Pyun YongHyeon cb2ed75f7e Add check for fiber mode for BCM5714 PHY. This PHY supports both ... copper and fiber interfaces over GMII so an explicit check is necessary to know whether it was configured for fiber interface. This change make BCM5715S work. Tested by: olli MFC after: 1 week		2010-01-14 19:14:24 +00:00
..
acphy.c
acphyreg.h
amphy.c	Fix a typo in a comment.	2008-01-27 01:11:57 +00:00
amphyreg.h
atphy.c	Use auto-negotiation for manual media type selection. This fixes	2008-10-25 06:39:17 +00:00
atphyreg.h	Add Attansic/Atheros F1 PHY driver.	2008-05-19 01:12:10 +00:00
axphy.c	New PHY driver for the internal PHY found in the AX88790. There's a	2009-03-30 16:01:09 +00:00
axphyreg.h	New PHY driver for the internal PHY found in the AX88790. There's a	2009-03-30 16:01:09 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c	Add check for fiber mode for BCM5714 PHY. This PHY supports both	2010-01-14 19:14:24 +00:00
brgphyreg.h	Add support for the BCM5906[M] adapters. These adapters only support	2008-04-29 19:47:13 +00:00
ciphy.c	Correct PHY description and OUI of VSC8211. Previously VSC8211 was	2008-10-23 01:27:15 +00:00
ciphyreg.h	Add support Vitesse VSC8601 PHY that is found on nVidia network	2007-06-06 06:55:49 +00:00
e1000phy.c	Add hack to pass controller specific information to phy driver.	2009-09-28 21:03:28 +00:00
e1000phyreg.h	Add hack to pass controller specific information to phy driver.	2009-09-28 21:03:28 +00:00
exphy.c
gentbi.c	- Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4)	2007-10-29 21:11:55 +00:00
icsphy.c	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
icsphyreg.h	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
inphy.c
inphyreg.h
ip1000phy.c	Make sure to enable Next Page bit for IP1001. Otherwise the PHY	2009-12-18 21:57:51 +00:00
ip1000phyreg.h	For IP1001 PHYs, read auto-negotiation advertisement register to	2009-03-09 08:17:46 +00:00
jmphy.c	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
jmphyreg.h	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
lxtphy.c	Add support for the Apple Big Mac (BMAC) Ethernet controller,	2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii.c	Revert bogusly committed file.	2008-08-23 07:46:58 +00:00
mii.h
mii_physubr.c
miibus_if.m
miidevs	Add BCM5754 PHY id that is found on Dell Studio XPS 16.	2010-01-14 00:36:49 +00:00
miivar.h
mlphy.c	Move the code that looks for the companion phy to a subroutine to make	2008-08-23 15:50:18 +00:00
nsgphy.c	- Also probe DP83865, which is an is an ultra low power version	2009-06-13 23:27:04 +00:00
nsgphyreg.h
nsphy.c	- Fix a typo in a comment.	2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
nsphyterreg.h	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c	Fix a copy/paste error	2008-08-06 07:52:59 +00:00
rgephyreg.h	Add RTL8211C(L) support.	2008-07-02 08:10:18 +00:00
rlphy.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c	This is a rewritten driver for the SMSC LAN91C111. It's based in part on the	2008-06-06 05:00:49 +00:00
tdkphy.c	cardbus -> CardBus	2010-01-03 23:31:58 +00:00
tdkphyreg.h
tlphy.c	It turns out that my analysis of the error handling here was wrong.	2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c	Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc	2008-11-28 23:44:13 +00:00
truephyreg.h	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
ukphy.c
ukphy_subr.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
xmphy.c
xmphyreg.h