unbound/doc/unbound-control.8.in

.\" Man page generated from reStructuredText.
.
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "UNBOUND-CONTROL" "8" "@date@" "@version@" "Unbound"
.SH NAME
unbound-control \- Unbound @version@ remote server control utility.
.SH SYNOPSIS
.sp
\fBunbound\-control\fP [\fB\-hq\fP] [\fB\-c cfgfile\fP] [\fB\-s server\fP] command
.SH DESCRIPTION
.sp
\fBunbound\-control\fP performs remote administration on the
\fI\%unbound(8)\fP DNS server.
It reads the configuration file, contacts the Unbound server over TLS sends the
command and displays the result.
.sp
The available options are:
.INDENT 0.0
.TP
.B \-h
Show the version and commandline option help.
.UNINDENT
.INDENT 0.0
.TP
.B \-c <cfgfile>
The config file to read with settings.
If not given the default config file
\fB@ub_conf_file@\fP is used.
.UNINDENT
.INDENT 0.0
.TP
.B \-s <server[@port]>
IPv4 or IPv6 address of the server to contact.
If not given, the address is read from the config file.
.UNINDENT
.INDENT 0.0
.TP
.B \-q
Quiet, if the option is given it does not print anything if it works ok.
.UNINDENT
.SH COMMANDS
.sp
There are several commands that the server understands.
.INDENT 0.0
.TP
.B start 
Start the server.
Simply execs \fI\%unbound(8)\fP\&.
The \fBunbound\fP executable is searched for in the \fBPATH\fP set in the
environment.
It is started with the config file specified using \fI\%\-c\fP or the
default config file.
.UNINDENT
.INDENT 0.0
.TP
.B stop 
Stop the server.
The server daemon exits.
.UNINDENT
.INDENT 0.0
.TP
.B reload 
Reload the server.
This flushes the cache and reads the config file fresh.
.UNINDENT
.INDENT 0.0
.TP
.B reload_keep_cache 
Reload the server but try to keep the RRset and message cache if
(re)configuration allows for it.
That means the caches sizes and the number of threads must not change
between reloads.
.UNINDENT
.INDENT 0.0
.TP
.B fast_reload [\fB+dpv\fP] 
Reload the server, but keep downtime to a minimum, so that user queries
keep seeing service.
This needs the code compiled with threads.
The config is loaded in a thread, and prepared, then it briefly pauses the
existing server and updates config options.
The intent is that the pause does not impact the service of user queries.
The cache is kept.
Also user queries worked on are kept and continue, but with the new config
options.
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
This command is experimental at this time.
.UNINDENT
.UNINDENT
.sp
The amount of temporal memory needed during a fast_reload is twice the
amount needed for configuration.
This is because Unbound temporarily needs to store both current
configuration values and new ones while trying to fast_reload.
Zones loaded from disk (authority zones and RPZ zones) are included in such
memory needs.
.sp
Options that can be changed are for
\fI\%forwards\fP,
\fI\%stubs\fP,
\fI\%views\fP,
\fI\%authority zones\fP,
\fI\%RPZ zones\fP and
\fI\%local zones\fP\&.
.sp
Also
\fI\%access\-control\fP and similar options,
\fI\%interface\-action\fP and similar
options and
\fI\%tcp\-connection\-limit\fP\&.
It can reload some
\fI\%define\-tag\fP
changes, more on that below.
Further options include
\fI\%insecure\-lan\-zones\fP,
\fI\%domain\-insecure\fP,
\fI\%trust\-anchor\-file\fP,
\fI\%trust\-anchor\fP,
\fI\%trusted\-keys\-file\fP,
\fI\%auto\-trust\-anchor\-file\fP,
\fI\%edns\-client\-string\fP,
ipset,
\fI\%log\-identity\fP,
\fI\%infra\-cache\-numhosts\fP,
\fI\%msg\-cache\-size\fP,
\fI\%rrset\-cache\-size\fP,
\fI\%key\-cache\-size\fP,
\fI\%ratelimit\-size\fP,
\fI\%neg\-cache\-size\fP,
\fI\%num\-queries\-per\-thread\fP,
\fI\%jostle\-timeout\fP,
\fI\%use\-caps\-for\-id\fP,
\fI\%unwanted\-reply\-threshold\fP,
\fI\%tls\-use\-sni\fP,
\fI\%outgoing\-tcp\-mss\fP,
\fI\%ip\-dscp\fP,
\fI\%max\-reuse\-tcp\-queries\fP,
\fI\%tcp\-reuse\-timeout\fP,
\fI\%tcp\-auth\-query\-timeout\fP,
\fI\%delay\-close\fP\&.
.sp
It does not work with
\fI\%interface\fP and
\fI\%outgoing\-interface\fP changes,
also not with
\fI\%remote control\fP,
\fI\%outgoing\-port\-permit\fP,
\fI\%outgoing\-port\-avoid\fP,
\fI\%msg\-buffer\-size\fP,
any \fB*\-slabs\fP options and
\fI\%statistics\-interval\fP changes.
.sp
For \fI\%dnstap\fP these options can be changed:
\fI\%dnstap\-log\-resolver\-query\-messages\fP,
\fI\%dnstap\-log\-resolver\-response\-messages\fP,
\fI\%dnstap\-log\-client\-query\-messages\fP,
\fI\%dnstap\-log\-client\-response\-messages\fP,
\fI\%dnstap\-log\-forwarder\-query\-messages\fP and
\fI\%dnstap\-log\-forwarder\-response\-messages\fP\&.
