Warner Losh 380ff59ab1 Add support for Samsung K9F2G08U0A (256MiB SLC) NAND found on some old ... Atmel boards I have. # All Samsung, Toshiba and SanDisk parts will need to be in this table # since they don't conform to the ONFI specification (they are all Toggle # parts). There's some standards for the additional bytes so there's some hope # to decode them automatically on a per-vendor basis, but even that has # problems (and is what motivated the ONFI parameter page).		2013-12-31 07:36:39 +00:00
..
nand.c	Rework the routine that returns a pointer to the table of software ECC	2013-11-15 23:48:51 +00:00
nand.h	Move the luns field to the end of the struct, for serendipitous packing.	2013-11-15 23:45:13 +00:00
nand_bbt.c
nand_cdev.c	Unbreak compilation with GCC.	2013-11-21 09:19:14 +00:00
nand_dev.h
nand_ecc_pos.h
nand_generic.c	ONFI parameters are little-endian, hence we must take care to convert them	2013-11-15 23:41:32 +00:00
nand_geom.c	Unbreak compilation with GCC.	2013-11-21 09:19:14 +00:00
nand_id.c	Add support for Samsung K9F2G08U0A (256MiB SLC) NAND found on some old	2013-12-31 07:36:39 +00:00
nand_if.m
nandbus.c	Look up a nand chip by id in the static table before trying to obtain	2013-11-29 14:23:22 +00:00
nandbus.h
nandbus_if.m
nandsim.c
nandsim.h
nandsim_chip.c
nandsim_chip.h
nandsim_ctrl.c
nandsim_log.c
nandsim_log.h
nandsim_swap.c	Remove the support for using non-mpsafe filesystem modules.	2012-10-22 17:50:54 +00:00
nandsim_swap.h
nfc_at91.c	Add a nand flash controller driver for Atmel at91 family. Tested only	2013-12-02 03:52:40 +00:00
nfc_fsl.c	Add a driver for the Freescale FCM module in the localbus controller.	2012-07-03 01:00:29 +00:00
nfc_fsl.h	Add a driver for the Freescale FCM module in the localbus controller.	2012-07-03 01:00:29 +00:00
nfc_if.m
nfc_mv.c