From Jake:
When updating the device statistics, report whether or not we have
received any pause frames to the iflib stack. This allows the iflib
stack to avoid generating a Tx hang message while the device is paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21870
From Jake:
Notify the iflib stack of whether we received any pause frames during
the timer window. This allows the stack to avoid reporting a Tx hang due
to the device being paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21869
From Jake:
The e1000 driver sets the iflib shared context isc_pause_frames value to
the number of received xoff frames. This is done so that the iflib
watchdog timer won't trigger a Tx Hang due to pause frames.
Unfortunately, the function simply sets it to the value of the xoffrxc
counter. Once the device has received a single XOFF packet, the driver
always reports that we received pause frames. This will prevent the Tx
hang detection entirely from that point on.
Fix this by assigning isc_pause_frames to a non-zero value if we
received any XOFF packets in the last timer interval.
We could attempt to calculate the total number of received packets by
doing a subtraction, but the iflib stack only seems to check if
isc_pause_frames is non-zero.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21868
the slot is flagged as 'embedded'.
The features related to embedded and shared slots were added in v3.0 of
the sdhci spec. Hardware prior to v3 sometimes supported 1.8v on non-
removable devices in embedded systems, but had no way to indicate that
via the standard sdhci registers (instead they use out of band metadata
such as FDT data).
This change adds the controller specification version to the check for
whether to filter out the 1.8v selection. On older hardware, the 1.8v
option is allowed to remain. On 3.0 or later it still requires the
embedded-slot flag to remain.
This is part of the fix for PR 241301 (eMMC not detected on Beaglebone).
Changes to the sdhci_ti driver are also needed for a full fix.
PR: 241301
This allows to remove a bunch of low level code.
Also, superio(4) provides safer interaction with other drivers
that work with Super I/O configuration registers.
Tested only on PCengines APU2:
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
wbwd0: <Nuvoton NCT6102 (0xc4/0x53) Watchdog Timer> at WDT ldn 0x08 on superio0
The watchdog output is incorrectly wired on that system and the watchdog
does not really do it its job, but the pulse can be seen with a signal
analyzer.
Reviewed by: delphij, bcr (man page)
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21979
This is where it logically belongs.
The change allows to drop a bunch of low lewel code.
Reviewed by: gonzo
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21980
From Zach:
Intel documentation indicates that backplane X550EM_X KR devices do not
support Energy Efficient Ethernet. Prior to this patch, X552 devices
(device ID 0x15AB) will crash the system when transitioning EEE state
via sysctl.
Signed-off-by: Zach Vargas <zvargas@xes-inc.com>
PR: 240320
Submitted by: Zach Vargas <zvargas@xes-inc.com>
Reviewed by: erj@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21673
Rescan a PCI bus when the ACPI_NOTIFY_BUS_CHECK event is posted to a
PCI bus.
Reviewed by: scottl
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21948
Install ACPI notify handlers on PCI devices with an _EJ0 method. This
handler is invoked when devices are added or removed.
- When an ACPI_NOTIFY_DEVICE_CHECK event posts, rescan the parent bus
device. Note that strictly speaking we only need to rescan the
specified device, but BUS_RESCAN is what is available, so we rescan
the entire bus.
- When an ACPI_NOTIFY_EJECT_REQUEST event posts, detach the device
associated with the ACPI handle, invoke the _EJ0 method, and then
delete the device.
Eventually this might be changed to vector notify events to devd in
userspace where devctl can be used instead to permit more complex
actions such as graceful unmounting of filesystems.
Tested by: cperciva
Reviewed by: cperciva, imp, scottl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21948
Ignore only ENOENT (no DTS properties found) and ENODEV (driver not
present) non-zero return values from ext_resources.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22043
Atomics are used for page busy and valid state when the shared busy is
held. The details of the locking protocol and valid and dirty
synchronization are in the updated vm_page.h comments.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21594
This is the first in a series of patches that promotes the page busy field
to a first class lock that no longer requires the object lock for
consistency.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21548
(resets, regulators, clocks) are not available.
Rely on a system initialization done by a bootloader in that cases.
This fixes operation on Terasic DE10-Pro (an Intel Stratix 10
development kit).
Sponsored by: DARPA, AFRL
Refactor nvdimm_spa_memattr() routine and callers to just save the value at
initialization and use the value directly. The reference value from NFIT,
MemoryMapping, is read only once, so the associated memattr could never
change.
No functional change.
Sponsored by: Dell EMC Isilon
starting at the max. domain, and then work down. Then existing FreeBSD
drivers will attach. Interrupt routing from the VMD MSI-X to the NVME
drive is not well known, so any interrupt is sent to all children that
register.
VROC used Intel meta data so graid(8) works with it. However, graid(8)
supports RAID 0,1,10 for read and write. I have some early code to
support writes with RAID 5. Note that RAID 5 can have life issues
with SSDs since it can cause write amplification from updating the parity
data.
Hot plug support needs a change to skip the following check to work:
if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) {
in sys/dev/pci/pci_pci.c.
Looked at by: imp, rpokala, bcr
Differential Revision: https://reviews.freebsd.org/D21383
This ensures the clip task won't race with t4_destroy_clip_table.
While here, make some mutex destroys unconditional since attach always
initializes them.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21952
If the bootloader enabled DMA we need to fully reset the DMA controller
otherwise we might have some stale data in it that provoke weird
behavior.
MFC after: 1 week
This adds a TOE hook to allocate a KTLS session. It also recognizes
TLS mbufs in the socket buffer and sends those to the NIC using a TLS
work request to encrypt the record before segmenting it.
TOE TLS support must be enabled via the dev.t6nex.<N>.tls sysctl in
addition to enabling KTLS.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
The PCI block in the adapter requires this field to be set to a valid
queue ID. It is not clear why it did not fail on all machines, but
the effect was that crypto operations reading input data via DMA
failed with an internal PCI read error on machines with 128G or more
of RAM.
Reported by: gallatin
Reviewed by: np
MFC after: 3 days
Sponsored by: Chelsio Communications
As noted by the commit message, callouts are now persistant
and should not be in the auto-zero section of the RQ's and SQ's.
This fixes an assert when using the TX completion event
factor feature with mlx5en(4).
Found by: gallatin@
MFC after: 3 days
Sponsored by: Mellanox Technologies
In case the implementation ever changes from using a chain of next pointers,
then changing the macro definition will be necessary, but changing all the
files that iterate over vm_map entries will not.
Drop a counter in vm_object.c that would have an effect only if the
vm_map entry count was wrong.
Discussed with: alc
Reviewed by: markj
Tested by: pho (earlier version)
Differential Revision: https://reviews.freebsd.org/D21882
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
