* Remove diff-oss-ci
* Eliminate another inconsistency
* Fix logic: we want to only apply the fork check on the CE repo. On ent we want to always run the job.
---------
Co-authored-by: hc-github-team-secure-vault-core <github-team-secure-vault-core@hashicorp.com>
* adding testonly CI test job
* small instance for testonly tests
* feedback
* shopt
* disable glob expansion
* revert back to a large instance
* fix a mistake
We further optimize the CI workflow for better costs and speed.
We tested the Go CI workflows across several instance classes
and update our compute choices. We achieve an average execution
speed improvement of 2-2.5 minutes per test workflow while
reducing the infrastructure cost by about 20%. We also also save
another ~2 minutes by installing `gotestsum` from the Github release
instead of downloading the Go modules and compiling it every time.
In addition to the speed improvements, we also further reduced our cache
usage by updating the `security-scan` workflow to not cache Go modules.
We also use the `cache/save` and `cache/restore` actions for timing
caches. This results is saving half as many cache results for timing
data.
*UI test results*
results for 2x runs:
* c6a.2xlarge (12m54s, 11m55s)
* c6a.4xlarge (10m47s, 11m6s)
* c6a.8xlarge (11m32s, 10m51s)
* m5.2xlarge (15m23s, 14m16s)
* m5.4xlarge (14m48s, 12m54s)
* m5.8xlarge (12m27s, 12m24s)
* m6a.2xlarge (11m55s, 12m20s)
* m6a.4xlarge (10m54s, 10m43s)
* m6a.8xlarge (10m33s, 10m51s)
Current runner:
m5.2xlarge (15m23s, 14m16s, avg 14m50s) @ 0.448/hr = $0.11
Faster candidates
* c6a.2xlarge (12m54s, 11m55s, avg 12m24s) @ 0.3816/hr = $0.078
* m6a.2xlarge (11m55s, 12m20s, avg 12m8s) @ 0.4032/hr = $0.081
* c6a.4xlarge (10m47s, 11m6s, avg 10m56s) @ 0.7632/hr = $0.139
* m6a.4xlarge (10m54s, 10m43s, avg 10m48s) @ 0.8064/hr = $0.140
Best bang for the buck for test-ui:
m6a.2xlarge, > 25% cost savings from current and we save ~2.5 minutes.
*Go test results*
During testing the external replication tests, when not broken up, will
always take the longest. Our original analysis focuses on this job.
Most other tests groups will finish ~3m faster so we'll use subtract
that time when estimating the cost for the whole job.
external replication job results:
* c6a.2xlarge (20m49s, 19m20s, avg 20m5s)
* c6a.4xlarge (19m1s, 19m38s, avg 19m20s)
* c6a.8xlarge (19m51s, 18m54s, avg 19m23s)
* m5.2xlarge (22m12s, 20m29s, avg 21m20s)
* m5.4xlarge (20m7s, 19m3s, avg 20m35s)
* m5.8xlarge (20m24s, 19m42s, avg 20m3s)
* m6a.2xlarge (21m10s, 19m37s, avg 20m23s)
* m6a.4xlarge (18m58s, 19m51s, avg 19m24s)
* m6a.8xlarge (19m27s, 18m47s, avg 19m7s)
There is little separation in time when we increase class size. In the
best case a class size increase yields about a ~5% performance increase
and doubles the cost. For test-go our best bang for the buck is
certainly going to be in the 2xlarge class.
Current runner:
m5.2xlarge (22m12s, 20m29s, avg 21m20s) @ 0.448/hr (16@avg-3m + 1@avg) = $2.35
Candidates in the same class
* c6a.2xlarge (20m49s, 19m20s, avg 20m5s) @ 0.3816/hr (16@avg-3m + 1@avg) = $1.86
* m6a.2xlarge (21m10s, 19m37s, avg 20m23s) @ 0.4032/hr (16@avg-3m + 1@avg) = $2.00
Best bang for the buck for test-go:
c6a.2xlarge: 20% cost savings and save about ~2.25 minutes.
We ran the tests with similar instances and saw similar execution times as
with test-go. Therefore we can use the same recommended instance sizes.
After breaking up test-go's external replication tests, the longest group
was shorter on average. I choose to look at group 3 as it was usually the
longest grouping:
* c6a.2xlarge: (14m51s, 14m48s)
* c6a.4xlarge: (14m14s, 14m15)
* c6a.8xlarge: (14m0s, 13m54s)
* m5.2xlarge: (15m36s, 15m35s)
* m5.4xlarge: (14m46s, 14m49s)
* m5.8xlarge: (14m25s, 14m25s)
* m6a.2xlarge: 14m51s, 14m53s)
* m6a.4xlarge: 14m16s, 14m16s)
* m6a.8xlarge: (14m2s, 13m57s)
Again, we see ~5% performance gains between the 2x and 8x instance classes
at quadruple the cost. The c6a and m6a families are almost identical, with
the c6a class being cheaper.
