full
- BUG/MEDIUM: peers: Fix crash when syncing learn state of a peer without appctx
- CI: add weekly QUIC Interop regression against LibreSSL
- DEV: flags/quic: decode quic_conn flags
- MINOR: quic: rename "ssl error" trace
- BUG/MEDIUM: init: fix fd_hard_limit default in compute_ideal_maxconn
- BUG/MINOR: jwt: fix variable initialisation
- MINOR: ssl/sample: ssl_c_san returns a comma separated list of SAN
- OPTIM: pool: improve needed_avg cache line access pattern
- MAJOR: import: update mt_list to support exponential back-off (try #2)
- CI: weekly QUIC Interop: try to fix private image
- BUG/MINOR: h1: Fail to parse empty transfer coding names
- BUG/MINOR: h1: Reject empty coding name as last transfer-encoding value
- BUG/MEDIUM: h1: Reject empty Transfer-encoding header
- BUG/MEDIUM: spoe: Be sure to create a SPOE applet if none on the current thread
- BUILD: listener: silence a build warning about unused value without threads
- DOC: architecture: remove the totally outdated architecture manual
- SCRIPTS: create-release: no more need to skip architecture.txt
We've discussed about removing it many times and I thought it had been
removed long ago, but apparently not as William proved me. Let's get
rid of it now. It's totally outdated (last updated 18 years ago, when
laptop processors were still 32 bits), mentions keywords and external
products that don't exist anymore. It's not even on docs.haproxy.org.
At some point, old stuff must really die.
This is the second attempt at importing the updated mt_list code (commit
59459ea3). The previous one was attempted with commit c618ed5ff4 ("MAJOR:
import: update mt_list to support exponential back-off") but revealed
problems with QUIC connections and was reverted.
The problem that was faced was that elements deleted inside an iterator
were no longer reset, and that if they were to be recycled in this form,
they could appear as busy to the next user. This was trivially reproduced
with this:
$ cat quic-repro.cfg
global
stats socket /tmp/sock1 level admin
stats timeout 1h
limited-quic
frontend stats
mode http
bind quic4@:8443 ssl crt rsa+dh2048.pem alpn h3
timeout client 5s
stats uri /
$ ./haproxy -db -f quic-repro.cfg &
$ h2load -c 10 -n 100000 --npn h3 https://127.0.0.1:8443/
=> hang
This was purely an API issue caused by the simplified usage of the macros
for the iterator. The original version had two backups (one full element
and one pointer) that the user had to take care of, while the new one only
uses one that is transparent for the user. But during removal, the element
still has to be unlocked if it's going to be reused.
All of this sparked discussions with Fred and Aurlien regarding the still
unclear state of locking. It was found that the lock API does too much at
once and is lacking granularity. The new version offers a much more fine-
grained control allowing to selectively lock/unlock an element, a link,
the rest of the list etc.
It was also found that plenty of places just want to free the current
element, or delete it to do anything with it, hence don't need to reset
its pointers (e.g. event_hdl). Finally it appeared obvious that the
root cause of the problem was the unclear usage of the list iterators
themselves because one does not necessarily expect the element to be
presented locked when not needed, which makes the unlock easy to overlook
during reviews.
The updated version of the list presents explicit lock status in the
macro name (_LOCKED or _UNLOCKED suffixes). When using the _LOCKED
suffix, the caller is expected to unlock the element if it intends to
reuse it. At least the status is advertised. The _UNLOCKED variant,
instead, always unlocks it before starting the loop block. This means
it's not necessary to think about unlocking it, though it's obviously
not usable with everything. A few _UNLOCKED were used at obvious places
(i.e. where the element is deleted and freed without any prior check).
Interestingly, the tests performed last year on QUIC forwarding, that
resulted in limited traffic for the original version and higher bit
rate for the new one couldn't be reproduced because since then the QUIC
stack has gaind in efficiency, and the 100 Gbps barrier is now reached
with or without the mt_list update. However the unit tests definitely
show a huge difference, particularly on EPYC platforms where the EBO
provides tremendous CPU savings.
Overall, the following changes are visible from the application code:
- mt_list_for_each_entry_safe() + 1 back elem + 1 back ptr
=> MT_LIST_FOR_EACH_ENTRY_LOCKED() or MT_LIST_FOR_EACH_ENTRY_UNLOCKED()
+ 1 back elem
- MT_LIST_DELETE_SAFE() no longer needed in MT_LIST_FOR_EACH_ENTRY_UNLOCKED()
=> just manually set iterator to NULL however.
For MT_LIST_FOR_EACH_ENTRY_LOCKED()
=> mt_list_unlock_self() (if element going to be reused) + NULL
- MT_LIST_LOCK_ELT => mt_list_lock_full()
- MT_LIST_UNLOCK_ELT => mt_list_unlock_full()
- l = MT_LIST_APPEND_LOCKED(h, e); MT_LIST_UNLOCK_ELT();
=> l=mt_list_lock_prev(h); mt_list_lock_elem(e); mt_list_unlock_full(e, l)
The ssl_c_san sample fetch returns a list of Subject Alt Name which was
presented by the client certificate.
The format is the same as the "openssl x509 -text" command, it's a
Description: Value list separated by commas.
The format is directly generated by the GENERAL_NAME_print() openssl
function.
https://github.com/openssl/openssl/blob/openssl-3.0/crypto/x509/v3_san.c#L207
Example:
IP Address:127.0.0.1, IP Address:127.0.0.2, IP Address:127.0.0.3, URI:http://docs.haproxy.org/2.7/, DNS:ca.tests.haproxy.com
Let's update maxconn keyword description, in order to make it clear, which
setting has the precedence over the global.maxconn and the SYSTEM_MAXCONN if
set.
Let's provide a default value for fd_hard_limit, if it's not set in the
configuration. With this patch we could set some specific default via
compile-time variable DEFAULT_MAXFD as well. Hope, this will be helpfull for
haproxy package maintainers.
make -j 8 TARGET=linux-glibc DEBUG=-DDEFAULT_MAXFD=50000
If haproxy is comipled without DEFAULT_MAXFD defined, the default will be set
to 1048576.
This is done to avoid killing the process by its watchdog, while it started
without any limitations in its configuration or in the command line and the
hard RLIMIT_NOFILE is extremely huge (~1000000000). We use in this case
compute_ideal_maxconn() to calculate maxconn and maxsock, maxsock defines the
size of internal fdtab, which becames very-very large as well. When
the process starts to simply loop over this fdtab (0(n)), this takes a lot of
time, so watchdog does it job.
To avoid this, maxconn now is always reduced to some reasonable value either
by explicit global.fd-hard-limit from configuration, or by its default. The
default may be changed at build-time and overwritten then by
global.fd-hard-limit at runtime. Explicit global.fd-hard-limit from the
configuration has always precedence over DEFAULT_MAXFD, if set.
Must be backported in all stable versions until v2.6.0, including v2.6.0.
Released version 3.1-dev2 with the following main changes :
- BUG/MINOR: log: fix broken '+bin' logformat node option
- DEBUG: hlua: distinguish burst timeout errors from exec timeout errors
- REGTESTS: ssl: fix some regtests 'feature cmd' start condition
- BUG/MEDIUM: ssl: AWS-LC + TLSv1.3 won't do ECDSA in RSA+ECDSA configuration
- MINOR: ssl: activate sigalgs feature for AWS-LC
- REGTESTS: ssl: activate new SSL reg-tests with AWS-LC
- BUG/MEDIUM: proxy: fix email-alert invalid free
- REORG: mailers: move free_email_alert() to mailers.c
- BUG/MINOR: proxy: fix email-alert leak on deinit() (2nd try)
- DOC: configuration: fix alphabetical order of bind options
- DOC: management: document ptr lookup for table commands
- BUG/MAJOR: quic: fix padding with short packets
- BUG/MAJOR: quic: do not loop on emission on closing/draining state
- MINOR: sample: date converter takes HTTP date and output an UNIX timestamp
- SCRIPTS: git-show-backports: do not truncate git-show output
- DOC: api/event_hdl: small updates, fix an example and add some precisions
- BUG/MINOR: h3: fix crash on STOP_SENDING receive after GOAWAY emission
- BUG/MINOR: mux-quic: fix crash on qcs SD alloc failure
- BUG/MINOR: h3: fix BUG_ON() crash on control stream alloc failure
- BUG/MINOR: quic: fix BUG_ON() on Tx pkt alloc failure
- DEV: flags/show-fd-to-flags: adapt to recent versions
- MINOR: capabilities: export capget and __user_cap_header_struct
- MINOR: capabilities: prepare support for version 3
- MINOR: capabilities: use _LINUX_CAPABILITY_VERSION_3
- MINOR: cli/debug: show dev: add cmdline and version
- MINOR: cli/debug: show dev: show capabilities
- MINOR: debug: print gdb hints when crashing
- BUILD: debug: also declare strlen() in __ABORT_NOW()
- BUILD: Missing inclusion header for ssize_t type
- BUG/MINOR: hlua: report proper context upon error in hlua_cli_io_handler_fct()
- MINOR: cfgparse/log: remove leftover dead code
- BUG/MEDIUM: stick-table: Decrement the ref count inside lock to kill a session
- MINOR: stick-table: Always decrement ref count before killing a session
- REORG: init: do MODE_CHECK_CONDITION logic first
- REORG: init: encapsulate CHECK_CONDITION logic in a func
- REORG: init: encapsulate 'reload' sockpair and master CLI listeners creation
- REORG: init: encapsulate code that reads cfg files
- BUG/MINOR: server: fix first server template name lookup UAF
- MINOR: activity: make the memory profiling hash size configurable at build time
- BUG/MEDIUM: server/dns: prevent DOWN/UP flap upon resolution timeout or error
- BUG/MEDIUM: h3: ensure the ":method" pseudo header is totally valid
- BUG/MEDIUM: h3: ensure the ":scheme" pseudo header is totally valid
- BUG/MEDIUM: quic: fix race-condition in quic_get_cid_tid()
- BUG/MINOR: quic: fix race condition in qc_check_dcid()
- BUG/MINOR: quic: fix race-condition on trace for CID retrieval
Fix an example suggesting that using EVENT_HDL_SUB_TYPE(x, y) with y being
0 was valid. Then add some notes to explain how to use
EVENT_HDL_SUB_FAMILY() and EVENT_HDL_SUB_TYPE() with valid values.
Also mention that the feature is available starting from 2.8 and not 2.7.
Finally, perform some purely cosmetic updates.
This could be backported in 2.8.
Add missing documentation and examples for the optional ptr lookup method
for table {show,set,clear} commands introduced in commit 9b2717e7 ("MINOR:
stktable: use {show,set,clear} table with ptr"), as initially described in
GH #2118.
It may be backported in 3.0.
Released version 3.1-dev1 with the following main changes :
- REGTESTS: Remove REQUIRE_VERSION=2.1 from all tests
- REGTESTS: Remove REQUIRE_VERSION=2.2 from all tests
- CI: use "--no-install-recommends" for apt-get
- CI: switch to lua 5.4
- CI: use USE_PCRE2 instead of USE_PCRE
- DOC: replace the README by a markdown version
- CI: VTest: accelerate package install a bit
- ADMIN: acme.sh: remove the old acme.sh code
- BUG/MINOR: cfgparse: remove the correct option on httpcheck send-state warning
- BUG/MINOR: tcpcheck: report correct error in tcp-check rule parser
- BUG/MINOR: tools: fix possible null-deref in env_expand() on out-of-memory
- DOC: configuration: add an example for keywords from crt-store
- CI: speedup apt package install
- DOC: add the FreeBSD status badge to README.md
- DOC: change the link to the FreeBSD CI in README.md
- MINOR: stktable: avoid ambiguous stktable_data_ptr() usage in cli_io_handler_table()
- BUG/MINOR: hlua: use CertCache.set() from various hlua contexts
- CLEANUP: hlua: fix CertCache class comment
- CI: FreeBSD: upgrade image, packages
- BUG/MEDIUM: h1-htx: Don't state interim responses are bodyless
- MEDIUM: stconn: Be able to unblock zero-copy data forwarding from done_fastfwd
- BUG/MEDIUM: mux-quic: Unblock zero-copy forwarding if the txbuf can be released
- BUG/MINOR: quic: prevent crash on qc_kill_conn()
- CLEANUP: hlua: use hlua_pusherror() where relevant
- BUG/MINOR: hlua: don't use lua_pushfstring() when we don't expect LJMP
- BUG/MINOR: hlua: fix unsafe hlua_pusherror() usage
- BUG/MINOR: hlua: prevent LJMP in hlua_traceback()
- CLEANUP: hlua: get rid of hlua_traceback() security checks
- BUG/MINOR: hlua: fix leak in hlua_ckch_set() error path
- CLEANUP: hlua: simplify ambiguous lua_insert() usage in hlua_ctx_resume()
- BUG/MEDIUM: mux-quic: Don't unblock zero-copy fwding if blocked during nego
- MINOR: mux-quic: Don't send an emtpy H3 DATA frame during zero-copy forwarding
- BUG/MEDIUM: ssl: wrong priority whem limiting ECDSA ciphers in ECDSA+RSA configuration
- BUG/MEDIUM: ssl: bad auth selection with TLS1.2 and WolfSSL
- BUG/MINOR: quic: fix computed length of emitted STREAM frames
- BUG/MINOR: quic: ensure Tx buf is always purged
- BUG/MEDIUM: stconn/mux-h1: Fix suspect change causing timeouts
- BUG/MAJOR: mux-h1: Properly copy chunked input data during zero-copy nego
- BUG/MINOR: mux-h1: Use the right variable to set NEGO_FF_FL_EXACT_SIZE flag
- DOC: install: remove boringssl from the list of supported libraries
- MINOR: log: fix "http-send-name-header" ignore warning message
- BUG/MINOR: proxy: fix server_id_hdr_name leak on deinit()
- BUG/MINOR: proxy: fix log_tag leak on deinit()
- BUG/MINOR: proxy: fix email-alert leak on deinit()
- BUG/MINOR: proxy: fix check_{command,path} leak on deinit()
- BUG/MINOR: proxy: fix dyncookie_key leak on deinit()
- BUG/MINOR: proxy: fix source interface and usesrc leaks on deinit()
- BUG/MINOR: proxy: fix header_unique_id leak on deinit()
- MINOR: proxy: add proxy_free_common() helper function
- BUG/MEDIUM: proxy: fix UAF with {tcp,http}checks logformat expressions
- MINOR: log: change wording in lf_expr_postcheck() error message
- BUG/MEDIUM: log: fix lf_expr_postcheck() behavior with default section
- CLEANUP: log/proxy: fix comment in proxy_free_common()
- DOC: config: move "hash-key" from proxy to server options
- DOC: config: add missing section hint for "guid" proxy keyword
- DOC: config: add missing context hint for new server and proxy keywords
- BUG/MINOR: promex: Skip resolvers metrics when there is no resolver section
- DOC: internals: add a documentation about the master worker
- BUG/MAJOR: mux-h1: Prevent any UAF on H1 connection after draining a request
- BUG/MINOR: quic: fix padding of INITIAL packets
- OPTIM: quic: fill whole Tx buffer if needed
- MINOR: quic: refactor qc_build_pkt() error handling
- MINOR: quic: use global datagram headlen definition
- MINOR: quic: refactor qc_prep_pkts() loop
- DOC/MINOR: management: add missed -dR and -dv options
- DOC/MINOR: management: add -dZ option
- DOC: management: rename show stats domain cli "dns" to "resolvers"
- REORG: log: reorder send log helpers by dependency order
- MINOR: session: expose session_embryonic_build_legacy_err() function
- MEDIUM: log/session: handle embryonic session log within sess_log()
- MINOR: log: provide sending log context to process_send_log() when available
- MINOR: log: add log_orig_to_str() function
- MINOR: log: provide log origin in logformat expressions using '%OG'
- CLEANUP: log: remove ambiguous legacy comment for resolve_logger()
- MINOR: log/backend: always free parsing hints in resolve_logger()
- MINOR: log: make resolve_logger() static
- MINOR: log: provide proxy context to resolve_logger()
- MINOR: log: add __send_log_set_metadata_sd helper
- MINOR: log: add logger flags
- MINOR: log: add log-profile parsing logic
- MINOR: log: add log profile buildlines
- MEDIUM: log: handle log-profile in process_send_log()
- DOC: config: add documentation for log profiles
- REGTESTS: log: add a test for log-profile
- MINOR: ssl: add ssl_sock_bind_verifycbk() in ssl_sock.h
- REORG: ssl: move the SNI selection code in ssl_clienthello.c
- BUILD: ssl: fix build with wolfSSL
- CI: github: upgrade aws-lc to 1.29.0
- Revert "CI: github: upgrade aws-lc to 1.29.0"
- MEDIUM: ssl: support for ECDA+RSA certificate selection with AWS-LC
- BUILD: ssl: disable deprecated functions for AWS-LC 1.29.0
- MINOR: ssl: relax the 'ssl.default-dh-param' keyword parsing
- CI: github: upgrade aws-lc to 1.29.0
- DOC: INSTALL: minimum AWS-LC version is v1.22.0
- CI: github: do the AWS-LC weekly build with ERR=1
Now that log-profile parsing logic has been implemented in "MINOR: log:
add log-profile parsing logic" and is actually effective since "MEDIUM:
log: handle log-profile in process_send_log()", let's document the feature
and add some examples.
Log-profile section is declared like this:
log-profile myprof
log-tag "custom-tag"
on error format "%ci: error"
on any format "(custom httplog) ${HAPROXY_HTTP_LOG_FMT}" sd "[exampleSDID@1234 step=\"accept\" id=\"%ID\"]"
(check out the documentation for the full list of options, some options
are only relevant under specific contexts)
And used this way (from usual "log" directive lines):
global
log stdout format rfc5424 profile myprof local0
--------------
For now, the use of log-profiles is somewhat limited because we lack
the ability to explicitly trigger the log building process at specific
steps during the stream handling, but it should gain more traction over
the time as the feature evolves and new mechanisms allowing the emission
of logs at expected processing steps will be added.
It should partially fix GH #401
'%OG' logformat alias may be used to report the log origin (when/where)
that triggered log generation using sess_build_logline().
Possible values are:
- "sess_error": log was generated during session error handling
- "sess_killed": log was generated during session abortion (killed
embryonic session)
- "txn_accept": log was generated right after frontend conn was accepted
- "txn_request": log was generated after client request was received
- "txn_connect": log was generated after backend connection establishment
- "txn_response": log was generated during server response handling
- "txn_close": log was generated at the final txn step, before closing
- "unspec": unknown or not specified
Documentation was updated.
In commit f8642ee82 ("MEDIUM: resolvers: rename dns extra counters to
resolvers extra counters"), we renamed "dns" counters to "resolvers", but
we forgot to update the documentation accordingly.
This may be backported to all stable versions.
Add a documentation about the history of the master-worker and how it
was implemented in its first version and how it is currently working.
This is a global view of the architecture, and not an exhaustive
explanation of all mechanisms.
To stay consistent with the work started in 54627f991 ("DOC: config: add
context hint for proxy keywords") and 3d4e1e682 ("DOC: config: add context
hint for server keywords"), we add missing context hint for "guid" (both
proxy and server) keyword and "hash-key" server keyword that were added
during 3.0 development.
This may be backported in 3.0.
"guid" proxy keyword added in da754b45 ("MINOR: proxy: implement GUID
support") was lacking the section hint in the keyword description, let's
fix that.
It could be backported in 3.0 with da754b45.
As reported by Ashley Morris, "hash-key" keyword which was introduced in
commit faa8c3e0 ("MEDIUM: lb-chash: Deterministic node hashes based on
server address") doesn't belong to proxy keywords and should be found in
5.2 "Server and default-server options" instead.
It should be backported in 3.0 with faa8c3e0
Using CertCache.set() from init context wasn't explicitly supported and
caused the process to crash:
crash.lua:
core.register_init(function()
CertCache.set{filename="reg-tests/ssl/set_cafile_client.pem", ocsp=""}
end)
crash.conf:
global
lua-load crash.lua
listen front
bind localhost:9090 ssl crt reg-tests/ssl/set_cafile_client.pem ca-file reg-tests/ssl/set_cafile_interCA1.crt verify none
./haproxy -f crash.conf
[NOTICE] (267993) : haproxy version is 3.0-dev2-640ff6-910
[NOTICE] (267993) : path to executable is ./haproxy
[WARNING] (267993) : config : missing timeouts for proxy 'front'.
| While not properly invalid, you will certainly encounter various problems
| with such a configuration. To fix this, please ensure that all following
| timeouts are set to a non-zero value: 'client', 'connect', 'server'.
[1] 267993 segmentation fault (core dumped) ./haproxy -f crash.conf
This is because in hlua_ckch_set/hlua_ckch_commit_yield, we always
consider that we're being called from a yield-capable runtime context.
As such, hlua_gethlua() is never checked for NULL and we systematically
try to wake hlua->task and yield every 10 instances.
In fact, if we're called from the body or init context (that is, during
haproxy startup), hlua_gethlua() will return NULL, and in this case we
shouldn't care about yielding because it is ok to commit all instances
at once since haproxy is still starting up.
