In Travis, the full test suite doesn't run on PRs for point release branches, just on commits for them. I think this behavior makes sense because what we actually want to test before a point release is the exact commit we want to release after any squashing/merging has been done. This PR modifies Azure to match this behavior.
After this PR lands, I need to update the tests required to pass on GitHub.
This PR uses pipstrap to bootstrap the venv used to build Windows installers. This effectively pin all build dependencies, since pynsist is already installed through pip_install.py script.
* Use pipstrap
* Pin also NSIS version
* acme: re-populate uri in deactivate_authorization
* Use fresh authorizations in dry runs
--dry-run now deactivates 'valid' authorizations if it encounters them
when creating a new order.
Resolves#5116.
* remove unused code
* typo in local-oldest-requirements
* better error handling
* certbot-ci: AUTHREUSE to 100 + unskip dry-run test
* improve test coverage for error cases
* restore newline to local-oldest-requirements.txt
This pull request addresses #7451 by removing the deprecated flags.
* Dropped deprecated flags from commands
* Updated changelog for dropped flags and deleted outdated tests
* removed init-script part of apache test
I tried to finish up #7214 by removing the code in acme but we can't really do that until #7478 is resolved which we cannot do until we release 0.40.0.
Since we have to wait, this PR adds deprecation warnings for code that uses the TLS-SNI-01 code or was only used by the long deprecated TLS-SNI-01 code.
I'd like this PR to land before our next release.
* Deprecate more code related to TLS-SNI-01.
* Assert about warning message.
We don't package rebuild_dependencies.py so I don't think we need to mention changes to it in our changelog which is primarily read by users and packagers.
This pull request ensures that we use distro package in all the distribution version detection. It also replaces the custom systemd /etc/os-release parsing and adds a few version fingerprints to Apache override selection.
Fixes: #7405
* Revert "Try to use platform.linux_distribution() before distro equivalent (#7403)"
This reverts commit ca3077d034.
* Use distro for all os detection code
* Address review comments
* Add changelog entry
* Added tests
* Fix tests to return a consistent os name
* Do not crash on non-linux systems
* Minor fixes to distro compatibility checks
* Make the tests OS independent
* Update certbot/util.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Skip linux specific tests on other platforms
* Test fixes
* Better test state handling
* Lower the coverage target for Windows tests
`certbot-compatibility-test` is using code in `acme` that I proposed making private and not trivially importable in https://github.com/certbot/certbot/issues/5775.
To fix it, I switched to using Certbot's test utilities which I proposed keeping public to help with writing tests for plugins. When doing this I had to change the name of the key because `rsa1024_key.pem` doesn't exist in Certbot.
I also deleted the keys in `certbot-compatibility-test`'s testdata because because they are unused.
This is a big part of #7214. It removes all references to TLS-SNI-01 outside of acme (and pytest.ini). Those changes will come in a subsequent PR. I thought this one was getting big enough.
* Remove references to TLS-SNI-01 in Apache plugin
* Remove references to TLS-SNI-01 from certbot-nginx
* Remove references to TLS-SNI from Certbot.
* Remove TLS-SNI reference from docs
* add certbot changelog
* Clarify test behavior
I wanted to polish the changelog a bit. Changes made are:
* We don't ship our test farm tests so including info about them in our changelog seems unnecessary.
* I combined and expanded the info about the deprecation of Python 3.4.
While working on #7214, I noticed that certbot.plugins.common.TLSSNI01 wasn't printing a deprecation warning and it was still being used in our Apache plugin. This PR fixes that.
Fixes#7007
Python 3.4 is [EOL](https://www.python.org/dev/peps/pep-0429/), and only Python 3.x version available for CentOS 6 through EPEL is this version, and so is used by `certbot-auto`, the only official way to install Certbot on this platform.
This unpleasant situation becomes a little more uncomfortable, considering that the newest `pip` version (19.2) [just dropped Python 3.4 support](https://github.com/pypa/pip/issues/6685) and will refuse to start on this Python version. We can expect a lot of dependencies to follow this path now.
One direct result of this situation is that a fix to support correctly the ARM platforms requires to upgrade `pip` to 19.2 for `certbot-auto`. So this is not possible right now.
Then, let's upgrade Certbot instances on CentOS 6 to a supported version of Python 3.
This PR proposes a new bootstrap approach for CentOS 6 platform, `BootstrapRpmPython3Legacy`, that will install Python 3.6 from [SCL](https://www.softwarecollections.org) (the latest one available for now on CentOS 6). In term of Python 3 specific bootstrap methods, I take the occasion here to completely separate the bootstrap of CentOS 6 as a legacy system, from the RPM-based newest systems (like Fedora 29+) that are simply dropping support for Python 2.x. This is in prevision of future migration for all systems on Python 3.x, that is a different problematic than supporting old systems.
* Add logic
* Rebuilt letsencrypt-auto
* Fix logic
* Focus on specific packages
* Maintain PATH for further invocations of letsencrypt-auto after bootstrap.
* Various corrections
* Fix farm test for RHEL6
* Working centos6 letsencrypt-auto self tests
* Fix test_sdist for CentOS 6
* Corrections
* Work in progress
* Working configuration
* Fix typo
* Remove EPEL. Add a test.
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Improvements after review
* Improvements
* Add a comment
* Add a test
* Update a test
* Corrections
* Update function return
* Work in progress
* Correct behavior on oracle linux 6.
* Corrections
* Rebuild script
* Add letsencrypt-auto tests for oraclelinux6
* Update tox.ini
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Remove specific code for scientific linux
* Change some variables names
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Various corrections
* Fix tests
* Add a comment
* Update message
* Fix test message
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update scripts
* More focused assertion
* Add back a test
* Update script
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Check quiet mode
* Add changelog
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
This PR creates a pipeline triggered on tag push matching v0.* (eg. v0.40.0).
Once triggered, this pipeline will build the windows installer, and run integration tests on it, like for the pipeline run nightly.
I also add a simple script to extract from CHANGELOG.md file to extract the relevant part to put it in the body of the GitHub release. I believe it makes things nicer.
* Create release pipeline
* Relax condition on tags
* Put beta keyword
* Update job name
* Fix release pipeline
Over the weekend, nightly tests on Windows failed for certbot-dns-google: https://dev.azure.com/certbot/web/build.aspx?pcguid=74ef9c03-9faf-405b-9d03-9acf8c43e8d6&builduri=vstfs%3a%2f%2f%2fBuild%2fBuild%2f72
The error occurred inside `oauth2client`'s locking code and the failure seems spurious as it did not reproduce this morning: https://dev.azure.com/certbot/certbot/_build/results?buildId=73
I could not find a relevant changelog entry in `oauth2client` saying they've fixed the problem, but the problematic code no longer exists in `oauth2client>=4.0`. This PR updates our minimum dependency required in an attempt to avoid spurious failures for us in the future. The only downside I am aware of is it'll make it harder for certbot-dns-google to be packaged in Debian Old Stable or Ubuntu 16.04, but I don't expect either of those things to happen anytime soon.
* bump oauth2client dep
* Update dev_constraints.txt.
* Add changelog entry for packagers.
