Rx has been simplified since the conversion of buffer to a ncbuf. The
old buffer can now be removed. The frms tree is also removed. It was
used previously to stored out-of-order received STREAM frames. Now the
MUX is able to buffer them directly into the ncbuf.
Add a ncbuf for data reception on qcs. Thanks to this, the MUX is able
to buffered all received frame directly into the buffer. Flow control
parameters will be used to ensure there is never an overflow.
This change will simplify Rx path with the future deletion of acked
frames tree previously used for frames out of order.
Redefine the initial local flow-control to enforce by us. Use bufsize as
the maximum offset allowed to be received.
This change is part of an adjustement on the Rx path. Mux buffer will be
converted to a ncbuf. Flow-control parameters must ensure that we never
receive a frame larger than the buffer. With this, all received frames
will be stored in the MUX buffer.
The two functions became exact copies since there's no more special case
for the appctx owner. Let's merge them into a single one, that simplifies
the code.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
The former takes a conn_stream still attached to a valid appctx,
which also complicates the termination of the applet. Instead, let's
pass the appctx which already points to the endpoint, this allows us
to properly detach the conn_stream before the call, which is cleaner
and safer.
The mux ->detach() function currently takes a conn_stream. This causes
an awkward situation where the caller cs_detach_endp() has to partially
mark it as released but not completely so that ->detach() finds its
endpoint and context, and it cannot be done later since it's possible
that ->detach() deletes the endpoint. As such the endpoint link between
the conn_stream and the mux's stream is in a transient situation while
we'd like it to be clean so that the mux's ->detach() code can call any
regular function it wants that knows the regular semantics of the
relation between the CS and the endpoint.
A better approach consists in slightly modifying the detach() API to
better match the reality, which is that the endpoint is detached but
still alive and that it's the only part the function is interested in.
As such, this patch modifies the function to take an endpoint there,
and by analogy (or simplicity) does the same for ->attach(), even
though it looks less important there since we're always attaching an
endpoint to a conn_stream anyway. It is possible that in the future
the API could evolve to use more endpoints that provide a bit more
flexibility in the API, but at this point we don't need to go further.
Muxes and applets need to have both a pointer to the endpoint and to the
conn_stream. It would seem more natural that they only have a pointer to
the endpoint (that is always there) and that this one has an optional
pointer to the conn_stream. This would reduce the number of elements to
manipulate in lower level code. In addition, the conn_stream is not much
used from the lower layers (wake and exceptional events mostly).
Wherever we need to report an error, we have an even easier access to
the endpoint than the conn_stream. Let's first adjust the API to use
the endpoint and rename the function accordingly to cs_ep_set_error().
A new function ncb_advance() is implemented. This is used to advance the
buffer head pointer. This will consume the front data while forming a
new gap at the end for future data.
On success NCB_RET_OK is returned. The operation can be rejected if a
too small new gap is formed in front of the buffer.
Define three different ways to proceed insertion. This configures how
overlapping data is treated.
- NCB_ADD_PRESERVE : in this mode, old data are kept during insertion.
- NCB_ADD_OVERWRT : new data will overwrite old ones.
- NCB_ADD_COMPARE : this mode adds a new test in check stage. The
overlapping old and new data must be identical or else the insertion
is not conducted. An error NCB_RET_DATA_REJ is used in this case.
The mode is specified with a new argument to ncb_add() function.
Implement a new function ncb_add() to insert data in ncbuf. This
operation is conducted in two stages. First, a simulation will be run to
ensure that insertion can be proceeded. If a gap is formed, either
before or after the new data, it must be big enough to store its header,
or else the insertion is aborted.
After this check stage, the insertion is conducted block by block with
the function pair ncb_fill_data_blk()/ncb_fill_gap_blk().
A new type ncb_ret is used as a return value. For the moment, only
success or gap-size error is used. It is planned to add new error types
in the future when insertion will be extended.
Relax the constraint for gap storage when this is the last block.
ncb_blk API functions will consider that if a gap is stored near the end
of the buffer, without the space to store its header, the gap will cover
entirely the buffer end.
For these special cases, the gap size/data size are not write/read
inside the gap to prevent an overflow. Such a gap is designed in
functions as "reduced gap" and will be flagged with the value
NCB_BK_F_FIN.
This should reduce the rejection on future add operation when receiving
data in-order. Without reduced gap handling, an insertion would be
rejected if it covers only partially the last buffer bytes, which can be
a very common case.
Implement two new functions to report the total data stored accross the
whole buffer and the data stored at a specific offset until the next gap
or the buffer end.