Also, when calling CertCache.set() from a non-yield capable runtime
context (such as hlua fetch context), we kept doing as if the yield
succeeded, resulting in unexpected function termination (operation
would be aborted and the CertCache lock wouldn't be released). Instead,
now we explicitly state in the doc that CertCache.set() cannot be used
from a non-yield capable runtime context, and we raise a runtime error
if it is used that way.
These bugs were discovered by reading the code when trying to address
Svace report documented by @Bbulatov GH #2586.
It should be backported up to 2.6 with 30fcca18 ("MINOR: ssl/lua:
CertCache.set() allows to update an SSL certificate file")
In ticket #785, people are still confused about how to use the crt-store
load parameters in a crt-list.
This patch adds an example.
This must be backported in 3.0
This patch removes the old README file and replaces it with a more
modern markdown version which allows clickable links on the github page.
It also adds some of the Github Actions worfklow Status.
This patch includes the HAProxy png in the doc directory.
Released version 3.0.0 with the following main changes :
- MINOR: sample: implement the uptime sample fetch
- CI: scripts: fix build of vtest regarding option -C
- CI: scripts: build vtest using multiple CPUs
- MINOR: log: rename 'log-format tag' to 'log-format alias'
- DOC: config: document logformat item naming and typecasting features
- BUILD: makefile: yearly reordering of objects by build time
- BUILD: fd: errno is also needed without poll()
- DOC: config: fix two typos "RST_STEAM" vs "RST_STREAM"
- DOC: config: refer to the non-deprecated keywords in ocsp-update on/off
- DOC: streamline http-reuse and connection naming definition
- REGTESTS: complete http-reuse test with pool-conn-name
- DOC: config: add %ID logformat alias alternative
- CLEANUP: ssl/ocsp: readable ifdef in ssl_sock_load_ocsp
- BUG/MINOR: ssl/ocsp: init callback func ptr as NULL
- CLEANUP: ssl_sock: move dirty openssl-1.0.2 wrapper to openssl-compat
- BUG/MINOR: activity: fix Delta_calls and Delta_bytes count
- CI: github: upgrade the WolfSSL job to 5.7.0
- DOC: install: update quick build reminders with some missing options
- DOC: install: update the range of tested openssl version to cover 3.3
- DEV: patchbot: prepare for new version 3.1-dev
- MINOR: version: mention that it's 3.0 LTS now.
With the introduction of "pool-conn-name", documentation related to
http-reuse was rendered more complex than already, notably with multiple
cross-references between "pool-conn-name" and "sni" server keywords.
Took the opportunity to improve all http-reuse related documentation.
First, "http-reuse" keyword general purpose has been greatly expanded
and reordered.
Then, "pool-conn-name" and "sni" have been clarified, in particular the
relation between them, with the foremost being an advanced usage to the
default SSL SNI case in the context of http-reuse. Also update
attach-srv rule documentation as its name parameter is directly linked
to both "pool-conn-name" and "sni".
The ability to give a name to a logformat_node (known as logformat item in
the documentation) implemented in 2ed6068f2a ("MINOR: log: custom name for
logformat node") wasn't documented.
The same goes for the ability to force the logformat_node's output type to
a specific type implemented in 1448478d62 ("MINOR: log: explicit
typecasting for logformat nodes")
Let's quickly describe such new usages at the start of the custom log
format section.
In 2.9 we started to introduce an ambiguity in the documentation by
referring to historical log-format variables ('%var') as log-format
tags in 739c4e5b1e ("MINOR: sample: accept_date / request_date return
%Ts / %tr timestamp values") and 454c372b60 ("DOC: configuration: add
sample fetches for timing events").
In fact, we've had this confusion between log-format tag and log-format
var for more than 10 years now, but in 2.9 it was the first time the
confusion was exposed in the documentation.
Indeed, both 'log-format variable' and 'log-format tag' actually refer
to the same feature (that is: '%B' and friends that can be used for
direct access to some log-oriented predefined fetches instead of using
%[expr] with generic sample expressions).
This feature was first implemented in 723b73ad75 ("MINOR: config: Parse
the string of the log-format config keyword") and later documented in
4894040fa ("DOC: log-format documentation"). At that time, it was clear
that we used to name it 'log-format variable'.
But later the same year, 'log-format tag' naming started to appear in
some commit messages (while still referring to the same feature), for
instance with ffc3fcd6d ("MEDIUM: log: report SSL ciphers and version
in logs using logformat %sslc/%sslv").
Unfortunately in 2.9 when we added (and documented) new log-format
variables we officially started drifting to the misleading 'log-format
tag' naming (perhaps because it was the most recent naming found for
this feature in git log history, or because the confusion has always
been there)
Even worse, in 3.0 this confusion led us to rename all 'var' occurrences
to 'tag' in log-format related code to unify the code with the doc.
Hopefully William quickly noticed that we made a mistake there, but
instead of reverting to historical naming (log-format variable), it was
decided that we must use a different name that is less confusing than
'tags' or 'variables' (tags and variables are keywords that are already
used to designate other features in the code and that are not very
explicit under log-format context today).
Now we refer to '%B' and friends as a logformat alias, which is
essentially a handy way to print some log oriented information in the
log string instead of leveraging '%[expr]' with generic sample expressions
made of fetches and converters. Of course, there are some subtelties, such
as a few log-format aliases that still don't have sample fetch equivalent
for historical reasons, and some aliases that may be a little faster than
their generic sample expression equivalents because most aliases are
pretty much hardcoded in the log building function. But in general
logformat aliases should be simply considered as an alternative to using
expressions (with '%[expr']')
Also, under log-format context, when we want to refer to either an alias
('%alias') or an expression ('%[expr]'), we should use the generic term
'logformat item', which in fact designates a single item within the
logformat string provided by the user. Indeed, a logformat item (whether
is is an alias or an expression) always starts with '%' and may accept
optional flags / arguments
Both the code and the documentation were updated in that sense, hopefully
this will clarify things and prevent future confusions.
Released version 3.0-dev13 with the following main changes :
- CLEANUP: ssl/cli: remove unused code in dump_crtlist_conf
- MINOR: ssl: check parameter in ckch_conf_cmp()
- BUG/MINOR: ring: free ring's allocated area not ring's usable area when using maps
- DOC: configuration: rework the crt-store load documentation
- DEBUG: tools: add vma_set_name() helper
- DEBUG: shctx: name shared memory using vma_set_name()
- DEBUG: sink: add name hint for memory area used by memory-backed sinks
- DEBUG: pollers: add name hint for large memory areas used by pollers
- DEBUG: errors: add name hint for startup-logs memory area
- DEBUG: fd: add name hint for large memory areas
- MEDIUM: ssl: don't load file by discovering them in crt-store
- DOC: configuration: update the crt-list documentation
- DOC: configuration: add the supported crt-store options in crt-list
- BUG/MEDIUM: proto: fix fd leak in <proto>_connect_server
- MINOR: sock: set conn->err_code in case of EPERM
- BUG/MINOR: http-ana: Don't crush stream termination condition on internal error
- MAJOR: spoe: Let the SPOE back into the game
- BUG/MINOR: connection: parse PROXY TLV for LOCAL mode
- BUG/MINOR: server: free PROXY v2 TLVs on srv drop
- MINOR: rhttp: add log on connection allocation failure
- BUG/MEDIUM: rhttp: fix preconnect on single-thread
- BUG/MINOR: rhttp: prevent listener suspend
- BUG/MINOR: rhttp: fix task_wakeup state
- MINOR: session: define flag to explicitely release listener on free
- MEDIUM: rhttp: create session for active preconnect
- MINOR: rhttp: support PROXY emission on preconnect
- MINOR: connection: support PROXY v2 TLV emission without stream
- MINOR: traces: enumerate the list of levels/verbosities when not found
- BUG/MINOR: sock: fix sock_create_server_socket
- MINOR: proto: fix coding style
- BUG/MAJOR: quic: Crash with TLS_AES_128_CCM_SHA256 (libressl only)
- REGTESTS: scripts: allow to change the vtest timeout
- BUG/MEDIUM: quic_tls: prevent LibreSSL < 4.0 from negotiating CHACHA20_POLY1305
- CI: scripts/build-ssl.sh: loudly fail on unsupported platforms
- BUG/MEDIUM: mux-quic: Create sedesc in same time of the QUIC stream
- MINOR: mux-quic: Set abort info for SC-less QCS on STOP_SENDING frame
- CI: scripts/build-ssl: add a DESTDIR and TMPDIR variable
- CI: scripts/buil-ssl: cleanup the boringssl and quictls build
- MINOR: config: add thread-hard-limit to set an upper bound to nbthread
- BUILD: quic: fix unused variable warning when threads are disabled
- BUG/MEDIUM: stick-tables: Fix race with peers when trashing oldest entries
- BUG/MEDIUM: stick-tables: Fix race with peers when killing a sticky session
- BUG/MEDIUM: stick-tables: make sure never to create two same remote entries
- CLEANUP: stick-tables: remove a few unneeded tests for use_wrlock
- MINOR: stick-tables: remove the uneeded read lock in stksess_free()
- CLEANUP: tools: fix vma_set_name() function comment
- DEBUG: tools: add vma_set_name_id() helper
- DEBUG: pollers/fd: add thread id suffix to per-thread memory areas name hints
- DOC: config: fix aes_gcm_enc() description text
- BUILD: trace: fix warning on null dereference
- MEDIUM: config: prevent communication with privileged ports
- MAJOR: config: prevent QUIC with clients privileged port by default
- BUG/MINOR: quic: adjust restriction for stateless reset emission
- MINOR: quic: clarify doc for quic_recv()
- MINOR: server: generalize sni expr parsing
- MINOR: server: define pool-conn-name keyword
- MEDIUM: connection: use pool-conn-name instead of sni on reuse
- BUG/MINOR: rhttp: initialize session origin after preconnect reversal
- BUG/MEDIUM: server/dns: preserve server's port upon resolution timeout or error
- BUG/MINOR: http-htx: Support default path during scheme based normalization
- BUG/MINOR: server: Don't reset resolver options on a new default-server line
- DOC: quic: specify that connection migration is not supported
- DOC: config: fix incorrect section reference about custom log format
- DOC: config: uniformize the naming and description of custom log format args
- DOC: config: clarify the fact that custom log format is not just for logging
- REGTESTS: acl_cli_spaces: avoid a warning caused by undefined logs
The wording in the Custom log format section was still extremely centered
on logging, but it's about time to mention that these are usable for other
actions as well, otherwise it's very confusing for newcomers who try to
define a variable or header. The updated text also reminds about the risks
of safe encodings that may (rarely) mangle an output string, and encourages
to migrate away from the unquoted definition which is full of backslashes.
It would definitely deserve further improvements and refinements.
A significant number of actions now take arguments that are evaluated as
log-format expressions. Some of them are called "fmt", others "string".
The description of the argument sometimes just says "the log-format
string" or "log format" or "custom log format" etc. Most of them do not
mention the section to visit, and section 8.2 speaking about log-format
is very centric on logs usage (the primary use case), making all of this
very confusing for newcomers.
Since section 8.2.6 is titled "Custom log format" and describes the syntax
to be used with the "log-format" (and other) directives, let's call this
"Custom log format" everywhere and mention section 8.2.6. When the field
was called "string", it was also renamed to "fmt".
It doesn't seem worth backporting this, unless it applies fine.
Since 2.5 with commit 98b930d043 ("MINOR: ssl: Define a default https
log format"), some log-format sections were shifted a bit without having
been renumberred, causing 8.2.4 to be referenced as the custom log
format while it's in fact 8.2.6. This patch fixes the affected
locations.
In addition two places mentioned 8.2.6 instead of 8.2.5 for the error
log format.
This can be backported to 2.6.
Currently haproxy does not support QUIC connection migration. This is
advertized to clients on their connections. Document this in the first
QUIC related paragraph.
This should be backported up to 2.6.
Define a new server keyword pool-conn-name. The purpose of this keyword
will be to identify connections inside the idle connections pool,
replacing SNI in case SSL is not wanted.
This keyword uses a sample expression argument. It thus can reuse
existing function parse_srv_expr() for parsing. In the future, it may be
necessary to define a keyword variant which uses a logformat for
extensability.
This patch only implement parsing. Argument is stored inside new server
field <pool_conn_name> and expression is generated in
_srv_parse_finalize() into <pool_conn_name_expr>.
If pool-conn-name is not set but SNI is, the latter is reused
automatically as pool-conn-name via _srv_parse_finalize(). This ensures
current reuse behavior remains compatible and idle connection reuse will
not mix connections with different SNIs by mistake.
Main usage will be for rhttp when SSL is not wanted between the two
haproxy instances. Previously, it was possible to use "sni" keyword even
without SSL on a server line which have a similar effect. However,
having a dedicated "pool-conn-name" keyword is deemed clearer. Besides,
it would allow for more complex configuration where pool-conn-name and
SNI are use in parallel with different values.
Previous commit introduce new protection mechanism to forbid
communications with clients which use a privileged source port. By
default, this mechanism is disabled for every protocols.
This patch changes the default value and activate the protection
mechanism for QUIC protocol. This is justified as it is a probable sign
of DNS/NTP amplification attack.
This is labelled as major as it can be a breaking change with some
network environments.
This commit introduces a new global setting named
harden.reject_privileged_ports.{tcp|quic}. When active, communications
with clients which use privileged source ports are forbidden. Such
behavior is considered suspicious as it can be used as spoofing or
DNS/NTP amplication attack.
Value is configured per transport protocol. For each TCP and QUIC
distinct code locations are impacted by this setting. The first one is
in sock_accept_conn() which acts as a filter for all TCP based
communications just after accept() returns a new connection. The second
one is dedicated for QUIC communication in quic_recv(). In both cases,
if a privileged source port is used and setting is disabled, received
message is silently dropped.
By default, protection are disabled for both protocols. This is to be
able to backport it without breaking changes on stable release.
This should be backported as it is an interesting security feature yet
relatively simple to implement.
On todays large systems, it's not always desired to run on all threads
for light loads, and usually users enforce nbthread to a lower value
(e.g. 8). The problem is that this is a fixed value, and moving such
configs to smaller machines continues to enforce the value and this
becomes extremely unproductive due to having more threads than CPUs.
This also happens quite a bit in VMs, containers, or cloud instances
of various sizes.
This commit introduces the thread-hard-limit setting that allows to only
set an upper bound to the number of threads without raising a lower value.
This means that using "thread-hard-limit 8" will make sure that no more
than 8 threads will be used when available, but it will remain two when
run on a dual-core machine.
It's quite frustrating, particularly on the command line, not to have
access to the list of available levels and verbosities when one does
not exist for a given source, because there's no easy way to find them
except by starting without and connecting to the CLI. Let's enumerate
the list of supported levels and verbosities when a name does not match.
For example:
$ ./haproxy -db -f quic-repro.cfg -dt h2:help
[NOTICE] (9602) : haproxy version is 3.0-dev12-60496e-27
[NOTICE] (9602) : path to executable is ./haproxy
[ALERT] (9602) : -dt: no such trace level 'help', available levels are 'error', 'user', 'proto', 'state', 'data', and 'developer'.
$ ./haproxy -db -f quic-repro.cfg -dt h2:user:help
[NOTICE] (9604) : haproxy version is 3.0-dev12-60496e-27
[NOTICE] (9604) : path to executable is ./haproxy
[ALERT] (9604) : -dt: no such trace verbosity 'help' for source 'h2', available verbosities for this source are: 'quiet', 'clean', 'minimal', 'simple', 'advanced', and 'complete'.
The same is done for the CLI where the existing help message is always
displayed when entering an invalid verbosity or level.
This reverts commits 885e40494c and
dff9807188.
We decided to spend some time to refactor and rationnalize the SPOE for the
3.1. Thus there is no reason to still consider it as deprecated for the
3.0. Compatibility between the both versions will be maintained.
See #2502 for more info.
The load keyword from the documentation has its own section to be
readable (like the server or bind options section).
The ocsp-update keyword was move from the bind section to the crt-list
load one.
Released version 3.0-dev12 with the following main changes :
- CI: drop asan.log umbrella completely
- BUG/MINOR: log: fix leak in add_sample_to_logformat_list() error path
- BUG/MINOR: log: smp_rgs array issues with inherited global log directives
- MINOR: rhttp: Don't require SSL when attach-srv name parsing
- REGTESTS: ssl: be more verbose with ocsp_compat_check.vtc
- DOC: Update UUID references to RFC 9562
- MINOR: hlua: add hlua_nb_instruction getter
- MEDIUM: hlua: take nbthread into account in hlua_get_nb_instruction()
- BUG/MEDIUM: server: clear purgeable conns before server deletion
- BUG/MINOR: mux-quic: fix error code on shutdown for non HTTP/3
- BUG/MINOR: qpack: fix error code reported on QPACK decoding failure
- BUG/MEDIUM: htx: mark htx_sl as packed since it may be realigned
- BUG/MEDIUM: stick-tables: properly mark stktable_data as packed
- SCRIPTS: run-regtests: fix a few occurrences of extended regexes
- BUG/MINOR: ssl_sock: fix xprt_set_used() to properly clear the TASK_F_USR1 bit
- MINOR: dynbuf: provide a b_dequeue() variant for multi-thread
- BUG/MEDIUM: muxes: enforce buf_wait check in takeover()
- BUG/MINOR: h1: Check authority for non-CONNECT methods only if a scheme is found
- BUG/MEDIUM: h1: Reject CONNECT request if the target has a scheme
- BUG/MAJOR: h1: Be stricter on request target validation during message parsing
- MINOR: qpack: prepare error renaming
- MINOR: h3/qpack: adjust naming for errors
- MINOR: h3: adjust error reporting on sending
- MINOR: h3: adjust error reporting on receive
- MINOR: mux-quic: support glitches
- MINOR: h3: report glitch on RFC violation
- BUILD: stick-tables: better mark the stktable_data as 32-bit aligned
- MINOR: ssl: rename tune.ssl.ocsp-update.mode in ocsp-update.mode
- REGTESTS: update the ocsp-update tests
- BUILD: stats: remove non portable getline() usage
- MEDIUM: ssl: add ocsp-update.mindelay and ocsp-update.maxdelay
- BUILD: log: get rid of non-portable strnlen() func
- BUG/MEDIUM: fd: prevent memory waste in fdtab array
- CLEANUP: compat: make the MIN/MAX macros more reliable
- Revert: MEDIUM: evports: permit to report multiple events at once"
- BUG/MINOR: stats: Don't state the 303 redirect response is chunked
- MINOR: mux-h1: Add a flag to ignore the request payload
- REORG: mux-h1: Group H1S_F_BODYLESS_* flags
- CLEANUP: mux-h1: Remove unused H1S_F_ERROR_MASK mask value
- MEDIUM: mux-h1: Support C-L/T-E header suppressions when sending messages
- MINOR: ssl: ckch_store_new_load_files_conf() loads filenames from ckch_conf
- MEDIUM: ssl/crtlist: loading crt-store keywords from a crt-list
- CLEANUP: ssl/ocsp: remove the deprecated parsing code for "ocsp-update"
- MINOR: ssl: pass ckch_store instead of ckch_data to ssl_sock_load_ocsp()
- MEDIUM: ssl: ckch_conf_parse() uses -1/0/1 for off/default/on
- MINOR: ssl: handle PARSE_TYPE_INT and PARSE_TYPE_ONOFF in ckch_store_load_files()
- MINOR: ssl/ocsp: use 'ocsp-update' in crt-store
- MINOR: ssl: ckch_conf_clean() utility function for ckch_conf
- MEDIUM: ssl: add ocsp-update.disable global option
- MEDIUM: ssl/cli: handle crt-store keywords in crt-list over the CLI
- MINOR: ssl: ckch_conf_cmp() compare multiple ckch_conf structures
- MEDIUM: ssl: temporarily load files by detecting their presence in crt-store
- REGTESTS: ocsp-update: change the reg-test to support the new crt-store mode
- DOC: capabilities: fix chapter header rendering
The header of a new management guide chapter, "13.1. Linux capabilities
support", is not rendered in HTML format in a proper way, because of missing
dots at the end of this chapter's number.
This option allow to disable completely the ocsp-update.
To achieve this, the ocsp-update.mode global keyword don't rely anymore
on SSL_SOCK_OCSP_UPDATE_OFF during parsing to call
ssl_create_ocsp_update_task().
Instead, we will inherit the SSL_SOCK_OCSP_UPDATE_* value from
ocsp-update.mode for each certificate which does not specify its own
mode.
To disable completely the ocsp without editing all crt entries,
ocsp-update.disable is used instead of "ocsp-update.mode" which is now
only used as the default value for crt.
Since the ocsp-update is not strictly a tuning of the SSL stack, but a
feature of its own, lets rename the option.
The option was also missing from the index.
Implement basic support for glitches on QUIC multiplexer. This is mostly
identical too glitches for HTTP/2.
A new configuration option named tune.quic.frontend.glitches-threshold
is defined to limit the number of glitches on a connection before
closing it.
Glitches counter is incremented via qcc_report_glitch(). A new
qcc_app_ops callback <report_susp> is defined. On threshold reaching, it
allows to set an application error code to close the connection. For
HTTP/3, value H3_EXCESSIVE_LOAD is returned. If not defined, default
code INTERNAL_ERROR is used.