.sp
It does not work with these options:
\fI\%dnstap\-enable\fP,
\fI\%dnstap\-bidirectional\fP,
\fI\%dnstap\-socket\-path\fP,
\fI\%dnstap\-ip\fP,
\fI\%dnstap\-tls\fP,
\fI\%dnstap\-tls\-server\-name\fP,
\fI\%dnstap\-tls\-cert\-bundle\fP,
\fI\%dnstap\-tls\-client\-key\-file\fP and
\fI\%dnstap\-tls\-client\-cert\-file\fP\&.
.sp
The options
\fI\%dnstap\-send\-identity\fP,
\fI\%dnstap\-send\-version\fP,
\fI\%dnstap\-identity\fP, and
\fI\%dnstap\-version\fP can be loaded
when \fB+p\fP is not used.
.sp
The \fB+v\fP option makes the output verbose which includes the time it took
to do the reload.
With \fB+vv\fP it is more verbose which includes the amount of memory that
was allocated temporarily to perform the reload; this amount of memory can
be big if the config has large contents.
In the timing output the \(aqreload\(aq time is the time during which the server
was paused.
.sp
The \fB+p\fP option makes the reload not pause threads, they keep running.
Locks are acquired, but items are updated in sequence, so it is possible
for threads to see an inconsistent state with some options from the old
and some options from the new config, such as cache TTL parameters from the
old config and forwards from the new config.
The stubs and forwards are updated at the same time, so that they are
viewed consistently, either old or new values together.
The option makes the reload time take eg. 3 microseconds instead of 0.3
milliseconds during which the worker threads are interrupted.
So, the interruption is much shorter, at the expense of some inconsistency.
After the reload itself, every worker thread is briefly contacted to make
them release resources, this makes the delete timing a little longer, and
takes up time from the remote control servicing worker thread.
.sp
With the nopause option (\fB+p\fP), the reload does not work to reload some
options, that fast reload works on without the nopause option:
\fI\%val\-bogus\-ttl\fP,
\fI\%val\-override\-date\fP,
\fI\%val\-sig\-skew\-min\fP,
\fI\%val\-sig\-skew\-max\fP,
\fI\%val\-max\-restart\fP,
\fI\%val\-nsec3\-keysize\-iterations\fP,
\fI\%target\-fetch\-policy\fP,
\fI\%outbound\-msg\-retry\fP,
\fI\%max\-sent\-count\fP,
\fI\%max\-query\-restarts\fP,
\fI\%do\-not\-query\-address\fP,
\fI\%do\-not\-query\-localhost\fP,
\fI\%private\-address\fP,
\fI\%private\-domain\fP,
\fI\%caps\-exempt\fP,
\fI\%nat64\-prefix\fP,
\fI\%do\-nat64\fP,
\fI\%infra\-host\-ttl\fP,
\fI\%infra\-keep\-probing\fP,
\fI\%ratelimit\fP,
\fI\%ip\-ratelimit\fP,
\fI\%ip\-ratelimit\-cookie\fP,
\fI\%wait\-limit\-netblock\fP,
\fI\%wait\-limit\-cookie\-netblock\fP,
\fI\%ratelimit\-below\-domain\fP,
\fI\%ratelimit\-for\-domain\fP\&.
.sp
The \fB+d\fP option makes the reload drop queries that the worker threads are
working on.
This is like
\fI\%flush_requestlist\fP\&.
Without it the queries are kept so that users keep getting answers for
those queries that are currently processed.
The drop makes it so that queries during the life time of the
query processing see only old, or only new config options.
.sp
When there are changes to the config tags, from the
\fI\%define\-tag\fP option,
then the \fB+d\fP option is implicitly turned on with a warning printout, and
queries are dropped.
This is to stop references to the old tag information, by the old
queries.
If the number of tags is increased in the newly loaded config, by
adding tags at the end, then the implicit \fB+d\fP option is not needed.
.sp
For response ip, that is actions associated with IP addresses, and perhaps
intersected with access control tag and action information, those settings
are stored with a query when it comes in based on its source IP address.
The old information is kept with the query until the queries are done.
This is gone when those queries are resolved and finished, or it is
possible to flush the requestlist with \fB+d\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B verbosity \fInumber\fP 
Change verbosity value for logging.
Same values as the \fBverbosity:\fP keyword in
\fI\%unbound.conf(5)\fP\&.
This new setting lasts until the server is issued a reload (taken from
config file again), or the next verbosity control command.
.UNINDENT
.INDENT 0.0
.TP
.B log_reopen 
Reopen the logfile, close and open it.
Useful for logrotation to make the daemon release the file it is logging
to.
If you are using syslog it will attempt to close and open the syslog (which
may not work if chrooted).
.UNINDENT
.INDENT 0.0
.TP
.B stats 
Print statistics.
Resets the internal counters to zero, this can be controlled using the
\fBstatistics\-cumulative:\fP config statement.
Statistics are printed with one \fB[name]: [value]\fP per line.
.UNINDENT
.INDENT 0.0
.TP
.B stats_noreset 
Peek at statistics.
Prints them like the stats command does, but does not reset the internal
counters to zero.
.UNINDENT
.INDENT 0.0
.TP
.B status 
Display server status.
Exit code 3 if not running (the connection to the port is refused), 1 on
error, 0 if running.