To facilitate implementation of these new functions and also future
add/delete operations, a new abstraction is introduced : ncb_blk. This
structure represents a block of either data or gap in the buffer. It
simplifies operation when moving forward in the buffer. The first buffer
block can be retrieved via ncb_blk_first(buf). The block at a specific
offset is accessed via ncb_blk_find(buf, off).
This abstraction is purely used in functions but not stored in the ncbuf
structure per-se. This is necessary to keep the minimal memory
footprint.
Define the new type ncbuf. It can be used as a buffer with
non-contiguous data and wrapping support.
To reduce as much as possible the memory footprint, size of data and
gaps are stored in the gaps themselves. This put some limitation on the
buffer usage. A reserved space is present just before the head to store
the size of the first data block. Also, add and delete operations will
be constrained to ensure minimal gap sizes are preserved.
The sizes stored in the gaps are represented by a custom type named
ncb_sz_t. This type is a typedef to easily change it : this has a
direct impact on the maximum buffer size (MAX(ncb_sz_t) - sizeof(ncb_sz_t))
and the minimal gap sizes (sizeof(ncb_sz_t) * 2)).
Currently, it is set to uint32_t.
Add send_stateless_reset() to send a stateless reset packet. It prepares
a packet to build a 1-RTT packet with quic_stateless_reset_token_cpy()
to copy a stateless reset token derived from the cluster secret with
the destination connection ID received as salt.
Also add QUIC_EV_STATELESS_RST new trace event to at least to have a trace
of the connection which are reset.
This function will have to call another one from quic_tls.[ch] soon.
As we do not want to include quic_tls.h from xprt_quic.h because
quic_tls.h already includes xprt_quic.h, let's moving it into
xprt_quic.c.
This is a wrapper function around OpenSSL HKDF API functions to
use the "extract-then-expand" HKDF mode as defined by rfc5869.
This function will be used to derived stateless reset tokens
from secrets ("cluster-secret" conf. keyword) and CIDs (as salts).
It could be usefull to set a ASCII secret which could be used for different
usages. For instance, it will be used to derive QUIC stateless reset tokens.
A ->time_received new member is added to quic_rx_packet to store the time the
packet are received. ->largest_time_received is added the the packet number
space structure to store this timestamp for the packet with a new largest
packet number to be acknowledged. QUIC_FL_PKTNS_NEW_LARGEST_PN new flag is
added to mark a packet number space as having to acknowledged a packet wih a
new largest packet number. In this case, the packet number space ack delay
must be recalculated.
Add quic_compute_ack_delay_us() function to compute the ack delay from the value
of the time a packet was received. Used only when a packet with a new largest
packet number.
The call to quic_dflt_transport_params_cpy() is already first done by
quic_transport_params_init() which is a good thing. But this function was also
called each time we parsed a transport parameters with quic_transport_param_decode(),
re-initializing to default values some of them. The transport parameters concerned
by this bug are the following:
- max_udp_payload_size
- ack_delay_exponent
- max_ack_delay
- active_connection_id_limit
So, let's remove this call to quic_dflt_transport_params_cpy() which has nothing
to do here!
As we do not have any task to be wake up by the poller after sendto() error,
we add an sendto() error counter to the quic_conn struct.
Dump its values from qc_send_ppkts().
This patch adds a lock on the struct dgram_conn to ensure
that an other thread cannot trash a fd or alter its status
while the current thread processing it on for send/receive/connect
operations.
Starting with the 2.4 version this could cause a crash when a DNS
request is failing, setting the FD of the dgram structure to -1. If the
dgram structure is reused after that, a read access to fdtab[-1] is
attempted. The crash was only triggered when compiled with ASAN.
In previous versions the concurrency issue also exists but is less
likely to crash.
This patch must be backported until v2.4 and should be
adapt for v < 2.4.
The statefile before this patch can only parse lines within 512
characters, now as we made the value to 2000, it can support a
line of length of 2kB.
This patch fixes GitHub issue #1530.
It should be backported to all stable releases.
As was first reported by Ilya in issue #1513, compiling with gcc-12
adds warnings about size 0 around each BUG_ON() call due to the
ABORT_NOW() macro that tries to dereference pointer value 1.
The problem is known, seems to be complex inside gcc and could only
be worked around for now by adjusting a pointer limit so that the
warning still catches NULL derefs in the first page but not other
values commonly used in kernels and boot loaders:
https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=91f7d7e1b
It's described in more details here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104657https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103768
And some projects had to work around it using various approaches,
some of which are described in the bugs reports above, plus another
one here:
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/HLK3BHP2T3FN6FZ46BIPIK3VD5FOU74Z/
In haproxy we can hide it by hiding the pointer in a DISGUISE() macro,
but this forces the pointer to be loaded into a register, so that
register is lost precisely where we want to get the maximum of them.
