The 'remote-servers' named.conf reference conflicts with the standard
term from the glossary. Rename the standard term to server-list to
make the docs build.
(cherry picked from commit 726c9cd73b)
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
(cherry picked from commit 1b2eadb197)
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
(cherry picked from commit b121f02eac)
Fix the loop terminating condition to get consistent sample sizes and increase the minimum number of samples from 20 to 40.
Closes#5091
Backport of MR !9894
Merge branch 'backport-5091-investigate-checking-startup-notify-rate-limit-failure-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9909
The terminating conditions for the startup notify test would
occasionally get ~20 records or get +10 seconds of records due to
a bad terminating condition. Additionally 20 samples lead to test
failures. Fix the terminating condition to use the correct conditional
(-eq -> -ge) and increase the minimum number of log entries to
average over to 40.
(cherry picked from commit 46388d07a2)
Closes#5088
Backport of MR !9884
Merge branch 'backport-5088-tests-irs-resconf_test-c-is-missing-check-callbacks-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9907
gcovr has issues with processing files produced as part of a BIND 9
build with tracing support enabled (--enable-tracing). Depending on the
gcovr version used, these issues may result in either warnings or
failures being reported by that tool. Disable tracing support for
gcovr-enabled builds to work around these issues.
(cherry picked from commit 7048b3ab0d)
Include the recent changes such as:
- changes to running system tests
- gitlab development workflow
- changelog and release note process
Closes#5045
Backport of MR !9784
Merge branch 'backport-5045-update-contributing-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9902
Include the recent changes such as:
- changes to running system tests
- gitlab development workflow
- changelog and release note process
(cherry picked from commit 39485c1f70)
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
Closes#5075
Backport of MR !9829
Merge branch 'backport-5075-database-rndc-reload-ensure-all-zones-loaded-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9900
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
(cherry picked from commit 0bdd03db66)
The style guide now mentions clang-format, doesn't parenthesize return values, and no longer calls for backward compatibility in public function names.
Backport of MR !9892
Merge branch 'backport-each-style-update-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9896
It now mentions clang-format, doesn't parenthesize return values,
and no longer calls for backward compatibility in public function names.
(cherry picked from commit 9f7314eaa4)
This allows easier identification of which burst is which in
named.run.
Backport of MR !9881
Merge branch 'backport-marka-use-different-burst-name-for-forensics-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9882
`shutdown_trigger_close_cb` is not called in the main loop since
queued events in the `loop->async_trigger`, including loop teardown
(shutdown_server) are processed first, before the `uv_close` callback
is executed..
In order to pass the information to the queued events, it is necessary
to set the flag earlier in the process and not wait for the `uv_close`
callback to trigger.
(cherry picked from commit 67e21d94d4)
Add a none parameter to named configuration option `query-source`
(respectively `query-source-v6`) which forbid usage of IPv4
(respectively IPv6) addresses when named is doing an upstream query.
Closes#4981 Turning-off upstream IPv6 queries while still listening
to downstream queries on IPv6.
Merge branch 'colin/querysource-none' into 'main'
See merge request isc-projects/bind9!9727
Backport of MR: !9727
Merge branch 'backport-querysource-none-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9775
Add a none parameter to named configuration option `query-source` (respectively `query-source-v6`) which forbid usage of IPv4 (respectively IPv6) addresses when named is doing an upstream query.
Closes#4981 Turning-off upstream IPv6 queries while still listening to downstream queries on IPv6.
Merge branch 'colin/querysource-none' into 'main'
See merge request isc-projects/bind9!9727
Backport of MR !9727
Some changes had to be done to the existing 9.20.x code in order to
make this backport compatible:
- first, the 9.20.x branches support the `port` parameter in
query-source[-v6], where 9.21.x does not. The original changes
depend on things that can't be backported because that would break
`port` support.
- second, the changes remove the optional `address` parameter from the
canonical form. So `query-source address <ip>` is now printed as
`query-source <ip>`. This means that `named-checkconf -p` will now
generate different output if users have `query-source address <ip>` or
`query-source address <ip> port <port>`; it will now generate
`query-source <ip>` or `query-source <ip> port <port>`. This is a
non-breaking change, because the parser has been updated to support
this form as well.
The December releases suffer from the ns2/managed1.conf file not being
in the mkeys extra_artifacts. This manifests only when pytest is run
with the --setup-only option, which is the case in the
cross-version-config-tests CI job. The original issue is fixed in !9815,
but the fix will be effective only when subsequent releases are out.
(cherry picked from commit 97a9d7287c)
If the RETERR define is only used once in a file, just drop the macro.
Backport of MR !9871
Merge branch 'backport-matthijs-remove-single-use-define-reterr-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9885
This subtest exercises static stub behaviour when server-addresses has an address. This was misidentified in the description.
Closes!9799
Backport of MR !9799
Merge branch 'backport-marka-fix-stub-subtest-description-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9879
The line after an unknown directive in resolv.conf could accidentally be skipped, potentially affecting dig, host, nslookup, nsupdate, or delv. This has been fixed.
Closes#5084
Backport of MR !9865
Merge branch 'backport-5084-plain-unknown-keyword-in-resolv-conf-not-handled-propely-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9877
Update to the new unit test framework.
Add a test for an unknown directive without any arguments.
Add test for an unknown directive without arguments, followed
by a search directive.
(cherry picked from commit c44c4fcbfb)
Only call eatline() to skip to the next line if we're not
already at the end of a line when parsing an unknown directive.
We were accidentally skipping the next line when there was only
a single unknown directive on the current line.
(cherry picked from commit eb78ad2080)
Prereq: isc-projects/images!345
Backport of MR !9612
Merge branch 'backport-mnowak/fedora-41-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9875
Prereq: isc-projects/images!359
Backport of MR !9872
Merge branch 'backport-mnowak/alpine-3.21-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9873
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
```
$ openssl dhparam -out <file> 3072
```
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the [changelog](https://openssl-library.org/news/openssl-3.1-notes/).
Closes#5074.
Backport of MR !9807
Merge branch 'backport-5074-fips-compatible-dhparams-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9868
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
(cherry picked from commit 384c92880e)
Commit af7db89513 as part of #4141 was supposed to apply the 'max-recursion-queries' quota to validator queries, but the counter was never actually passed on to 'dns_resolver_createfetch()'. This has been fixed, and the global query counter ('max-query-count', per client request) is now also added.
Related to #4980
Backport of MR !9856
Merge branch 'backport-4980-pass-counters-in-validator-createfetch-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9866
Commit af7db89513 as part of #4141 was
supposed to apply the 'max-recursion-queries' quota to validator
queries, but the counter was never actually passed on to
dns_resolver_createfetch(). This has been fixed, and the global query
counter ('max-query-count', per client request) is now also added.
(cherry picked from commit 5b1ae4a948)
Upstream code doesn't do regular releases, so we need to regularly
sync the code from the upstream repository. This is synchronization up
to the commit f8d0513 from Jan 29, 2024.
(cherry picked from commit d14a76e115)
Closes#5082
Backport of MR !9859
Merge branch 'backport-5082-lock-and-attach-when-return-zone-stats-revert-9.20' into 'bind-9.20'
See merge request isc-projects/bind9!9860
