Add a system test that checks whether IP addresses are present in a
dnstap capture of resolver traffic if "query-source" is explicitly set.
(cherry picked from commit 1f5c2ea8e5)
Have system tests use required Python (dnspython) and PERL modules
(Digest::HMAC and Net::DNS) from user directories, avoid using
privileges.
Note: The pythonenv must be setup to use the same version of python as
the test uses, for example /usr/bin/python.
Thanks to Stacey Marshall.
(cherry picked from commit 53eb127be1)
pylint 2.14.2 reports the following warnings:
bin/tests/system/checkds/tests-checkds.py:265:0: W1404: Implicit string concatenation found in call (implicit-str-concat)
bin/tests/system/checkds/tests-checkds.py:273:0: W1404: Implicit string concatenation found in call (implicit-str-concat)
(cherry picked from commit 831ac8add1)
If skip/xfail is used in pytest, it can have a reason string associated
with it. When evaluating these tests, it can be useful to be able to
differentiate the reason why the test was skipped/xfailed/xpassed,
because there might be multiple possible reasons for that.
The extra options passed to pytest ensure that the string with the
reason appears in the test summary and thus we're able to find the
string with the reason in the log output.
See https://docs.pytest.org/en/7.1.x/how-to/skipping.html for more info
(cherry picked from commit f6d368167a)
This commit removes dead code from cleanup handling part of the
get_create_tls_context().
In particular, currently:
* there is no way 'found_ctx' might equal 'ctx';
* there is no way 'session_cache' might equal a non-NULL value while
cleaning up after a TLS initialisation error.
(cherry picked from commit 095b608412)
This commit ensures that isc_nm_cancelread() is not called from within
dig code for HTTP sockets, as these lack its implementation.
It does not have much sense to have it due to transactional nature of
HTTP.
Every HTTP request-response pair is represented by a virtual socket,
where read callback is called only when full DNS message is received
or when an error code is being passed there. That is, there is nothing
to cancel at the time of the call.
(cherry picked from commit 90c52ca12b)
This commit extends DoT code with TLS client session resumption
support implemented on top of the TLS client session cache.
(cherry picked from commit 86465c1dac)
This commit extends TLS stream code and DoH code with TLS client
session resumption support implemented on top of the TLS client
session cache.
(cherry picked from commit 90bc13a5d5)
This commit extends TLS context cache with TLS client session cache so
that an associated session cache can be stored alongside the TLS
context within the context cache.
(cherry picked from commit 987892d113)
In special NS search mode, after the initial lookup, dig starts the
followup lookup with discovered NS servers in the queries list. If one
of those queries then fail, dig, as usual, tries to start the next query
in the list, which results in a crash, because the NS search mode is
special in a way that the queries are running in parallel, so the next
query is usually already started.
Apply some special logic in `recv_done()` function to deal with the
described situation when handling the query result for the NS search
mode. Particularly, print a warning message for the failed query,
and do not try to start the next query in the list. Also, set a non-zero
exit code if all the queries in the followup lookup fail.
(cherry picked from commit 1290863c22)
The statistics system test fails on Oracle Linux 7 when libxml2, Curl,
and xsltproc are present:
I:statistics:checking bind9.xsl vs xml (17)
diff: curl.out.17.xsl: No such file or directory
tests.sh: line 183: curl.out.17.xml: No such file or directory
cp: cannot stat 'curl.out.17.xml': No such file or directory
grep: xsltproc.out.17: No such file or directory
This is because the Oracle Linux 7 Curl does not know about the
--http1.1 option and silently fails with:
+ /usr/bin/curl --http1.1 http://10.53.0.3:7252
curl: option --http1.1: is unknown
curl: try 'curl --help' or 'curl --manual' for more information
The following test "checking bind9.xml socket statistics" then needs to
check for existence of stats.xml.out file which is artifact of the
previous test.
(cherry picked from commit 49cb896929)
Add a new test to check that a catalog zone member zone does not
get processed when there is a pre-existing forward zone with that
same name.
(cherry picked from commit b27969ee0b)
There is no reason for these two messages to be `ISC_LOG_INFO` while all
the other similar messages in `catz_addmodzone_taskaction()` and
`catz_delzone_taskaction()` functions are logged as `ISC_LOG_WARNING`.
(cherry picked from commit 8156c46bd2)
When processing a catalog zone member zone make sure that there is no
configured pre-existing forward zone with that name.
Refactor the `dns_fwdtable_find()` function to not alter the
`DNS_R_PARTIALMATCH` result (coming from `dns_rbt_findname()`) into
`DNS_R_SUCCESS`, so that now the caller can differentiate partial
and exact matches. Patch the calling sites to expect and process
the new return value.
(cherry picked from commit 2aff264fb1)
In the cases where we test SOA serial updates and TTL updates, we check
if for "all zones loaded" to ensure the new zone content is loaded. But
this is the unsigned zone, the signed zone still needs to be produced.
There is thus a timing issue where the dig request comes in before
the signing process has finished.
Add a retry quiet to mitigate against it.
(cherry picked from commit 827bba05a0)
The perl modifation code for keyless.example was not deterministic
(/NXT/ matched part of signature) resulting in different error
strings being returned. Replaced /NXT/ with /A RRSIG NSEC/ and
updated expected error string,
(cherry picked from commit 69d5e22e58)
The key lifetime should not be shorter than the time it costs to
introduce the successor key, otherwise keys will be created faster than
they are removed, resulting in a large key set.
The time it takes to replace a key is determined by the publication
interval (Ipub) of the successor key and the retire interval of the
predecessor key (Iret).