In our case we purposely use a low-value non-null pointer because:
- it's mandatory that this value fits within an unmapped page and
only the lowest one has this property
- we really want to avoid register loads for the address, as these
will be lost and will complicate the bug analysis, and they tend
to be used for large addresses (i.e. instruction length limit).
- the compiler may decide to optimize away the null deref when it
sees it (seen in the past already)
As such, the current workaround merged in gcc-12 is not effective for
us.
Another approach consists in using pragmas to silently disable
-Warray-bounds and -Wnull-dereference only for this part. The problem
is that pragmas cannot be placed into macros.
The resulting solution consists in defining a forced-inlined function
only to trigger the crash, and surround the dereference with pragmas,
themselves conditionned to gcc >= 5 since older versions don't
understand them (but they don't complain on the dereference at least).
This way the code remains the same even at -O0, without the stack
pointer being modified nor any address register being modified on
common archs (x86 at least). A variation could have been to rely on
__builtin_trap() but it's not everywhere and it behaves differently
on different platforms (undefined opcode or a nasty abort()) while
the segv remains uniform and effective.
This may need to be backported to older releases once users start to
complain about gcc-12 breakage.
The obsolete stats states STAT_ST_* were marked as deprecated with recent
commit 6ef1648dc ("CLEANUP: stats: rename the stats state values an mark
the old ones deprecated"), except that this feature requires gcc 6 and
above. Let's use the macro that depends on this condition instead.
The issue appeared on 2.6-dev9 so no backport is needed.
Gcc 6 and above support placing an attribute on an enum's value. This
is convenient for marking some values as deprecated. We just need the
macro because older versions fail to parse __attribute__() there.
On Linux the interval before starting to send TCP keep-alive packets
is defined by TCP_KEEPIDLE. MacOS has an equivalent with TCP_KEEPIDLE,
which also uses seconds as a unit, so it's possible to simply remap the
definition of TCP_KEEPIDLE to TCP_KEEPALIVE there and get it to seamlessly
work. The other settings (interval and count) are not present, though.
The STAT_ST_* values have been abused by virtually every applet and CLI
keyword handler, and this must not continue as it's a source of bugs and
of overly complicated code.
This patch renames the states to STAT_STATE_*, and keeps the previous
enum while marking each entry as deprecated. This should be sufficient to
catch out-of-tree code that might rely on them and to let them know what
to do with that.
Now that the CLI's print context is alone in the appctx, it's possible
to refine the appctx's ctx layout so that the cli part matches exactly
a regular svcctx, and as such move the CLI context into an svcctx like
other applets. External code will still build and work because the
struct cli perfectly maps onto the struct cli_print_ctx that's located
into svc.storage. This is of course only to make a smooth transition
during 2.6 and will disappear immediately after.
A tiny change had to be applied to the opentracing addon which performs
direct accesses to the CLI's err pointer in its own print function. The
rest uses the standard cli_print_* which were the only ones that needed
a small change.
The whole "ctx.cli" struct could be tagged as deprecated so that any
possibly existing external code that relies on it will get build
warnings, and the comments in the struct are pretty clear about the
way to fix it, and the lack of future of this old API.
Just like for the TCP service, let's move the context away from
appctx.ctx. A new struct hlua_http_ctx was defined, reserved in
hlua_applet_http_init() and used everywhere else. Similarly, the
task dump code will no more report decoded stack traces in case
these services would be involved. That may be solved later.
The use-service mechanism for Lua in TCP mode relies on the
hlua_tcp storage in appctx->ctx. We can move its definition to
hlua.c and simply use appctx_reserve_svcctx() to reserve and access
the stoage. One tiny side effect is that the task dump used in panics
will not show anymore the Lua call stack in its trace. For this a
better API is needed from the Lua code to expose a function that does
the job from an appctx.
The Lua cosockets were using appctx.ctx.hlua_cosocket. Let's move this
to a local definition of "hlua_csk_ctx" in hlua.c, which is allocated
from the appctx by hlua_socket_new(). There's a notable change which is
that, while previously the xref link with the peer was established with
the appctx, it's now in the hlua_csk_ctx. This one must then hold a
pointer to the appctx. The code was adjusted accordingly, and now that
part of the code doesn't use the appctx.ctx anymore.
The context was moved to a local definition in the cache code, and
there's nothing specific to the cache anymore in the appctx. The
struct is stored into the appctx's storage area via the svcctx.
