Add -j <jail> flag to netstat(1) to allow access to network information
from a jail.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41446
The network and address fields were sometimes truncated for netstat -i
without -W, and often much too wide for netstat -i with the -W option.
Fields such as normal packet counts often overflowed. As a result,
columns didn't line up, and large white spaces made it harder to
follow a line across the display. Change the code to compute the
required field sizes for network, address, and various packet counts.
Hoist the code to format network and address into a subroutine that
can be called twice, once to measure the required field widths,
and once to emit the values. Use separate field widths for input
and output packets, byte counts, and error and drop counters.
These are left at defaults (the preceding values) with the -h
option, in which case the fields have a limited total width.
An extra space is included between the Network and Address, which
otherwise seemed too close.
Change the mention of -W with -i in the man page to say that most
field widths are computed dynamically in this case.
MFC after: 1 week
Reviewed by: sjg, glebius
Differential Revision: https://reviews.freebsd.org/D41160
netstat(1) allows to specify both -i (all interfaces) and -I <ifname>.
However, when both are specified, -I always overrides -i.
Add a comment where appropriate the same way we do in rm(1) for -f and -i.
PR: 202708
Reported by: demon@
Approved by: manpages (pauamma@)
Differential Revision: https://reviews.freebsd.org/D38654
trpt(8) was utility to pull TCP debugging data from the kernel
originating back from 4.2BSD. It is not used nowadays by TCP
developers. We have more powerful debugging facilities, e.g.
the Dtrace probing, the TCP black box logging and siftr.
Discussed with: rscheff, tuexen, rrs, jtl and others
The field for interface names for netstat -i was 5 characters by
default, which is no longer sufficient with names like "vlan1234"
and "vtnet0". netstat -iW computed the necessary field width, but
also enlarged the address field by a lot (especially with IPv6 enabled).
Make netstat -i compute the field width for interface names with or
without -W. Note that the existing default output does not fit in
80 columns in any case. Update the man page accordingly, documenting
the remaining effect of -W with -i. Also add -W to the list of
General Options, as there are numerous pointers to this.
Reported by: Chris Ross
Reviewed by: melifaro, rgrimes, cy
Differential Revision: https://reviews.freebsd.org/D35703
MFC after: 1 week
With M_EXTPG mbufs these two counters already do not represent the
reality. As we are moving towards protocol independent socket buffers,
which may not even use mbufs at all, the counters become less and less
relevant. The only userland seeing them was 'netstat -x'.
PR: 264181 (exp-run)
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35334
Adding the "-c" option used to show detailed per-connection
congestion control state for TCP sessions.
This is one summary patch, which adds the relevant variables into
xtcpcb. As previous "spare" space is used, these changes are ABI
compatible.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26518
summits at BSDCan and BSDCam in 2017.
The TCP Blackbox Recorder allows you to capture events on a TCP connection
in a ring buffer. It stores metadata with the event. It optionally stores
the TCP header associated with an event (if the event is associated with a
packet) and also optionally stores information on the sockets.
It supports setting a log ID on a TCP connection and using this to correlate
multiple connections that share a common log ID.
You can log connections in different modes. If you are doing a coordinated
test with a particular connection, you may tell the system to put it in
mode 4 (continuous dump). Or, if you just want to monitor for errors, you
can put it in mode 1 (ring buffer) and dump all the ring buffers associated
with the connection ID when we receive an error signal for that connection
ID. You can set a default mode that will be applied to a particular ratio
of incoming connections. You can also manually set a mode using a socket
option.
This commit includes only basic probes. rrs@ has added quite an abundance
of probes in his TCP development work. He plans to commit those soon.
There are user-space programs which we plan to commit as ports. These read
the data from the log device and output pcapng files, and then let you
analyze the data (and metadata) in the pcapng files.
Reviewed by: gnn (previous version)
Obtained from: Netflix, Inc.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11085
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
in 'netstat -r'.
The netstat/route.c was the last abuser of struct ifnet and struct
rtentry in the tree. With this change if_var.h can become kernel
only include, _WANT_RTENTRY can go away and projects/ifnet and
projects/routing can go forward.
Differential Revision: https://reviews.freebsd.org/D2242
Reviewed by: melifaro, gnn
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
contain kernel pointers, and instead has interface index.
Bump __FreeBSD_version for that change.
o Now, netstat/mroute6.c no longer needs to kvm_read(3) struct ifnet, and
no longer needs to include if_var.h
Note that this change is far from being a complete move of IPv6 multicast
routing to a proper API. Other structures are still dumped into their
sysctls as is, requiring userland application to #define _KERNEL when
including ip6_mroute.h and then call kvm_read(3) to gather all bits and
pieces. But fixing this is out of scope of the opaque ifnet project.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
- Reformat the entire man page
- Create a proper synopsis section
- Use itemized-lists to describe each flag, rather than paragraphs
- Cross-reference common flags to a 'general flags' sub-section with short
inline description of the flag
- Label 'general flags' sub-section
- Apply additional fixes suggested by wblock, brueffer, and bdrewery
- Update .Dd that got undone previously
- Change the order of the .Op Fl to be alphabetical
- Add the -i | -I interface flags to the description of 'interface
display mode'
- Fix missing parameters in man page
- Fix missing parameters in usage()
- Sync man page and usage()
MFC Note: stable/9 and stable/10 do not have -R, will need to be removed
when merged
CR: D58
Reviewed by: brueffer, bcr
Approved by: wblock (mentor)
MFC after: 7 days
Sponsored by: ScaleEngine Inc.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
is in accordance with the information provided at
ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change
Also add $FreeBSD$ to a few files to keep svn happy.
Discussed with: imp, rwatson
Retransmitted Packets
Zero Window Advertisements
Out of Order Receives
These statistics are available via the -T argument to
netstat(1).
MFC after: 2 weeks
feature when you have a seemingly stuck socket and want to figure
out why it has not been closed yet.
No plans to MFC this, as it changes the netstat sysctl ABI.
Reviewed by: andre, rwatson, Eric Van Gyzen
Add necessary changes to the kernel for this (basically introduce a
bpf_zero_counters() function). As well, update the man page.
MFC after: 1 month
Discussed with: rwatson
(all types) used per socket buffer.
Add support to netstat to print out all of the socket buffer
statistics.
Update the netstat manual page to describe the new -x flag
which gives the extended output.
Reviewed by: rwatson, julian
