Also, update `dev-cli.ini` example to use new flag.
Although https://github.com/bw2/ConfigArgParse/pull/216 allowed setting a `count` action value in a config file, our default detection system won't let us use that functionality. While we should eventually fix that, for now, let developers have a cli.ini with a higher logging level by adding this flag.
Note that this flag is intended to work the same way adding `-vvv`s does; that is, as a modifier to the pre-set level, rather than setting the absolute level. The number it is set to is equivalent to the number of `v`s that would otherwise have been passed, with "2" as the current maximum effective number of levels (warning --> info --> debug).
* Add --verbose-level flag for devs to set in cli.ini
* Update dev-cli.ini to use new flag
* use poetry 1.2.0a1
* pin pip normally
* use normal constraints file with pipstrap
* remove unused STRIP_HASHES var
* Check for old poetry versions
* keep pip, setuptools, and wheel pinned in oldest
* remove strip hashes
* pin back pip
* fix new lint error
* Deprecate usage of IConfig as a singleton in Certbot
* Fix local oldest requirements
* Add changelog
* Add tests for certbot.crypto_util.init_save_* functions
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Add instructions for setting up a cronjob in the docs
* Be more specific about where the cron entry will be created
Co-authored-by: alexzorin <alex@zorin.id.au>
* Correct &s to &s
Co-authored-by: alexzorin <alex@zorin.id.au>
* Correct other & to &
Co-authored-by: alexzorin <alex@zorin.id.au>
* De-weasel the double-scheduled-task comment
Co-authored-by: alexzorin <alex@zorin.id.au>
* Have users create directory hooks instead of command line hooks
* Use sudo in command
Co-authored-by: alexzorin <alex@zorin.id.au>
* tell windows users to ignore these instructions instead of telling them they won't work
* Use the same commands that we have in the general instructions
Co-authored-by: alexzorin <alex@zorin.id.au>
* later printing of renewal and install retry advice
Move printing of advice for automated renewal, and retrying installation
in case of failure, towards the end of `run` and `certonly`.
Also adds some renewal advice for the --csr case (no autorenewal).
* update renewal advice for preconfigured-renewal
* rewrite in terms of "NEXT STEPS" for run/certonly
* fix lint
* re-add "Could not install certificate"
* update --csr renewal advice
* rewrite non-preconfigured-renewal renewal advice
* Remove no names found in configuration files because it sounds like an error but actually it is fine
* fix test
* Pose question more grammatically and specifically, and remove extra space
* fix lint
Co-authored-by: Alex Zorin <alex@zorin.id.au>
1.10.0 was a bad release and this breaks our oldest Boulder tests.
I bumped the version to 1.10.0 in #8852 to get access to a new public display_util API, but that was the release with the broken deprecation of `--manual-public-ip-logging-ok`. So let's bump it to 1.10.1.
Streamline and reorganize Certbot's CLI output.
This change is a substantial command-line UX overhaul,
based on previous user research. The main goal was to streamline
and clarify output. To see more verbose output, use the -v or -vv flags.
---
* nginx,apache: CLI logging changes
- Add "Successfully deployed ..." message using display_util
- Remove IReporter usage and replace with display_util
- Standardize "... could not find a VirtualHost ..." error
This changes also bumps the version of certbot required by certbot-nginx
and certbot-apache to take use of the new display_util function.
* fix certbot_compatibility_test
since the http plugins now require IDisplay, we need to inject it
* fix dependency version on certbot
* use better asserts
* try fix oldest deps
because certbot 1.10.0 depends on acme>=1.8.0, we need to use
acme==1.8.0 in the -oldest tests
* cli: redesign output of new certificate reporting
Changes the output of run, certonly and certonly --csr. No longer uses
IReporter.
* cli: redesign output of failed authz reporting
* fix problem sorting to be stable between py2 & 3
* add some catch-all error text
* cli: dont use IReporter for EFF donation prompt
* add per-authenticator hints
* pass achalls to auth_hint, write some tests
* exclude static auth hints from coverage
* dont call auth_hint unless derived from .Plugin
* dns fallback hint: dont assume --dns-blah works
--dns-blah won't work for third-party plugins, they need to be specified
using --authenticator dns-blah.