This one has been misused for a while as well, it's time to deprecate it
since we don't use it anymore. It will be removed in 2.7 and for now is
only marked as deprecated. Since we need to guarantee that it's zeroed
before starting any applet or CLI command, it was moved into an anonymous
union where its sibling is not marked as deprecated so that we can
continue to initialize it without triggering a warning.
If you found this commit after a bisect session you initiated to figure
why you got some build warnings and don't know what to do, have a look
at the code that deals with the "show fd", "show sess" or "show servers"
commands, as it's supposed to be self-explanatory about the tiny changes
to apply to your code to port it. If you find APPLET_MAX_SVCCTX to be
too small for your use case, either kindly ask for a tiny extension
(and try to get your code merged), or just use a pool.
The generic context variables p0/p1/p2, i0/i1, o0/o1 have been abused
and causing trouble for too long, it's time to remove them now that
they are not used anymore.
However the risk that external code still uses them is not nul and we
had not warned before about their removal. Let's mark them deprecated
in 2.6 and removed in 2.7. This will let external code continue to work
(as well as it could if it misuses them), with a strong encouragement
on updating it.
If you found this commit after a bisect session you initiated to figure
why you got some build warnings and don't know what to do, have a look
at the code that deals with the "show fd", "show env" or "show servers"
commands, as it's supposed to be self-explanatory about the tiny changes
to apply to your code to port it. If you find APPLET_MAX_SVCCTX to be
too small for your use case, either kindly ask for a tiny extension
(and try to get your code merged), or just use a pool.
The httpclient already uses its own pointer and only used to store this
single pointer into the appctx.ctx field. Let's just move it to the
svcctx and remove this entry from the appctx union.
The ring watch flags (wait, seek end) were dangerously passed via ctx.cli.i0
from "show buf" in sink.c:cli_parse_show_events(), or implicitly reset in
"show errors". That's very unconvenient, difficult to follow, and prone to
short-term breakage.
Let's pass an extra argument to ring_attach_cli() to take these flags, now
defined in ring-t.h as RING_WF_*, and let the function set them itself
where appropriate (still ctx.cli.i0 for now).
Instead of having a struct that contains a single pointer in the appctx
context, let's directly use the generic context pointer and get rid of
the now unused sft.ptr entry.
These two commands use distinct parse/release functions but a common
iohandler, thus they need to keep the same context. It was created
under the name "commit_cacrlfile_ctx" and holds a large part of the
pointers (6) and the ca_type field that helps distinguish between
the two commands for the I/O handler. It looks like some of these
fields could have been merged since apparently the CA part only
uses *cafile* and the CRL part *crlfile*, while both old and new
are of type cafile_entry and set only for each type. This could
probably even simplify some parts of the code that tries to use
the correct field.
These fields were the last ones to be migrated thus the appctx's
ssl context could finally be removed.
The command doesn't really need any storage since there's only a parser,
but since it used this context, there might have been plans for extension,
so better continue with a persistent one. Only old_ckchs, new_ckchs, and
path were being used from the appctx's ssl context. There ones moved to
the local definition, and the two former ones were removed from the appctx
since not used anymore.
This command only really uses old_ckchs, cur_ckchs and the index
in which the transaction was stored. The new structure "show_cert_ctx"
only has these 3 fields, and the now unused "cur_ckchs" and "index"
could be removed from the shared ssl context.
Now this command doesn't share any context anymore with "show cafile"
nor with the other commands. The previous "cur_cafile_entry" field from
the applet's ssl context was removed as not used anymore. Everything was
moved to show_crlfile_ctx which only has 3 fields.
Saying that the layout and usage of the various variables in the ssl
applet context is a mess would be an understatement. It's very hard
to know what command uses what fields, even after having moved away
from the mix of cli and ssl.
Let's extract the parts used by "show cafile" into their own structure.
Only the "show_all" field would be removed from the ssl ctx, the other
fields are still shared with other commands.
This context is used by CLI keywords registered by Lua. We can take
it out of the appctx and use the generic command context allocation so
that the appctx doesn't have to declare a specific one anymore. The
context is created during parsing.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing (both in the CLI and HTTP).
The change looks large but it's particularly mechanical. The context
initialization appears in stats.c and http_ana.c. The context is used
in stats.c and resolvers.c since "show stat resolvers" points there.
That's the reason why the definition moved to stats.h. "show info"
and "show stat" continue to share the same state definition for now.
Nothing else was modified.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing. The code also uses st2 which deserves being
addressed in separate commit.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing. Many commands, including pure parsers, use this
context but that's not a problem as it's designed to be used this way.
