Pyun YongHyeon 082b754397 Poke correct GPIO pins for newer axe(4) controllers with Marvell ... PHY. Newer models seem to use different LED mode that requires enabling both GPIO1 and GPIO2. Tested by: marcel		2011-06-01 18:42:44 +00:00
..
if_aue.c	- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP	2011-05-03 19:51:29 +00:00
if_auereg.h
if_axe.c	Poke correct GPIO pins for newer axe(4) controllers with Marvell	2011-06-01 18:42:44 +00:00
if_axereg.h	Add initial AX88772A support.	2010-11-28 01:56:44 +00:00
if_cdce.c	Remove unneeded includes of <sys/linker_set.h>. Other headers that use	2011-01-11 13:59:06 +00:00
if_cdcereg.h	The maximum NCM frame size must be so that it	2011-04-26 19:40:37 +00:00
if_cue.c	Remove unneeded includes of <sys/linker_set.h>. Other headers that use	2011-01-11 13:59:06 +00:00
if_cuereg.h
if_ipheth.c	Remove unneeded includes of <sys/linker_set.h>. Other headers that use	2011-01-11 13:59:06 +00:00
if_iphethvar.h	USB Network:	2010-10-13 21:36:42 +00:00
if_kue.c	Remove unneeded includes of <sys/linker_set.h>. Other headers that use	2011-01-11 13:59:06 +00:00
if_kuefw.h
if_kuereg.h
if_mos.c	Trim some additional unnecessary <linker_set.h> includes.	2011-04-28 17:59:33 +00:00
if_mosreg.h	Add support for new USB to ethernet controller:	2011-02-16 08:33:30 +00:00
if_rue.c	- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP	2011-05-03 19:51:29 +00:00
if_ruereg.h	Remove unused struct rue_type	2010-11-15 06:04:25 +00:00
if_udav.c	- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP	2011-05-03 19:51:29 +00:00
if_udavreg.h
uhso.c	Implement ucom_set_pnpinfo_usb() providing ttyname and port number	2010-11-05 19:12:48 +00:00
usb_ethernet.c	Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need	2011-01-18 21:14:23 +00:00
usb_ethernet.h