Gleb Smirnoff c8550c0278 Make net80211 drivers supply their device name to the net80211 layer, so ... that the latter doesn't need to go through struct ifnet to get their name. Sponsored by: Netflix Sponsored by: Nginx, Inc.		2015-05-25 13:51:13 +00:00
..
ath_dfs/null	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
ath_hal	Return the correct HAL data type for HAL_DIAG_ANI_STATS.	2015-04-06 01:12:53 +00:00
ath_rate	Cast everything to something longer than 32 bits so the sample mask	2015-01-28 04:44:42 +00:00
ah_osdep.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath.c	Make net80211 drivers supply their device name to the net80211 layer, so	2015-05-25 13:51:13 +00:00
if_ath_ahb.c	Lay some groundwork for having this stuff hang off of AHB rather than	2015-03-02 02:14:44 +00:00
if_ath_alq.c	Support sending ATH_ALQ messages with no payload.	2013-05-13 21:17:27 +00:00
if_ath_alq.h	Add ALQ beacon debugging.	2013-05-13 21:18:00 +00:00
if_ath_beacon.c	Shut down RX before TX - in theory, this should make the chip less likely	2014-08-23 18:55:51 +00:00
if_ath_beacon.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_btcoex.c	Until there's a full MCI implementation - just implement a placeholder	2015-01-17 00:02:18 +00:00
if_ath_btcoex.h	Bring over the initial static bluetooth coexistence configuration	2013-06-07 09:02:02 +00:00
if_ath_debug.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
if_ath_debug.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.h
if_ath_led.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_lna_div.c	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00
if_ath_lna_div.h	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_misc.h	Add tracking for self-generated frames when the VAP is in sleep state.	2014-05-02 00:48:09 +00:00
if_ath_pci.c	Move the lock destruction/creation to earlier in the process - if	2015-02-14 18:14:45 +00:00
if_ath_pci_devlist.h	Add a missing file from the last commit.	2014-09-30 05:50:34 +00:00
if_ath_rx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_rx_edma.c	Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.	2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_spectral.c	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Bump the valid GPIO range for rfkill up from 8 to 16.	2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Add casts to have it compile on amd64 without complaining about	2014-05-07 19:07:45 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_tx.h	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath_tx_edma.c	Quieten the RX/TX descriptor and FIFO setup debugging.	2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00