Due to this, many lines are changed but that's in fact a replacement of
"appctx->ctx.map" with "ctx->". Note that the code also uses st2 which
deserves being addressed in separate commit.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing. The code also uses st2 which deserves being
addressed in separate commit.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing.
The code still has room for improvement, such as in the "flags" field
where bits are hard-coded, but they weren't modified.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing.
Instead of using existing fields and having to put keyword-specific
contexts in the applet definition, let's have the appctx provide a
generic storage area that's currently large enough for existing CLI
commands and small applets, and a function to allocate that storage.
The function will be responsible for verifying that the requested size
fits in the area so that the caller doesn't need to add specific checks;
it is validated during development as this size is static and will
not change at runtime. In addition the caller doesn't even need to
free() the area since it's part of an existing context. For the
caller's convenience, a context pointer "svcctx" for the command is
also provided so that the allocated area can be placed there (or
possibly any other one in case a larger area is needed).
The struct's layout has been temporarily complicated by adding one
level of anonymous union on top of the "ctx" one. This will allow us
to preserve "ctx" during 2.6 for compatibility with possible external
code and get rid of it in 2.7. This explains why the diff extends to
the whole "ctx" union, but a "git show -b" shows that only one extra
layer was added. In order to make both the svcctx pointer and its
storage accessible without further enlarging the appctx structure,
both svcctx and the storage share the same storage as the ctx part.
This is done by having them placed in the union with a protected
overlapping area for svcctx, for which a shadow member is also
present in the storage area:
union {
void* svcctx; // variable accessed by services
struct {
void *shadow; // shadow of svcctx;
char storage[]; // where most services store their data
};
union { // older commands store here and ignore svcctx
...
} ctx;
};
I.e. new applications will use appctx->svcctx while older ones will be
able to continue to use appctx->ctx.*
The whole area (including the pointer's context) is zeroed before any
applet is initialized, and before CLI keyword processor's first invocation,
as it is an important part of the existing keyword processors, which makes
CLI keywords effectively behave like applets.
The "show ssl cert" command mixes some generic pointers from the
"ctx.cli" struct with context-specific ones from "ctx.ssl" while both
are in a union. Amazingly, despite the use of both p0 and i0 to store
respectively a pointer to the current ckchs and a transaction id, there
was no overlap with the other pointers used during these operations,
but should these fields be reordered or slightly updated this will break.
Comments were added above the faulty functions to indicate which fields
they are using.
This needs to be backported to 2.5.
The "show ssl ca-file <name>" command mixes some generic pointers from
the "ctx.cli" struct and context-specific ones from "ctx.ssl" while both
are in a union. The i0 integer used to store the current ca_index overlaps
with new_crlfile_entry which is thus harmless for now but is at the mercy
of any reordering or addition of these fields. Let's add dedicated fields
into the ssl structure for this.
Comments were added on top of the affected functions to indicate what they
use.
This needs to be backported to 2.5.
The "show ca-file" and "show crl-file" commands mix some generic pointers
from the "ctx.cli" struct and context-specific ones from "ctx.ssl" while
both are in a union. It's fortunate that the p0 pointer in use is located
immediately before the first one used (it overlaps with next_ckchi_link,
and old_cafile_entry is safe). But should these fields be reordered or
slightly updated this will break.
Comments were added on top of the affected functions to indicate what they
use.
This needs to be backported to 2.5.
Try to create a "default" resolvers section at startup, but does not
display any error nor warning. This section is initialized using the
/etc/resolv.conf of the system.
This is opportunistic and with no guarantee that it will work (but it should
on most systems).
This is useful for the httpclient as it allows to use the DNS resolver
without any configuration in most of the cases.
The function is called from the httpclient_pre_check() function to
ensure than we tried to create the section before trying to initiate the
httpclient. But it is also called from the resolvers.c to ensure the
section is created when the httpclient init was disabled.
In flags set on the endpoints, some are set by endpoints itself and some are
set by the app layer. To help flags manipulations, 2 masks have been
added. The first one, CS_EP_ENDP_MASK, for all flags that an endpoint may
set. The other one, CS_EP_APP_MASK, for flags that the app layer may set.
This patch is mandatory for the next commit.
This is required when the retransmitted frame types when the mux is released.
We add a counter for the number of streams which were opened or closed by the mux.
After the mux has been released, we can rely on this counter to know if the STREAM
frames are retransmitted ones or not.
That's similar to what was done for conn_streams and connections. The
flags were only set exactly when the relevant pointers were allocated,
so better test the pointer than the flag and stop setting the flag.
