upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-03-01 12:51:07 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/dev/mii
History
Marius Strobl fb772a6c98 Move the limiting of the PHY to 10/100 modes of operation due to limitations 
of certain MAC models from brgphy(4) to bge(4) where it belongs. While at it,
update the list of models having that restriction to what OpenBSD uses, which
in turn seems to have obtained that information from the Linux tg3 driver.
2010-11-14 15:15:22 +00:00
..
acphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
acphyreg.h - Correct the AC_MCTL_BYP_PCS constant. 2007-01-12 22:58:04 +00:00
amphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
amphyreg.h Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
atphy.c - Change these drivers to take advantage and use the generic IEEE 802.3 2010-11-14 13:31:01 +00:00
atphyreg.h Add Attansic/Atheros F1 PHY driver. 2008-05-19 01:12:10 +00:00
axphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
bmtphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
bmtphyreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
brgphy.c Move the limiting of the PHY to 10/100 modes of operation due to limitations 2010-11-14 15:15:22 +00:00
brgphyreg.h Correct definition of T2 mode bit of MRBE Message Page 5 Next Page 2010-09-08 21:08:54 +00:00
ciphy.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
ciphyreg.h Add support Vitesse VSC8601 PHY that is found on nVidia network 2007-06-06 06:55:49 +00:00
e1000phy.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
e1000phyreg.h Add hack to pass controller specific information to phy driver. 2009-09-28 21:03:28 +00:00
exphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
gentbi.c - Change these drivers to take advantage and use the generic IEEE 802.3 2010-11-14 13:31:01 +00:00
icsphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
icsphyreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
inphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
inphyreg.h Add drivers for Intel 82553 and 82555 PHYs. 2001-03-12 02:41:57 +00:00
ip1000phy.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
ip1000phyreg.h For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
jmphy.c - Change these drivers to take advantage and use the generic IEEE 802.3 2010-11-14 13:31:01 +00:00
jmphyreg.h Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
lxtphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
lxtphyreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
mii.c Now that all previous users of mii_phy_probe() have been converted 2010-10-15 15:46:58 +00:00
mii.h o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
mii_physubr.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
miibus_if.m Add new device method miibus_linkchg, along with a service routine. 2001-09-29 18:40:06 +00:00
miidevs Recognize the BCM5482S. 2010-11-08 21:23:28 +00:00
miivar.h o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
mlphy.c - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
nsgphy.c - Change these drivers to take advantage and use the generic IEEE 802.3 2010-11-14 13:31:01 +00:00
nsgphyreg.h Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
nsphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
nsphyreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
nsphyter.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
nsphyterreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
pnaphy.c Take advantage of mii_phy_add_media()/mii_phy_setmedia(). 2010-10-24 11:38:25 +00:00
qsphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
qsphyreg.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 17:55:51 +00:00
rgephy.c - Change these drivers to take advantage and use the generic IEEE 802.3 2010-11-14 13:31:01 +00:00
rgephyreg.h Add RTL8211C(L) support. 2008-07-02 08:10:18 +00:00
rlphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
rlswitch.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
ruephy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
ruephyreg.h Add RealTek RTL8150 USB to fast Ethernet controller driver. 2003-05-03 10:16:56 +00:00
smcphy.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
tdkphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
tdkphyreg.h Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
tlphy.c - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
tlphyreg.h - Remove clause 3 and 4 from TNF licenses. 2010-09-26 22:11:41 +00:00
truephy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
truephyreg.h Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:30:44 +00:00
ukphy.c Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
ukphy_subr.c o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
xmphy.c Remove redundant cases and a style(9) bug. 2010-11-14 14:25:04 +00:00
xmphyreg.h Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00