For the moment, no glitch are reported for QUIC or HTTP/3 usage. This
will be added in future patches as needed.
Based on Willy's idea (from 3.0-dev6 announcement message): in this patch
we try to reduce the max latency that can be caused by running lua scripts
with default settings.
Indeed, by default, hlua engine is allowed to process up to 10k
instructions per batch. While this value was found to be the optimal one
for a single thread, it turns out that keeping a thread busy for 10k lua
instructions could increase thread contention. This is especially true
when the script is loaded with 'lua-load', because in that case the
current thread owns the main lua lock and prevent other threads from
making any progress if they're also waiting on the main lock.
Thanks to Thierry Fournier's work, we know that performance-wise we can
reach optimal performance by sticking between 500 and 10k instructions
per batch. Given that, when the script is loaded using 'lua-load', if no
"tune.lua.forced-yield" was set by the user, we automatically divide the
default value (10K) by the number of threads haproxy can use to reduce
thread contention (given that all threads could compete for the main lua
lock), however we make sure not to return a value below 500, because
Thierry's work showed that this would come with a significant performance
loss.
The historical behavior may still be enforced by setting
"tune.lua.forced-yield" to 10000 in the global config section.
When support for UUIDv7 was added in commit
aab6477b67
the specification still was a draft.
It has since been published as RFC 9562.
This patch updates all UUID references from the obsoleted RFC 4122 and the
draft for RFC 9562 to the published RFC 9562.
Released version 3.0-dev11 with the following main changes :
- BUILD: clock: improve check for pthread_getcpuclockid()
- CI: add Illumos scheduled workflow
- CI: netbsd: limit scheduled workflow to parent repo only
- OPTIM: log: resolve logformat options during postparsing
- BUG/MINOR: haproxy: only tid 0 must not sleep if got signal
- REGTEST: add tests for acl() sample fetch
- BUG/MINOR: acl: support built-in ACLs with acl() sample
- BUG/MINOR: cfgparse: use curproxy global var from config post validation
- MEDIUM: stconn/muxes: Add an abort reason for SE shutdowns on muxes
- MINOR: mux-h2: Set the SE abort reason when a RST_STREAM frame is received
- MEDIUM: mux-h2: Forward h2 client cancellations to h2 servers
- MINOR: mux-quic: Set tha SE abort reason when a STOP_SENDING frame is received
- MINOR: stconn: Add samples to retrieve about stream aborts
- MINOR: mux-quic: Add .ctl callback function to get info about a mux connection
- MINOR: muxes: Add ctl commands to get info on streams for a connection
- MINOR: connection: Add samples to retrieve info on streams for a connection
- BUG/MEDIUM: log/ring: broken syslog octet counting
- BUG/MEDIUM: mux-quic: fix crash on STOP_SENDING received without SD
- DOC: lua: fix filters.txt file location
- MINOR: dynbuf: pass a criticality argument to b_alloc()
- MINOR: dynbuf: add functions to help queue/requeue buffer_wait fields
- MINOR: dynbuf: use the b_queue()/b_requeue() functions everywhere
- MEDIUM: dynbuf: make the buffer_wq an array of list heads
- CLEANUP: tinfo: better align fields in thread_ctx
- MINOR: dynbuf: provide a b_dequeue() function to detach a bw from the queue
- MEDIUM: dynbuf: generalize the use of b_dequeue() to detach buffer_wait
- MEDIUM: dynbuf/stream: re-enable queueing upon failed buffer allocation
- MEDIUM: dynbuf/stream: do not allocate the buffers in the callback
- MEDIUM: applet: make appctx_buf_available() only wake the applet up, not allocate
- MINOR: applet: set the blocking flag in the buffer allocation function
- MINOR: applet: adjust the allocation criticity based on the requested buffer
- MINOR: dynbuf/mux-h1: use different criticalities for buffer allocations
- MEDIUM: dynbuf/mux-h1: do not allocate the buffers in the callback
- MEDIUM: dynbuf: refrain from offering a buffer if more critical ones are waiting
- MINOR: stconn: report that a buffer allocation succeeded
- MINOR: stream: report that a buffer allocation succeeded
- MINOR: applet: report about buffer allocation success
- MINOR: mux-h1: report that a buffer allocation succeeded
- MEDIUM: stream: allocate without queuing when retrying
- MEDIUM: channel: allocate without queuing when retrying
- MEDIUM: mux-h1: allocate without queuing when retrying
- MEDIUM: dynbuf: implement emergency buffers
- MEDIUM: dynbuf: use emergency buffers upon failed memory allocations
The buffer reserve set by tune.buffers.reserve has long been unused, and
in order to deal gracefully with failed memory allocations we'll need to
resort to a few emergency buffers that are pre-allocated per thread.
These buffers are only for emergency use, so every time their count is
below the configured number a b_free() will refill them. For this reason
their count can remain pretty low. We changed the default number from 2
to 4 per thread, and the minimum value is now zero (e.g. for low-memory
systems). The tune.buffers.limit setting has always been a problem when
trying to deal with the reserve but now we could simplify it by simply
pushing the limit (if set) to match the reserve. That was already done in
the past with a static value, but now with threads it was a bit trickier,
which is why the per-thread allocators increment the limit on the fly
before allocating their own buffers. This also means that the configured
limit is saner and now corresponds to the regular buffers that can be
allocated on top of emergency buffers.
At the moment these emergency buffers are not used upon allocation
failure. The only reason is to ease bisecting later if needed, since
this commit only has to deal with resource management.
The goal is to indicate how critical the allocation is, between the
least one (growing an existing buffer ring) and the topmost one (boot
time allocation for the life of the process).
The 3 tcp-based muxes (h1, h2, fcgi) use a common allocation function
to try to allocate otherwise subscribe. There's currently no distinction
of direction nor part that tries to allocate, and this should be revisited
to improve this situation, particularly when we consider that mux-h2 can
reduce its Tx allocations if needed.
For now, 4 main levels are planned, to translate how the data travels
inside haproxy from a producer to a consumer:
- MUX_RX: buffer used to receive data from the OS
- SE_RX: buffer used to place a transformation of the RX data for
a mux, or to produce a response for an applet
- CHANNEL: the channel buffer for sync recv
- MUX_TX: buffer used to transfer data from the channel to the outside,
generally a mux but there can be a few specificities (e.g.
http client's response buffer passed to the application,
which also gets a transformation of the channel data).
The other levels are a bit different in that they don't strictly need to
allocate for the first two ones, or they're permanent for the last one
(used by compression).
At the beginning of the filter class section, we encourage the user to
check out filters.txt file to get to know how the filters API works
within haproxy.
However the file location is incorrect. The proper directory to look for
the file is: doc/internals/api.
It should be backported up to 2.5.
Thanks to the previous fix, it is now possible to get the number of opened
streams for a connection and the negociated limit. Here, corresponding
sample feches are added, in fc_ and bc_ scopes.
On frontend side, the limit of streams is imposed by HAProxy. But on the
backend side, the limit is defined by the server. it may be useful for
debugging purpose because it may explain slow-downs on some processing.
It is now possible to retrieve some info about the abort received for a
server or a client stream, if any.
* fs.aborted and bs.aborted can be used to know if an abort was received
on frontend or backend side. A boolean is returned.
* fs.rst_code and bs.rst_code return the code of the received RESET_STREAM
frame for a H2 stream or the code of the received STOP_SENDING frame for
a QUIC stream. In both cases, the error code attached to the frame is
returned. The sample fetch fails if no such frame was received or if the
stream is not an H2/QUIC stream.
Released version 3.0-dev10 with the following main changes :
- BUG/MEDIUM: cache: Vary not working properly on anything other than accept-encoding
- REGTESTS: cache: Add test on 'vary' other than accept-encoding
- BUG/MINOR: stats: replace objt_* by __objt_* macros
- CLEANUP: tools/cbor: rename cbor_encode_ctx struct members
- MINOR: log/cbor: _lf_cbor_encode_byte() explicitly requires non-NULL ctx
- BUG/MINOR: log: fix global lf_expr node options behavior
- CLEANUP: log: add a macro to know if a lf_node is configurable
- MINOR: httpclient: allow to use absolute URI with new flag HC_F_HTTPROXY
- MINOR: ssl: introduce ocsp_update.http_proxy for ocsp-update keyword
- BUG/MINOR: log/encode: consider global options for key encoding
- BUG/MINOR: log/encode: fix potential NULL-dereference in LOGCHAR()
- BUG/MINOR: log: fix global lf_expr node options behavior (2nd try)
- MINOR: log/cbor: _lf_cbor_encode_byte() explicitly requires non-NULL ctx (again)
- BUG/MEDIUM: log: don't ignore disabled node's options
- BUG/MINOR: stconn: don't wake up an applet waiting on buffer allocation
- MINOR: sock: rename sock to sock_fd in sock_create_server_socket
- MEDIUM: proto_uxst: take in account server namespace
- MEIDUM: unix sock: use my_socketat to create bind socket
- MINOR: sock_set_mark: take sock family in account
- MEDIUM: proto: make common fd checks in sock_create_server_socket
- MINOR: sock: add EPERM case in sock_handle_system_err
- MINOR: capabilities: add cap_sys_admin support
- CLEANUP: ssl: clean the includes in ssl_ocsp.c
- CLEANUP: ssl: move the global ocsp-update options parsing to ssl_ocsp.c
- MINOR: stats: fix visual alignment for stat_cols_px definition
- MINOR: stats: convert req_tot as generic column
- MINOR: stats: prepare stats-file support for values other than FN_COUNTER
- MINOR: counters: move freq-ctr from proxy/server into counters struct
- MINOR: stats: support rate in stats-file
- MINOR: stats: convert rate as generic column for proxy stats
- MINOR: counters: move last_change into counters struct
- MINOR: stats: support age in stats-file
- MINOR: stats: convert age as generic column for proxy stat
- CLEANUP: ssl: rename new_ckch_store_load_files_path() to ckch_store_new_load_files_path()
- MINOR: ssl: rename ocsp_update.http_proxy into ocsp-update.httpproxy
- REORG: stats: define stats-proxy source module
- MINOR: stats: extract proxy clear-counter in a dedicated function
- REGTESTS: stats: add test stats-file counters preload
- CI: netbsd: adjust packages after NetBSD-10 released
- CLEANUP: assorted typo fixes in the code and comments
- REGTESTS: replace REQUIRE_VERSION by version_atleast
- MEDIUM: log: optimizing tmp->type handling in sess_build_logline()
- BUG/MINOR: log: prevent double spaces emission in sess_build_logline()
- OPTIM: log: declare empty buffer as global variable
- OPTIM: log: use thread local lf_buildctx to stop pushing it on the stack
- OPTIM: log: use lf_buildctx's buffer instead of temporary stack buffers
- OPTIM: log: speedup date printing in sess_build_logline() when no encoding is used
If 'namespace' keyword is used in the backend server settings or/and in the
bind string, it means that haproxy process will call setns() to change its
default namespace to the configured one and then, it will create a
socket in this new namespace. setns() syscall requires CAP_SYS_ADMIN
capability in the process Effective set (see man 2 setns). Otherwise, the
process must be run as root.
To avoid to run haproxy as root, let's add cap_sys_admin capability in the
same way as we already added the support for some other network capabilities.
As CAP_SYS_ADMIN belongs to CAP_SYS_* capabilities type, let's add a separate
flag LSTCHK_SYSADM for it. This flag is set, if the 'namespace' keyword was
found during configuration parsing. The flag may be unset only in
prepare_caps_for_setuid() or in prepare_caps_from_permitted_set(), which
inspect process EUID/RUID and Effective and Permitted capabilities sets.
If system doesn't support Linux capabilities or 'cap_sys_admin' was not set
in 'setcap', but 'namespace' keyword is presented in the configuration, we
keep the previous strict behaviour. Process, that has changed uid to the
non-priviledged user, will terminate with alert. This alert invites the user
to recheck its configuration.
In the case, when haproxy will start and run under a non-root user and
'cap_sys_admin' is not set, but 'namespace' keyword is presented, this patch
does not change previous behaviour as well. We'll still let the user to try
its configuration, but we inform via warning, that unexpected things, like
socket creation errors, may occur.
The ocsp_update.http_proxy global option allows to set an HTTP proxy
address which will be used to send the OCSP update request with an
absolute form URI.
Released version 3.0-dev9 with the following main changes :
- BUILD: ssl: use %zd for sizeof() in ssl_ckch.c
- MINOR: backend: use be_counters for health down accounting
- BUG/MINOR: backend: use cum_sess counters instead of cum_conn
- BUG/MINOR: stats: fix stot metric for listeners
- REGTESTS: use -dI for insecure fork by default in the regtest scripts
- MINOR: stats: rename proxy stats
- MINOR: stats: rename ambiguous stat_l and stat_count
- MINOR: stats: rename info stats
- MINOR: stats: use stricter naming stats/field/line
- MINOR: stats: use STAT_F_* prefix for flags
- BUG/MEDIUM: applet: Let's applets decide if they have more data to deliver
- BUILD: stick-tables: silence build warnings when threads are disabled
- MINOR: tools: Rename `ha_generate_uuid` to `ha_generate_uuid_v4`
- MINOR: Add `ha_generate_uuid_v7`
- MINOR: Add support for UUIDv7 to the `uuid` sample fetch
- MEDIUM: shctx: Naming shared memory context
- BUG/MINOR: h1: fix detection of upper bytes in the URI
- MINOR: intops: add a pair of functions to check multi-byte ranges
- TESTS: add a unit test for the multi-byte range checks
- CLEANUP: h1: make use of the multi-byte matching functions
- REGTESTS: ssl: Remove "sleep" calls from ocsp auto update test
- BUG/MEDIUM: peers: Automatically start to learn on local peer
- BUG/MEDIUM: peers: Reprocess peer state after all session shutdowns
- MINOR: peers: Remove unused PEERS_F_RESYNC_REQUESTED flag
- MINOR: peers: Don't set TEACH flags on a peer from the sync task
- MINOR: peers: Use a peer flag to block the applet waiting ack of the sync task
- BUG/MEDIUM: peers: Wait for sync task ack when a resynchro is finished
- MINOR: peers: Remove unused PEERS_F_RESYNC_PROCESS flag
- MINOR: applet: Add a function to know the side where an applet was created
- MEDIUM: peers: Simplify the peer flags dealing with the connection state
- MEDIUM: peers: Use true states for the peer applets as seen from outside
- MEDIUM: peers: Use true states for the learn state of a peer
- MINOR: peers: Start learning for local peer before receiving messages
- MINOR: peers: Rename PEERS_F_TEACH_COMPLETE to PEERS_F_LOCAL_TEACH_COMPLETE
- MINOR: peers: Reorder and slightly rename PEER flags
- MINOR: peers: Reorder and rename PEERS flags
- REORG: peers: Move peer and peers flags in the corresponding header file
- DEV: flags/peers: Decode PEER and PEERS flags
- MINOR: peers: Add comment on processing functions of the sync task
- MINOR: peers: Use a static variable to wait a resync on reload
- BUG/MEDIUM: peers: Use atomic operations on peers flags when necessary
- REORG: peers: Rename all occurrences to 'ps' variable
- BUG/MINOR: peers: Don't wait for a remote resync if there no remote peer
- MINOR: stats: update ambiguous "metrics" naming to "stat_cols"
- MINOR: stats: introduce a more expressive stat definition method
- MINOR: stats: implement automatic metric generation from stat_col
- MINOR: stats: hide some columns in output
- MEDIUM: stats: convert counters to new column definition
- MINOR: stats: define stats-file output format support
- MEDIUM: stats: implement dump stats-file CLI
- MINOR: ist: define iststrip() new function
- MINOR: guid: define guid_is_valid_fmt()
- MINOR: stats: apply stats-file on process startup
- MINOR: stats: parse header lines from stats-file
- MINOR: stats: parse values from stats-file
- MEDIUM: stats: define stats-file keyword
- BUG/MINOR: mworker: reintroduce way to disable seamless reload with -x /dev/null
- CLEANUP: log: remove unused checks for encode_{chunk,string}
- MINOR: log: store lf_expr nodes inside substruct
- MINOR: log: global lf_expr node options
- CLEANUP: log: simplify complex values usages in sess_build_logline()
- MINOR: log: skip custom logformat_node name if empty
- MINOR: log: add lf_int() wrapper to print integers
- MINOR: log: add lf_rawtext{_len}() functions
- MEDIUM: log: pass date strings to lf_rawtext()
- MEDIUM: log: write raw strings using lf_rawtext()
- MEDIUM: log: use lf_rawtext for lf_ip() and lf_port() hex strings
- MINOR: log: explicitly handle %ts and %tsc as text strings
- MINOR: log: use LOG_VARTEXT_{START,END} to enclose text strings
- MINOR: log: make all lf_* sess build helper static
- MINOR: log: merge lf_encode_string() and lf_encode_chunk() logic
- MEDIUM: log: lf_* build helpers now take a ctx argument
- MINOR: log: expose node typecast in lf_buildctx struct
- MINOR: log: postpone conversion for sample expressions in sess_build_logline()
- MINOR: log: add LOG_OPT_NONE flag
- MINOR: log: add no_escape_map to bypass escape with _lf_encode_bytes()
- MINOR: log: add +bin logformat node option
- MINOR: log: add +json encoding option
- MINOR: tools: add cbor encode helpers
- MINOR: log: add +cbor encoding option
- MINOR: log: support true cbor binary encoding
- CLEANUP: dynbuf: move the reserve and limit parsers to dynbuf.c
- MINOR: list: add a macro to detect that a list contains at most one element
- MINOR: cli/wait: rename the condition "srv-unused" to "srv-removable"
As previously discussed, "srv-unused" is sufficiently ambiguous to cause
some trouble over the long term. Better use "srv-removable" to indicate
that the server is removable, and if the conditions to delete a server
change over time, the wait condition will be adjusted without renaming
it.
CBOR in hex format as implemented in previous commit is convenient because
the produced output is portable and can easily be embedded in regular
syslog payloads.
However, one of the goal of CBOR implementation is to be able to produce
"Concise Binary" object representation. Here is an excerpt from cbor.io
website:
"Some applications also benefit from CBOR itself being encoded in
binary. This saves bulk and allows faster processing."
Currently we don't offer that with '+cbor', quite the opposite actually
since a text string encoded with '+cbor' option will be larger than a
text string encoded with '+json' or without encoding at all, because for
each CBOR binary byte, 2 characters will be emitted.
Hopefully, the sink/log API allows for binary data to be passed as
parameter, this is because all relevant functions in the chain don't rely
on the terminating NULL byte and take a string pointer + string length as
parameter. We can actually rely on this property to support the '+bin'
option when combined with '+cbor' to produce RAW binary CBOR output.
Be careful though, as this is only intended for use with set-var-fmt or to
send binary data to capable UDP/ring endpoints.
Example:
log-format "%{+cbor,+bin}o %(test)[bin(00AABB)]"
Will produce:
bf64746573745f4300aabbffff
(output was piped to `hexdump -ve '1/1 "%.2x"'` to dump raw bytes as HEX
characters)
With cbor.me pretty printer, it gives us:
BF # map(*)
64 # text(4)
74657374 # "test"
5F # bytes(*)
43 # bytes(3)
00AABB # "\u0000\xAA\xBB"
FF # primitive(*)
FF # primitive(*)
In this patch, we make use of the CBOR (RFC8949) encode helper functions
from the previous commit to implement '+cbor' encoding option for log-
formats. The logic behind it is pretty similar to '+json' encoding option,
except that the produced output is a CBOR payload written in HEX format so
that it remains compatible to use this with regular syslog endpoints.
Example:
log-format "%{+cbor}o %[int(4)] test %(named_field)[str(ok)]"
Will produce:
BF6B6E616D65645F6669656C64626F6BFF
Detailed view (from cbor.me):
BF # map(*)
6B # text(11)
6E616D65645F6669656C64 # "named_field"
62 # text(2)
6F6B # "ok"
FF # primitive(*)
If the option isn't set globally, but on a specific node instead, then
only the value will be encoded according to CBOR specification.
Example:
log-format "test cbor bool: %{+cbor}[bool(true)]"
Will produce:
test cbor bool: F5
In this patch, we add the "+json" log format option that can be set
globally or per log format node.
What it does, it that it sets the LOG_OPT_ENCODE_JSON flag for the
current context which is provided to all lf_* log building function.
This way, all lf_* are now aware of this option and try to comply with
JSON specification when the option is set.
If the option is set globally, then sess_build_logline() will produce a
map-like object with key=val pairs for named logformat nodes.
(logformat nodes that don't have a name are simply ignored).
Example:
log-format "%{+json}o %[int(4)] test %(named_field)[str(ok)]"
Will produce:
{"named_field": "ok"}
If the option isn't set globally, but on a specific node instead, then
only the value will be encoded according to JSON specification.
Example:
log-format "{ \"manual_key\": %(named_field){+json}[bool(true)] }"
Will produce:
{"manual_key": true}
When the option is set, +E option will be ignored, and partial numerical
values (ie: because of logasap) will be encoded as-is.