.UNINDENT
.INDENT 0.0
.TP
.B local_zone \fIname type\fP 
Add new local zone with name and type.
Like local\-zone config statement.
If the zone already exists, the type is changed to the given argument.
.UNINDENT
.INDENT 0.0
.TP
.B local_zone_remove \fIname\fP 
Remove the local zone with the given name.
Removes all local data inside it.
If the zone does not exist, the command succeeds.
.UNINDENT
.INDENT 0.0
.TP
.B local_data \fIRR data...\fP 
Add new local data, the given resource record.
Like \fBlocal\-data:\fP keyword, except for when no covering zone exists.
In that case this remote control command creates a transparent zone with
the same name as this record.
.UNINDENT
.INDENT 0.0
.TP
.B local_data_remove \fIname\fP 
Remove all RR data from local name.
If the name already has no items, nothing happens.
Often results in NXDOMAIN for the name (in a static zone), but if the name
has become an empty nonterminal (there is still data in domain names below
the removed name), NOERROR nodata answers are the result for that name.
.UNINDENT
.INDENT 0.0
.TP
.B local_zones 
Add local zones read from stdin of unbound\-control.
Input is read per line, with name space type on a line.
For bulk additions.
.UNINDENT
.INDENT 0.0
.TP
.B local_zones_remove 
Remove local zones read from stdin of unbound\-control.
Input is one name per line.
For bulk removals.
.UNINDENT
.INDENT 0.0
.TP
.B local_datas 
Add local data RRs read from stdin of unbound\-control.
Input is one RR per line.
For bulk additions.
.UNINDENT
.INDENT 0.0
.TP
.B local_datas_remove 
Remove local data RRs read from stdin of unbound\-control.
Input is one name per line.
For bulk removals.
.UNINDENT
.INDENT 0.0
.TP
.B dump_cache 
The contents of the cache is printed in a text format to stdout.
You can redirect it to a file to store the cache in a file.
Not supported in remote Unbounds in multi\-process operation.
.UNINDENT
.INDENT 0.0
.TP
.B load_cache 
The contents of the cache is loaded from stdin.
Uses the same format as dump_cache uses.
Loading the cache with old, or wrong data can result in old or wrong data
returned to clients.
Loading data into the cache in this way is supported in order to aid with
debugging.
Not supported in remote Unbounds in multi\-process operation.
.UNINDENT
.INDENT 0.0
.TP
.B cache_lookup [\fB+t\fP] \fInames\fP 
Print to stdout the RRsets and messages that are in the cache.
For every name listed the content at or under the name is printed.
Several names separated by spaces can be given, each is printed.
When subnetcache is enabled, also matching entries from the subnet
cache are printed.
.sp
The \fB+t\fP option allows tld and root names.
With it names like \(aqcom\(aq and \(aq.\(aq can be used, but it takes a lot of
effort to look up in the cache.
.UNINDENT
.INDENT 0.0
.TP
.B lookup \fIname\fP 
Print to stdout the name servers that would be used to look up the name
specified.
.UNINDENT
.INDENT 0.0
.TP
.B flush [\fB+c\fP] \fIname\fP 
Remove the name from the cache.
Removes the types A, AAAA, NS, SOA, CNAME, DNAME, MX, PTR, SRV, NAPTR,
SVCB and HTTPS.
Because that is fast to do.
Other record types can be removed using \fBflush_type\fP or \fBflush_zone\fP\&.
.sp
The \fB+c\fP option removes the items also from the cachedb cache.
If cachedb is in use.
.UNINDENT
.INDENT 0.0
.TP
.B flush_type [\fB+c\fP] \fIname type\fP 
Remove the name, type information from the cache.
.sp
The \fB+c\fP option removes the items also from the cachedb cache.
If cachedb is in use.
.UNINDENT
.INDENT 0.0
.TP
.B flush_zone [\fB+c\fP] name 
Remove all information at or below the name from the cache.
The rrsets and key entries are removed so that new lookups will be
performed.
This needs to walk and inspect the entire cache, and is a slow operation.
The entries are set to expired in the implementation of this command (so,
with serve\-expired enabled, it\(aqll serve that information but schedule a
prefetch for new information).
.sp
The \fB+c\fP option removes the items also from the cachedb cache.
If cachedb is in use.
.UNINDENT
.INDENT 0.0
.TP
.B flush_bogus [\fB+c\fP] 
Remove all bogus data from the cache.
.sp
The \fB+c\fP option removes the items also from the cachedb cache.
If cachedb is in use.
.UNINDENT
.INDENT 0.0
.TP
.B flush_negative [\fB+c\fP] 
Remove all negative data from the cache.
This is nxdomain answers, nodata answers and servfail answers.
Also removes bad key entries (which could be due to failed lookups) from
the dnssec key cache, and iterator last\-resort lookup failures from the
rrset cache.
.sp
The \fB+c\fP option removes the items also from the cachedb cache.
If cachedb is in use.
.UNINDENT
.INDENT 0.0
.TP
.B flush_stats 
Reset statistics to zero.
.UNINDENT
.INDENT 0.0
.TP
.B flush_requestlist 
Drop the queries that are worked on.
Stops working on the queries that the server is working on now.
The cache is unaffected.
No reply is sent for those queries, probably making those users request
again later.
Useful to make the server restart working on queries with new settings,
such as a higher verbosity level.
