Bill Paul 0434d1b8d2 Add support for the BCM5705 and its ilk. Changes: ... - 5705 doesn't support jumbo frames - Statistics must be read from registers - RX return ring must be capped at 512 entries - Omit initialization of certain device blocks - Acknowledge link change interrupts by setting the 'link changed' bit in the status register (used to have no effect) - Remember to toggle the MI completion bit too - Set the mbuf low watermark differently (on-chip memory buffers, not BSD mbufs) - Don't enable Ethernet@WireSpeed feature for certain 5705 chip revs - Add additional PCI IDs for 5705 and 5782 parts - Add a forgotten 5704 PCI ID Most changes ripped kicking and screaming from the Broadcom linux driver. Thanks to Paul Saab for sanity testing. (My lack of sanity has been confirmed.)		2003-07-16 00:09:56 +00:00
..
acphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
acphyreg.h
amphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
amphyreg.h
bmtphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
bmtphyreg.h
brgphy.c	Add support for the BCM5705 and its ilk. Changes:	2003-07-16 00:09:56 +00:00
brgphyreg.h	Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped.	2003-06-17 15:02:28 +00:00
dcphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
e1000phy.c	Remove miidevs.h and generate it from miidevs at compile time.	2003-01-19 02:59:34 +00:00
e1000phyreg.h
exphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
inphy.c	Remove unused variable and code.	2003-02-19 00:32:01 +00:00
inphyreg.h
lxtphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
lxtphyreg.h
mii.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
mii.h
mii_physubr.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
miibus_if.m
miidevs	Add support for the BCM5705 and its ilk. Changes:	2003-07-16 00:09:56 +00:00
miivar.h
mlphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
nsgphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
nsgphyreg.h
nsphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
nsphyreg.h
pnaphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
pnphy.c	Remove unnecessary breaks.	2003-05-31 19:48:33 +00:00
qsphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
qsphyreg.h
rlphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
ruephy.c	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
ruephyreg.h	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
tdkphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
tdkphyreg.h
tlphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
tlphyreg.h
ukphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
ukphy_subr.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
xmphy.c	Use __FBSDID rather than rcsid[].	2003-04-03 21:36:33 +00:00
xmphyreg.h