Ian Lepore a9d84a2ba7 Add ioctl(2) calls to uftdi(4) to access bitbang, MPSSE, CPU_FIFO, and ... other modes supported by the FTDI serial adapter chips. In addition to adding the new ioctls, this change removes all the code that reset the chip at attach and open/close time, and also the code that turned on RTS/CTS flow control on open without any permission to do so (that was just always a bug in the driver). When FTDI chips are configured as GPIO or MPSSE or other special-purpose uses by an attached serial eeprom, the chip will power on with certain pins driven or floating, and it's important that the driver not do anything to the chip to perturb that unless it receives a specific command to do so. When used for "plain old serial comms" the chip powers on into the right mode and never needs to be reset while it's running to operate properly, so this change is transparent to most users.		2014-04-05 16:08:13 +00:00
..
controller	Add device and gadget bindings for fdt. These are preliminary and will	2014-02-28 03:00:31 +00:00
gadget
input	Fix spelling.	2014-03-17 07:19:19 +00:00
misc
net	Correct endianness handling in getting station address from EEPROM.	2014-04-03 01:32:43 +00:00
quirk	Add new quirk.	2014-03-04 12:33:18 +00:00
serial	Add ioctl(2) calls to uftdi(4) to access bitbang, MPSSE, CPU_FIFO, and	2014-04-05 16:08:13 +00:00
storage
template	USB method structures for USB controllers and USB pipes should be	2013-12-11 13:20:32 +00:00
wlan	Add new USB ID.	2014-04-01 10:34:39 +00:00
ufm_ioctl.h
uftdiio.h	Add ioctl(2) calls to uftdi(4) to access bitbang, MPSSE, CPU_FIFO, and	2014-04-05 16:08:13 +00:00
usb.h	Import USB RNDIS driver to FreeBSD from OpenBSD.	2014-02-06 08:47:14 +00:00
usb_bus.h	USB method structures for USB controllers and USB pipes should be	2013-12-11 13:20:32 +00:00
usb_busdma.c	Fix a regression issue. Contiguous single segment allocations above	2014-02-05 08:02:52 +00:00
usb_busdma.h
usb_cdc.h
usb_compat_linux.c
usb_compat_linux.h
usb_controller.h	Improve the XHCI command timeout recovery handling code.	2013-12-06 08:42:41 +00:00
usb_core.c
usb_core.h	Workaround for USB MIDI adapters which use non-supported values of	2014-03-14 08:42:30 +00:00
usb_debug.c
usb_debug.h
usb_dev.c	Try to resolve a possible deadlock when detaching USB devices which	2014-03-20 13:53:24 +00:00
usb_dev.h
usb_device.c	Try to resolve a possible deadlock when detaching USB devices which	2014-03-20 13:53:24 +00:00
usb_device.h	Implement better error recovery for Transaction Translators, TTs,	2014-01-13 15:21:11 +00:00
usb_dynamic.c
usb_dynamic.h
usb_endian.h
usb_error.c
usb_freebsd.h	We are using the old callout API and should also add one extra tick in	2014-01-22 17:50:43 +00:00
usb_freebsd_loader.h	Ensure that the DMA delay does not get rounded down to zero ticks when	2014-01-22 07:48:39 +00:00
usb_generic.c
usb_generic.h
usb_handle_request.c
usb_hid.c
usb_hub.c	Fix the ordering of the arguments to printf in	2014-01-29 16:24:50 +00:00
usb_hub.h	Implement better error recovery for Transaction Translators, TTs,	2014-01-13 15:21:11 +00:00
usb_if.m
usb_ioctl.h
usb_lookup.c
usb_mbuf.c
usb_mbuf.h
usb_msctest.c
usb_msctest.h
usb_parse.c
usb_pci.h
usb_pf.c
usb_pf.h
usb_process.c	Try to resolve a possible deadlock when detaching USB devices which	2014-03-20 13:53:24 +00:00
usb_process.h	Try to resolve a possible deadlock when detaching USB devices which	2014-03-20 13:53:24 +00:00
usb_request.c	Implement better error recovery for Transaction Translators, TTs,	2014-01-13 15:21:11 +00:00
usb_request.h
usb_transfer.c	Workaround for USB MIDI adapters which use non-supported values of	2014-03-14 08:42:30 +00:00
usb_transfer.h
usb_util.c
usb_util.h
usbdevs	Add the Dresden Elektronik "USB Levelshifter Stick Low Cost" to the	2014-04-03 20:00:02 +00:00
usbdi.h	Workaround for USB MIDI adapters which use non-supported values of	2014-03-14 08:42:30 +00:00
usbdi_util.h
usbhid.h