upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-05-04 17:05:14 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/dev/ath/ath_hal
History
Adrian Chadd 9a4cf01f45 Add Atheros AR1111 support to the HAL. 
This seems to probe/attach as an AR9485 and thus nothing else besides
adding the device id seems to be required.

ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1926.8
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000

The NIC I have here is a 1 antenna, 2GHz only device.

Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC.

Tested:

* AR1111 (pretending not to be an AR9485, but failing miserably);
  STA mode with powersave.

Relnotes:	yes
Sponsored by:	Netgate
2014-05-05 07:58:05 +00:00
..
ah_regdomain PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux 2014-02-23 18:07:17 +00:00
ar5210 * Only update ah_powerMode if we're setting the chip sleep state. 2014-04-30 02:03:13 +00:00
ar5211 * Only update ah_powerMode if we're setting the chip sleep state. 2014-04-30 02:03:13 +00:00
ar5212 * Only update ah_powerMode if we're setting the chip sleep state. 2014-04-30 02:03:13 +00:00
ar5312 Migrate the chip power mode status to public ath_hal, rather than the 2014-03-10 06:03:35 +00:00
ar5416 * Only update ah_powerMode if we're setting the chip sleep state. 2014-04-30 02:03:13 +00:00
ar9001 Use the TPC bank by default for AR9160. 2013-04-17 07:22:23 +00:00
ar9002 Set the antenna "config group" field. 2013-06-12 15:18:10 +00:00
ar9003 Add device identification and probe/attach support for the QCA9565. 2013-05-02 00:59:39 +00:00
ah.c * Add a new capability which returns whether the hardware supports 2014-04-27 23:36:44 +00:00
ah.h * Add a new capability which returns whether the hardware supports 2014-04-27 23:36:44 +00:00
ah_debug.h HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL. 2013-04-05 07:41:47 +00:00
ah_decode.h Add a threadid to the ah_decode API. 2012-04-04 20:46:20 +00:00
ah_desc.h Document the AR9285/AR9485 LNA configuration information that's 2013-06-05 00:39:20 +00:00
ah_devid.h Add Atheros AR1111 support to the HAL. 2014-05-05 07:58:05 +00:00
ah_diagcodes.h Add some more diagnostic codes. 2012-08-24 00:17:39 +00:00
ah_eeprom.h Bring over some new EEPROM regulatory domain flags. 2012-08-24 01:14:00 +00:00
ah_eeprom_9287.c Move this magic check to only occur if no eeprom data is given. 2012-08-26 04:26:49 +00:00
ah_eeprom_9287.h
ah_eeprom_v1.c
ah_eeprom_v1.h
ah_eeprom_v3.c
ah_eeprom_v3.h
ah_eeprom_v4k.c "Upgrade" the AR9285 code to support PCI/ART EEPROM on flash. 2012-04-20 21:56:13 +00:00
ah_eeprom_v4k.h
ah_eeprom_v14.c
ah_eeprom_v14.h
ah_internal.h * Add a new capability which returns whether the hardware supports 2014-04-27 23:36:44 +00:00
ah_regdomain.c PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux 2014-02-23 18:07:17 +00:00
ah_regdomain.h
ah_soc.h