Luiz Otavio O Souza aee2c3a86a Always ignore the START and STOP bits whenever the control register is ... being overwritten, they are set only bits (cleared by hardware). Disable the Acknowledge of the controller slave address. The slave mode is not supported. Make sure the interrupt flag bit is being cleared as recommended, add a delay() _after_ clear the interrupt bit. Sponsored by: Rubicon Communications, LLC (Netgate)		2017-06-20 18:38:51 +00:00
..
twsi	Always ignore the START and STOP bits whenever the control register is	2017-06-20 18:38:51 +00:00
ad7417.c	Do the ADC init only at startup and not during every sensor read call.	2012-08-19 19:31:36 +00:00
ad7418.c	Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays	2013-01-30 18:01:20 +00:00
adm1030.c	Move the adm1030 driver to the proper location, and rename it.	2014-10-16 01:32:22 +00:00
adt746x.c	Use OF_prop_free instead of direct call to free(9)	2016-05-14 20:06:38 +00:00
ds133x.c	sys/dev: minor spelling fixes.	2016-05-03 03:41:25 +00:00
ds1307.c	Fix ds1307 probing	2016-09-24 05:27:12 +00:00
ds1307reg.h	Add support for the Microchip mcp7941x.	2016-04-05 03:27:33 +00:00
ds1374.c	Don't include MIPS machine headers. There's no need for it.	2012-05-19 17:42:11 +00:00
ds1631.c	Make more unsigned ints signed.	2013-12-07 22:25:07 +00:00
ds1672.c	Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays	2013-01-30 18:01:20 +00:00
ds1775.c	Make more unsigned ints signed.	2013-12-07 22:25:07 +00:00
ds3231.c	Fix off-by-one bugs.	2015-03-10 14:55:05 +00:00
ds3231reg.h	Fix the deciKelvin to Celsius conversion in kernel.	2016-05-22 13:58:32 +00:00
icee.c	Add FDT compatibility to the icee driver.	2015-10-22 01:04:31 +00:00
if_ic.c	sys/dev: Replace zero with NULL for pointers.	2017-02-20 03:43:12 +00:00
iic.c	iic_rdwr_data->nmsgs is uint32_t, so limit the allowable number of messages to prevent memory exhaustion and short allocations on 32-bit systems. Since iicrdwr is intended to be a workalike of a Linux i2c-dev call, use the same limit of 42 that Linux uses.	2016-05-20 03:03:04 +00:00
iic.h	iic_rdwr_data->nmsgs is uint32_t, so limit the allowable number of messages to prevent memory exhaustion and short allocations on 32-bit systems. Since iicrdwr is intended to be a workalike of a Linux i2c-dev call, use the same limit of 42 that Linux uses.	2016-05-20 03:03:04 +00:00
iicbb.c	iicbus: Use device_delete_children() instead of explicit child removal	2015-10-20 19:52:59 +00:00
iicbb_if.m	Remove a couple of extra blank lines.	2016-05-22 04:09:05 +00:00
iicbus.c	add iic interface to ig4 driver, move isl and cyapa to iicbus	2016-10-30 12:15:33 +00:00
iicbus.h	Handle IRQ resources on iicbus and ofw_iicbus.	2015-05-09 03:05:44 +00:00
iicbus_if.m	Fix numerous issues in iic(4) and iicbus(4):	2015-04-21 11:50:31 +00:00
iicoc.c	Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().	2016-02-27 03:38:01 +00:00
iicoc.h	Driver for OpenCores I2C controller.	2012-03-27 10:44:32 +00:00
iiconf.c	Remove a couple of extra blank lines.	2016-05-22 04:09:05 +00:00
iiconf.h	sys/dev: minor spelling fixes.	2016-05-03 03:41:25 +00:00
iicsmb.c	iicsmb: SMB_MAXBLOCKSIZE can be used again	2016-11-11 15:11:54 +00:00
lm75.c	Fix the deciKelvin to Celsius conversion in kernel.	2016-05-22 13:58:32 +00:00
max6690.c	Check error return from reading integer part of temperature.	2014-10-12 23:48:55 +00:00
ofw_iicbus.c	Make ofw_iicbus attach to twsi I2C controllers.	2017-06-20 18:25:27 +00:00
pcf8563.c	Make the pcf8563 RTC work on FDT systems and on interrupt based i2c	2015-04-25 21:43:29 +00:00
pcf8563reg.h	Add a driver for the NXP (Philips) PCF8563 RTC.	2012-04-13 23:07:32 +00:00
s35390a.c	Remove unused variables.	2012-09-29 16:15:27 +00:00
sy8106a.c	Add driver for Silergy Corp. SY8106A buck regulator.	2016-09-05 13:39:54 +00:00