Poul-Henning Kamp 135bd3f8a1 Make sure set the media type in the phy, we cannot trust it to have chosen ... the type we happen to want. Bug triggered by net-booting soekris hardware which comes up in 10/hdx mode by default.		2004-01-17 10:44:39 +00:00
..
acphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
acphyreg.h
amphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
amphyreg.h
bmtphy.c	Add a device driver for the Broadcom BCM4401 ethernet controller,	2003-09-09 18:17:23 +00:00
bmtphyreg.h
brgphy.c	Replace the if_name and if_unit members of struct ifnet with new members	2003-10-31 18:32:15 +00:00
brgphyreg.h	Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped.	2003-06-17 15:02:28 +00:00
dcphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
e1000phy.c	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
e1000phyreg.h	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
exphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
inphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
inphyreg.h
lxtphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
lxtphyreg.h
mii.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
mii.h
mii_physubr.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
miibus_if.m
miidevs	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
miivar.h
mlphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsgphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsgphyreg.h
nsphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsphyreg.h
pnaphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
pnphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
qsphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
qsphyreg.h
rgephy.c	Clean up dead code.	2003-09-11 08:28:38 +00:00
rgephyreg.h	Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S	2003-09-11 03:53:46 +00:00
rlphy.c	Take the support for the 8139C+/8169/8169S/8110S chips out of the	2003-09-08 02:11:25 +00:00
ruephy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
ruephyreg.h
tdkphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
tdkphyreg.h
tlphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
tlphyreg.h
ukphy.c	Make sure set the media type in the phy, we cannot trust it to have chosen	2004-01-17 10:44:39 +00:00
ukphy_subr.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
xmphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
xmphyreg.h