Adrian Chadd 11f0fa784e AR5212 radar pulse fixes. ... Fix the strong signal diversity capability setting - I had totally messed up the indentation. Set the default values to match what's in the .ini for now, rather than what values I had previously gleaned from places. This seems to work quite well for the early AR5212 NICs I have. Of course, later NICs have different PHYs and the radar configuration is very card/board dependent.. Tested: * ath1: AR5212 mac 5.3 RF5111 phy 4.1 ath1: 2GHz radio: 0x0023; 5GHz radio: 0x0017 This detects 1, 5, 25, 50, 75, 100uS pulses reliably (with no interference.) However, 10uS pulses don't detect reliably. That may be around the transition between short and long pulses so some further tuning may improve things.		2012-09-02 04:56:29 +00:00
..
ath_dfs/null	Remove the hard-coded AR5416-series parameters and instead use the	2012-08-24 17:39:57 +00:00
ath_hal	AR5212 radar pulse fixes.	2012-09-02 04:56:29 +00:00
ath_rate	Improve the sample rate logging.	2012-08-27 20:30:07 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath.c	There's no nede to allocate a DMA map just before calling bus_dmamem_alloc().	2012-08-29 16:58:51 +00:00
if_ath_ahb.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	Only print the descriptor contents!	2012-08-27 23:27:41 +00:00
if_ath_debug.h	Map ATH_KTR_* to 0 when ATH_DEBUG is not defined. This effectively NOPs	2012-07-11 12:10:13 +00:00
if_ath_keycache.c	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Break out the TX completion code into a separate function, so it can be	2012-08-14 22:32:20 +00:00
if_ath_pci.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_rx.c	Remove extra debugging - there's no longer any need.	2012-08-29 00:53:41 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_rx_edma.c	Remove - not needed.	2012-08-29 00:53:58 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_sysctl.c	Dump out the TX FIFO depth.	2012-08-14 22:34:22 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx.c	Fix a build issue when ATH_DEBUG isn't defined - just initialise and use	2012-08-20 18:57:41 +00:00
if_ath_tx.h	Revert the ath_tx_draintxq() method, and instead teach it the minimum	2012-08-12 00:46:15 +00:00
if_ath_tx_edma.c	Initialise an uninitialised variable.	2012-08-21 16:44:25 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Shuffle the call to ath_hal_setuplasttxdesc() to _after_ the rate control	2012-07-31 17:08:29 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Placeholder ioctl for an upcoming rate control statistics API change.	2012-07-31 02:18:10 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Add an accessor macro for getting access to the default DFS parameters.	2012-08-24 17:37:12 +00:00