.UNINDENT
.INDENT 0.0
.TP
.B dump_requestlist 
Show what is worked on.
Prints all queries that the server is currently working on.
Prints the time that users have been waiting.
For internal requests, no time is printed.
And then prints out the module status.
This prints the queries from the first thread, and not queries that are
being serviced from other threads.
.UNINDENT
.INDENT 0.0
.TP
.B flush_infra \fIall|IP\fP 
If all then entire infra cache is emptied.
If a specific IP address, the entry for that address is removed from the
cache.
It contains EDNS, ping and lameness data.
.UNINDENT
.INDENT 0.0
.TP
.B dump_infra 
Show the contents of the infra cache.
.UNINDENT
.INDENT 0.0
.TP
.B set_option \fIopt: val\fP 
Set the option to the given value without a reload.
The cache is therefore not flushed.
The option must end with a \fB\(aq:\(aq\fP and whitespace must be between the
option and the value.
Some values may not have an effect if set this way, the new values are not
written to the config file, not all options are supported.
This is different from the set_option call in libunbound, where all values
work because Unbound has not been initialized.
.sp
The values that work are: statistics\-interval, statistics\-cumulative,
do\-not\-query\-localhost,  harden\-short\-bufsize, harden\-large\-queries,
harden\-glue, harden\-dnssec\-stripped, harden\-below\-nxdomain,
harden\-referral\-path,  prefetch, prefetch\-key, log\-queries, hide\-identity,
hide\-version, identity, version, val\-log\-level, val\-log\-squelch,
ignore\-cd\-flag, add\-holddown, del\-holddown, keep\-missing, tcp\-upstream,
ssl\-upstream, max\-udp\-size, ratelimit, ip\-ratelimit, cache\-max\-ttl,
cache\-min\-ttl, cache\-max\-negative\-ttl.
.UNINDENT
.INDENT 0.0
.TP
.B get_option \fIopt\fP 
Get the value of the option.
Give the option name without a trailing \fB\(aq:\(aq\fP\&.
The value is printed.
If the value is \fB\(dq\(dq\fP, nothing is printed and the connection closes.
On error \fB\(aqerror ...\(aq\fP is printed (it gives a syntax error on unknown
option).
For some options a list of values, one on each line, is printed.
The options are shown from the config file as modified with set_option.
For some options an override may have been taken that does not show up with
this command, not results from e.g. the verbosity and forward control
commands.
Not all options work, see list_stubs, list_forwards, list_local_zones and
list_local_data for those.
.UNINDENT
.INDENT 0.0
.TP
.B list_stubs 
List the stub zones in use.
These are printed one by one to the output.
This includes the root hints in use.
.UNINDENT
.INDENT 0.0
.TP
.B list_forwards 
List the forward zones in use.
These are printed zone by zone to the output.
.UNINDENT
.INDENT 0.0
.TP
.B list_insecure 
List the zones with domain\-insecure.
.UNINDENT
.INDENT 0.0
.TP
.B list_local_zones 
List the local zones in use.
These are printed one per line with zone type.
.UNINDENT
.INDENT 0.0
.TP
.B list_local_data 
List the local data RRs in use.
The resource records are printed.
.UNINDENT
.INDENT 0.0
.TP
.B insecure_add \fIzone\fP 
Add a domain\-insecure for the given zone, like the statement in
unbound.conf.
Adds to the running Unbound without affecting the cache
contents (which may still be bogus, use flush_zone to remove it), does not
affect the config file.
.UNINDENT
.INDENT 0.0
.TP
.B insecure_remove \fIzone\fP 
Removes domain\-insecure for the given zone.
.UNINDENT
.INDENT 0.0
.TP
.B forward_add [\fB+it\fP] \fIzone addr ...\fP 
Add a new forward zone to running Unbound.
With \fB+i\fP option also adds a domain\-insecure for the zone (so it can
resolve insecurely if you have a DNSSEC root trust anchor configured for
other names).
The addr can be IP4, IP6 or nameserver names, like forward\-zone config in
unbound.conf.
The \fB+t\fP option sets it to use TLS upstream, like
\fI\%forward\-tls\-upstream: yes\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B forward_remove [\fB+i\fP] \fIzone\fP 
Remove a forward zone from running Unbound.
The \fB+i\fP also removes a domain\-insecure for the zone.
.UNINDENT
.INDENT 0.0
.TP
.B stub_add [\fB+ipt\fP] \fIzone addr ...\fP 
Add a new stub zone to running Unbound.
With \fB+i\fP option also adds a domain\-insecure for the zone.
With \fB+p\fP the stub zone is set to prime, without it it is set to
notprime.
The addr can be IP4, IP6 or nameserver names, like the \fBstub\-zone:\fP
config in unbound.conf.
The \fB+t\fP option sets it to use TLS upstream, like
\fI\%stub\-tls\-upstream: yes\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B stub_remove [\fB+i\fP] \fIzone\fP 
Remove a stub zone from running Unbound.
The \fB+i\fP also removes a domain\-insecure for the zone.
.UNINDENT
.INDENT 0.0
.TP
.B forward [\fIoff\fP | \fIaddr ...\fP ] 
Setup forwarding mode.
Configures if the server should ask other upstream nameservers, should go
to the internet root nameservers itself, or show the current config.
You could pass the nameservers after a DHCP update.
.sp
Without arguments the current list of addresses used to forward all queries
to is printed.