Support '+bin' option argument on logformat nodes to try to preserve
binary output type with binary sample expressions.
For this, we rely on the log/sink API which is capable of conveying binary
data since all related functions don't search for a terminating NULL byte
in provided log payload as they take a string pointer and a string length
as argument.
Example:
log-format "%{+bin}o %[bin(00AABB)]"
Will produce:
00aabb
(output was piped to `hexdump -ve '1/1 "%.2x"'` to dump raw bytes as HEX
characters)
This should be used carefully, because many syslog endpoints don't expect
binary data (especially NULL bytes). This is mainly intended for use with
set-var-fmt actions or with ring/udp log endpoints that know how to deal
with such binary payloads.
Also, this option is only supported globally (for use with '%o'), it will
not have any effect when set on an individual node. (it makes no sense to
have binary data in the middle of log payload that was started without
binary data option)
Since the introduction of the automatic seamless reload using the
internal socketpair, there is no way of disabling the seamless reload.
Previously we just needed to remove -x from the startup command line,
and remove any "expose-fd" keyword on stats socket lines.
This was introduced in 2be557f7c ("MEDIUM: mworker: seamless reload use
the internal sockpairs").
The patch copy /dev/null again and pass it to the next exec so we never
try to get socket from the -x.
Must be backported as far as 2.6.
This commit is the final to implement preloading of haproxy internal
counters via stats-file parsing.
Define a global keyword "stats-file". It allows to specify the path to
the stats-file which will be parsed on process startup.
Define a new CLI command "dump stats-file" with its handler
cli_parse_dump_stat_file(). It will loop twice on proxies_list to dump
first frontend and then backend side. It reuses the common function
stats_dump_stat_to_buffer(), using STAT_F_BOUND to restrict on the
correct side.
A new module stats-file.c is added to regroup function specifics to
stats-file. It defines two main functions :
* stats_dump_file_header() to generate the list of column list prefixed
by the line context, either "#fe" or "#be"
* stats_dump_fields_file() to generate each stat lines. Object without
GUID are skipped. Each stat entry is separated by a comma.
For the moment, stats-file does not support statistics modules. As such,
stats_dump_*_line() functions are updated to prevent looping over stats
module on stats-file output.
Released version 3.0-dev8 with the following main changes :
- BUG/MINOR: cli: Don't warn about a too big command for incomplete commands
- BUG/MINOR: listener: always assign distinct IDs to shards
- BUG/MINOR: log: fix lf_text_len() truncate inconsistency
- BUG/MINOR: tools/log: invalid encode_{chunk,string} usage
- BUG/MINOR: log: invalid snprintf() usage in sess_build_logline()
- CLEANUP: log: lf_text_len() returns a pointer not an integer
- MINOR: quic: simplify qc_send_hdshk_pkts() return
- MINOR: quic: uniformize sending methods for handshake
- MINOR: quic: improve sending API on retransmit
- MINOR: quic: use qc_send_hdshk_pkts() in handshake IO cb
- MEDIUM: quic: remove duplicate hdshk/app send functions
- OPTIM: quic: do not call qc_send() if nothing to emit
- OPTIM: quic: do not call qc_prep_pkts() if everything sent
- BUG/MEDIUM: http-ana: Deliver 502 on keep-alive for fressh server connection
- BUG/MINOR: http-ana: Fix TX_L7_RETRY and TX_D_L7_RETRY values
- BUILD: makefile: warn about unknown USE_* variables
- BUILD: makefile: support USE_xxx=0 as well
- BUG/MINOR: guid: fix crash on invalid guid name
- BUILD: atomic: fix peers build regression on gcc < 4.7 after recent changes
- BUG/MINOR: debug: make sure DEBUG_STRICT=0 does work as documented
- BUILD: cache: fix non-inline vs inline declaration mismatch to silence a warning
- BUILD: debug: make DEBUG_STRICT=1 the default
- BUILD: pools: make DEBUG_MEMORY_POOLS=1 the default option
- CI: update the build options to get rid of unneeded DEBUG options
- BUILD: makefile: get rid of the config CFLAGS variable
- BUILD: makefile: allow to use CFLAGS to append build options
- BUILD: makefile: drop the SMALL_OPTS settings
- BUILD: makefile: move -O2 from CPU_CFLAGS to OPT_CFLAGS
- BUILD: makefile: get rid of the CPU variable
- BUILD: makefile: drop the ARCH variable and better document ARCH_FLAGS
- BUILD: makefile: extract ARCH_FLAGS out of LDFLAGS
- BUILD: makefile: move the fwrapv option to STD_CFLAGS
- BUILD: makefile: make the ERR variable also support 0
- BUILD: makefile: add FAILFAST to select the -Wfatal-errors behavior
- BUILD: makefile: extract -Werror/-Wfatal-errors from automatic CFLAGS
- BUILD: makefile: split WARN_CFLAGS from SPEC_CFLAGS
- BUILD: makefile: rename SPEC_CFLAGS to NOWARN_CFLAGS
- BUILD: makefile: do not pass warnings to VERBOSE_CFLAGS
- BUILD: makefile: also drop DEBUG_CFLAGS
- CLEANUP: makefile: make the output of the "opts" target more readable
- DOC: install: clarify the build process by splitting it into subsections
- BUG/MINOR: server: fix slowstart behavior
- BUG/MEDIUM: cache/stats: Handle inbuf allocation failure in the I/O handler
- MINOR: ssl: add the section parser for 'crt-store'
- DOC: configuration: Add 3.12 Certificate Storage
- REGTESTS: ssl: test simple case of crt-store
- MINOR: ssl: rename ckchs_load_cert_file to new_ckch_store_load_files_path
- MINOR: ssl/crtlist: alloc ssl_conf only when a valid keyword is found
- BUG/MEDIUM: stick-tables: fix the task's next expiration date
- CLEANUP: stick-tables: always respect the to_batch limit when trashing
- BUG/MEDIUM: peers/trace: fix crash when listing event types
- BUG/MAJOR: stick-tables: fix race with peers in entry expiration
- DEBUG: pool: improve decoding of corrupted pools
- REORG: pool: move the area dump with symbol resolution to tools.c
- DEBUG: pools: report the data around the offending area in case of mismatch
- MINOR: listener/protocol: add proto name in alerts
- MINOR: proto_quic: add proto name in alert
- BUG/MINOR: lru: fix the standalone test case for invalid revision
- DOC: management: fix typos
- CI: revert kernel addr randomization introduced in 3a0fc864
- MINOR: ring: clarify the usage of ring_size() and add ring_allocated_size()
- BUG/MAJOR: ring: use the correct size to reallocate startup_logs
- MINOR: ring: always check that the old ring fits in the new one in ring_dup()
- CLEANUP: ssl: remove dead code in cfg_parse_crtstore()
- MINOR: ssl: supports crt-base in crt-store
- MINOR: ssl: 'key-base' allows to load a 'key' from a specific path
- MINOR: net_helper: Add support for floats/doubles.
- BUG/MEDIUM: grpc: Fix several unaligned 32/64 bits accesses
- MINOR: peers: Split resync process function to separate running/stopping states
- MINOR: peers: Add 2 peer flags about the peer learn status
- MINOR: peers: Add flags to report the peer state to the resync task
- MINOR: peers: sligthly adapt part processing the stopping signal
- MINOR: peers: Add functions to commit peer changes from the resync task
- BUG/MINOR: peers: Report a resync was explicitly requested from a thread-safe manner
- BUG/MAJOR: peers: Update peers section state from a thread-safe manner
- MEDIUM: peers: Only lock one peer at a time in the sync process function
- MINOR: peer: Restore previous peer flags value to ease debugging
- BUG/MEDIUM: stconn: Don't forward channel data if input data must be filtered
- BUILD: cache: fix a build warning with gcc < 7
- BUILD: xxhash: silence a build warning on Solaris + gcc-5.5
- CI: reduce ASAN log redirection umbrella size
- CLEANUP: assorted typo fixes in the code and comments
- BUG/MEDIUM: evports: do not clear returned events list on signal
- MEDIUM: evports: permit to report multiple events at once
- MEDIUM: ssl: support aliases in crt-store
- BUG/MINOR: ssl: check on forbidden character on wrong value
- BUG/MINOR: ssl: fix crt-store load parsing
- BUG/MEDIUM: applet: Fix applet API to put input data in a buffer
- BUG/MEDIUM: spoe: Always retry when an applet fails to send a frame
- BUG/MEDIUM: peers: Fix exit condition when max-updates-at-once is reached
- BUILD: linuxcap: Properly declare prepare_caps_from_permitted_set()
- BUG/MEDIUM: peers: fix localpeer regression with 'bind+server' config style
- MINOR: peers: stop relying on srv->addr to find peer port
- MEDIUM: ssl: support a named crt-store section
- MINOR: stats: remove implicit static trash_chunk usage
- REORG: stats: extract HTML related functions
- REORG: stats: extract JSON related functions
- MEDIUM: ssl: crt-base and key-base local keywords for crt-store
- MINOR: stats: Get the right prototype for stats_dump_html_end().
- MAJOR: ssl: use the msg callback mecanism for backend connections
- MINOR: ssl: implement keylog fetches for backend connections
- BUG/MINOR: stconn: Fix sc_mux_strm() return value
- MINOR: mux-pt: Test conn flags instead of sedesc ones to perform a full close
- MINOR: stconn/connection: Move shut modes at the SE descriptor level
- MINOR: stconn: Rewrite shutdown functions to simplify the switch statements
- MEDIUM: stconn: Use only one SC function to shut connection endpoints
- MEDIUM: stconn: Explicitly pass shut modes to shut applet endpoints
- MEDIUM: stconn: Use one function to shut connection and applet endpoints
- MEDIUM: muxes: Use one callback function to shut a mux stream
- BUG/MINOR: sock: handle a weird condition with connect()
- BUG/MINOR: fd: my_closefrom() on Linux could skip contiguous series of sockets
- BUG/MEDIUM: peers: Don't set PEERS_F_RESYNC_PROCESS flag on a peer
- BUG/MEDIUM: peers: Fix state transitions of a peer
- MINOR: init: use RLIMIT_DATA instead of RLIMIT_AS
- CI: modernize macos matrix
Limiting total allocatable process memory (VSZ) via setting RLIMIT_AS limit is
no longer effective, in order to restrict memory consumption at run time.
We can see from process memory map below, that there are many holes within
the process VA space, which bumps its VSZ to 1.5G. These holes are here by
many reasons and could be explaned at first by the full randomization of
system VA space. Now it is usually enabled in Linux kernels by default. There
are always gaps around the process stack area to trap overflows. Holes before
and after shared libraries could be explained by the fact, that on many
architectures libraries have a 'preferred' address to be loaded at; putting
them elsewhere requires relocation work, and probably some unshared pages.
Repetitive holes of 65380K are most probably correspond to the header that
malloc has to allocate before asked a claimed memory block. This header is
used by malloc to link allocated chunks together and for its internal book
keeping.
$ sudo pmap -x -p `pidof haproxy`
127136: ./haproxy -f /home/haproxy/haproxy/haproxy_h2.cfg
Address Kbytes RSS Dirty Mode Mapping
0000555555554000 388 64 0 r---- /home/haproxy/haproxy/haproxy
00005555555b5000 2608 1216 0 r-x-- /home/haproxy/haproxy/haproxy
0000555555841000 916 64 0 r---- /home/haproxy/haproxy/haproxy
0000555555926000 60 60 60 r---- /home/haproxy/haproxy/haproxy
0000555555935000 116 116 116 rw--- /home/haproxy/haproxy/haproxy
0000555555952000 7872 5236 5236 rw--- [ anon ]
00007fff98000000 156 36 36 rw--- [ anon ]
00007fff98027000 65380 0 0 ----- [ anon ]
00007fffa0000000 156 36 36 rw--- [ anon ]
00007fffa0027000 65380 0 0 ----- [ anon ]
00007fffa4000000 156 36 36 rw--- [ anon ]
00007fffa4027000 65380 0 0 ----- [ anon ]
00007fffa8000000 156 36 36 rw--- [ anon ]
00007fffa8027000 65380 0 0 ----- [ anon ]
00007fffac000000 156 36 36 rw--- [ anon ]
00007fffac027000 65380 0 0 ----- [ anon ]
00007fffb0000000 156 36 36 rw--- [ anon ]
00007fffb0027000 65380 0 0 ----- [ anon ]
...
00007ffff7fce000 4 4 0 r-x-- [ anon ]
00007ffff7fcf000 4 4 0 r---- /usr/lib/x86_64-linux-gnu/ld-2.31.so
00007ffff7fd0000 140 140 0 r-x-- /usr/lib/x86_64-linux-gnu/ld-2.31.so
...
00007ffff7ffe000 4 4 4 rw--- [ anon ]
00007ffffffde000 132 20 20 rw--- [ stack ]
ffffffffff600000 4 0 0 --x-- [ anon ]
---------------- ------- ------- -------
total kB 1499288 75504 72760
This exceeded VSZ makes impossible to start an haproxy process with 200M
memory limit, set at its initialization stage as RLIMIT_AS. We usually
have in this case such cryptic output at stderr:
$ haproxy -m 200 -f haproxy_quic.cfg
(null)(null)(null)(null)(null)(null)
At the same time the process RSS (a memory really used) is only 75,5M.
So to make process memory accounting more realistic let's base the memory
limit, set by -m option, on RSS measurement and let's use RLIMIT_DATA instead
of RLIMIT_AS.
RLIMIT_AS was used before, because earlier versions of haproxy always allocate
memory buffers for new connections, but data were not written there
immediately. So these buffers were not instantly counted in RSS, but were
always counted in VSZ. Now we allocate new buffers only in the case, when we
will write there some data immediately, so using RLIMIT_DATA becomes more
appropriate.
This patch implements the backend side of the keylog fetches.
The code was ready but needed the SSL message callbacks.
This could be used like this:
log-format "CLIENT_EARLY_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_client_early_traffic_secret]\n
CLIENT_HANDSHAKE_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_client_handshake_traffic_secret]\n
SERVER_HANDSHAKE_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_server_handshake_traffic_secret]\n
CLIENT_TRAFFIC_SECRET_0 %[ssl_bc_client_random,hex] %[ssl_bc_client_traffic_secret_0]\n
SERVER_TRAFFIC_SECRET_0 %[ssl_bc_client_random,hex] %[ssl_bc_server_traffic_secret_0]\n
EXPORTER_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_exporter_secret]\n
EARLY_EXPORTER_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_early_exporter_secret]"
Add support for crt-base and key-base local keywords for the crt-store.
current_crtbase and current_keybase are filed with a copy of the global
keyword argument when a crt-store is declared, and updated with a new
path when the keywords are in the crt-store section.
The ckch_conf_kws[] array was updated with ¤t_crtbase and
¤t_keybase instead of the global_ssl ones so the parser can use
them.
The keyword must be used before any "load" line in a crt-store section.
Example:
crt-store web
crt-base /etc/ssl/certs/
key-base /etc/ssl/private/
load crt "site3.crt" alias "site3"
load crt "site4.crt" key "site4.key"
frontend in2
bind *:443 ssl crt "@web/site3" crt "@web/site4.crt"
This patch introduces named crt-store section. A named crt-store allows
to add a scope to the crt name.
For example, a crt named "foo.crt" in a crt-store named "web" will
result in a certificate called "@web/foo.crt".
The crt-store load line now allows to put an alias. This alias is used
as the key in the ckch_tree instead of the certificate. This way an
alias can be referenced in the configuration with the '@/' prefix.
This can only be define with a crt-store.
The global 'key-base' keyword allows to read the 'key' parameter of a
crt-store load line using a path prefix.
This is the equivalent of the 'crt-base' keyword but for 'key'.
It only applies on crt-store.
Released version 3.0-dev7 with the following main changes :
- BUG/MINOR: ssl: Wrong ocsp-update "incompatibility" error message
- BUG/MINOR: ssl: Detect more 'ocsp-update' incompatibilities
- MEDIUM: ssl: Add 'tune.ssl.ocsp-update.mode' global option
- REGTESTS: ssl: Add OCSP update compatibility tests
- REGTESTS: ssl: Add functional test for global ocsp-update option
- BUG/MINOR: server: reject enabled for dynamic server
- BUG/MINOR: server: fix persistence cookie for dynamic servers
- MINOR: server: allow cookie for dynamic servers
- REGTESTS: Fix script about OCSP update compatibility tests
- BUG/MINOR: cli: Report an error to user if command or payload is too big
- MINOR: sc_strm: Add generic version to perform sync receives and sends
- MEDIUM: stream: Use generic version to perform sync receives and sends
- MEDIUM: buf: Add b_getline() and b_getdelim() functions
- MEDIUM: applet: Handle applets with their own buffers in put functions
- MEDIUM: cli/applet: Stop to test opposite SC in I/O handler of CLI commands
- MINOR: applet: Always use applet API to set appctx flags
- BUG/MEDIUM: applet: State appctx have more data if its EOI/EOS/ERROR flag is set
- MAJOR: cli: Update the CLI applet to handle its own buffers
- MINOR: applet: Let's applets .snd_buf function deal with full input buffers
- MINOR: stconn: Add a connection flag to notify sending data are the last ones
- MAJOR: cli: Use a custom .snd_buf function to only copy the current command
- DOC: config: balance 'first' not usable in LOG mode
- BUG/MINOR: log/balance: detect if user tries to use unsupported algo
- MINOR: lbprm: implement true "sticky" balance algo
- MEDIUM: log/balance: leverage lbprm api for log load-balancing
- BUG/BUILD: debug: fix unused variable error
- MEDIUM: lb-chash: Deterministic node hashes based on server address
- BUG/MEDIUM: stick-tables: fix a small remaining race in expiration task
- REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+ (4)
- REGTESTS: Remove REQUIRE_VERSION=1.9 from all tests (2)
- CLEANUP: Reapply ist.cocci (3)
- CLEANUP: Reapply strcmp.cocci (2)
- CLEANUP: Reapply xalloc_cast.cocci
- CLEANUP: Reapply ha_free.cocci
- CI: vtest: show coredumps if any
- REGTESTS: ssl: disable ssl/ocsp_auto_update.vtc
- BUG/MINOR: backend: properly handle redispatch 0
- MINOR: quic: HyStart++ implementation (RFC 9406)
- BUG/MEDIUM: stconn: Don't forward shutdown to SE if iobuf is not empty
- BUG/MEDIUM: stick-table: use the update lock when reading tables from peers
- BUG/MAJOR: applet: fix a MIN vs MAX usage in appctx_raw_rcv_buf()
- OPTIM: peers: avoid the locking dance around peer_send_teach_process_msgs()
- BUILD: quic: 32 bits compilation issue (QUIC_MIN() usage)
- BUG/MEDIUM: server/lbprm: fix crash in _srv_set_inetaddr_port()
- MEDIUM: mworker: get rid of libsystemd
- BUILD: systemd: fix build error on non-systemd systems with USE_SYSTEMD=1
- BUG/MINOR: bwlim/config: fix missing '\n' after error messages
- MINOR: stick-tables: mark the seen stksess with a flag "seen"
- OPTIM: stick-tables: check the stksess without taking the read lock
- MAJOR: stktable: split the keys across multiple shards to reduce contention
- CI: extend Fedora Rawhide, add m32 mode
- BUG/MINOR: stick-tables: Missing stick-table key nullity check
- BUILD: systemd: enable USE_SYSTEMD by default with TARGET=linux-glibc
- MINOR: systemd: Include MONOTONIC_USEC field in RELOADING=1 message
- BUG/MINOR: proxy: fix logformat expression leak in use_backend rules
- MEDIUM: log: rename logformat var to logformat tag
- MINOR: log: expose logformat_tag struct
- MEDIUM: log: carry tag context in logformat node
- MEDIUM: tree-wide: add logformat expressions wrapper
- MINOR: proxy: add PR_FL_CHECKED flag
- MAJOR: log: implement proper postparsing for logformat expressions
- MEDIUM: log: add compiling logic to logformat expressions
- MEDIUM: proxy/log: leverage lf_expr API for logformat preparsing
- MINOR: guid: introduce global UID module
- MINOR: guid: restrict guid format
- MINOR: proxy: implement GUID support
- MINOR: server: implement GUID support
- MINOR: listener: implement GUID support
- DOC: configuration: grammar fixes for strict-sni
- BUG/MINOR: init: relax LSTCHK_NETADM checks for non root
- MEDIUM: capabilities: check process capabilities sets
- CLEANUP: global: remove LSTCHK_CAP_BIND
- BUG/MEDIUM: quic: don't blindly rely on unaligned accesses
Since the Linux capabilities support add-on (see the commit bd84387beb
("MEDIUM: capabilities: enable support for Linux capabilities")), we can also
check haproxy process effective and permitted capabilities sets, when it
starts and runs as non-root.
Like this, if needed network capabilities are presented only in the process
permitted set, we can get this information with capget and put them in the
process effective set via capset. To do this properly, let's introduce
prepare_caps_from_permitted_set().
First, it checks if binary effective set has CAP_NET_ADMIN or CAP_NET_RAW. If
there is a match, LSTCHK_NETADM is removed from global.last_checks list to
avoid warning, because in the initialization sequence some last configuration
checks are based on LSTCHK_NETADM flag and haproxy process euid may stay
unpriviledged.