For the ZSK, Ipub is the sum of the DNSKEY TTL and zone propagation
delay (and publish safety). Iret is the sum of Dsgn, the maximum zone
TTL and zone propagation delay (and retire safety). The sign delay is
the signature validity period minus the refresh interval: The time to
ensure that all existing RRsets have been re-signed with the new key.
The ZSK lifetime should be larger than both values.
For the KSK, Ipub is the sum of the DNSKEY TTL and zone propagation
delay (and publish safety). Iret is the sum of the DS TTL and parent
zone propagation delay (and retire safety). The KSK lifetime should be
larger than both values.
(cherry picked from commit 8134d46cdb)
The signatures-refresh should not near the signatures-validity value,
to prevent operational instability. Same is true when checking against
signatures-validity-dnskey.
(cherry picked from commit 82fd89107f)
Give a little bit more time if we wait on a time out from the
authoritative (aka resolver failure), and give up after one try
(because the second attempt will likely result in a different EDE).
(cherry picked from commit f764cee136)
When there is no time in a key file, `dnssec-settime` will print
"UNSET", but to unset a time the user must specify "none" or "never".
This change allows "unset" or "UNSET" as well as "none" or "never".
The "UNSET" output remains the same to avoid compatibility problems
with wrapper scripts.
I have also re-synchronized the "Timing Options" sections of the man
pages.
(cherry picked from commit 4c96efac5c)
The dnssec-settime -p and -up options print times in asctime() and
UNIX time_t formats, respectively. The asctime() format can also be
found inside K*.key public key files. Key files also contain times in
the YYYYMMDDHHMMSS format that can be used in timing parameter
options.
The dnssec-settime -p and -up time formats are now acceptable in
timing parameter options to dnssec-settime and dnssec-keygen, so it is
no longer necessary to parse key files to retrieve times that are
acceptable in timing parameter options.
(cherry picked from commit c38a323082)
7249bad7 introduced the -c option to stat(1) command, but BSD systems
do not know about it. Replace the stat(1) command with a PERL script
that achieves the same.
Why PERL? For consistency purposes, there are more places in the
system test where we use the same method.
(cherry picked from commit fe601c5915)
Add a test case that triggers a keymgr run that will not trigger any
metadata changes. Ensure that the last status change of the key files
is unmodified.
(cherry picked from commit 7249bad706)
Check that the recursing client count is above a reasonable
minimum, as well as below a maximum, so that we can detect
bugs that cause recursion to fail too early or too often.
(cherry picked from commit 8834c44683)
The fetchlimit test depends on a resolver continuing to try UDP
and timing out while the client waits for resolution to succeed.
but since commit bb990030 (flag day 2020), a fetch will always
switch to TCP after two timeouts, unless EDNS was disabled for
the query.
This commit adds "edns no;" to server statements in the fetchlimit
resolver, to restore the behavior expected by the test.
(cherry picked from commit 81deb24deb)
RPZ NSIP and NSDNAME checks were failing with "unrecognized NS
rpz_rrset_find() failed: glue" when static or static-stub zones
where used to resolve the query name.
Add tests using stub and static-stub zones that are expected to
be filtered and not-filtered against NSIP and NSDNAME rules.
stub and static-stub queries are expected to be filtered
stub-nomatch and static-stub-nomatch queries are expected to be passed
(cherry picked from commit 30cb70c826)
The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
The dig commands appear to be failing unexpectedly on some platforms
when rate limiting kicks in and the response is dropped. Correct
behaviour should be for dig to retry the query. Set +qr and capture
stdout and stderr of each of the dig commands involved.
(cherry picked from commit 614cf5a030)
3034 next = ISC_LIST_NEXT(query, link);
3035 } else {
3036 next = NULL;
3037 }
CID 352554 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking connectquery suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
3038 if (connectquery != NULL) {
3039 query_detach(&connectquery);
3040 }
(cherry picked from commit 30f3d51368)
In '_check_apex_dnskey' we check for each key (KEY1 to KEY4) if they
are present in the DNSKEY RRset if they should be.
However, we only grep the dig output for the first seven fields (owner,
ttl, class, type, flags, protocol, algorithm). This can be the same
for different keys.
For example, KEY1 may be KSK predecessor and KEY2 a KSK successor,
both DNSKEY records for these keys are the same up to the public key
field. This can cause test failures if KEY1 needs to be present, but
KEY2 not, because when grepping for KEY2 we will falsely detect the
key to be present (because the grep matches KEY1).
Fix the function by grepping looking for the first seven fields in the
corresponding key file and retrieve the public key part. Grep for this
in the dig output.
(cherry picked from commit 3e1d09ac66)
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
(cherry picked from commit cf722d18b3)
- var_decl: Declaring variable "tbuf" without initializer
- assign: Assigning: "target.base" = "tbuf", which points to
uninitialized data
- assign: Assigning: "r.base" = "target.base", which points to
uninitialized data
I expect it would correctly initialize length always. Add simple
initialization to silent coverity.
(cherry picked from commit 59132bd3ec)
Parser ensures new-zones-directory has qstring parameter before it can
reach this place. dir == NULL then should never happen on any
configuration. Replace silent check with insist.
(cherry picked from commit 0a7d04367a)
The DNS catalog zones draft version 5 document requires that catalog
zones consumers must reset the member zone's internal zone state when
its unique label changes (either within the same catalog zone or
during change of ownership performed using the "coo" property).
BIND already behaves like that, and, in fact, doesn't support keeping
the zone state during change of ownership even if the unique label
has been kept the same, because BIND always removes the member zone
and adds it back during unique label renaming or change of ownership.
Document the described behavior and add a log message to inform when
unique label renaming occurs.
Add a system test case with unique label renaming.
(cherry picked from commit 2f2e02ff0c)