On startup this is from the forward\-zone \fB\(dq.\(dq\fP configuration.
Afterwards it shows the status.
It prints off when no forwarding is used.
.sp
If off is passed, forwarding is disabled and the root nameservers are
used.
This can be used to avoid to avoid buggy or non\-DNSSEC supporting
nameservers returned from DHCP.
But may not work in hotels or hotspots.
.sp
If one or more IPv4 or IPv6 addresses are given, those are then used to
forward queries to.
The addresses must be separated with spaces.
With \fB\(aq@port\(aq\fP the port number can be set explicitly (default port is 53
(DNS)).
.sp
By default the forwarder information from the config file for the root
\fB\(dq.\(dq\fP is used.
The config file is not changed, so after a reload these changes are gone.
Other forward zones from the config file are not affected by this command.
.UNINDENT
.INDENT 0.0
.TP
.B ratelimit_list [\fB+a\fP] 
List the domains that are ratelimited.
Printed one per line with current estimated qps and qps limit from config.
With \fB+a\fP it prints all domains, not just the ratelimited domains, with
their estimated qps.
The ratelimited domains return an error for uncached (new) queries, but
cached queries work as normal.
.UNINDENT
.INDENT 0.0
.TP
.B ip_ratelimit_list [\fB+a\fP] 
List the ip addresses that are ratelimited.
Printed one per line with current estimated qps and qps limit from config.
With \fB+a\fP it prints all ips, not just the ratelimited ips, with their
estimated qps.
The ratelimited ips are dropped before checking the cache.
.UNINDENT
.INDENT 0.0
.TP
.B list_auth_zones 
List the auth zones that are configured.
Printed one per line with a status, indicating if the zone is expired and
current serial number.
Configured RPZ zones are included.
.UNINDENT
.INDENT 0.0
.TP
.B auth_zone_reload \fIzone\fP 
Reload the auth zone (or RPZ zone) from zonefile.
The zonefile is read in overwriting the current contents of the zone in
memory.
This changes the auth zone contents itself, not the cache contents.
Such cache contents exists if you set Unbound to validate with
\fBfor\-upstream: yes\fP and that can be cleared with \fBflush_zone\fP \fIzone\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B auth_zone_transfer \fIzone\fP 
Transfer the auth zone (or RPZ zone) from master.
The auth zone probe sequence is started, where the masters are probed to
see if they have an updated zone (with the SOA serial check).
And then the zone is transferred for a newer zone version.
.UNINDENT
.INDENT 0.0
.TP
.B rpz_enable \fIzone\fP 
Enable the RPZ zone if it had previously been disabled.
.UNINDENT
.INDENT 0.0
.TP
.B rpz_disable \fIzone\fP 
Disable the RPZ zone.
.UNINDENT
.INDENT 0.0
.TP
.B view_list_local_zones \fIview\fP 
\fIlist_local_zones\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_zone \fIview name type\fP 
\fIlocal_zone\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_zone_remove \fIview name\fP 
\fIlocal_zone_remove\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_list_local_data \fIview\fP 
\fIlist_local_data\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_data \fIview RR data...\fP 
\fIlocal_data\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_data_remove \fIview name\fP 
\fIlocal_data_remove\fP for given view.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_datas_remove \fIview\fP 
Remove a list of \fIlocal_data\fP for given view from stdin.
Like \fIlocal_datas_remove\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B view_local_datas \fIview\fP 
Add a list of \fIlocal_data\fP for given view from stdin.
Like \fIlocal_datas\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B add_cookie_secret \fIsecret\fP 
Add or replace a cookie secret persistently.
\fIsecret\fP needs to be an 128 bit hex string.
.sp
Cookie secrets can be either \fBactive\fP or \fBstaging\fP\&.
\fBActive\fP cookie secrets are used to create DNS Cookies, but verification
of a DNS Cookie succeeds with any of the \fBactive\fP or \fBstaging\fP cookie
secrets.
The state of the current cookie secrets can be printed with the
\fI\%print_cookie_secrets\fP
command.
.sp
When there are no cookie secrets configured yet, the \fIsecret\fP is added as
\fBactive\fP\&.
If there is already an \fBactive\fP cookie secret, the \fIsecret\fP is added as
\fBstaging\fP or replacing an existing \fBstaging\fP secret.
.sp
To \(dqroll\(dq a cookie secret used in an anycast set.
The new secret has to be added as \fBstaging\fP secret to \fBall\fP nodes in
the anycast set.
When \fBall\fP nodes can verify DNS Cookies with the new secret, the new
secret can be activated with the
\fI\%activate_cookie_secret\fP
command.
After \fBall\fP nodes have the new secret \fBactive\fP for at least one hour,
the previous secret can be dropped with the
\fI\%drop_cookie_secret\fP
command.
.sp
Persistence is accomplished by writing to a file which is configured with
the
\fI\%cookie\-secret\-file\fP
option in the server section of the config file.
This is disabled by default, \(dq\(dq.
.UNINDENT
.INDENT 0.0
.TP
.B drop_cookie_secret 
Drop the \fBstaging\fP cookie secret.
.UNINDENT
.INDENT 0.0
.TP
.B activate_cookie_secret 
Make the current \fBstaging\fP cookie secret \fBactive\fP, and the current
\fBactive\fP cookie secret \fBstaging\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B print_cookie_secrets 
Show the current configured cookie secrets with their status.