If there are no CAP_NET_ADMIN and CAP_NET_RAW in the effective set, permitted
set will be checked and only capabilities given in 'setcap' keyword will be
promoted in the process effective set. LSTCHK_NETADM will be also removed in
this case by the same reason. In order to be transparent, we promote from
permitted set only capabilities given by user in 'setcap' keyword. So, if
caplist doesn't include CAP_NET_ADMIN or CAP_NET_RAW, LSTCHK_NETADM would not
be unset and warning about missing priviledges will be emitted at
initialization.
Need to call it before protocol_bind_all() to allow binding to priviledged
ports under non-root and 'setcap cap_net_bind_service' must be set in the
global section in this case.
This commit is similar with the two previous ones. Its purpose is to add
GUID support on listeners. Due to bind_conf and listeners configuration,
some specifities were required.
Its possible to define several listeners on a single bind line, for
example by specifying multiple addresses. As such, it's impossible to
support a "guid" keyword on a bind line. The problem is exacerbated by
the cloning of listeners when sharding is used.
To resolve this, a new keyword "guid-prefix" is defined for bind lines.
It allows to specify a string which will be used as a prefix for
automatically generated GUID for each listeners attached to a bind_conf.
Automatic GUID listeners generation is implemented via a new function
bind_generate_guid(). It is called on post-parsing, after
bind_complete_thread_setup(). For each listeners on a bind_conf, a new
GUID is generated with bind_conf prefix and the index of the listener
relative to other listeners in the bind_conf. This last value is stored
in a new bind_conf field named <guid_idx>. If a GUID cannot be inserted,
for example due to a non-unique value, an error is returned, startup is
interrupted with configuration rejected.
This commit is similar to previous one, except that it implements GUID
support for server instances. A guid_node field is inserted into server
structure. A new "guid" server keyword is defined.
Implement proxy identiciation through GUID. As such, a guid_node member
is inserted into proxy structure. A proxy keyword "guid" is defined to
allow user to fix its value.
This is a simple algorithm to replace the classic slow start phase of the
congestion control algorithms. It should reduce the high packet loss during
this step.
Implemented only for Cubic.
Motivation: When services are discovered through DNS resolution, the order in
which DNS records get resolved and assigned to servers is arbitrary. Therefore,
even though two HAProxy instances using chash balancing might agree that a
particular request should go to server3, it is likely the case that they have
assigned different IPs and ports to the server in that slot.
This patch adds a server option, "hash-key <key>" which can be set to "id" (the
existing behaviour, default), "addr", or "addr-port". By deriving the keys for
the chash tree nodes from a server's address and port we ensure that independent
HAProxy instances will agree on routing decisions. If an address is not known
then the key is derived from the server's puid as it was previously.
When adjusting a server's weight, we now check whether the server's hash has
changed. If it has, we have to remove all its nodes first, since the node keys
will also have to change.
log load-balancing implementation was not seamlessly integrated within
lbprm API. The consequence is that it could become harder to maintain
over time since it added some specific cases just for the log backend.
Moreover, it resulted in some code duplication since balance algorithms
that are common to logs and regular (tcp, http) backends were specifically
rewritten for log backends.
Thanks to the previous commit, we now have all the prerequisites to make
log load-balancing fully leverage lbprm logic. Thus in this patch we make
__do_send_log_backend() use existing lbprm algorithms, and we no longer
require log-specific lbprm initialization in cfgparse.c and in
postcheck_log_backend().
As a bonus, for log backends this allows weighed algorithms to properly
support weights (ie: roundrobin, random and log-hash) since we now
leverage the same lb algorithms that we use for tcp/http backends
(doc was updated).
As previously mentioned in cd352c0db ("MINOR: log/balance: rename
"log-sticky" to "sticky""), let's define a sticky algorithm that may be
used from any protocol. Sticky algorithm sticks on the same server as
long as it remains available.
The documentation was updated accordingly.
b61147fd ("MEDIUM: log/balance: merge tcp/http algo with log ones")
introduced an ambiguity because 'first' algorithm is not usable in
LOG mode but it was not specified in the doc.
This should be backported in 2.9 with b61147fd.
This commit allows "cookie" keyword for dynamic servers. After code
review, nothing was found which could prevent a dynamic server to use
it. An extra warning is added under cli_parse_add_server() if cookie
value is ignored due to a non HTTP backend.
This patch is not considered a bugfix. However, it may backported if
needed as its impact seems minimal.
Since their first implementation, dynamic servers are created into
maintenance state. This has been done purposely to avoid immediate
activation of a newly inserted server.
However, this principle is incompatible if "enabled" keyword is used on
"add server". The newly created instance will be unreacheable as proxy
load-balancing algorithm is not informed of its presence via
srv_lb_propagate(). The new server could be unblocked by toggling its
state with "disable server" / "enable server" commands, which will
trigger srv_lb_propagate() invocation.
To avoid this unexpected state, simply forbid "enabled" keyword for
dynamic servers. In the long-term, it could be possible to re authorize
it but at least this requires to call srv_lb_propagate() on dynamic
server creation.
This should fix github issue #2497.
This patch should not be backported as-is, to avoid breaking dynamic
servers API on stable versions. "enabled" should instead be ignored for
them. This will be implemented in a dedicated patch on top of 2.9.
This option can be used to set a default ocsp-update mode for all
certificates of a given conf file. It allows to activate ocsp-update on
certificates without the need to create separate crt-lists. It can still
be superseded by the crt-list 'ocsp-update' option. It takes either "on"
or "off" as value and defaults to "off".
Since setting this new parameter to "on" would mean that we try to
enable ocsp-update on any certificate, and also certificates that don't
have an OCSP URI, the checks performed in ssl_sock_load_ocsp were
softened. We don't systematically raise an error when trying to enable
ocsp-update on a certificate that does not have an OCSP URI, be it via
the global option or the crt-list one. We will still raise an error when
a user tries to load a certificate that does have an OCSP URI but a
missing issuer certificate (if ocsp-update is enabled).
Released version 3.0-dev6 with the following main changes :
- MINOR: mux-h2: always use h2c_report_glitch()
- MEDIUM: mux-h2: allow to set the glitches threshold to kill a connection
- MINOR: quic: simplify rescheduling for handshake
- MINOR: quic: remove qc_treat_rx_crypto_frms()
- DOC: configuration: clarify ciphersuites usage (V2)
- MINOR: tools: use public interface for FreeBSD get_exec_path()
- BUG/MINOR: ssl: fix possible ctx memory leak in sample_conv_aes_gcm()
- BUG/MINOR: ssl: do not set the aead_tag flags in sample_conv_aes_gcm()
- BUG/MINOR: server: fix first server template not being indexed
- MEDIUM: ssl: initialize the SSL stack explicitely
- MEDIUM: ssl: allow to change the OpenSSL security level from global section
- CLEANUP: ssl: remove useless #ifdef in openssl-compat.h
- CI: github: add -DDEBUG_LIST to the default builds
- BUG/MINOR: hlua: segfault when loading the same filter from different contexts
- BUG/MINOR: hlua: missing lock in hlua_filter_new()
- BUG/MINOR: hlua: fix missing lock in hlua_filter_delete()
- DEBUG: lua: precisely identify if stream is stuck inside lua or not
- MINOR: hlua: use accessors for stream hlua ctx
- BUG/MEDIUM: hlua: streams don't support mixing lua-load with lua-load-per-thread (2nd try)
- MINOR: debug: enable insecure fork on the command line
- CI: github: add -dI to haproxy arguments
- BUG/MINOR: listener: Wake proxy's mngmt task up if necessary on session release
- BUG/MINOR: listener: Don't schedule frontend without task in listener_release()
- MINOR: session: rename private conns elements
- BUG/MAJOR: server: do not delete srv referenced by session
- BUG/MEDIUM: spoe: Don't rely on stream's expiration to detect processing timeout
- BUG/MINOR: spoe: Be sure to be able to quickly close IDLE applets on soft-stop
- MAJOR: spoe: Deprecate the SPOE filter
- MINOR: cfgparse: Add a global option to expose deprecated directives
- MINOR: spoe: Add SPOE filters in the exposed deprecated directives
- CLEANUP: assorted typo fixes in the code and comments
- CI: temporarily adjust kernel entropy to work with ASAN/clang
- BUG/MEDIUM: spoe: Return an invalid frame on recv if size is too small
- BUG/MINOR: session: ensure conn owner is set after insert into session
- BUG/MEDIUM: http_ana: ignore NTLM for reuse aggressive/always and no H1
- BUG/MAJOR: connection: fix server used_conns with H2 + reuse safe
- BUG/MAJOR: ocsp: Separate refcount per instance and per store
- REGTESTS: ssl: Add OCSP related tests
- BUG/MEDIUM: ssl: Fix crash when calling "update ssl ocsp-response" when an update is ongoing
- BUG/MEDIUM: ssl: Fix crash in ocsp-update log function
- MEDIUM: ssl: Change output of ocsp-update log
- MINOR: ssl: Change level of ocsp-update logs
- CLEANUP: ssl: Remove undocumented ocsp fetches
- REGTESTS: ssl: Add checks on ocsp-update log format
- MINOR: connection: implement conn_release()
- MINOR: connection: extend takeover with release option
- MEDIUM: server: close idle conn on server deletion
- MEDIUM: mux: prepare for takeover on private connections
- MEDIUM: server: close private idle connection before server deletion
- BUG/MINOR: mux-quic: close all QCS before freeing QCC tasklet
- BUG/MEDIUM: mux-fcgi: Properly handle EOM flag on end-of-trailers HTX block
- BUILD: server: fix build regression on old compilers (<= gcc-4.4)
- OPTIM: http_ext: avoid useless copy in http_7239_extract_{ipv4,ipv6}
- MINOR: debug: add "debug dev trace" to flood with traces
- MINOR: atomic: add a read-specific variant of __ha_cpu_relax()
- MINOR: applet: add new function applet_append_line()
- MINOR: log/applet: add new function syslog_applet_append_event()
- MEDIUM: ring/sink: use applet_append_line()/syslog_applet_append_event() for readers
- REORG: dns/ring: split the ring between the generic one and the DNS one
- MEDIUM: ring: move the ring reader code to ring_dispatch_messages()
- MEDIUM: sink: move the generic ring forwarder code use ring_dispatch_messages()
- MEDIUM: log/sink: make the log forwarder code use ring_dispatch_messages()
- MINOR: buf: add b_add_ofs() to add a count to an absolute position
- MINOR: buf: add b_rel_ofs() to turn an absolute offset into a relative one
- MINOR: buf: add b_putblk_ofs() to copy a block at a specific position
- MINOR: buf: add b_getblk_ofs() that works relative to area and not head
- MINOR: ring: make the ring reader use only absolute offsets
- MINOR: ring: reserve one special value for the readers count
- MINOR: vecpair: add new vector pair based data manipulation mechanisms
- MINOR: vecpair: add necessary functions to use vecpairss from/to ring APIs
- MINOR: ring: rename totlen vs msglen in ring_write()
- MINOR: ring: add ring_data() to report the amount of data in a ring
- MINOR: ring: add ring_size() to return the ring's size
- MINOR: ring: add ring_dup() to copy a ring into another one
- MINOR: ring: also add ring_area(), ring_head(), ring_tail()
- MINOR: ring: make callers use ring_data() and ring_size(), not ring->buf
- MINOR: errors: use ring_dup() to duplicate the startup_logs
- MINOR: ring: use ring_size(), ring_area(), ring_head() and ring_tail()
- MINOR: ring: add a flag to indicate a mapped file
- MAJOR: ring: insert an intermediary ring_storage level
- MINOR: ring: resize only under thread isolation
- MINOR: ring: allow to reduce a ring size
- MEDIUM: ring: replace the buffer API in ring_write() with the vec<->ring API
- MEDIUM: ring: change the ring reader to use the new vector-based API now
- MEDIUM: ring: remove the struct buffer from the ring
- MEDIUM: ring: align the head and tail fields in the ring_storage structure
- MINOR: ring: make the reader check the readers count before inc/dec
- MEDIUM: ring: lock the tail's readers counters before proceeding with the changes
- MEDIUM: ring: protect the reader's positions against writers
- MEDIUM: ring: use the topmost bit of the tail as a lock
- MEDIUM: move the ring's lock to only protect the readers list
- MEDIUM: ring: unlock the ring's tail earlier
- MINOR: ring: don't take the readers lock if there are no readers
- MEDIUM: ring/applet: turn the wait_entry list to an mt_list instead
- MEDIUM: ring: protect the initialization of the initial reader offset
- MINOR: ring: make sure ring_dispatch waits when facing a changing message
- MAJOR: ring: drop the now unneeded lock
- OPTIM: ring: don't even try to update offset when failed to read
- OPTIM: ring: have only one thread at a time wake up all readers
- MINOR: ring: keep a few frequently used pointers in the local stack
- MINOR: ring: add the definition of a ring waiting cell
- MINOR: ring: make the number of queues configurable
- MAJOR: ring: implement a waiting queue in front of the ring
- MEDIUM: ring: significant boost in the loop by checking the ring queue ptr first
- MEDIUM: ring: improve speed in the queue waiting loop on x86_64
- MINOR: ring: simplify the write loop a little bit
- CLEANUP: ring: further simplify the write loop
- MINOR: ring: it's not x86 but all non-ARMv8.1 which needs the read before OR
- MINOR: ring: avoid writes to cells during copy
- OPTIM: ring: use relaxed stores to release the threads
- CLEANUP: ring: use only curr_cell and not next_cell in the main write loop
- BUILD: ssl: fix build error on older compilers with openssl-3.2
- BUG/MINOR: server: 'source' interface ignored from 'default-server' directive
- BUG/MAJOR: ring: free the ring storage not the ring itself when using maps
Now the rings have one wait queue per group. This should limit the
contention on systems such as EPYC CPUs where the performance drops
dramatically when using more than one CCX.
Tests were run with different numbers and it was showed that value
6 outperforms all other ones at 12, 24, 48, 64 and 80 threads on an
EPYC, a Xeon and an Ampere CPU. Value 7 sometimes comes close and
anything around these values degrades quickly. The value has been
left tunable in the global section.
This commit only introduces everything needed to set up the queue count
so that it's easier to adjust it in the forthcoming patches, but it was
initially added after the series, making it harder to compare.
It was also shown that trying to group the threads in queues by their
thread groups is counter-productive and that it was more efficient to
do that by applying a modulo on the thread number. As surprising as it
seems, it does have the benefit of well balancing any number of threads.
Since commit "BUG/MEDIUM: ssl: Fix crash in ocsp-update log function",
some information from the log line are "faked" because they can be
actually retrieved anymore (or never could). We should then remove them
from the logline all along instead of providing some useless fields.
We then only keep pure OCSP-update information in the log line:
"<certname> <status> <status str> <fail count> <success count>"
Backend connections can be marked as private to prevent their sharing by
multiple clients. Now, this has become an exception as only two reasons
for data traffic can trigger this (checks are ignored here) :
* http-reuse never
* HTTP response with NTLM header
The first case is easy to manage as the connection is flagged as private
since its inception. However, the second case is dynamic as the
connection can be flagged anytime during its lifetime. When using a
backend protocol such as HTTP/2 with reuse mode aggressive or always, we
face a design issue as the connection would be marked as private,
despite potentially being shared by several clients at the same time.
This is conceptually invalid, but worst it can trigger crashes on MUX
stream detach callback depending on the order of release of the streams,
by calling session_check_idle_conn() with a NULL session. It could also
be possible to have several NTLM responses on a single connection for
different sessions. In this case, connection owner is still being
updated without attaching the connection to its correct session, which
ultimately would cause a crash on session_check_idle_conn with an
invalid session.
Here are two backtrace examples from GDB for such cases :
Thread 1 (Thread 0x7ff73e9fc700 (LWP 648859)):
#0 session_check_idle_conn (conn=0x7ff72f597800, sess=0x0) at include/haproxy/session.h:209
#1 h2_detach (sd=<optimized out>) at src/mux_h2.c:4520
#2 0x000056151742be24 in sc_detach_endp (scp=scp@entry=0x7ff73e9f0f18) at src/stconn.c:376
#3 0x000056151742c208 in sc_destroy (sc=<optimized out>) at src/stconn.c:444
#4 0x0000561517370871 in stream_free (s=s@entry=0x7ff72a2dbd80) at src/stream.c:728
#5 0x000056151737541f in process_stream (t=t@entry=0x7ff72d5e2620, context=0x7ff72a2dbd80, state=<optimized out>) at src/stream.c:2645
#6 0x0000561517456cbb in run_tasks_from_lists (budgets=budgets@entry=0x7ff73e9f10d0) at src/task.c:632
#7 0x00005615174576b9 in process_runnable_tasks () at src/task.c:876
#8 0x000056151742275a in run_poll_loop () at src/haproxy.c:2996
#9 0x0000561517422db1 in run_thread_poll_loop (data=<optimized out>) at src/haproxy.c:3195
#10 0x00007ff789e081ca in start_thread () from /lib64/libpthread.so.0
#11 0x00007ff789a39e73 in clone () from /lib64/libc.so.6
(gdb)
Thread 1 (Thread 0x7ff52e7fc700 (LWP 681458)):
#0 0x0000556ebd6e7e69 in session_check_idle_conn (conn=0x7ff5787ff100, sess=0x7ff51d2539a0) at include/haproxy/session.h:209
#1 h2_detach (sd=<optimized out>) at src/mux_h2.c:4520
#2 0x0000556ebd7f3e24 in sc_detach_endp (scp=scp@entry=0x7ff52e7f0f18) at src/stconn.c:376
#3 0x0000556ebd7f4208 in sc_destroy (sc=<optimized out>) at src/stconn.c:444
#4 0x0000556ebd738871 in stream_free (s=s@entry=0x7ff520e28200) at src/stream.c:728
#5 0x0000556ebd73d41f in process_stream (t=t@entry=0x7ff565783700, context=0x7ff520e28200, state=<optimized out>) at src/stream.c:2645
#6 0x0000556ebd81ecbb in run_tasks_from_lists (budgets=budgets@entry=0x7ff52e7f10d0) at src/task.c:632
#7 0x0000556ebd81f6b9 in process_runnable_tasks () at src/task.c:876
#8 0x0000556ebd7ea75a in run_poll_loop () at src/haproxy.c:2996
#9 0x0000556ebd7eadb1 in run_thread_poll_loop (data=<optimized out>) at src/haproxy.c:3195
#10 0x00007ff5752081ca in start_thread () from /lib64/libpthread.so.0
#11 0x00007ff574e39e73 in clone () from /lib64/libc.so.6
(gdb)
To solve this issue, simply ignore NTLM responses when using a
multiplexer with streams support and the connection is not already
attached to the session. The connection is not marked as private and
will continue to be shared freely accross clients. This is considered
conceptually valid as NTLM usage (rfc 4559) with HTTP is broken and was
designed only with HTTP/1.1 in mind. A side-effect of the change is that
SESS_FL_PREFER_LAST is also not set anymore on NTLM detection, which
allows following requests to be load-balanced accross several server
instances.
The original behavior is kept for HTTP/1 or if the connection is already
attached to the session. This last case happens when using HTTP/2 with
default http-reuse safe mode since the following patch :
0d21deaded
MEDIUM: backend: add reused conn to sess if mux marked as HOL blocking
This should be backported up to all stable releases. Up until 2.4, it
can be taken as-is. For lesser versions, above patch is not present. In
this case the condition should be restricted only to HTTP/1 usage :
if (srv_conn && strcmp(srv_conn->mux->name, "H1") == 0) {
It is the first deprecated directive exposed via the
'expose-deprecated-directives' global option. This way, it is possible to
silent the warning about the SPOE uses.
Similarly to "expose-exprimental-directives" option, there is no a global
option to expose some deprecated directives. Idea is to have a way to silent
warnings about deprecated directives when there is no alternative solution.
Of course, deprecated directives covered by this option are not listed and
may change. It is only a best effort to let users upgrade smoothly.
As announced on the ML few weeks (months ?) ago and on several GH issues,
the SPOE is now deprecated. Sadly, this filter should be refactored to work
properly. It was implemented as a functionnal PoC for the 1.7 and since
then, no time was invest to improve it and make it truly maintainable in
time. Worst, other parts of HAProxy evolve, especially applets part, making
maintenance ever more expensive.
Instead of keeping the SPOE filter in a this state and always reply to users
encountering issues or limitations that it is far from perfect but we cannot
work on it for now, we decided to deprecate it.
We can still change our mind before the 3.0.0 release if the situation
evolves. Otherwise the filter will be removed or marked as unmaintained for
the 3.1. If the situation does not change, it means the 3.0 will be the last
version with a true SPOE support.
-dI allow to enable "insure-fork-wanted" directly from the command line,
which is useful when you want to run ASAN with addr2line with a lot of
configuration files without editing them.
The new "ssl-security-level" option allows one to change the OpenSSL
security level without having to change the openssl.cnf global file of
your distribution. This directives applies on every SSL_CTX context.
People sometimes change their security level directly in the ciphers
directive, however there are some cases when the security level change
is not applied in the right order (for example when applying a DH
param).
