Marcin Wojtas 2b33ffde2e Introduce the SDHCI driver for NXP QorIQ Layerscape SoCs ... Implement support for an eSDHC controller found in NXP QorIQ Layerscape SoCs. This driver has been tested with NXP LS1046A and LX2160A (Honeycomb board), which is incompatible with the existing sdhci_fsl driver (aiming at older chips from this family). As such, it is not intended as replacement for the old driver, but rather serves as an improved alternative for SoCs that support it. It comes with support for both PIO and Single DMA modes and samples the clock from the extres clk API. Submitted by: Artur Rojek <ar@semihalf.com> Reviewed by: manu, mmel, kibab Obtained from: Semihalf Sponsored by: Alstom Group Differential Revision: https://reviews.freebsd.org/D26153		2020-09-01 16:17:21 +00:00
..
fsl_sdhci.c	o Don't allocate resources for SDMA in sdhci(4) if the controller or the	2018-12-30 23:08:06 +00:00
sdhci.c	mmccam: Add a generic mmccam_start_discovery function	2020-07-22 18:30:17 +00:00
sdhci.h	Align struct sdhci_slot MMCCAM members.	2019-03-21 10:23:02 +00:00
sdhci_acpi.c	o Don't allocate resources for SDMA in sdhci(4) if the controller or the	2018-12-30 23:08:06 +00:00
sdhci_fdt.c	Add emmc support for Rockchip RK3399 SoC.	2019-07-20 02:53:06 +00:00
sdhci_fdt_gpio.c	Release all previously allocated resources.	2017-03-08 14:52:03 +00:00
sdhci_fdt_gpio.h	Add new helper routines for sdhci bridge drivers that use gpio pins for	2017-01-09 01:54:36 +00:00
sdhci_fsl_fdt.c	Introduce the SDHCI driver for NXP QorIQ Layerscape SoCs	2020-09-01 16:17:21 +00:00
sdhci_if.m	Regularize my copyright notice	2019-12-04 16:56:11 +00:00
sdhci_pci.c	sdhci(4): Recognize the Texas Instruments PCIxx12 card reader.	2020-08-25 18:32:43 +00:00
sdhci_xenon.c	Add support for the GPIO SD Card VCC regulator/switch and the GPIO SD Card	2019-06-10 21:50:07 +00:00
sdhci_xenon.h	Add support to the Marvell Xenon SDHCI controller.	2018-08-14 16:33:30 +00:00