.UNINDENT
.SH EXIT CODE
.sp
The \fBunbound\-control\fP program exits with status code 1 on error, 0 on
success.
.SH SET UP
.sp
The setup requires a self\-signed certificate and private keys for both the
server and client.
The script \fBunbound\-control\-setup\fP generates these in the default run
directory, or with \fB\-d\fP in another directory.
If you change the access control permissions on the key files you can decide
who can use \fBunbound\-control\fP, by default owner and group but not all users.
Run the script under the same username as you have configured in
\fBunbound.conf\fP or as root, so that the daemon is permitted to read the
files, for example with:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
sudo \-u unbound unbound\-control\-setup
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
If you have not configured a username in \fBunbound.conf\fP, the keys need
read permission for the user credentials under which the daemon is started.
The script preserves private keys present in the directory.
After running the script as root, turn on
\fI\%control\-enable\fP in
\fBunbound.conf\fP\&.
.SH STATISTIC COUNTERS
.sp
The \fI\%stats\fP and
\fI\%stats_noreset\fP commands show a
number of statistic counters:
.INDENT 0.0
.TP
.B threadX.num.queries 
number of queries received by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_ip_ratelimited 
number of queries rate limited by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_cookie_valid 
number of queries with a valid DNS Cookie by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_cookie_client 
number of queries with a client part only DNS Cookie by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_cookie_invalid 
number of queries with an invalid DNS Cookie by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_discard_timeout 
number of queries removed due to discard\-timeout by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_wait_limit 
number of queries removed due to wait\-limit by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.cachehits 
number of queries that were successfully answered using a cache lookup
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.cachemiss 
number of queries that needed recursive processing
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.dnscrypt.crypted 
number of queries that were encrypted and successfully decapsulated by
dnscrypt.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.dnscrypt.cert 
number of queries that were requesting dnscrypt certificates.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.dnscrypt.cleartext 
number of queries received on dnscrypt port that were cleartext and not a
request for certificates.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.dnscrypt.malformed 
number of request that were neither cleartext, not valid dnscrypt messages.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.dns_error_reports 
number of DNS Error Reports generated by thread
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.prefetch 
number of cache prefetches performed.
This number is included in cachehits, as the original query had the
unprefetched answer from cache, and resulted in recursive processing,
taking a slot in the requestlist.
Not part of the recursivereplies (or the histogram thereof) or cachemiss,
as a cache response was sent.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.expired 
number of replies that served an expired cache entry.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.queries_timed_out 
number of queries that are dropped because they waited in the UDP socket
buffer for too long.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.query.queue_time_us.max 
The maximum wait time for packets in the socket buffer, in microseconds.
This is only reported when
\fI\%sock\-queue\-timeout\fP is enabled.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.num.recursivereplies 
The number of replies sent to queries that needed recursive processing.
Could be smaller than threadX.num.cachemiss if due to timeouts no replies
were sent for some queries.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.avg 
The average number of requests in the internal recursive processing request
list on insert of a new incoming recursive processing query.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.max 
Maximum size attained by the internal recursive processing request list.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.overwritten 
Number of requests in the request list that were overwritten by newer
entries.
This happens if there is a flood of queries that recursive processing and
the server has a hard time.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.exceeded 
Queries that were dropped because the request list was full.
This happens if a flood of queries need recursive processing, and the
server can not keep up.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.current.all 
Current size of the request list, includes internally generated queries
(such as priming queries and glue lookups).
.UNINDENT
.INDENT 0.0
.TP
.B threadX.requestlist.current.user 
Current size of the request list, only the requests from client queries.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.recursion.time.avg 
Average time it took to answer queries that needed recursive processing.
Note that queries that were answered from the cache are not in this average.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.recursion.time.median 
The median of the time it took to answer queries that needed recursive
processing.
The median means that 50% of the user queries were answered in less than
this time.
Because of big outliers (usually queries to non responsive servers), the
average can be bigger than the median.
This median has been calculated by interpolation from a histogram.
.UNINDENT
.INDENT 0.0
.TP
.B threadX.tcpusage 
The currently held tcp buffers for incoming connections.
A spot value on the time of the request.
This helps you spot if the incoming\-num\-tcp buffers are full.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_ip_ratelimited 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_cookie_valid 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_cookie_client 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_cookie_invalid 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_discard_timeout 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_wait_limit 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.cachehits 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.cachemiss 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.dnscrypt.crypted 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.dnscrypt.cert 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.dnscrypt.cleartext 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.dnscrypt.malformed 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.dns_error_reports 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.prefetch 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.expired 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.queries_timed_out 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.query.queue_time_us.max 
the maximum of the thread values.
.UNINDENT
.INDENT 0.0
.TP
.B total.num.recursivereplies 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.requestlist.avg 
averaged over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.requestlist.max 
the maximum of the thread requestlist.max values.
.UNINDENT
.INDENT 0.0
.TP
.B total.requestlist.overwritten 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.requestlist.exceeded 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.requestlist.current.all 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.recursion.time.median 
averaged over threads.
.UNINDENT
.INDENT 0.0
.TP
.B total.tcpusage 
summed over threads.
.UNINDENT
.INDENT 0.0
.TP
.B time.now 
current time in seconds since 1970.
.UNINDENT
.INDENT 0.0
.TP
.B time.up 
uptime since server boot in seconds.
.UNINDENT
.INDENT 0.0
.TP
.B time.elapsed 
time since last statistics printout, in seconds.