Before this patch, it was to possible to trick by using a specific
openssl.cnf file and start haproxy this way:
OPENSSL_CONF=./openssl.cnf ./haproxy -f bug-2468.cfg
Values for the security level can be found there:
https://www.openssl.org/docs/man1.1.1/man3/SSL_CTX_set_security_level.html
This was discussed in github issue #2468.
The previous attempt removed the TLSv1.3 version for the
"ciphersuites" keywords. However it looks like the TLSv1.2 support for
SSL_CTX_set_ciphersuites() is a bug, and can have inconsistent behavior.
This patch revert the previous attempt and add explaining about this
problem and clear examples on how to configure TLSv1.2 ciphers + TLSv1.3
ciphersuites.
Revert "DOC: configuration: clarify ciphersuites usage"
This reverts commit e2a44d6c94.
This must be backported to all stable branches.
Fixes issue #2459.
Till now it was still needed to write rules to eliminate bad behaving
H2 clients, while most of the time it would be desirable to just be able
to set a threshold on the level of anomalies on a connection.
This is what this patch does. By setting a glitches threshold for frontend
and backend, it allows to automatically turn a connection to the error
state when the threshold is reached so that the connection dies by itself
without having to write possibly complex rules.
One subtlety is that we still have the error state being exclusive to the
parser's state so this requires the h2c_report_glitches() function to return
a status indicating if the threshold was reached or not so that processing
can instantly stop and bypass the state update, otherwise the state could
be turned back to a valid one (e.g. after parsing CONTINUATION); we should
really contemplate the possibility to use H2_CF_ERROR for this. Fortunately
there were very few places where a glitch was reported outside of an error
path so the changes are quite minor.
Now by setting the front value to 1000, a client flooding with short
CONTINUATION frames is instantly stopped.
Released version 3.0-dev5 with the following main changes :
- BUG/MEDIUM: applet: Fix HTX .rcv_buf callback function to release outbuf buffer
- BUG/MAJOR: ssl/ocsp: crash with ocsp when old process exit or using ocsp CLI
- BUG/MEDIUM: server: fix dynamic servers initial settings
- BUG/MINOR: ssl/cli: duplicate cleaning code in cli_parse_del_crtlist
- LICENSE: event_hdl: fix GPL license version
- LICENSE: http_ext: fix GPL license version
- BUG/MEDIUM: mux-h1: Fix again 0-copy forwarding of chunks with an unknown size
- BUG/MINOR: mux-h1: Properly report when mux is blocked during a nego
- MINOR: mux-h1: Move checks performed before a shutdown in a dedicated function
- MINOR: mux-h1: Move all stuff to detach a stream in an internal function
- MAJOR: mux-h1: Drain requests on client side before shut a stream down
- MEDIUM: htx/http-ana: No longer close connection on early HAProxy response
- MINOR: quic: filter show quic by address
- MINOR: quic: specify show quic output fields
- MINOR: quic: add MUX output for show quic
- CLEANUP: mux-h2: Fix h2s_make_data() comment about the return value
- DOC: configuration: clarify ciphersuites usage
- BUG/MINOR: config/quic: Alert about PROXY protocol use on a QUIC listener
- BUG/MINOR: hlua: Fix log level to the right value when set via TXN:set_loglevel
- MINOR: hlua: Be able to disable logging from lua
- BUG/MINOR: tools: seed the statistical PRNG slightly better
- BUG/MINOR: hlua: fix unsafe lua_tostring() usage with empty stack
- BUG/MINOR: hlua: don't use lua_tostring() from unprotected contexts
- BUG/MINOR: hlua: fix possible crash in hlua_filter_new() under load
- BUG/MINOR: hlua: improper lock usage in hlua_filter_callback()
- BUG/MINOR: hlua: improper lock usage in hlua_filter_new()
- BUG/MEDIUM: hlua: improper lock usage with SET_SAFE_LJMP()
- BUG/MAJOR: hlua: improper lock usage with hlua_ctx_resume()
- BUG/MINOR: hlua: don't call ha_alert() in hlua_event_subscribe()
- MINOR: hlua: use SEND_ERR to report errors in hlua_event_runner()
- CLEANUP: hlua: txn class functions may LJMP
- BUG/MINOR: sink: fix a race condition in the TCP log forwarding code
- BUILD: thread: move lock label definitions to thread-t.h
- BUILD: tree-wide: fix a few missing includes in a few files
- BUILD: buf: make b_ncat() take a const for the source
- CLEANUP: assorted typo fixes in the code and comments
- CLEANUP: fix typo in naming for variable "unused"
- CI: run more smoke tests on config syntax to check memory related issues
- CI: enable monthly build only test on netbsd-9.3
- CI: skip scheduled builds on forks
- BUG/MINOR: ssl/cli: typo in new ssl crl-file CLI description
- BUG/MEDIUM: quic: fix connection freeze on post handshake
- BUG/MINOR: mux-quic: fix crash on aborting uni remote stream
- CLEANUP: log: fix obsolete comment for add_sample_to_logformat_list()
- CLEANUP: tree-wide: use proper ERR_* return values for PRE_CHECK fcts
- BUG/MINOR: cfgparse: report proper location for log-format-sd errors
- MINOR: vars: export var_set and var_unset functions
- MINOR: Add aes_gcm_enc converter
- BUG/MEDIUM: quic: fix handshake freeze under high traffic
- MINOR: quic: always use ncbuf for rx CRYPTO
- BUILD: ssl: define EVP_CTRL_AEAD_GET_TAG for older versions
- DOC: design: write first notes about ring-v2
- OPTIM: sink: try to merge "dropped" messages faster
- OPTIM: sink: drop the sink lock used to count drops
- DEV: haring: make haring not depend on the struct ring itself
- DEV: haring: split the code between ring and buffer
- DEV: haring: automatically use the advertised ring header size
- BUILD: solaris: fix compilation errors
The converter can be used to encrypt the raw byte input using the
AES-GCM algorithm, using provided nonce and key.
Co-authored-by: Dragan Dosen (ddosen@haproxy.com)
This is 39th iteration of typo fixes
The naming issue on the argument called "unsued" instead of "unused"
in two functions from resolvers and stick-tables was put into a second
patch so that it can be omitted if it were to cause backport issues.
Add core.silent (-1) value to be able to disable logging via
TXN:set_loglevel() call. Otherwise, there is no way to do so and it may be
handy. This special value cannot be used with TXN:log() function.
This patch may be backported if necessary.
Ciphersuites can be used with any TLS/SSL protocol version and are not
specific to TLSv1.3. However you can only specify the TLSv1.3 ciphers in
ciphersuite format.
Should fix issue #2459.
Backport to every stable branches.
Extend "show quic" to be able to dump MUX related information. This is
done via the new function qcc_show_quic(). This replaces the old streams
dumping list which was incomplete.
These info are displayed on full output or by specifying "mux" field.
Add the possibility to customize show quic full output with only a
specific set of printed fields. This is specified as a comma-separated
list. Here are the currently supported values :
* tp: transport parameters
* sock: connection addresses and socket FD
* pktns: packet number space with ack ranges and in flight bytes
* cc: congestion controler and loss information
Note that streams output is not filtered by this mechanism. It's because
it will be replaced soon by an output generated from the MUX which will
use its owned field name.
Add the possibilty to restrict show quic output to only a single
connection. This is done by specifying a quic_conn address pointer.
Default format selection has evolved with it. Indeed, it seems more
fitting to use full format by default when filtering on a connection.
However, it's still possible to revert to the original oneline format
with it by specifying it explicitely.
Released version 3.0-dev4 with the following main changes :
- BUG/MEDIUM: ssl: Fix crash when calling "update ssl ocsp-response" when an update is ongoing
- BUG/MEDIUM: quic: Wrong K CUBIC calculation.
- MINOR: quic: Update K CUBIC calculation (RFC 9438)
- MINOR: quic: Dynamic packet reordering threshold
- MINOR: quic: Add a counter for reordered packets
- BUG/MAJOR: mux-h1: Fix zero-copy forwarding when sending chunks of unknown size
- MINOR: stats: Use a dedicated function to check if output is almost full
- BUG/MEDIUM: applet: Add a flag to state an applet is using zero-copy forwarding
- BUG/MEDIUM: stconn/applet: Block 0-copy forwarding if producer needs more room
- MINOR: applet: Remove uselelss test on SE_FL_SHR/SHW flags
- MEDIUM: applet: Add notion of shutdown for write for applets
- MINOR: cli: No longer check SC for shutdown to interrupt wait command
- BUG/MEDIUM: stconn: Allow expiration update when READ/WRITE event is pending
- BUG/MEDIUM: stconn: Don't check pending shutdown to wake an applet up
- CLEANUP: stconn: Move SE flags set by app layer at the end of the bitfield
- MINOR: stconn: Rename SE_FL_MAY_FASTFWD and reorder bitfield
- MINOR: stconn: Add SE flag to announce zero-copy forwarding on consumer side
- MINOR: muxes: Announce support for zero-copy forwarding on consumer side
- BUG/MAJOR: stconn: Check support for zero-copy forwarding on both sides
- MINOR: muxes/applet: Simplify checks on options to disable zero-copy forwarding
- BUG/MINOR: quic: reject unknown frame type
- MINOR: quic: handle all frame types on reception
- BUG/MINOR: quic: reject HANDSHAKE_DONE as server
- BUG/MINOR: qpack: reject invalid increment count decoding
- BUG/MINOR: qpack: reject invalid dynamic table capacity
- DOC/MINOR: userlists: mention solutions to high cpu with hashes
- DOC: quic: Missing tuning setting in "Global parameters"
- BUG/MEDIUM: applet: Immediately free appctx on early error
- BUG/MEDIUM: hlua: Be able to garbage collect uninitialized lua sockets
- BUG/MEDIUM: hlua: Don't loop if a lua socket does not consume received data
- BUG/MEDIUM: quic: fix transient send error with listener socket
- MINOR: log: custom name for logformat node
- MINOR: sample: add type_to_smp() helper function
- MINOR: log: explicit typecasting for logformat nodes
- MINOR: log: simplify last_isspace in sess_build_logline()
- MINOR: log: simplify quotes handling in sess_build_logline()
- MINOR: log: print metadata prefixes separately in sess_build_logline()
- MINOR: log: automate string array construction in sess_build_logline()
- DOC: quic: fix recommandation for bind on multiple address
- MINOR: quic: warn on bind on multiple addresses if no IP_PKTINFO support
- OPTIM: quic: improve slightly qc_snd_buf() internal
- MINOR: quic: move IP_PKTINFO on send on a dedicated function
- MINOR: quic: remove sendto() usage variant
- MINOR: quic: only use sendmsg() syscall variant
- BUILD: applet: fix build on some 32-bit archs
- BUG/MINOR: quic: initialize msg_flags before sendmsg
- BUG/MEDIUM: mux-h1: Don't emit 0-CRLF chunk in h1_done_ff() when iobuf is empty
- CLEANUP: proxy/log: remove unused proxy flag
- CLEANUP: log: fix process_send_log() indentation
- CLEANUP: log: use free_logformat_list() in parse_logformat_string()
- MINOR: log: add free_logformat_node() helper function
- BUG/MINOR: log: fix potential lf->name memory leak
- BUG/MINOR: ist: allocate nul byte on istdup
- BUG/MINOR: stats: drop srv refcount on early release
- BUG/MAJOR: promex: fix crash on deleted server
- BUG/MAJOR: server: fix stream crash due to deleted server
- BUG/MEDIUM: mux-quic: do not crash on qcs_destroy for connection error
- MINOR: cli: Remove useless loop on commands to find unescaped semi-colon
- BUG/MEDIUM: cli: Warn if pipelined commands are delimited by a \n
- BUG/MAJOR: cli: Restore non-interactive mode behavior with pipelined commands
- BUG/MINOR: quic: fix output of show quic
- MINOR: ssl: Call callback function after loading SSL CRL data
- BUG/MINOR: ist: only store NUL byte on succeeded alloc
Documentation falsely mentions that binding on multiple addresses is
forbidden for QUIC listeners. This is not the case. Moreover, this
behavior is reliable when using destination address retrieval on receive
via IP_PKTINFO, which allows to determine the proper source address for
response.
This should be backported up to 2.7. On 2.6 specific source address
definition on sendmsg via IP_PKTINFO is not implemented. As such, bind
on multiple addresses should remain forbidden for this release.
Should have come with this previous commit:
MINOR: quic: Add a counter for reordered packets
Must be backported where the previous commit was backported.
This change adds a paragraph to the documentation regarding "userlists"
and the use of hashed password value.
It indicates what a user can do to address the high CPU cost of
having to calculate the hash at each request, such as reducing the
number of rounds or the cost complexity, if the algorithm allows for it.
I believe it is necessary to mention how the musl C library
impacts performance of hashing functions, as this has already led to a
few issues:
https://github.com/haproxy/haproxy/issues/1298https://github.com/haproxy/haproxy/issues/2008https://github.com/haproxy/haproxy/issues/2251
The performance impact is significant enough to mention it.
Acked-by: Lukas Tribus <lukas@ltri.eu>
Let's say that the largest packet number acknowledged by the peer is #10, when inspecting
the non already acknowledged packets to detect if they are lost or not, this is the
case a least if the difference between this largest packet number and and their
packet numbers are bigger or equal to the packet reordering threshold as defined
by the RFC 9002. This latter must not be less than QUIC_LOSS_PACKET_THRESHOLD(3).
Which such a value, packets #7 and oldest are detected as lost if non acknowledged,
contrary to packet number #8 or #9.
So, the packet loss detection is very sensitive to such a network characteristic
where non acknowledged packets are distant from each others by their packet number
differences.
Do not use this static value anymore for the packet reordering threshold which is used
as a criteria to detect packet loss. In place, make it depend on the difference
between the number of the last transmitted packet and the number of the oldest
one among the packet which are still in flight before being inspected to be
deemed as lost.
Add new tune.quic.reorder-ratio setting to apply a ratio in percent to this
dynamic packet reorder threshold.
Should be backported to 2.6.
Released version 3.0-dev3 with the following main changes :
- DOC: configuration: clarify http-request wait-for-body
- BUG/MAJOR: ssl_sock: Always clear retry flags in read/write functions
- MINOR: h3: add traces for stream sending function
- BUG/MEDIUM: h3: do not crash on invalid response status code
- BUG/MEDIUM: qpack: allow 6xx..9xx status codes
- BUG/MEDIUM: quic: fix crash on invalid qc_stream_buf_free() BUG_ON
- CLEANUP: log: deinitialization of the log buffer in one function
- BUG/MINOR: h1: Don't support LF only at the end of chunks
- BUG/MEDIUM: h1: Don't support LF only to mark the end of a chunk size
- MINOR: ssl: add HAVE_SSL_0RTT constant
- MINOR: ssl: rename HA_OPENSSL_HAVE_0RTT_SUPPORT constant to HAVE_SSL_0RTT_QUIC
- MEDIUM: ssl/quic: always compile the ssl_conf.early_data test
- DOC: httpclient: add dedicated httpclient section
- BUG/MINOR: h1-htx: properly initialize the err_pos field
- BUG/MEDIUM: h1: always reject the NUL character in header values
- CLEANUP: h1: remove unused function h1_measure_trailers()
- BUG/MINOR: ssl/quic: fix 0RTT define
- MINOR: mux-quic: prepare for earlier flow control update
- MINOR: mux-quic: define a flow control related type
- MEDIUM: mux-quic: limit stream flow control on snd_buf
- MEDIUM: mux-quic: limit conn flow control on snd_buf
- MINOR: mux-quic: remove unneeded sent-offset fields
- MINOR: mux-quic: check fctl during STREAM frame build
- MAJOR: mux-quic: remove intermediary Tx buffer
- MEDIUM: mux-quic: simplify sending API
- MEDIUM: mux-quic: release Tx buf on too small room
- MEDIUM: mux-quic: properly handle conn Tx buf exhaustion
- MINOR: mux-quic: realign Tx buffer if possible
- CLEANUP: connection: remove obsolete comment in header file
- OPTIM: connection: progressive hash for conn_calculate_hash()
- MINOR: tcp_act: fix alphabetical ordering of tcp request content actions
- MINOR: tcp-act: Rename "set-{mark,tos}" to "set-fc-{mark,tos}"
- MINOR: hlua: Rename set_{tos, mark} to set_fc_{tos, mark}
- MEDIUM: tcp-act: <expr> support for set-fc-{mark,tos} actions
- MEDIUM: tcp-act/backend: support for set-bc-{mark,tos} actions
- MINOR: stats: Be able to access to registered stats modules from anywhere
- MEDIUM: stats: Be able to access a specific field into a stats module
- MINOR: promex: Add a param to override the description when a metric is dumped
- MINOR: promex: Add info in the promex context to dump extra counters
- MEDIUM: promex: Dump frontends extra counters if requested
- MEDIUM: promex: Dump backends extra counters if requested
- MEDIUM: promex: Dump servers extra counters if requested
- MEDIUM: promex: Dump listeners extra counters if requested
- DOC: promex: Add documentation about extra-counters
- MINOR: promex: Always limit the number of labels dumped for each metric
- MEDIUM: promex: Simplify the context using generic pointers for restart points
- MINOR: promex: Remove unsued htx parameter when a metric is dumped
- MEDIUM: promex: Add a registration mechanism to support modules
- MEDIUM: promex: Dump metrics of registered modules with a way to filter them
- MEDIUM: promex/stick-table: Dump stick-table metrics via a promex module
- MEDIUM: promex/resolvers: Dump resolvers metrics via a promex module
- MINOR: promex: Rename dump functions to use the right wording
- MINOR: promex: Always pass the final name and description to promex_dmp_ts()
- MEDIUM: promex: Add support for filters on metric names
- REGTESTS: promex: Adapt script to be less verbose
- MINOR: compiler: add a new DO_NOT_FOLD() macro to prevent code folding
- MINOR: debug: make sure calls to ha_crash_now() are never merged
- MINOR: debug: make ABORT_NOW() store the caller's line number when using abort
- BUG/MINOR: diag: always show the version before dumping a diag warning
- BUG/MINOR: diag: run the final diags before quitting when using -c
- MINOR: acl: add extra diagnostics about suspicious string patterns
- BUG/MINOR: quic: Wrong ack ranges handling when reaching the limit.
- BUILD: quic: Variable name typo inside a BUG_ON().
- DOC: config: fix typo for '%ms' log format alternative
- DOC: config: fix ordering for "txn.*" fetches
- MINOR: stream: add "txn.redispatch" fetch
- BUILD: debug: remove leftover parentheses in ABORT_NOW()
- MINOR: debug: make BUG_ON() catch build errors even without DEBUG_STRICT
- BUG/MINOR: ssl: Fix error message after ssl_sock_load_ocsp call
- MINOR: debug: support passing an optional message in ABORT_NOW()
- MINOR: debug: add an optional message argument to the BUG_ON() family
- DEBUG: make the "debug dev {debug|warn|check}" command print a message
- CLEANUP: quic: Code clarifications for QUIC CUBIC (RFC 9438)
- BUG/MINOR: quic: fix possible integer wrap around in cubic window calculation
- MINOR: quic: Stop using 1024th of a second.
