upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-03-31 15:05:17 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/dev/ath/ath_hal
History
Adrian Chadd 7598a108ff Add a new TX power field - it's inteded to be used where low TX power 
is configured for higher rates (lower than max) but higher TX power
is configured for the lower rates, above the configured cap, to improve
long distance behaviour.
2013-04-05 09:06:39 +00:00
..
ah_regdomain Add new regulatory domain. 2013-03-24 04:42:56 +00:00
ar5210 Begin adding support to explicitly set the current chainmask. 2013-02-25 22:42:43 +00:00
ar5211 Begin adding support to explicitly set the current chainmask. 2013-02-25 22:42:43 +00:00
ar5212 Begin adding support to explicitly set the current chainmask. 2013-02-25 22:42:43 +00:00
ar5312 Stop using the hardware register value byte order swapping for now, 2012-04-19 03:26:21 +00:00
ar5416 CABQ calculation changes to try and fix some weird corner cases leading 2013-03-23 23:51:11 +00:00
ar9001 Since the PLL changes aren't in here yet for the AR9130 half/quarter 2012-10-31 21:14:25 +00:00
ar9002 Use the correct antenna configuration variable here. "diversity" just 2013-03-12 03:03:24 +00:00
ar9003 Add AR9380 devid HAL definitions and probe/attach strings. 2012-08-23 03:03:00 +00:00
ah.c Add in the STBC TX/RX capability support into the HAL and driver. 2013-02-27 00:25:44 +00:00
ah.h HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL. 2013-04-05 07:41:47 +00:00
ah_debug.h HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL. 2013-04-05 07:41:47 +00:00
ah_decode.h Add a threadid to the ah_decode API. 2012-04-04 20:46:20 +00:00
ah_desc.h Extend the TX descriptor debug printing to be properly aware of 2012-08-19 02:22:16 +00:00
ah_devid.h Add the emulation PCI device id - these days, 0xabcd shows up all over 2012-10-31 20:58:24 +00:00
ah_diagcodes.h Add some more diagnostic codes. 2012-08-24 00:17:39 +00:00
ah_eeprom.h Bring over some new EEPROM regulatory domain flags. 2012-08-24 01:14:00 +00:00
ah_eeprom_9287.c Move this magic check to only occur if no eeprom data is given. 2012-08-26 04:26:49 +00:00
ah_eeprom_9287.h Make sure the extended regdomain word is initialised. 2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ah_eeprom_v3.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ah_eeprom_v4k.c "Upgrade" the AR9285 code to support PCI/ART EEPROM on flash. 2012-04-20 21:56:13 +00:00
ah_eeprom_v4k.h Bring over a pdadc calibration fix from ath9k - unused power detector 2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_internal.h Add a new TX power field - it's inteded to be used where low TX power 2013-04-05 09:06:39 +00:00
ah_regdomain.c Add XC900 SKU mapping. 2012-12-07 06:38:30 +00:00
ah_regdomain.h Migrate the regulatory database definitions into separate header files 2011-03-10 03:13:56 +00:00
ah_soc.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00