* add code comments about the auth_hint interface
* renew: don't restart the installer for dry-runs
Prevents Certbot from superfluously invoking the installer restart
during dry-run renewals. (This does not affect authenticator restarts).
Additionally removes some CLI output that was reporting the fullchain
path of the renewed certificate.
* update CHANGELOG.md
* cli: redesign output when cert installation failed
- Display a message when certificate installation begins.
- Don't use IReporter, just log errors immediately if restart/rollback
fails.
- Prompt the user with a command to retry the installation process once
they have fixed any underlying problems.
* vary by preconfigured_renewal
and move expiry date to be above the renewal advice
* update code comment
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* update code comment
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* fix lint
* derve cert name from cert_path, if possible
* fix type annotation
* text change in nginx hint
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* print message when restarting server after renewal
* log: print "advice" when exiting with an error
When running in non-quiet mode.
* try fix -oldest lock_test.py
* fix docstring
* s/Restarting/Reloading/ when notifying the user
* fix test name
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* type annotations
* s/using the {} plugin/installer: {}/
* copy: avoid "plugin" where possible
* link to user guide#automated-renewals
when not running with --preconfigured-renewal
* cli: reduce default logging verbosity
* fix lock_test: -vv is needed to see logger.debug
* Change comment in log.py to match the change to default verbosity
* Audit and adjust logging levels in apache module
* Audit and adjust logging levels in nginx module
* Audit, adjust logging levels, and improve logging calls in certbot module
* Fix tests to mock correct methods and classes
* typo in non-preconfigured-renewal message
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* fix test
* revert acme version bump
* catch up to python3 changes
* Revert "revert acme version bump"
This reverts commit fa83d6a51c.
* Change ocsp check error to warning since it's non-fatal
* Update storage_test in parallel with last change
* get rid of leading newline on "Deploying [...]"
* shrink renewal and installation success messages
* print logfile rather than logdir in exit handler
* Decrease logging level to info for idempotent operation where enhancement is already set
* Display cert not yet due for renewal message when renewing and no other action will be taken, and change cert to certificate
* also write to logger so it goes in the log file
* Don't double write to log file; fix main test
* cli: remove trailing newline on new cert reporting
* ignore type error
* revert accidental changes to dependencies
* Pass tests in any timezone by using utcfromtimestamp
* Add changelog entry
* fix nits
* Improve wording of try again message
* minor wording change to changelog
* hooks: send hook stdout to CLI stdout
includes both --manual and --{pre,post,renew} hooks
* update docstrings and remove TODO
* add a pending deprecation on execute_command
* add test coverage for both
* update deprecation text
Co-authored-by: ohemorange <ebportnoy@gmail.com>
Co-authored-by: Alex Zorin <alex@zorin.id.au>
Co-authored-by: alexzorin <alex@zor.io>
This is part of https://github.com/certbot/certbot/issues/8782. I took it on now because the currently pinned version of `pylint` doesn't work with newer versions of `poetry` which I wanted to upgrade as part of https://github.com/certbot/certbot/issues/8787.
To say a bit more about the specific changes in this PR:
* Newer versions of `pylint` complain if `Popen` isn't used as a context manager. Instead of making this change, I switched to using `subprocess.run` which is simpler and [recommended in the Python docs](https://docs.python.org/3/library/subprocess.html#using-the-subprocess-module). I also disabled this check in a few places where no longer using `Popen` would require significant refactoring.
* The deleted code in `certbot/certbot/_internal/renewal.py` is cruft since https://github.com/certbot/certbot/pull/8685.
* The unused argument to `enable_mod` in the Apache plugin is used in some over the override classes that subclass that class.
* unpin pylint and repin dependencies
* disable raise-missing-from
* disable wrong-input-order
* remove unused code
* misc lint fixes
* remove unused import
* various lint fixes