Just like for the conn_stream, now that these addresses are dynamically
allocated, there is no single case where the pointer is set without the
corresponding flag, and the flag is used as a permission to dereference
the pointer. Let's just replace the test of the flag with a test of the
pointer and remove all flag assignment. This makes the code clearer
(especially in "if" conditions) and saves the need for future code to
think about properly setting the flag after setting the pointer.
These flags indicate that the ->src or ->dst field in the conn_stream
is not null, which is something the caller already sees (and even tests
from the two sets of functions that set them). They maintain some burden
because an agent trying to set a source or destination has to manually
set the flags in addition to setting the pointer, so they provide no
value anymore, let's drop them.
This flag is no longer needed now that it must always match the presence
of a destination address on the backend conn_stream. Worse, before previous
patch, if it were to be accidently removed while the address is present, it
could result in a leak of that address since alloc_dst_address() would first
be called to flush it.
Its usage has a long history where addresses were stored in an area shared
with the connection, but as this is no longer the case, there's no reason
for putting this burden onto application-level code that should not focus
on setting obscure flags.
The only place where that made a small difference is in the dequeuing code
in case of queue redistribution, because previously the code would first
clear the flag, and only later when trying to deal with the queue, would
release the address. It's not even certain whether there would exist a
code path going to connect_server() without calling pendconn_dequeue()
first (e.g. retries on queue timeout maybe?).
Now the pendconn_dequeue() code will rely on SF_ASSIGNED to decide to
clear and release the address, since that flag is always set while in
a server's queue, and its clearance implies that we don't want to keep
the address. At least it remains consistent and there's no more risk of
leaking it.
If the request channel buffer is full, H3 demuxing must be interrupted
on the stream until some read is performed. This condition is reported
if the HTX stream buffer qcs.rx.app_buf is full.
In this case, qcs instance is marked with a new flag QC_SF_DEM_FULL.
This flag cause the H3 demuxing to be interrupted. It is cleared when
the HTX buffer is read by the conn-stream layer through rcv_buf
operation.
When the flag is cleared, the MUX tasklet is woken up. However, as MUX
iocb does not treat Rx for the moment, this is useless. It must be fix
to prevent possible freeze on POST transfers.
In practice, for the moment the HTX buffer is never full as the current
Rx code is limited by the quic-conn receive buffer size and the
incomplete flow-control implementation. So for now this patch is not
testable under the current conditions.
It seems this multiplier ended up in oblivion. Indeed a multiplier must be
applied to the loss delay expressed as an RTT multiplier: 9/8.
So, some packets were detected as lost too soon, leading to be retransmitted too
early!
A crash is possible under such circumtances:
- The congestion window is drastically reduced to its miniaml value
when a quic listener is experiencing extreme packet loss ;
- we enqueue several STREAM frames to be resent and some of them could not be
transmitted ;
- some of the still in flight are acknowledged and trigger the
stream memory releasing ;
- when we come back to send the remaing STREAM frames, haproxy
crashes when it tries to build them.
To fix this issue, we mark the STREAM frame as lost when detected as lost.
Then a lookup if performed for the stream the STREAM frames are attached
to before building them. They are released if the stream is no more available
or the data range of the frame is consumed.
Modify qc_send_app_pkt() to distinguish the case where it sends new data
against the case where it sends old data during probing retransmissions.
We add <old_data> boolean parameter to this function to do so. The mux
never directly send old data when probing retransmissions are needed by
the connection.
We want to be able to resend frames from list of frames during handshakes to
resend datagrams with the same frames as during the first transmissions.
This leads to decrease drasctically the chances of frame fragmentation due to
variable lengths of the packet fields. Furthermore the frames were not duplicated
when retransmitted from a packet to another one. This must be the case only during
packet loss dectection.
qc_dup_pkt_frms() is there to duplicate the frames from an input list to an output
list. A distinction is made between STREAM frames and the other ones because we
can rely on the "acknowledged offset" the aim of which is to track the number
of bytes which were acknowledged from TX STREAM frames.
qc_release_frm() in addition to release the frame passed as parameter, also mark
the duplicate STREAM frames as acknowledeged.
qc_send_hdshk_pkts() is the qc_send_app_pkts() counterpart to send datagrams from
at most two list of frames to be able to coalesced packets from two different
packet number spaces
qc_dgrams_retransmit() is there to probe the peer with datagrams depending on the
need of the packet number spaces which must be flag with QUIC_FL_PKTNS_PROBE_NEEDED
by the PTO timer task (qc_process_timer()).