.UNINDENT
.SH EXTENDED STATISTICS
.INDENT 0.0
.TP
.B mem.cache.rrset 
Memory in bytes in use by the RRset cache.
.UNINDENT
.INDENT 0.0
.TP
.B mem.cache.message 
Memory in bytes in use by the message cache.
.UNINDENT
.INDENT 0.0
.TP
.B mem.cache.dnscrypt_shared_secret 
Memory in bytes in use by the dnscrypt shared secrets cache.
.UNINDENT
.INDENT 0.0
.TP
.B mem.cache.dnscrypt_nonce 
Memory in bytes in use by the dnscrypt nonce cache.
.UNINDENT
.INDENT 0.0
.TP
.B mem.mod.iterator 
Memory in bytes in use by the iterator module.
.UNINDENT
.INDENT 0.0
.TP
.B mem.mod.validator 
Memory in bytes in use by the validator module.
Includes the key cache and negative cache.
.UNINDENT
.INDENT 0.0
.TP
.B mem.streamwait 
Memory in bytes in used by the TCP and TLS stream wait buffers.
These are answers waiting to be written back to the clients.
.UNINDENT
.INDENT 0.0
.TP
.B mem.http.query_buffer 
Memory in bytes used by the HTTP/2 query buffers.
Containing (partial) DNS queries waiting for request stream completion.
.UNINDENT
.INDENT 0.0
.TP
.B mem.http.response_buffer 
Memory in bytes used by the HTTP/2 response buffers.
Containing DNS responses waiting to be written back to the clients.
.UNINDENT
.INDENT 0.0
.TP
.B mem.quic 
Memory in bytes used by QUIC.
Containing connection information, stream information, queries read and
responses written back to the clients.
.UNINDENT
.INDENT 0.0
.TP
.B histogram.<sec>.<usec>.to.<sec>.<usec> 
Shows a histogram, summed over all threads.
Every element counts the recursive queries whose reply time fit between the
lower and upper bound.
Times larger or equal to the lowerbound, and smaller than the upper bound.
There are 40 buckets, with bucket sizes doubling.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.type.A 
The total number of queries over all threads with query type A.
Printed for the other query types as well, but only for the types for which
queries were received, thus =0 entries are omitted for brevity.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.type.other 
Number of queries with query types 256\-65535.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.class.IN 
The total number of queries over all threads with query class IN
(internet).
Also printed for other classes (such as CH (CHAOS) sometimes used for
debugging), or NONE, ANY, used by dynamic update.
num.query.class.other is printed for classes 256\-65535.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.opcode.QUERY 
The total number of queries over all threads with query opcode QUERY.
Also printed for other opcodes, UPDATE, ...
.UNINDENT
.INDENT 0.0
.TP
.B num.query.tcp 
Number of queries that were made using TCP towards the Unbound server.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.tcpout 
Number of queries that the Unbound server made using TCP outgoing towards
other servers.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.udpout 
Number of queries that the Unbound server made using UDP outgoing towards
other servers.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.tls 
Number of queries that were made using TLS towards the Unbound server.
These are also counted in num.query.tcp, because TLS uses TCP.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.tls.resume 
Number of TLS session resumptions, these are queries over TLS towards the
Unbound server where the client negotiated a TLS session resumption key.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.https 
Number of queries that were made using HTTPS towards the Unbound server.
These are also counted in num.query.tcp and num.query.tls, because HTTPS
uses TLS and TCP.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.quic 
Number of queries that were made using QUIC towards the Unbound server.
These are also counted in num.query.tls, because TLS is used for these
queries.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.ipv6 
Number of queries that were made using IPv6 towards the Unbound server.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.flags.RD 
The number of queries that had the RD flag set in the header.
Also printed for flags QR, AA, TC, RA, Z, AD, CD.
Note that queries with flags QR, AA or TC may have been rejected because of
that.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.edns.present 
number of queries that had an EDNS OPT record present.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.edns.DO 
number of queries that had an EDNS OPT record with the DO (DNSSEC OK) bit
set.
These queries are also included in the num.query.edns.present number.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.ratelimited 
The number of queries that are turned away from being send to nameserver
due to ratelimiting.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.dnscrypt.shared_secret.cachemiss 
The number of dnscrypt queries that did not find a shared secret in the
cache.
This can be use to compute the shared secret hitrate.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.dnscrypt.replay 
The number of dnscrypt queries that found a nonce hit in the nonce cache
and hence are considered a query replay.
.UNINDENT
.INDENT 0.0
.TP
.B num.answer.rcode.NXDOMAIN 
The number of answers to queries, from cache or from recursion, that had
the return code NXDOMAIN.
Also printed for the other return codes.
.UNINDENT
.INDENT 0.0
.TP
.B num.answer.rcode.nodata 
The number of answers to queries that had the pseudo return code nodata.
This means the actual return code was NOERROR, but additionally, no data
was carried in the answer (making what is called a NOERROR/NODATA answer).
These queries are also included in the num.answer.rcode.NOERROR number.
Common for AAAA lookups when an A record exists, and no AAAA.
.UNINDENT
.INDENT 0.0
.TP
.B num.answer.secure 
Number of answers that were secure.
The answer validated correctly.
The AD bit might have been set in some of these answers, where the client
signalled (with DO or AD bit in the query) that they were ready to accept
the AD bit in the answer.
