mirror of
https://github.com/opnsense/src.git
synced 2026-06-26 08:59:26 -04:00
This is an attempt to reverse engineer what the actual transmit power calculations are doing and apply net80211 limits on them. It doesn't look as simple as just applying the check at the end - there are plenty of places where offsets are calculated between different PHY modes and 1 / 2 antenna MCS transmit rates. There are also some places where the offset being added is negative, so handle the potential underflow so when things hit 0, they don't just wrap and cause the maximum transmit power into the registers. This is being done to aide in power/performance debugging - if there are issues with the transmit power being wrongly calculated and are too high, the output waveform will be distorted and it will effect performance. Being able to drop the transmit power by a few dB here and there can quickly identify if this is happening (because suddenly higher MCS rates / OFDM rates suddenly work better!) I've tested each NIC through the transmit power values from 0 dBm to 30dBm via ifconfig (and they're all capped far before that, normally around 20-25dBm) and they're not underflowing. Locally tested: * RTL8192CU, STA * RTL8192EU, STA * RTL8188EU, STA Differential Revision: https://reviews.freebsd.org/D47987 Reviewed by: bz, imp |
||
|---|---|---|
| .. | ||
| amd64 | ||
| arm | ||
| arm64 | ||
| bsm | ||
| cam | ||
| cddl | ||
| compat | ||
| conf | ||
| contrib | ||
| crypto | ||
| ddb | ||
| dev | ||
| dts | ||
| fs | ||
| gdb | ||
| geom | ||
| gnu | ||
| i386 | ||
| isa | ||
| kern | ||
| kgssapi | ||
| libkern | ||
| modules | ||
| net | ||
| net80211 | ||
| netgraph | ||
| netinet | ||
| netinet6 | ||
| netipsec | ||
| netlink | ||
| netpfil | ||
| netsmb | ||
| nfs | ||
| nfsclient | ||
| nfsserver | ||
| nlm | ||
| ofed | ||
| opencrypto | ||
| powerpc | ||
| riscv | ||
| rpc | ||
| security | ||
| sys | ||
| teken | ||
| tests | ||
| tools | ||
| ufs | ||
| vm | ||
| x86 | ||
| xdr | ||
| xen | ||
| Makefile | ||
| README.md | ||
FreeBSD Kernel Source:
This directory contains the source files and build glue that make up the FreeBSD kernel and its modules, including both original and contributed software.
Kernel configuration files are located in the conf/ subdirectory of each
architecture. GENERIC is the configuration used in release builds. NOTES
contains documentation of all possible entries. LINT is a compile-only
configuration used to maximize build coverage and detect regressions.
Documentation:
Source code documentation is maintained in a set of man pages, under section 9.
These pages are located in share/man/man9, from the
top-level of the src tree. Consult intro(9)
for an overview of existing pages.
Some additional high-level documentation of the kernel is maintained in the Architecture Handbook.
Source Roadmap:
| Directory | Description |
|---|---|
| amd64 | AMD64 (64-bit x86) architecture support |
| arm | 32-bit ARM architecture support |
| arm64 | 64-bit ARM (AArch64) architecture support |
| cam | Common Access Method storage subsystem - cam(4) and ctl(4) |
| cddl | CDDL-licensed optional sources such as DTrace |
| conf | kernel build glue |
| compat | Linux compatibility layer, FreeBSD 32-bit compatibility |
| contrib | 3rd-party imported software such as OpenZFS |
| crypto | crypto drivers |
| ddb | interactive kernel debugger - ddb(4) |
| fs | most filesystems, excluding UFS, NFS, and ZFS |
| dev | device drivers and other arch independent code |
| gdb | kernel remote GDB stub - gdb(4) |
| geom | GEOM framework - geom(4) |
| i386 | i386 (32-bit x86) architecture support |
| kern | main part of the kernel |
| libkern | libc-like and other support functions for kernel use |
| modules | kernel module infrastructure |
| net | core networking code |
| net80211 | wireless networking (IEEE 802.11) - net80211(4) |
| netgraph | graph-based networking subsystem - netgraph(4) |
| netinet | IPv4 protocol implementation - inet(4) |
| netinet6 | IPv6 protocol implementation - inet6(4) |
| netipsec | IPsec protocol implementation - ipsec(4) |
| netpfil | packet filters - ipfw(4), pf(4), and ipfilter(4) |
| opencrypto | OpenCrypto framework - crypto(7) |
| powerpc | PowerPC/POWER (32 and 64-bit) architecture support |
| riscv | 64-bit RISC-V architecture support |
| security | security facilities - audit(4) and mac(4) |
| sys | kernel headers |
| tests | kernel unit tests |
| ufs | Unix File System - ffs(4) |
| vm | virtual memory system |
| x86 | code shared by AMD64 and i386 architectures |