Add QUIC_FL_CONN_RETRANS_NEEDED connection flag definition to mark a quic_conn
struct as needing a retranmission.
Add QUIC_FL_PKTNS_PROBE_NEEDED to mark a packet number space as needing a
datagram probing.
Set these flags from process_timer() to trigger datagram probings.
Do not initiate anymore datagrams probing from any quic encryption level.
This will be done from the I/O handlers (quic_conn_io_cb() during handshakes and
quic_conn_app_io_cb() after handshakes).
Add QUIC_FL_TX_PACKET_COALESCED flag to mark a TX packet as coalesced with others
to build a datagram.
Ensure we do not directly retransmit frames from such coalesced packets. They must
be retransmitted from their packet number spaces to avoid duplications.
We want to track the frames which have been duplicated during retransmissions so
that to avoid uselessly retransmitting frames which would already have been
acknowledged. ->origin new member is there to store the frame from which a copy
was done, ->reflist is a list to store the frames which are copies.
Also ensure all the frames are zeroed and that their ->reflist list member is
initialized.
Add QUIC_FL_TX_FRAME_ACKED flag definition to mark a TX frame as acknowledged.
Define 2 new callback for qcc_app_ops : attach and detach. They are
called when a qcs instance is respectively allocated and freed. If
implemented, they can allocate a custom context stored in the new
abstract field ctx of qcs.
For now, h3 and hq-interop does not use these new callbacks. They will
be soon implemented by the h3 layer to allocate a context used for
stateful demuxing.
This change is required to support the demuxing of H3 frames bigger than
a buffer.
Improve the reception for STREAM frames. In qcc_recv(), if the frame is
bigger than the remaining space in rx buffer, do not reject it wholly.
Instead, copy as much data as possible. The rest of the data is
buffered.
This is necessary to handle H3 frames bigger than a buffer. The H3 code
does not demux until the frame is complete or the buffer is full.
Without this, the transfer on payload larger than the Rx buffer can
rapidly freeze.
Add new qcs fields to count the sum of bytes received for each stream.
This is necessary to enforce flow-control for reception on the peer.
For the moment, the implementation is partial. No MAX_STREAM_DATA or
FLOW_CONTROL_ERROR are emitted. BUG_ON statements are here as a
remainder.
This means that for the moment we do not support POST payloads greater
that the initial max-stream-data announced (256k currently).
At least, we now ensure that we never buffer a frame which overflows the
flow-control limit : this ensures that the memory consumption per stream
should stay under control.
qcc_get_stream() was used when qcs and qc_stream_desc shared the same
node-tree. This is not the case anymore since
e4301da5ed
MINOR: quic-stream: use distinct tree nodes for quic stream and qcs
Now this function is broken as the qcc tree only contains qcs.
Thankfully it is unused so it can be removed without impact.
Low footprint client machines may not have enough memory to download a
complete 16KB TLS record at once. With the new option the maximum
record size can be defined on the server side.
Note: Before limiting the the record size on the server side, a client should
consider using the TLS Maximum Fragment Length Negotiation Extension defined
in RFC6066.
This patch fixes GitHub issue #1679.
If the "close-spread-time" option is set to "infinite", active
connection closing during a soft-stop can be disabled. The 'connection:
close' header or the GOAWAY frame will not be added anymore to the
server's response and active connections will only be closed once the
clients disconnect. Idle connections will not be closed all at once when
the soft-stop starts anymore, and each idle connection will follow its
own timeout based on the multiple timeouts set in the configuration (as
is the case during regular execution).
This feature request was described in GitHub issue #1614.
This patch should be backported to 2.5. It depends on 'MEDIUM: global:
Add a "close-spread-time" option to spread soft-stop on time window'.
While weak symbols were finally fixed with commit fb1b6f5bc ("BUILD:
compiler: use a more portable set of asm(".weak") statements"), it
was an error to think that initcall symbols were also weak. They must
not be and they're only global. The reason is that any externally
linked code loaded as a .so would drop its weak symbols when being
loaded, hence its initcalls that may contain various function
registration calls.
The ambiguity came from the fact that we initially reused the initcall's
HA_GLOBL macro for OSX then generalized it, then turned it to a choice
between .globl and .weak based on the OS, while in fact we needed a
macro to define weak symbols.
Let's rename the macro to HA_WEAK() to make it clear it's only for weak
symbols, and redefine HA_GLOBL() that initcall needs.
This will need to be backported wherever the commit above is backported
(at least 2.5 for now).