.UNINDENT
.INDENT 0.0
.TP
.B num.answer.bogus 
Number of answers that were bogus.
These answers resulted in SERVFAIL to the client because the answer failed
validation.
.UNINDENT
.INDENT 0.0
.TP
.B num.rrset.bogus 
The number of rrsets marked bogus by the validator.
Increased for every RRset inspection that fails.
.UNINDENT
.INDENT 0.0
.TP
.B num.valops 
The number of validation operations performed by the validator.
Increased for every RRSIG verification operation regardless of the
validation result.
The RRSIG and key combination needs to first pass some sanity checks before
Unbound even performs the verification, e.g., length/protocol checks.
.UNINDENT
.INDENT 0.0
.TP
.B unwanted.queries 
Number of queries that were refused or dropped because they failed the
access control settings.
.UNINDENT
.INDENT 0.0
.TP
.B unwanted.replies 
Replies that were unwanted or unsolicited.
Could have been random traffic, delayed duplicates, very late answers, or
could be spoofing attempts.
Some low level of late answers and delayed duplicates are to be expected
with the UDP protocol.
Very high values could indicate a threat (spoofing).
.UNINDENT
.INDENT 0.0
.TP
.B msg.cache.count 
The number of items (DNS replies) in the message cache.
.UNINDENT
.INDENT 0.0
.TP
.B rrset.cache.count 
The number of RRsets in the rrset cache.
This includes rrsets used by the messages in the message cache, but also
delegation information.
.UNINDENT
.INDENT 0.0
.TP
.B infra.cache.count 
The number of items in the infra cache.
These are IP addresses with their timing and protocol support information.
.UNINDENT
.INDENT 0.0
.TP
.B key.cache.count 
The number of items in the key cache.
These are DNSSEC keys, one item per delegation point, and their validation
status.
.UNINDENT
.INDENT 0.0
.TP
.B msg.cache.max_collisions 
The maximum number of hash table collisions in the msg cache.
This is the number of hashes that are identical when a new element is
inserted in the hash table.
If the value is very large, like hundreds, something is wrong with the
performance of the hash table, hash values are incorrect or malicious.
.UNINDENT
.INDENT 0.0
.TP
.B rrset.cache.max_collisions 
The maximum number of hash table collisions in the rrset cache.
This is the number of hashes that are identical when a new element is
inserted in the hash table.
If the value is very large, like hundreds, something is wrong with the
performance of the hash table, hash values are incorrect or malicious.
.UNINDENT
.INDENT 0.0
.TP
.B dnscrypt_shared_secret.cache.count 
The number of items in the shared secret cache.
These are precomputed shared secrets for a given client public key/server
secret key pair.
Shared secrets are CPU intensive and this cache allows Unbound to avoid
recomputing the shared secret when multiple dnscrypt queries are sent from
the same client.
.UNINDENT
.INDENT 0.0
.TP
.B dnscrypt_nonce.cache.count 
The number of items in the client nonce cache.
This cache is used to prevent dnscrypt queries replay.
The client nonce must be unique for each client public key/server secret
key pair.
This cache should be able to host QPS * \fIreplay window\fP interval keys to
prevent replay of a query during \fIreplay window\fP seconds.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.authzone.up 
The number of queries answered from auth\-zone data, upstream queries.
These queries would otherwise have been sent (with fallback enabled) to the
internet, but are now answered from the auth zone.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.authzone.down 
The number of queries for downstream answered from auth\-zone data.
These queries are from downstream clients, and have had an answer from the
data in the auth zone.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.aggressive.NOERROR 
The number of queries answered using cached NSEC records with NODATA RCODE.
These queries would otherwise have been sent to the internet, but are now
answered using cached data.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.aggressive.NXDOMAIN 
The number of queries answered using cached NSEC records with NXDOMAIN
RCODE.
These queries would otherwise have been sent to the internet, but are now
answered using cached data.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.subnet 
Number of queries that got an answer that contained EDNS client subnet
data.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.subnet_cache 
Number of queries answered from the edns client subnet cache.
These are counted as cachemiss by the main counters, but hit the client
subnet specific cache after getting processed by the edns client subnet
module.
.UNINDENT
.INDENT 0.0
.TP
.B num.query.cachedb 
Number of queries answered from the external cache of cachedb.
These are counted as cachemiss by the main counters, but hit the cachedb
external cache after getting processed by the cachedb module.
.UNINDENT
.INDENT 0.0
.TP
.B num.rpz.action.<rpz_action> 
Number of queries answered using configured RPZ policy, per RPZ action
type.
Possible actions are: nxdomain, nodata, passthru, drop, tcp\-only,
local\-data, disabled, and cname\-override.
.UNINDENT
.SH FILES
.INDENT 0.0
.TP
.B @ub_conf_file@
Unbound configuration file.
.TP
.B @UNBOUND_RUN_DIR@
directory with private keys (\fBunbound_server.key\fP and
\fBunbound_control.key\fP) and self\-signed certificates
(\fBunbound_server.pem\fP and \fBunbound_control.pem\fP).
.UNINDENT
.SH SEE ALSO
.sp
\fI\%unbound.conf(5)\fP,
\fI\%unbound(8)\fP\&.
.SH AUTHOR
Unbound developers are mentioned in the CREDITS file in the distribution.
.SH COPYRIGHT
1999-2025, NLnet Labs
.\" Generated by docutils manpage writer.
.