opnsense-src/sys/dev/ath/ath_hal/ar5416
Adrian Chadd dc809fc15f Flip on fast frames support for AR5416 and AR9300 series NICs.
This was off because the net80211 aggregation code was using the same
state pointers for both fast frames and ampdu tx support which led to some
pretty unfortunate panic-y behaviour.

Now that net80211 doesn't panic, let's flip this back on.

It doesn't (yet) do the horrific sounding thing of A-MPDU aggregates
of fast frames; that'll come next.  It's a pre-requisite to supporting
AMSDU + AMPDU anyway, which actually speeds things up quite considerably
(think packing lots of little ACK frames into a single AMSDU.)

Tested:

* QCA955x SoC, AP mode
* AR5416, STA mode
* AR9170, STA mode (with local fast frame patches)
2015-10-10 00:13:45 +00:00
..
ar2133.c Implement the quarter rate fractional channel programming for the 2012-10-04 15:42:45 +00:00
ar5416.h Setup needed tables for TPC on AR5416->AR9287 chips. 2013-04-17 07:31:53 +00:00
ar5416.ini Fix the addac serial load register write for AR5416. 2011-09-06 10:49:05 +00:00
ar5416_ani.c Move the HAL channel survey support out to be in the top-level HAL, 2015-03-29 21:50:21 +00:00
ar5416_attach.c Flip on fast frames support for AR5416 and AR9300 series NICs. 2015-10-10 00:13:45 +00:00
ar5416_beacon.c Program the AR_TSFOOR_THRESHOLD register with a default lifted from 2014-04-27 23:35:05 +00:00
ar5416_btcoex.c Add bluetooth fixes to the AR5416/AR92xx HAL: 2013-06-07 05:17:58 +00:00
ar5416_btcoex.h Remove duplicate entries. 2012-06-27 03:00:29 +00:00
ar5416_cal.c Oops; correctly reload the CCA registers with the uncapped value 2015-01-17 07:33:02 +00:00
ar5416_cal.h Introduce methods for the initial calibration and the new PA calibration 2011-03-11 11:35:36 +00:00
ar5416_cal_adcdc.c Replace Id keyword with the FreeBSD keyword. 2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c Replace Id keyword with the FreeBSD keyword. 2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c Fix the calibration logic to correctly clamp the calculated coefficient. 2010-08-14 15:28:15 +00:00
ar5416_eeprom.c Replace Id keyword with the FreeBSD keyword. 2010-01-29 10:07:17 +00:00
ar5416_gpio.c Bring over the initial 802.11n bluetooth coexistence support code. 2012-06-26 22:16:53 +00:00
ar5416_interrupts.c Do a read-after-write to ensure the interrupt register update is flushed 2014-04-27 23:31:42 +00:00
ar5416_keycache.c Replace Id keyword with the FreeBSD keyword. 2010-01-29 10:07:17 +00:00
ar5416_misc.c Fix build break - the SetCapability calls return HAL_BOOL, 2013-05-21 14:28:05 +00:00
ar5416_phy.c Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic, 2011-02-21 05:10:34 +00:00
ar5416_power.c * Only update ah_powerMode if we're setting the chip sleep state. 2014-04-30 02:03:13 +00:00
ar5416_radar.c Implement an API to fetch the default DFS parameters for the given chip. 2012-08-24 01:29:46 +00:00
ar5416_recv.c Implement STBC receive frame statistics. 2013-05-08 01:11:25 +00:00
ar5416_reset.c Move the HAL channel survey support out to be in the top-level HAL, 2015-03-29 21:50:21 +00:00
ar5416_spectral.c Fix the short repeat option code to not flip the option to 0 when 2013-01-02 03:56:20 +00:00
ar5416_xmit.c Setup needed tables for TPC on AR5416->AR9287 chips. 2013-04-17 07:31:53 +00:00
ar5416desc.h Implement STBC receive frame statistics. 2013-05-08 01:11:25 +00:00
ar5416phy.h Bring over the basic spectral scan framework code from Qualcomm Atheros. 2013-01-02 00:38:01 +00:00
ar5416reg.h Fix the AR_SLEEP1 and AR_SLEEP2 definitions. Oops! 2014-04-27 23:33:37 +00:00