- CI: github: abandon asan matrix.py helper
- CI: ssl: add yet another OpenSSL download fallback
- DOC: install: clarify WolfSSL chroot requirements
- MINOR: task: Move wait_event in the task header file
- MINOR: stconn: Be able to detect applets using HTX
- MINOR: stconn: Explicitly use an appctx to attach a stconn on it
- MINOR: stconn: Be prepared to handle error when a SC is attached to an applet
- MINOR: applet: Add dedicated IN/OUT buffers for appctx
- MINOR: applet: Add traces to debug receive/send and block/wake events
- MINOR: applet: Add support for callback functions to exchange data with channels
- MINOR: applet: Implement default functions to exchange data with channels
- MEDIUM: stconn: Add functions to handle applets I/O from the SC layer
- MEDIM: applet: Add the applet handler based on IN/OUT buffers
- MINOR: applet: Show IN/OUT buffers in trace messages when used
- MINOR: applet: Add flags on the appctx and stop abusing its state
- MINIOR: applet: Add flags to deal with ends of input, ends of stream and errors
- MINOR: applet: Remove appctx state field to only used the flags
- MINOR: applet: Add an appctx flag to report shutdown to applets
- MEDIUM: applet: Use appctx flags to report EOS/EOI/ERROR to SE
- MINOR: applet: Add callback function to deal with zero-copy forwarding
- MEDIUM: applet: Add support for zero-copy forwarding from an applet
- MINOR: applet: Automatically handle applets having more data for the stream
- MEDIUM: stats: Don't interrupt processing on partial post
- MAJOR: stats: Update HTTP stats applet to handle its own buffers
- MEDIUM: cache: Temporarily remove zero-copy forwarding support
- MAJOR: cache: Update HTTP cache applet to handle its own buffers
- MAJOR: cache: Send cached objects using zero-copy forwarding
- MINOR: stconn: Add support for flags during zero-copy forwarding negotiation
- MINOR: mux-h1: Be able to define the length of a chunk size when it is prepended
- MEDIUM: stconn: Nofify requested size during zero-copy forwarding nego is exact
- MINOR: mux-h1: Stop zero-copy forwarding during nego for too big requested size
- MEDIUM: mux-h1: Support zero-copy forwarding for chunks with an unknown size
- MAJOR: stats: Send stats dump over HTTP using zero-copy forwarding
- MEDIUM: applet: Simplify a bit API to exchange data with applets
- MINOR: cache: Remove unsed .data_sent field from the cache applet context
- MINOR: applet: Use an option to disable zero-copy forwarding for all applets
- MINOR: applet: Identify applets using their own buffers via a flag
- BUG/MINOR: ssl: Duplicate ocsp update mode when dup'ing ckch
- MINOR: ssl: Use OCSP_CERTID instead of ckch_store in ckch_store_build_certid
- BUG/MINOR: ssl: Clear the ckch instance when deleting a crt-list line
- BUG/MEDIUM: ocsp: Separate refcount per instance and per store
- BUG/MINOR: ssl: Destroy ckch instances before the store during deinit
- BUG/MINOR: ssl: Reenable ocsp auto-update after an "add ssl crt-list"
- REGTESTS: ssl: Add OCSP related tests
- REGTESTS: ssl: Fix empty line in cli command input
- DOC: install: recommend pcre2
- DOC: config: fix misplaced "txn.conn_retries"
- DOC: config: fix typos for "bytes_{in,out}"
- DOC: config: fix misplaced "bytes_{in,out}"
- DOC: config: add more custom log format table alternatives
- MINOR: stream: rename "txn.redispatch" to "txn.redispatched"
- MINOR: sample: implement bc_{be,srv}_queue samples
- BUG/MINOR: mux-h2: count rejected DATA frames against the connection's flow control
- MINOR: mux-h2: count excess of CONTINUATION frames as a glitch
- MINOR: mux-h2: count late reduction of INITIAL_WINDOW_SIZE as a glitch
- DOC: internal: update missing data types in peers-v2.0.txt
- MEDIUM: stick-tables: add a new stored type for glitch_cnt and glitch_rate
- MINOR: session: add the necessary functions to update the per-session glitches
- MEDIUM: mux-h2: update session trackers with number of glitches
- BUG/MINOR: server/cli: add missing LF at the end of certain notice/error lines
- BUG/MINOR: vars/cli: fix missing LF after "get var" output
- BUG/MEDIUM: cli: fix once for all the problem of missing trailing LFs
- MINOR: cli: make sure to always print a pending message after release()
- MINOR: cli: always reset the applet task's timeout
- MINOR: cli: add a new "wait" command to wait for a certain delay
- BUG/MINOR: applet: Always release empty appctx buffers after processing
- MINOR: server: split the server deletion code in two parts
- MINOR: cli/wait: make the wait command support a more detailed help message
- MINOR: cli/wait: also support an unrecoverable failure status
- MINOR: cli/wait: also pass up to 4 arguments to the external conditions
- MINOR: cli/wait: add a condition to wait on a server to become unused
- CI: Update to actions/cache@v4
- BUILD: address a few remaining calloc(size, n) cases
- BUG/MEDIUM: pool: fix rare risk of deadlock in pool_flush()
The "wait" command now supports a condition, "srv-unused", which waits
for the designated server to become totally unused, indicating that it
is removable. Upon each wakeup it calls srv_check_for_deletion() to
verify if conditions are met, if not if it's recoverable, or if it's
not recoverable, and proceeds according to this, never waiting for a
final decision longer than the configured delay.
The purpose is to make it possible to remove servers from the CLI after
waiting for their sessions to be terminated:
$ socat -t5 /path/to/socket - <<< "
disable server px/srv1
shutdown sessions server px/srv1
wait 2s srv-unused px/srv1
del server px/srv1"
Or even wait for connections to terminate themselves:
$ socat -t70 /path/to/socket - <<< "
disable server px/srv1
wait 1m srv-unused px/srv1
del server px/srv1"
This allows to insert delays between commands, i.e. to collect a same
set of metrics at a fixed interval. E.g:
$ socat -t20 /path/to/socket <<< "show activity; wait 10s; show activity"
The goal will be to extend the feature to optionally support waiting on
certain conditions. For this reason the struct definitions and enums were
placed into cli-t.h.
This adds a new pair of stored types in the stick-tables:
- glitch_cnt
- glitch_rate
These keep count of the number of glitches reported on a front connection,
in order to decide how to act with a badly defective client or a potential
attacker. For now nothing updates these counters, but all the infrastructure
needed to configure, update and retrieve them was added, including the doc.
No regtest was added yet since they're not filled yet.
This is apparently the only location where the stored data types are
documented, but it was quite outdated as it stopped at gpc1 rate. This
patch adds the missing types (up to and including gpc_rate).
The fetch will return true if the stream was redispatched: this is a
past action, thus we rename the fetch to better reflect its true
meaning and prevent confusions.
Documentation was updated.
While at it, the fetch was moved from internal states section to Layer 4
section, which is where it belongs.
No backport needed unless 92b2edb (" MINOR: stream: add "txn.redispatch"
fetch") gets backported.
Counters are managed at the stream level and also work in TCP mode.
They were found in the Layer 7 section, moving them to the Layer 4
section instead.
This could be backported in 2.9 with fa0a304f3 ("DOC: config: add an
index of sample fetch keywords")
An extra space was placed at the start of "bytes_out" description,
and dconv was having a hard time to properly render the text in html
format because of that.
Finally, remove an extra line feed.
This should be backported in 2.9 with c7424a1ba ("MINOR: samples:
implement bytes_in and bytes_out samples")
txn.conn_retries was inserted in the internal states sample table, but it
should belong to Layer 4 sample table instead (SMP_USE_L4SRV)
This should be backported in 2.9 with fa0a304f3 ("DOC: config: add an
index of sample fetch keywords")
At the beginning of the 3.0-dev cycle, the zero-copy forwarding support was
added only for the cache applet with an option to disable it. This was a
hack, waiting for a better integration with applets. It is now possible to
implement the zero-copy forwarding for any applets. So the specific option
for the cache applet was renamed to be used for all applets. And this option
is now also checked for the stats applet.
Concretely, 'tune.cache.zero-copy-forwarding' was renamed to
'tune.applet.zero-copy-forwarding'.
Fetch will return true if the stream underwent a redispatch according to
"option redispatch" setting upon retries.
Documentation was added, and the "%rc" logformat alternative now mentions
the new fetch to properly emulate the logformat behavior.
set-bc-{mark,tos} actions are pretty similar to set-fc-{mark,tos} to set
mark/tos on packets sent from haproxy to server: set-bc-{mark,tos} actions
act on the whole backend/srv connection: from connect() to connection
teardown, thus they may only be used before the connection to the server
is instantiated, meaning that they are only relevant for request-oriented
rules such as tcp-request or http-request rules. For now their use is
limited to content request rules, because tos and mark informations are
stored directly within the stream, thus it is required that the stream
already exists.
stream flags are used in combination with dedicated stream struct members
variables to pass 'tos' and 'mark' informations so that they are correctly
considered during stream connection assignment logic (prior to connecting
to actually connecting to the server)
'tos' and 'mark' fd sockopts are taken into account in conn hash
parameters for connection reuse mechanism.
The documentation was updated accordingly.
In this patch we add the possibility to use sample expression as argument
for set-fc-{mark,tos} actions. To make it backward compatible with
previous behavior, during parsing we first try to parse the value as
as integer (decimal or hex notation), and then fallback to expr parsing
in case of failure.
The documentation was updated accordingly.
This is a complementary patch to "MINOR: tcp-act: Rename "set-{mark,tos}"
to "set-fc-{mark,tos}"", but for the Lua API.
set_mark and set_tos were kept as aliases for set_fc_mark and set_fc_tos
but they were marked as deprecated.
Using this opportunity to reorder set_mark and set_tos by alphabetical
order.
"set-mark" and "set-tos" only alter packets from haproxy to client
(frontend connection). Since we may add support for equivalent keywords
on server side, we rename them with an explicit name to prevent
confusions.
Thus, we rename:
- "set-mark" to "set-fc-mark"
- "set-tos" to "set-fc-tos"
"set-mark" and "set-tos" were kept as aliases (to "set-fc-mark" and
"set-fc-tos" respectively) for now to prevent config breakage, but they
have been marked as deprecated so they can be removed in future version.
Move httpclient keywords into its own section and explain adding
an introductory paragraph.
Also see Github issue #2409
Should be backported to 2.6 ; but note that:
2.7 does not have httpclient.resolvers.disabled
2.6 does not have httpclient.retries and httpclient.timeout.connect
Make it more explicit what happens in the various scenarios that cause
HAProxy to stop waiting when "http-request wait-for-body" is used.
Also fix a couple of grammatical errors.
Fixes: #2410
Signed-Off-By: Thayne McCombs <astrothayne@gmail.com>
Released version 3.0-dev2 with the following main changes :
- MINOR: ot: logsrv struct becomes logger
- MINOR: ssl: Update ssl_fc_curve/ssl_bc_curve to use SSL_get0_group_name
- CLEANUP: ssl: fix indentation in smp_fetch_ssl_fc_ec()
- DEV: patchbot: produce a verdict for too long commit messages
- CLEANUP: ssl: fix indentation in smp_fetch_ssl_fc_ec() (part 2)
- CLEANUP: quic: Double quic_dgram_parse() prototype declaration.
- BUG/MINOR: map: list-based matching potential ordering regression
- REGTESTS: add a test to ensure map-ordering is preserved
- DOC: config: fix typo about map_*_key converters
- DOC: configuration: corrected description of keyword tune.ssl.ocsp-update.mindelay
- MINOR: map: mapfile ordering also matters for tree-based match types
- DEV: phash: add a trivial perfect hash generator for integers
- OPTIM: http: simplify http_get_status_idx() using a hash
- CLEANUP: http: avoid duplicating literals in find_http_meth()
- MINOR: http: add infrastructure to choose status codes for err / fail
- MEDIUM: http_act: check status codes against the bit fields for err/fail
- MEDIUM: http: add the ability to redefine http-err-codes and http-fail-codes
- CI: codespell: ignore some words in URLs
- CI: codespell: add more words to whitelist
- CLEANUP: fix spelling of "occured" in src/h3.c
- BUILD: quic: missing include for quic_tp
- BUG/MINOR: mux-quic: do not prevent non-STREAM sending on flow control
- MEDIUM: ssl: allow multiple fallback certificate to allow ECDSA/RSA selection
- MEDIUM: ssl: generate '*' SNI filters for default certificates
- MEDIUM: ssl: does not use default_ctx for 'generate-certificate' option
- REORG: ssl: move 'generate-certificates' code to ssl_gencert.c
- DOC: configuration: update configuration on how to have multiple default certs
- MEDIUM: ssl: implements 'default-crt' keyword for bind Lines
- CI: github: update wolfSSL to 5.6.6
- DOC: INSTALL: require at least WolfSSL 5.6.6
- DEV: h2: add support for multiple flags in mkhdr
- DEV: h2: support hex-encoded data sequences in mkhdr
- BUG/MINOR: mux-h2: also count streams for refused ones
- BUG/MEDIUM: quic: keylog callback not called (USE_OPENSSL_COMPAT)
- MINOR: vars: fix indentation in var_clear_buffer()
- DOC: configuration: fix set-dst in actions keywords matrix
- BUG/MEDIUM: mux-h2: refine connection vs stream error on headers
- MINOR: mux-h2/traces: add a missing trace on connection WU with negative inc
- MINOR: mux-h2: add a counter of "glitches" on a connection
- MINOR: connection: add a new mux_ctl to report number of connection glitches
- MINOR: mux-h2: implement MUX_CTL_GET_GLITCHES
- MINOR: connection: add sample fetches to report per-connection glitches
- BUILD: stick-table: fix build error on 32-bit platforms
- MINOR: quic: Transport parameters encoding without version_information
- MINOR: quic: Enable early data at SSL session level (aws-lc)
- MINOR: ssl_sock: Early data disabled during SSL_CTX switching (aws-lc)
- MINOR: quic: Correctly wait for the completion of handshakes with early data (aws-lc)
- BUG/MEDIUM: cli: some err/warn msg dumps add LR into CSV output on stat's CLI
- BUG/MINOR: jwt: fix jwt_verify crash on 32-bit archs
- BUILD: quic: fix build error when using the compatibility layer
- BUILD: quic: Fix build error when building QUIC against wolfssl.
- BUILD: quic: Fix build error when building QUIC against libressl.
- BUG/MINOR: hlua: fix uninitialized var in hlua_core_get_var()
- CLEANUP: hlua: fix indent, remove extra return in hlua_core_get_var()
- BUG/MEDIUM: cache: Fix crash when deleting secondary entry
- BUG/MINOR: quic: newreno QUIC congestion control algorithm no more available
- CLEANUP: quic: Remove unused CUBIC_BETA_SCALE_FACTOR_SHIFT macro.
- MINOR: quic: Stop hardcoding a scale shifting value (CUBIC_BETA_SCALE_FACTOR_SHIFT)
- MINOR: quic: extract qc_stream_buf free in a dedicated function
- BUG/MEDIUM: quic: remove unsent data from qc_stream_desc buf
- CLEANUP: fix spelling of "elemt"
- CI: extend spell check white list
- CI: enable spell check on git push
- BUILD: makefile: also define cmd_CXX to pretty-print C++ build commands
- BUILD/MEDIUM: deviceatlas: addon build rework.
- DOC: deviceatlas: update to be in line with the v3 api.
- BUILD/MEDIUM: deviceatlas: updating the addon part.
- BUILD: deviceatlas: remove unneeded depenency on libcurl / libzip
- BUILD: deviceatlas: fix empty "-I" left on CFLAGS
- Revert "CI: enable spell check on git push"
Now with fc_glitches and bc_glitches we can retrieve the number of
detected glitches on a front or back connection. On the backend it
can indicate a bug in a server that may induce frequent reconnections
hence CPU usage in TLS reconnections, and on the frontend it may
indicate an abusive client that may be trying to attack the stack
or to fingerprint it. Small non-zero values are definitely expected
and can be caused by network glitches for example, as well as rare
bugs in the other component (or maybe even in haproxy). These should
never be considered as alarming as long as they remain low (i.e.
much less than one per request). A reg-test is provided.
Since d54e8f8107 ("DOC: config: reorganize actions into their own section")
dconv-generated shortlink for "set-dst" in actions keywords matrix is
broken.
This is due to trailing "<expr>" which should not be specified in the
matrix, but only in the actual keyword prototype and description.
This should be backported in 2.9 with d54e8f8107.
The new global keywords "http-err-codes" and "http-fail-codes" allow to
redefine which HTTP status codes indicate a client-induced error or a
server error, as tracked by stick-table counters. This is only done
globally, though everything was done so that it could easily be extended
to a per-proxy mechanism if there was a real need for this (but it would
eat quite more RAM then).
A simple reg-test was added (http-err-fail.vtc).
Deleted the text paragraph in the description of keyword
tune.ssl.ocsp-update.mindelay, which was added in the commit 5843237
"MINOR: ssl: Add global options to modify ocsp update min/max delay",
because it was a copy of the description of tune.ssl.ssl-ctx-cache-size.
Fix a doc typo that was introduced with ca4758378 ("MINOR: map: add
map_*_key converters to provide the matching key").
No backport needed unless ca4758378 is.
Released version 3.0-dev1 with the following main changes :
- MINOR: channel: Use dedicated functions to deal with STREAMER flags
- MEDIUM: applet: Handle channel's STREAMER flags on applets size
- MINOR: applets: Use channel's field to compute amount of data received
- MEDIUM: cache: Save body size of cached objects and track it on delivery
- MEDIUM: cache: Add support for endp-to-endp fast-forwarding
- MINOR: cache: Add global option to enable/disable zero-copy forwarding
- MINOR: pattern: Use reference name as filename to read patterns from a file
- MEDIUM: pattern: Add support for virtual and optional files for patterns
- DOC: config: Add section about name format for maps and ACLs
- DOC: management/lua: Update commands about map and acl
- MINOR: promex: Add support for specialized front/back/li/srv metric names
- MINOR: promex: Export active/backup metrics per-server
- BUG/MINOR: ssl: Double free of OCSP Certificate ID
- MINOR: ssl/cli: Add ha_(warning|alert) msgs to CLI ckch callback
- BUG/MINOR: ssl: Wrong OCSP CID after modifying an SSL certficate
- BUG/MINOR: lua: Wrong OCSP CID after modifying an SSL certficate (LUA)
- DOC: configuration: typo req.ssl_hello_type
- MINOR: hq-interop: add fastfwd support
- CLEANUP: mux_quic: rename ffwd function with prefix qmux_strm_
- MINOR: mux-quic: add traces for 0-copy/fast-forward
- BUG/MINOR: mworker/cli: fix set severity-output support
- CLEANUP: mworker/cli: add comments about pcli_find_and_exec_kw()
- BUG/MEDIUM: quic: Possible buffer overflow when building TLS records
- BUILD: ssl: update types in wolfssl cert selection callback
- MINOR: ssl: activate the certificate selection callback for WolfSSL
- CI: github: switch to wolfssl git-c4b77ad for new PR
- BUG/MEDIUM: map/acl: pat_ref_{set,delete}_by_id regressions
- BUG/MINOR: ext-check: cannot use without preserve-env
- CLEANUP: mux-quic: remove unused prototype
- MINOR: mux-quic: clean up qcs Rx buffer allocation API
- MINOR: mux-quic: clean up qcs Tx buffer allocation API
- CLEANUP: mux-quic: clean up app ops callback definitions
- MINOR: mux-quic: factorize QC_SF_UNKNOWN_PL_LENGTH set
- MINOR: h3: complete traces for sending
- MINOR: h3: adjust zero-copy sending related code
- MINOR: hq-interop: use zero-copy to transfer single HTX data block
- BUG/MEDIUM: quic: QUIC CID removed from tree without locking
- BUG/MEDIUM: stconn: Block zero-copy forwarding if EOS/ERROR on consumer side
- BUG/MEDIUM: mux-h1: Cound data from input buf during zero-copy forwarding
- BUG/MEDIUM: mux-h1: Explicitly skip request's C-L header if not set originally
- CLEANUP: mux-h1: Fix a trace message about C-L header addition
- BUG/MEDIUM: mux-h2: Report too large HEADERS frame only when rxbuf is empty
- BUG/MEDIUM: mux-quic: report early error on stream
- DOC: config: add arguments to sample fetch methods in the table
- DOC: config: also add arguments to the converters in the table
- BUG/MINOR: resolvers: default resolvers fails when network not configured
- SCRIPTS: mk-patch-list: produce a list of patches
- DEV: patchbot: add the AI-based bot to pre-select candidate patches to backport
- BUG/MEDIUM: mux-h2: Switch pending error to error if demux buffer is empty
- BUG/MEDIUM: mux-h2: Only Report H2C error on read error if demux buffer is empty
- BUG/MEDIUM: mux-h2: Don't report error on SE if error is only pending on H2C
- BUG/MEDIUM: mux-h2: Don't report error on SE for closed H2 streams
- DOC: config: Update documentation about local haproxy response
- DEV: patchbot: use checked buttons as reference instead of internal table
- DEV: patchbot: allow to show/hide backported patches
- MINOR: h3: remove quic_conn only reference
- BUG/MINOR: server: Use the configured address family for the initial resolution
- MINOR: mux-quic: remove qcc_shutdown() from qcc_release()
- MINOR: mux-quic: use qcc_release in case of init failure
- MINOR: mux-quic: adjust error code in init failure
- MINOR: h3: add traces for connection init stage
- BUG/MINOR: h3: properly handle alloc failure on finalize
- MINOR: h3: use INTERNAL_ERROR code for init failure
- BUG/MAJOR: stconn: Disable zero-copy forwarding if consumer is shut or in error
- MINOR: stats: store the parent proxy in stats ctx (http)
- BUG/MEDIUM: stats: unhandled switching rules with TCP frontend
- MEDIUM: proxy: set PR_O_HTTP_UPG on implicit upgrades
- MINOR: proxy: monitor-uri works with tcp->http upgrades
- OPTIM: server: eb lookup for server_find_by_name()
- OPTIM: server: ebtree lookups for findserver_unique_* functions
- MINOR: server/event_hdl: add server_inetaddr struct to facilitate event data usage
- MINOR: server/event_hdl: update _srv_event_hdl_prepare_inetaddr prototype
- BUG/MINOR: server/event_hdl: propagate map port info through inetaddr event
- MINOR: server: ensure connection cleanup on server addr changes
- CLEANUP: server/event_hdl: remove purge_conn hint in INETADDR event
- MEDIUM: server: merge srv_update_addr() and srv_update_addr_port() logic
- CLEANUP: server: remove unused server_parse_addr_change_request() function
- CLEANUP: resolvers: remove duplicate func prototype
- MINOR: resolvers: add unique numeric id to nameservers
- MEDIUM: server: make server_set_inetaddr() updater serializable
- MINOR: server/event_hdl: expose updater info through INETADDR event
- MINOR: server: add dns hint in server_inetaddr_updater struct
- MEDIUM: server/dns: clear RMAINT when addr resolves again
- BUG/MINOR: server/dns: use server_set_inetaddr() to unset srv addr from DNS
- BUG/MEDIUM: server/dns: perform svc_port updates atomically from SRV records
- MEDIUM: peers: use server as stream target
- CLEANUP: peers: remove unused sock_init_arg struct member
- CLEANUP: peers: remove unused "proto" and "xprt" struct members
- MINOR: peers: rely on srv->addr and remove peer->addr
- DOC: config: add context hint for server keywords
- MINOR: stktable: add table_process_entry helper function
- MINOR: stktable: use {show,set,clear} table with ptr
- MINOR: map: add map_*_key converters to provide the matching key
- DOC: fix typo for fastfwd QUIC option
- BUG/MINOR: mux-quic: always report error to SC on RESET_STREAM emission
- MEDIUM: mux-quic: add BUG_ON if sending on locally closed QCS
- BUG/MINOR: mux-quic: disable fast-fwd if connection on error
- BUG/MINOR: quic: Wrong keylog callback setting.
