Ian Lepore 51dbd04609 Convert from using fdt_immr style to arm_devmap_add_entry() to make ... static device mappings. This SoC relied heavily on the fact that all devices were static-mapped at a fixed address, and it (rather bogusly) used bus_space read and write calls passing hard-coded virtual addresses instead of proper bus handles, relying on the fact that the virtual addresses of the mappings were known at compile time, and relying on the implementation details of arm bus_space never changing. All such usage was replaced with calls to bus_space_map() to obtain a proper bus handle for the read/write calls. This required adjusting some of the #define values that map out hardware registers, and some of them were renamed in the process to make it clear which were defining absolute physical addresses and which were defining offsets. (The ones that just define offsets don't appear to be referenced and probably serve no value other than perhaps documentation.)		2014-01-05 18:40:06 +00:00
..
uart.h	Add support for Freescale Vybrid Family VF600 heterogeneous	2013-11-12 18:02:56 +00:00
uart_bus.h	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_acpi.c	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_ebus.c
uart_bus_fdt.c	Add support for Freescale Vybrid Family VF600 heterogeneous	2013-11-12 18:02:56 +00:00
uart_bus_isa.c	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_pccard.c
uart_bus_pci.c	Add another HP iLO serial (console) port, found on Itanium servers.	2013-12-24 19:58:27 +00:00
uart_bus_puc.c
uart_bus_scc.c
uart_core.c	Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable	2013-08-19 15:51:30 +00:00
uart_cpu.h	Plumb the cn_grab and cn_ungrab routines down into the uart	2013-12-21 16:23:31 +00:00
uart_cpu_fdt.c	Arrange for uart_cpu_fdt's probe() routine to use the same table of compat	2013-11-02 20:14:39 +00:00
uart_cpu_ia64.c
uart_cpu_pc98.c
uart_cpu_powerpc.c	Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use	2013-12-01 19:05:32 +00:00
uart_cpu_sparc64.c
uart_cpu_x86.c
uart_dbg.c
uart_dev_imx.c	Fix crossed fingers output. Only comment changed.	2013-10-24 09:27:06 +00:00
uart_dev_imx5xx.h	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
uart_dev_lpc.c	Convert from using fdt_immr style to arm_devmap_add_entry() to make	2014-01-05 18:40:06 +00:00
uart_dev_ns8250.c	Wait for DesignWare UART transfers completion before accessing line control	2013-10-26 17:24:59 +00:00
uart_dev_ns8250.h	Make the uart ns8250 high-level interface public rather than static.	2013-08-21 14:26:15 +00:00
uart_dev_pl011.c	Calculate the baud rate divisor rather than using a hard-coded value.	2013-10-20 23:40:16 +00:00
uart_dev_quicc.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_dev_sab82532.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_dev_ti8250.c	Add support for uarts other than the serial console in TI OMAP SoCs.	2013-08-21 14:33:02 +00:00
uart_dev_z8530.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_if.m
uart_kbd_sun.c
uart_kbd_sun.h
uart_kbd_sun_tables.h
uart_subr.c	Teach UART to attach Exynos/s3/s5 class driver.	2013-06-29 23:48:08 +00:00
uart_tty.c	Plumb the cn_grab and cn_ungrab routines down into the uart	2013-12-21 16:23:31 +00:00