Instead of seeing each location manipulate the fcntl() themselves and
often forget to check previous flags, let's centralize the functions to
do this. It also allows to drop fcntl.h from most call places and will
ease the adoption of different OS-specific mechanisms if needed. Note
that the fd_set_nonblock() function purposely doesn't check the previous
flags as it's meant to be used on new FDs only.
__comp_fetch_init() only presets the maxzlibmem, and only when both
USE_ZLIB and DEFAULT_MAXZLIBMEM are set. The intent is to preset a
default value to protect the system against excessive memory usage
when no setting is set by the user.
Nowadays the entry in the global struct is always there so there's no
point anymore in passing via a constructor to possibly set this value.
Let's go the cleaner way by always presetting DEFAULT_MAXZLIBMEM to 0
in defaults.h unless these conditions are met, and always assigning it
instead of pre-setting the entry to zero. This is more straightforward
and removes some ifdefs and the last constructor. In addition, now the
setting has a chance of being found.
On some systems, the hard limit for ulimit -n may be huge, in the order
of 1 billion, and using this to automatically compute maxconn doesn't
work as it requires way too much memory. Users tend to hard-code maxconn
but that's not convenient to manage deployments on heterogenous systems,
nor when porting configs to developers' machines. The ulimit-n parameter
doesn't work either because it forces the limit. What most users seem to
want (and it makes sense) is to respect the system imposed limits up to
a certain value and cap this value. This is exactly what fd-hard-limit
does.
This addresses github issue #1622.
Almost all of our hash-based LB algorithms are implemented as special
cases of something that can now be achieved using sample expressions,
and some of them have adopted some options to adapt their behavior in
ways that could also be achieved using converters.
There are users who want to hash other parameters that are combined
into variables, and who set headers from these values and use
"balance hdr(name)" for this.
Instead of constantly implementing specific options and having users
hack around when they want a real hash, let's implement a native hash
mode that applies to a standard sample expression. This way, any
fetchable element (including variables) may be used to construct the
hash, even modified by any converter if desired.
This function's purpose is to wake up either a local or remote task,
bypassing the tree-based run queue. It is meant for fast wakeups that
are supposed to be equivalent to those used with tasklets, i.e. a task
had to pause some processing and can complete (typically a resource
becomes available again). In all cases, it's important to keep in mind
that the task must have gone through the regular scheduling path before
being blocked, otherwise the task priorities would be ignored.
The reason for this is that some wakeups are massively inter-thread
(e.g. server queues), that these inter-thread wakeups cause a huge
contention on the shared runqueue lock. A user reported 47% CPU spent
in process_runnable_tasks with only 32 threads and 80k requests in
queues. With this mechanism, purely one-to-one wakeups can avoid
taking the lock thanks to the mt_list used for the shared tasklet
queue.
Right now the shared tasklet queue moves everything to the TL_URGENT
queue. It's not dramatic but it would seem better to have a new shared
list dedicated to tasks, and that would deliver into TL_NORMAL, for an
even better fairness. This could be improved in the future.
This adds a call to function <fct> to the list of functions to be called at
the step just before the configuration validity checks. This is useful when you
need to create things like it would have been done during the configuration
parsing and where the initialization should continue in the configuration
check.
It could be used for example to generate a proxy with multiple servers using
the configuration parser itself. At this step the trash buffers are allocated.
Threads are not yet started so no protection is required. The function is
expected to return non-zero on success, or zero on failure. A failure will make
the process emit a succinct error message and immediately exit.
A conn-stream is never detached from an endpoint or an application alone,
except on a reset. Thus, to avoid any error, these functions are now
private. And cs_destroy() function is added to destroy a conn-stream. This
function is called when a stream is released, on the front and back
conn-streams, and when a health-check is finished.
This function does not release the applet but only call the applet release
callback. It is equivalent to cs_conn_shut() but for applets. Thus the
function is renamed cs_applet_shut().
These functions don't close the connection but only perform shutdown for
reads and writes at the mux level. It is a bit ambiguous. Thus,
cs_conn_close() is renamed cs_conn_shut() and cs_conn_drain_and_close() is
renamed cs_conn_drain_and_shut(). These both functions rely on
cs_conn_shutw() and cs_conn_shutr().
Starting from OpenSSLv3, providers are at the core of cryptography
functions. Depending on the provider used, the way the SSL
functionalities work could change. This new 'show ssl providers' CLI
command allows to show what providers were loaded by the SSL library.
This is required because the provider configuration is exclusively done
in the OpenSSL configuration file (/usr/local/ssl/openssl.cnf for
instance).
A new line is also added to the 'haproxy -vv' output containing the same
information.