- BUG/MINOR: quic: Missing call to TLS message callbacks
- MINOR: h3: check connection error during sending
- BUG/MINOR: h3: close connection on header list too big
- BUG/MINOR: h3: close connection on sending alloc errors
- BUG/MINOR: h3: disable fast-forward on buffer alloc failure
- Revert "MINOR: mux-quic: Disable zero-copy forwarding for send by default"
- MINOR: stktable: stktable_data_ptr() cannot fail in table_process_entry()
- CLEANUP: assorted typo fixes in the code and comments
- CI: use semantic version compare for determing "latest" OpenSSL
- CLEANUP: server: remove ambiguous check in srv_update_addr_port()
- CLEANUP: resolvers: remove unused RSLV_UPD_OBSOLETE_IP flag
- CLEANUP: resolvers: remove some more unused RSLV_UDP flags
- MEDIUM: server: simplify snr_set_srv_down() to prevent confusions
- MINOR: backend: export get_server_*() functions
- MINOR: tcpcheck: export proxy_parse_tcpcheck()
- MEDIUM: udp: allow to retrieve the frontend destination address
- MINOR: global: export a way to list build options
- MINOR: debug: add features and build options to "show dev"
- BUG/MINOR: server: fix server_find_by_name() usage during parsing
- REGTESTS: check attach-srv out of order declaration
- CLEANUP: quic: Remaining useless code into server part
- BUILD: quic: Missing quic_ssl.h header protection
- BUG/MEDIUM: h3: fix incorrect snd_buf return value
- MINOR: h3: do not consider missing buf room as error on trailers
- BUG/MEDIUM: stconn: Forward shutdown on write timeout only if it is forwardable
- BUG/MEDIUM: stconn: Set fsb date if zero-copy forwarding is blocked during nego
- BUG/MEDIUM: spoe: Never create new spoe applet if there is no server up
- MINOR: mux-h2: support limiting the total number of H2 streams per connection
- CLEANUP: mux-h2: remove the printfs from previous commit on h2 streams limit.
- DEV: h2: add the ability to emit literals in mkhdr
- DEV: h2: add the preface as well in supported output types
- DEV: h2: support passing raw data for a frame
- IMPORT: ebtree: implement and use flsnz_long() to count bits
- IMPORT: ebtree: switch the sizes and offsets to size_t and ssize_t
- IMPORT: ebtree: rework the fls macros to better deal with arch-specific ones
- IMPORT: ebtree: make string_equal_bits turn back to unsigned char
- IMPORT: ebtree: use unsigned ints for flznz()
- IMPORT: ebtree: make string_equal_bits() return an unsigned
This patch introduces a new setting: tune.h2.fe.max-total-streams. It
sets the HTTP/2 maximum number of total streams processed per incoming
connection. Once this limit is reached, HAProxy will send a graceful GOAWAY
frame informing the client that it will close the connection after all
pending streams have been closed. In practice, clients tend to close as fast
as possible when receiving this, and to establish a new connection for next
requests. Doing this is sometimes useful and desired in situations where
clients stay connected for a very long time and cause some imbalance inside a
farm. For example, in some highly dynamic environments, it is possible that
new load balancers are instantiated on the fly to adapt to a load increase,
and that once the load goes down they should be stopped without breaking
established connections. By setting a limit here, the connections will have
a limited lifetime and will be frequently renewed, with some possibly being
established to other nodes, so that existing resources are quickly released.
The default value is zero, which enforces no limit beyond those implied by
the protocol (2^30 ~= 1.07 billion). Values around 1000 were found to
already cause frequent enough connection renewal without causing any
perceptible latency to most clients. One notable exception here is h2load
which reports errors for all requests that were expected to be sent over
a given connection after it receives a GOAWAY. This is an already known
limitation: https://github.com/nghttp2/nghttp2/issues/981
The patch was made in two parts inside h2_frt_handle_headers():
- the first one, at the end of the function, which verifies if the
configured limit was reached and if it's needed to emit a GOAWAY ;
- the second, just before decoding the stream frame, which verifies if
a previously configured limit was ignored by the client, and closes
the connection if this happens. Indeed, one reason for a connection
to stay alive for too long definitely comes from a stupid bot that
periodically fetches the same resource, scans lots of URLs or tries
to brute-force something. These ones are more likely to just ignore
the last stream ID advertised in GOAWAY than a regular browser, or
a well-behaving client such as curl which respects it. So in order
to make sure we can close the connection we need to enforce the
advertised limit.
Note that a regular client will not face a problem with that because in
the worst case it will have max_concurrent_streams in flight and this
limit is taken into account when calculating the advertised last
acceptable stream ID.
Just a note: it may also be possible to move the first part above to
h2s_frt_stream_new() instead so that it's not processed for trailers,
though it doesn't seem to be more interesting, first because it has
two return points.
This is something that may be backported to 2.9 and 2.8 to offer more
control to those dealing with dynamic infrastructures, especially since
for now we cannot force a connection to be cleanly closed using rules
(e.g. github issues #946, #2146).
This reverts commit 18f2ccd244.
Found issues related to QUIC fast-forward were resolved (see github
issue #2372). Reenable it by default. If any issue arises, it can be
disabled using the global statement :
tune.quit.zero-copy-fwd-send off
This can be backported to 2.9, but only after a sensible period of
observation.
All map_*_ converters now have an additional output type: key. Such
converters will return the matched entry's key (as found in the map file)
as a string instead of the value.
Consider this example map file:
|example.com value1
|haproxy value2
With the above map file:
str(test.example.com/url),map_dom_key(file.map) will return "example.com"
str(running haproxy),map_sub_key(file.map) will return "haproxy"
This should address GH #1446.
Documentation about 'L' state in the termination state was outdated. Today,
not only the request may be intercepted, but also the response.
Documentation about 'L' must be more generic.
However, documentation about possible 2-letter termination states was also
extended to add 'LC' and 'LH' in the list. And 'LR' was adapted too.
This patch should fix the issue #2384. It may be backported to every stable
versions. Note that on 2.8 and lowers, we talk about session and not stream.
rep_ssl_hello_type was renamed in res.ssl_hello_type a long time ago.
This patch fixes a typo where an example was renamed
"rep.ssl_hello_type" instead of "res.ssl_hello_type"
fixes issue #2377 and #2379.
Must be backported in all maintained versions.
Because maps and list of ACLs are no longer necessarily referenced by
filenames, CLI commands to manipulate them were updated accordingly. Instead
of "filename" we talk about "name" now.
The same is performed in the LUA documentation.
Maps and list of ACLs can now reference something else than regular files
and can have prefix to set the type of the list (file, virutal file or
optional file). So, the configuration manual was updated accordingly.
The section 2.7. about name format for maps and ACLs was added (the former
2.7. sections with some examples was moved to 2.8.) and references to map or
ACLs files were updated.
tune.cache.zero-copy-forwarding parameter can now be used to enable or
disable the zero-copy fast-forwarding for the cache applet only. It is
enabled ('on') by default. It can be disabled by setting the parameter to
'off'.
Released version 2.9.0 with the following main changes :
- DOC: config: add missing colon to "bytes_out" sample fetch keyword (2)
- BUG/MINOR: cfgparse-listen: fix warning being reported as an alert
- DOC: config: add matrix entry for "max-session-srv-conns"
- DOC: config: fix monitor-fail typo
- DOC: config: add context hint for proxy keywords
- DEBUG: stream: Report lra/fsb values for front end back SC in stream dump
- REGTESTS: sample: Test the behavior of consecutive delimiters for the field converter
- BUG/MINOR: sample: Make the `word` converter compatible with `-m found`
- DOC: Clarify the differences between field() and word()
- BUG/MINOR: server/event_hdl: properly handle AF_UNSPEC for INETADDR event
- BUILD: http_htx: silence uninitialized warning on some gcc versions
- MINOR: acme.sh: don't use '*' in the filename for wildcard domain
- MINOR: global: Use a dedicated bitfield to customize zero-copy fast-forwarding
- MINOR: mux-pt: Add global option to enable/disable zero-copy forwarding
- MINOR: mux-h1: Add global option to enable/disable zero-copy forwarding
- MINOR: mux-h2: Add global option to enable/disable zero-copy forwarding
- MINOR: mux-quic: Add global option to enable/disable zero-copy forwarding
- MINOR: mux-quic: Disable zero-copy forwarding for send by default
- DOC: config: update the reminder on the HTTP model and add some terminology
- DOC: config: add a few more differences between HTTP/1 and 2+
- DOC: config: clarify session vs stream
- DOC: config: fix typo abandonned -> abandoned
- DOC: management: fix two latest typos (optionally, exception)
- BUG/MEDIUM: peers: fix partial message decoding
- DOC: management: update stream vs session
No backport needed, these were introduced by latest commits 3dd55fa13
("MINOR: mworker/cli: implement hard-reload over the master CLI") and
cef29d370 ("MINOR: trace: define simple -dt argument").
It was really necessary to try to clear the confusion between sessions
and streams, so let's first lift a little bit the HTTP model part to
better consider new protocols, and explain what a stream is and how this
differs from the earlier sessions.
There is at least an bug for now in this part and it is still unstable. Thus
it is better to disable it for now by default. It can be enable by setting
tune.quic.zero-copy-fwd-send to 'on'.
tune.quic.zero-copy-fwd-send can now be used to enable or disable the
zero-copy fast-forwarding for the QUIC mux only, for sends. For now, there
is no option to disable it for receives because it is not supported yet.
It is enabled ('on') by default.
tune.h2.zero-copy-fwd-send can now be used to enable or disable the
zero-copy fast-forwarding for the H2 mux only, for sends. For now, there is
no option to disable it for receives because it is not supported yet.
It is enabled ('on') by default.
tune.h1.zero-copy-fwd-recv and tune.h1.zero-copy-fwd-send can now be used to
enable or disable the zero-copy fast-forwarding for the H1 mux only, for
receives or sends. Unlike the PT mux, there are 2 options here because
client and server sides can use difference muxes.
Both are enabled ('on') by default.
tune.pt.zero-copy-forwarding parameter can now be used to enable or disable
the zero-copy fast-forwarding for the PT mux only. It is enabled ('on') by
default. It can be disabled by setting the parameter to 'off'. In this case,
this disables receive and send side.
Zero-copy fast-forwading feature is a quite new and is a bit sensitive.
There is an option to disable it globally. However, all protocols have not
the same maturity. For instance, for the PT multiplexer, there is nothing
really new. The zero-copy fast-forwading is only another name for the kernel
splicing. However, for the QUIC/H3, it is pretty new, not really optimized
and it will evolved. And soon, the support will be added for the cache
applet.
In this context, it is usefull to be able to enable/disable zero-copy
fast-forwading per-protocol and applet. And when it is applicable, on sends
or receives separately. So, instead of having one flag to disable it
globally, there is now a dedicated bitfield, global.tune.no_zero_copy_fwd.
word() mentions that delimiters at the start and end are ignored, but
it does not mention that consecutive delimiters are merged.
May be backported as far as the patch applies.
Add a small list of contexts where each proxy keyword is expected to be
employed. (Similar to the defaults/frontend/backend/listen compatibility
grid).
Following 4039329 ("DOC: config: specify supported sections for
"max-session-srv-conns"), "max-session-srv-conns" was also missing
from the proxy keyword matrix.
Released version 2.9-dev12 with the following main changes :
- BUG/MINOR: global: Fix tune.disable-(fast-forward/zero-copy-forwarding) options
- DOC: config: removing "log-balance" references
- MINOR: server/event_hdl: add SERVER_INETADDR event
- MINOR: tools: use const for read only pointers in ip{cmp,cpy}
- MINOR: server/ip: centralize server ip updates
- MINOR: backend: remove invalid mode test for "hash-balance-factor"
- Revert "MINOR: cfgparse-listen: warn when use-server rules is used in wrong mode"
- MINOR: proxy: add free_logformat_list() helper function
- MINOR: proxy: add free_server_rules() helper function
- MINOR: log/backend: prevent "use-server" rules use with LOG mode
- MINOR: log/balance: set lbprm tot_weight on server on queue/dequeue
- DOC: config: specify supported sections for "max-session-srv-conns"
- DOC: config: fix timeout check inheritance restrictions
- REGTESTS: connection: disable http_reuse_be_transparent.vtc if !TPROXY
- DOC: lua: add sticktable class reference from Proxy.stktable
- DOC: lua: fix Proxy.get_mode() output
- DOC: lua: add "syslog" to Proxy.get_mode() output
- MEDIUM: ssl: implement rsa/ecdsa selection with WolfSSL
- MINOR: ssl: replace 'trash.area' by 'servername' in ssl_sock_switchctx_cbk()
- MINOR: ssl: move certificate selection in a dedicate function
- MEDIUM: ssl: use ssl_sock_chose_sni_ctx() in the clienthello callback
- MINOR: mworker/cli: implement hard-reload over the master CLI
- BUG/MEDIUM: mux-h1: Properly ignore trailers when a content-length is announced
- MINOR: task/profiling: do not record task_drop_running() as a caller
- OPTIM: pattern: save memory and time using ebst instead of ebis
- BUILD: map: fix build warning
- MINOR: trace: define simple -dt argument
- MINOR: trace: parse level in a function
- MINOR: trace: parse verbosity in a function
- MINOR: trace: support -dt optional format
- OPTIM: mux-h2/zero-copy: don't allocate more buffers per connections than streams
- BUG/MINOR: quic: fix CONNECTION_CLOSE_APP encoding
- BUG/MEDIUM: stconn: Don't perform zero-copy FF if opposite SC is blocked
- BUG/MEDIUM: mux-h2: Remove H2_SF_NOTIFIED flag for H2S blocked on fast-forward
- CLEANUP: quic: Remove dead definitions/declarations
- REORG: quic: Move some QUIC CLI code to its C file
- REORG: quic: Add a new module to handle QUIC connection IDs
- REORG: quic: QUIC connection types header cleaning
- BUILD: quic: Missing RX header inclusions
- REORG: quic: Move CRYPTO data buffer defintions to QUIC TLS module
- REORG: quic: Move QUIC CRYPTO stream definitions/declarations to QUIC TLS
- REORG: quic: Move several inlined functions from quic_conn.h
- REORG: quic: Move QUIC SSL BIO method related functions to quic_ssl.c
- REORG: quic: Move the QUIC DCID parser to quic_sock.c
- REORG: quic: Rename some functions used upon ACK receipt
- REORG: quic: Move QUIC path definitions/declarations to quic_cc module
- REORG: quic: Move qc_handle_conn_migration() to quic_conn.c
- REORG: quic: Move quic_build_post_handshake_frames() to quic_conn module
- REORG: quic: Move qc_may_probe_ipktns() to quic_tls.h
- REORG: quic: Move qc_pkt_long() to quic_rx.h
- REORG: quic: Rename some (quic|qc)_conn* objects to quic_conn_closed
- REORG: quic: Move NEW_CONNECTION_ID frame builder to quic_cid
- REORG: quic: Move ncbuf related function from quic_rx to quic_conn
- REORG: quic: Add a new module for QUIC retry
- BUILD: quic: Several compiler warns fixes after retry module creation
- REORG: quic: Move qc_notify_send() to quic_conn
- REORG: quic: Add a new module for retransmissions
- REORG: quic: Remove qc_pkt_insert() implementation
- REORG: quic: Move quic_increment_curr_handshake() to quic_sock
- BUG/MINOR: cache: Remove incomplete entries from the cache when stream is closed
- MEDIUM: cli: allow custom pattern for payload
- CLEANUP: mworker/cli: use a label to return errors
- MINOR: mworker/cli: implements the customized payload pattern for master CLI
- DOC: management: add documentation about customized payload pattern
- BUG/MEDIUM: server/event_hdl: memory overrun in _srv_event_hdl_prepare_inetaddr()
- MINOR: event_hdl: add global tunables
- BUG/MAJOR: server/addr: fix a race during server addr:svc_port updates
- MEDIUM: log/balance: support FQDN for UDP log servers
- BUG/MINOR: compression: possible NULL dereferences in comp_prepare_compress_request()
- BUG/MEDIUM: master/cli: Properly pin the master CLI on thread 1 / group 1
- BUG/MEDIUM: mux-quic: Stop zero-copy FF during nego if input is not empty
- CLEANUP: log: Fix %rc comment in sess_build_logline()
- BUG/MINOR: h3: fix TRAILERS encoding
- BUG/MINOR: h3: always reject PUSH_PROMISE
- MINOR: h3: use correct error code for missing SETTINGS
- MINOR: http-fetch: Add a sample to retrieve the server status code
- DOC: config: Improve 'status' sample documentation
- MINOR: http-fetch: Add a sample to get the transaction status code
- MEDIUM: http-ana: Set termination state before returning haproxy response
- MINOR: stream: Expose session terminate state via a new sample fetch
- MINOR: stream: add a sample fetch to get the number of connection retries
- MINOR: stream: Expose the stream's uniq_id via a new sample fetch
- MINOR: muxes: Rename mux_ctl_type values to use MUX_CTL_ prefix
- MINOR: muxes: Add a callback function to send commands to mux streams
- MINOR: muxes: Implement ->sctl() callback for muxes and return the stream id
- MINOR: Add sample fetches to get the frontend and backend stream ID
- BUG/MEDIUM: cli: Don't look for payload pattern on empty commands
- DOC: config: Add argument for tune.lua.maxmem
- DOC: config: fix mention of request slot in http-response capture
- DOC: config: fix remaining mention of @reverse for attach-srv action
- DOC: config: fix missing characters in set-spoe-group action
- DOC: config: reorganize actions into their own section
- BUG/MINOR: acme.sh: update the deploy script
- MINOR: rhttp: mark reverse HTTP as experimental
- CLEANUP: quic_cid: remove unused listener arg
- BUG/MINOR: quic_tp: fix preferred_address decoding
- MINOR: quic_tp: use in_addr/in6_addr for preferred_address
- MINOR: acme.sh: use the master CLI for hot update
- DOC: config: move the cache-use and cache-store actions to the proper section
- DOC: config: fix alphabetical ordering of converter keywords
- DOC: config: add missing colon to "bytes_out" sample fetch keyword
- DOC: config: add an index of converter keywords
- DOC: config: add an index of sample fetch keywords
- BUG/MINOR: config: Stopped parsing upon unmatched environment variables
- DEBUG: unstatify a few functions that are often present in backtraces
- BUILD: server: shut a bogus gcc warning on certain ubuntu
Now we're adding a table for each section, it allows to more easily
spot the list of available sample fetch functions and their types.
For now the arguments are not mentioned in the table because they'd
break indexing but they can be added back later.
- rfc7239_* were misplaced and incorrectly ordered
- table_gpt was placed before some table_gpc*
- capture-req/res were misplaced
- htonl was misplaced
- upper/url_* were misplaced
- x509_v_err_str was misplaced
Let's fix these since poor ordering complicates their finding.
Actions were grouped by previous commit d54e8f810 ("DOC: config: reorganize
actions into their own section") but cache-use and cache-store were still
making reference to the cache section. This moves the text back to their
respective keywords in the actions section and leaves the example and an
explanation of how to use the keywords in the cache section.
Mark the reverse HTTP feature as experimental. This will allow to adjust
if needed the configuration mechanism with future developments without
maintaining retro-compatibility.
Concretely, each config directives linked to it now requires to specify
first global expose-experimental-directives before. This is the case for
the following directives :
- rhttp@ prefix uses in bind and server lines
- nbconn bind keyword
- attach-srv tcp rule
Each documentation section refering to these keywords are updated to
highlight this new requirement.
Note that this commit has duplicated on several places the code from the
global function check_kw_experimental(). This is because the latter only
work with cfg_keyword type. This is not adapted with bind_kw or
action_kw types. This should be improve in a future patch.
The split of the rulesets from their respective actions has long been
overdue so it's time to do it because it has become extremely difficult
to add simple actions in the documentation, as well as it's hard to find
them.
This commit creates two new sections "4.3 Actions keywords matrix" and
"4.4 Alphabetically sorted actions reference" that enumerates all known
actions, with a check indicating for which rule sets they're valid. This
removes all the repetition, occurrences of "see http-request blah for
details" and significantly reduces the number of keywords listed in the
proxies section. This removes 2245 lines from the proxies section in
exchange of 1608 in these new sections.
