986bbba9a6
On Armada8k boards various peripherals (e.g. USB) have interrupt lines connected to on of the ICU interrupt controllers. After an interrupt is detected it triggers MSI to a given address, with a programmed value. This in turn triggers an SPI interrupt. Normally MSI vector should be allocated by ICUs parent and set during interrupt allocation. Instead of doing that we relied on the ICU being pre-configured in firmware. This worked with EDK2 and older versions of U-Boot, but in the newer ones that is no longer the case. Extend ICU msi-parents - GICP and SEI to support MSI interface and use it during interrupt allocation. This allows us to boot on Armada 7k/8k SoCs independent from the firmware configuration and successfully use modern U-Boot + device tree. For SATA interrupts we need to apply a WA previously done in firmware. We have two SATA ports connected to one controller. Each ports gets its own interrupt, but only one of them is described in dts, also ahci_generic driver expects only one irq too. Fix it by mapping both interrupts to the same MSI when one of them is allocated, which allows us to use both SATA ports. Reviewed by: mmel, mw Obtained from: Semihalf Sponsored by: Marvell Differential Revision: https://reviews.freebsd.org/D28803 |
||
|---|---|---|
| .cirrus-ci | ||
| .github | ||
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| stand | ||
| sys | ||
| targets | ||
| tests | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| .arcconfig | ||
| .arclint | ||
| .cirrus.yml | ||
| .clang-format | ||
| .gitattributes | ||
| .gitignore | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| Makefile.libcompat | ||
| Makefile.sys.inc | ||
| ObsoleteFiles.inc | ||
| README.md | ||
| RELNOTES | ||
| UPDATING | ||
FreeBSD Source:
This is the top level of the FreeBSD source directory.
FreeBSD is an operating system used to power modern servers, desktops, and embedded platforms. A large community has continually developed it for more than thirty years. Its advanced networking, security, and storage features have made FreeBSD the platform of choice for many of the busiest web sites and most pervasive embedded networking and storage devices.
For copyright information, please see the file COPYRIGHT in this directory. Additional copyright information also exists for some sources in this tree - please see the specific source directories for more information.
The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7), config(8), FreeBSD handbook on building userland, and Handbook for kernels for more information, including setting make(1) variables.
Source Roadmap:
| Directory | Description |
|---|---|
| bin | System/user commands. |
| cddl | Various commands and libraries under the Common Development and Distribution License. |
| contrib | Packages contributed by 3rd parties. |
| crypto | Cryptography stuff (see crypto/README). |
| etc | Template files for /etc. |
| gnu | Various commands and libraries under the GNU Public License. Please see gnu/COPYING and gnu/COPYING.LIB for more information. |
| include | System include files. |
| kerberos5 | Kerberos5 (Heimdal) package. |
| lib | System libraries. |
| libexec | System daemons. |
| release | Release building Makefile & associated tools. |
| rescue | Build system for statically linked /rescue utilities. |
| sbin | System commands. |
| secure | Cryptographic libraries and commands. |
| share | Shared resources. |
| stand | Boot loader sources. |
| sys | Kernel sources. |
sys/arch/conf |
Kernel configuration files. GENERIC is the configuration used in release builds. NOTES contains documentation of all possible entries. |
| tests | Regression tests which can be run by Kyua. See tests/README for additional information. |
| tools | Utilities for regression testing and miscellaneous tasks. |
| usr.bin | User commands. |
| usr.sbin | System administration commands. |
For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see FreeBSD Handbook.