upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-04-21 14:17:06 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/dev/ath/ath_hal/ar5211
History
Adrian Chadd ad3e6dcd37 Break out the TX descriptor link field into HAL methods. 
The DMA FIFO chips (AR93xx and later) differ slightly to th elegacy
chips:

* The RX DMA descriptors don't have a ds_link field;
* The TX DMA descriptors have a ds_link field however at a different
  offset.

This is a reimplementation based on what the reference driver and ath9k
does.

A subsequent commit will enable it in the TX and beacon paths.

Obtained from:	Linux ath9k, Qualcomm Atheros
2012-07-19 02:25:14 +00:00
..
ar5211.h Break out the TX descriptor link field into HAL methods. 2012-07-19 02:25:14 +00:00
ar5211_attach.c Break out the TX descriptor link field into HAL methods. 2012-07-19 02:25:14 +00:00
ar5211_beacon.c Update the TSF and next-TBTT methods to work for the AR5416 and later NICs. 2011-09-08 01:23:05 +00:00
ar5211_interrupts.c remove special handling for BNR; it is direct mapped to the harwdare so 2009-05-19 17:35:15 +00:00
ar5211_keycache.c Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ar5211_misc.c Add some empty DFS methods for AR5210/AR5211 for now, if DFS is enabled 2012-05-09 18:17:01 +00:00
ar5211_phy.c o eliminate a << in calculating the tx time for turbo mode by pre-multiplying 2009-04-13 21:01:08 +00:00
ar5211_power.c Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ar5211_recv.c Extend the RX HAL API to include the RX queue identifier. 2012-07-09 07:19:11 +00:00
ar5211_reset.c Stop using the hardware register value byte order swapping for now, 2012-04-19 03:26:21 +00:00
ar5211_xmit.c Break out the TX descriptor link field into HAL methods. 2012-07-19 02:25:14 +00:00
ar5211desc.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ar5211phy.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ar5211reg.h Reapply r228785 now it has been tested by Adrian. Also add comments 2011-12-30 02:58:37 +00:00
boss.ini Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00