*Notes*
* UI and Go Test timing results: https://github.com/hashicorp/vault-enterprise/actions/runs/5556957460/jobs/10150759959
* Go Test with data race detection timing results: https://github.com/hashicorp/vault-enterprise/actions/runs/5558013192
* Go Test with replication broken up: https://github.com/hashicorp/vault-enterprise/actions/runs/5558490899
Signed-off-by: Ryan Cragun <me@ryan.ec>
* limit test comments
* remove unecessary tee
* fix go test condition
* fix
* fail test
* remove ailways entirely
* fix columns
* make a bunch of tests fail
* separate line
* include Failures:
* remove test fails
* fix whitespace
* fix multiline
* shellcheck, and success message for builds
* add full path
* cat the summary
* fix and faster
* fix if condition
* base64 in a separate step
* echo
* check against empty string
* add echo
* only use matrix ids
* only id
* echo matrix
* remove wrapping array
* tojson
* try echo again
* use jq to get packages
* don't quote
* only run binary tests once
* only run binary tests once
* test what's wrong with the binary
* separate file
* use matrix file
* failed test
* update comment on success
* correct variable name
* bae64 fix
* output to file
* use multiline
* fix
* fix formatting
* fix newline
* fix whitespace
* correct body, remove comma
* small fixes
* shellcheck
* another shellcheck fix
* fix deprecation checker
* only run comments for prs
* Update .github/workflows/test-go.yml
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* Update .github/workflows/test-go.yml
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* fixes
---------
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* Make sure that we always download all of the required modules.
* Fix actions/set-up-go path for UI test
* Fix broken go.mod in hcp_link
Signed-off-by: Ryan Cragun <me@ryan.ec>
In order to reliably store Go test times in the Github Actions cache we
need to reduce our cache thrashing by not using more than 10gb over all
of our caches. This change reduces our cache usage significantly by
sharing Go module cache between our Go CI workflows and our build
workflows. We lose our per-builder cache which will result in a bit of
performance hit, but we'll enable better automatic rebalancing of our CI
workflows. Overall we should see a per branch reduction in cache sizes
from ~17gb to ~850mb.
Some preliminary investigation into this new strategy:
Prior build workflow strategy on a cache miss:
Download modules: ~20s
Build Vault: ~40s
Upload cache: ~30s
Total: ~1m30s
Prior build workflow strategy on a cache hit:
Download and decompress modules and build cache: ~12s
Build Vault: ~15s
Total: ~28s
New build workflow strategy on a cache miss:
Download modules: ~20
Build Vault: ~40s
Upload cache: ~6s
Total: ~1m6s
New build workflow strategy on a cache hit:
Download and decompress modules: ~3s
Build Vault: ~40s
Total: ~43s
Expected time if we used no Go caching:
Download modules: ~20
Build Vault: ~40s
Total: ~1m
Signed-off-by: Ryan Cragun <me@ryan.ec>
* use verify changes for docs to skip tests
* add verify-changes to the needed jobs
* skip go tests for doc/ui only changes
* fix a job ref
* change names, remove script
* remove ui conditions
* separate flags
* feedback
* combine into one checker
* combine and simplify ci checks
* add to test package list
* remove testing test
* only run deprecations check
* only run deprecations check
* remove unneeded repo check
* fix bash options
Improve our build workflow execution time by using custom runners,
improved caching and conditional Web UI builds.
Runners
-------
We improve our build times[0] by using larger custom runners[1] when
building the UI and Vault.
Caching
-------
We improve Vault caching by keeping a cache for each build job. This
strategy has the following properties which should result in faster
build times when `go.sum` hasn't been changed from prior builds, or
when a pull request is retried or updated after a prior successful
build:
* Builds will restore cached Go modules and Go build cache according to
the Go version, platform, architecture, go tags, and hash of `go.sum`
that relates to each individual build workflow. This reduces the
amount of time it will take to download the cache on hits and upload
the cache on misses.
* Parallel build workflows won't clobber each others build cache. This
results in much faster compile times after cache hits because the Go
compiler can reuse the platform, architecture, and tag specific build
cache that it created on prior runs.
* Older modules and build cache will not be uploaded when creating a new
cache. This should result in lean cache sizes on an ongoing basis.
* On cache misses we will have to upload our compressed module and build
cache. This will slightly extend the build time for pull requests that
modify `go.sum`.
Web UI
------
We no longer build the web UI in every build workflow. Instead we separate
the UI building into its own workflow and cache the resulting assets.
The same UI assets are restored from cache during build worklows. This
strategy has the following properties:
* If the `ui` directory has not changed from prior builds we'll restore
`http/web_ui` from cache and skip building the UI for no reason.
* We continue to use the built-in `yarn` caching functionality in
`action/setup-node`. The default mode saves the `yarn` global cache.
to improve UI build times if the cache has not been modified.
Changes
-------
* Add per platform/archicture Go module and build caching
* Move UI building into a separate job and cache the result
* Restore UI cache during build
* Pin workflows
Notes
-----
[0] https://hashicorp.atlassian.net/browse/QT-578
[1] https://github.com/hashicorp/vault/actions/runs/5415830307/jobs/9844829929
Signed-off-by: Ryan Cragun <me@ryan.ec>
* updates github workflows to read node version from .nvmrc file
* updates to double quotes for shell expression
* removes set-output workflow command
* updates to use node-version-file option for gh workflows
* pins node version to 16
* cleans up dependencies with critical warnigns
* adds changelog entry
* updates dockerfiles and ci github workflow to use node 16
* removes ui gh workflow not being used
* Update tests-completed job in CI to appear as success when one of the required checks is skipped (but not cancelled)
* Fix typo in tests-completed
---------
Co-authored-by: Marc Boudreau <marc.boudreau@hashicorp.com>
* Add a new category of runners to the CI workflow; use new, dedicated runners on OSS; adjust runner sizes for jobs
Co-authored-by: Marc Boudreau <marc.boudreau@hashicorp.com>
