Warner Losh 201aec8321 In the ISA case, we call ed_probe_WD80x3 before we call ... ed_probe_rtl80x9. In the pci case we call ed_probe_rtl80x9 first. In the PCI case we were using the correct nic_offset by accident because softc is initialized to zero. In the isa case we were using the wrong value by accident, since ed_probe_WD80x3 sets the offset value to 0x10. This lead to the identification routines failing. Fix this problem by always initalizing the nic_offset and asic_offset before making ed_{asic,nic}_{in,out}* calls.		2005-10-22 05:14:18 +00:00
..
ax88x90reg.h	MFp4:	2005-10-05 05:21:07 +00:00
dl100xxreg.h	MFp4:	2005-10-05 05:21:07 +00:00
if_ed.c	Go ahead and detach our children in our detach routine. I'm undecided	2005-09-26 18:22:24 +00:00
if_ed98.h	Remove ifdef PC98.	2005-04-13 13:02:58 +00:00
if_ed_3c503.c	Finish conversion to bus space and make ed MP safe.	2005-08-28 23:56:25 +00:00
if_ed_cbus.c	Make device_detach methods really work.	2005-09-14 19:03:14 +00:00
if_ed_hpp.c	Finish conversion to bus space and make ed MP safe.	2005-08-28 23:56:25 +00:00
if_ed_isa.c	Check against 8019 rather than 8029 for reading in the MAC addr since	2005-10-17 02:32:23 +00:00
if_ed_novell.c	o Expose ed_probe_Novel_generic, it is useful for pccard case.	2005-09-07 03:20:33 +00:00
if_ed_pccard.c	Buffalo LPC4/CLX ID	2005-10-11 01:04:16 +00:00
if_ed_pci.c	If we can't probe the RTL80x9 for some reason, fall back to probing it	2005-10-13 22:12:34 +00:00
if_ed_rtl80x9.c	In the ISA case, we call ed_probe_WD80x3 before we call	2005-10-22 05:14:18 +00:00
if_ed_sic.c	Finish conversion to bus space and make ed MP safe.	2005-08-28 23:56:25 +00:00
if_ed_wd80x3.c	Finish conversion to bus space and make ed MP safe.	2005-08-28 23:56:25 +00:00
if_edreg.h	MFp4:	2005-10-05 05:21:07 +00:00
if_edvar.h	MFp4:	2005-10-05 05:21:07 +00:00
rtl80x9reg.h	MFp4:	2005-10-05 05:21:07 +00:00
tc5299jreg.h	MFp4:	2005-10-05 05:21:07 +00:00