This only supports the legacy virtqueue format that is now called
"Split Virtqueues". Support for the new "Packed Virtqueues" described
in v1.1 is left for a later date.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27857
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
And subsequent fix 576b099a.
By adding the mergable header to the vtnet_rx_header structure, the size
was increased by 2 bytes, breaking the alignment of this structure as
described the in preceding comments.
Furthermore, the mergable header does not belong the structure. With the
mergable feature, the header is placed in line with the data, so there is
no need for a separate segment, and misleading to follow the mergable
header with any padding.
The V1 header is effectively identical to mergable header, and the driver
has long supported the mergable feature. Revert this so the later changes
that add V1 support can show how V1 is derived from the existing mergable
buffers support, and to facilitate a later MFC.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27855
The context record contains key material precomputed by the driver at
session creation time. Rather than storing various components of the
context record in each session, go a bit further and store the full
context record image so that safexcel_process() can simply copy the
image into each request submitted to the hardware. This simplifies the
data path and eliminates a bunch of unnecessary conditional logic that
was getting executed for each request.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Rather than preallocating a set of requests and moving them between
queues during state transitions, maintain a shadow of the command
descriptor ring to track the driver context of each request. This is
simpler and requires less synchronization between safexcel_process() and
the ring interrupt handler.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Rather than returning a hard error in this case, return ERESTART so that
upper layers get a chance to retry the request (or drop it, depending on
the desired policy).
This case is hard to hit due to the somewhat low bound on queued
requests, but that will no longer be true after an upcoming change.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
This gives better performance in some tests than the previous policy of
statically binding each session to a ring.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
AMD 10GbE hardware is designed to have two buffers per receive descriptor to
support split header feature. For this purpose, the driver was designed to use
2 iflib freelists per receive queue. So, that buffers from 2 freelists are used
to refill an entry in the receive descriptor. The current design holds good
with regular data traffic.
But, when netmap comes into play, the current design will not fit in. The
current netmap interfaces and netmap implementation in iflib doesn't seem
to accomodate the design of 2 freelists per receive queue. So, exercising
Netmap capability with inbuilt tools like bridge, pkt-gen doesn't work with
the 2 freelists driver design.
So, the driver design is changed to accomodate the current netmap interfaces
and netmap implementation in iflib by using single freelist per receive queue
approach when Netmap capability is exercised without disturbing the current
2 freelists approach.
The dev.ax.sph_enable tunable can be set to 0 to configure the single
free list mode.
Thanks to Stephan Dewt for his Initial set of code changes for the stated
problem.
Submitted by: rajesh1.kumar_amd.com
Approved by: vmaffione
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27797
Print warning when we can't parse a console specification (this may
not appear on the console, but will appear in dmesg).
Also, accept key:value and key=value. There's no reason not to
and it makes this more forgiving of mistakes.
Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D28168
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
OpenBSD never accepted this driver, and instead wrote their
own minimal one (sys/dev/acpi/tpm.c for suspending the device).
Reviewed by: stevek, emaste
Differential Revision: D10321
This driver supports some arm and arm64 boards equipped with
"snps,dw-wdt"-compatible watchdog device.
Tested on RK3399-based board (RockPro64).
Once started watchdog device cannot be stopped.
Interrupt handler has mode to kick watchdog even when software does not do it
properly.
This can be controlled via sysctl: dev.dwwdt.prevent_restart.
Also - driver handles system shutdown and prevents from restart when system
is asked to reboot.
Submitted by: kjopek@gmail.com
Differential Revision: https://reviews.freebsd.org/D26761
Only x86 provides optimized implementations via the blake2 module. The
software "reference" implementation is already included in the crypto(4)
module, we can drop the extra MODULE_DEPEND for other platforms.
Without this change, if_wg.ko could not be loaded due to the missing
dependency.
PR: 252156
Reported by: gbe
Sponsored by: The FreeBSD Foundation
When detaching the if_ure(4) driver, the TX active USB transfer array may
point to freed USB transfers. Given that the number of USB transfers is
very low, simply start all transfers every time there is a packet to
keep safe from use-after-free.
PR: 252608
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
-pci_get_class : This function search for a matching pci device based on
the class/subclass and returns a newly created pci_dev.
- pci_{save,restore}_state : This is analogous to ours with the same name
- pci_is_root_bus : Return true if this is the root bus
- pci_get_domain_bus_and_slot : This function search for a matching pci
device based on domain, bus and slot/function concat into a single
unsigned int (devfn) and returns a newly created pci_dev
- pci_bus_{read,write}_config* : Read/Write to the config space.
While here add some helper function to alloc and fill the pci_dev struct.
Reviewed by: hselasky, bz (older version)
Differential Revision: https://reviews.freebsd.org/D27550
pci_find_class_from help finding one or multiple device matching
a class and subclass.
If the from argument is not null we will first loop in the device list
until we find the matching device and only then start to check if the
class/subclass matches.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D27549
The cgem(4) driver was updated to support 64-bit bus addressing in
facdd1cd20. However, the committed version determines this in an
un-idiomatic way. Change the compile-time conditional to check
BUS_SPACE_MAXADDR, rather than comparing int and pointer sizes.
Reported by: jrtc27
Use an interface compatible with the Linux one so that the user-space
libraries already using the Linux interface can be used without much
modifications.
This allows an open privcmd instance to limit against which domains it
can act upon.
Sponsored by: Citrix Systems R&D
Use an interface compatible with the Linux one so that the user-space
libraries already using the Linux interface can be used without much
modifications.
This allows user-space to make use of the dm_op family of hypercalls,
which are used by device models.
Sponsored by: Citrix Systems R&D
The interface is mostly the same as the Linux ioctl, so that we don't
need to modify the user-space libraries that make use of it.
The ioctl is just a proxy for the XENMEM_acquire_resource hypercall.
Sponsored by: Citrix Systems R&D
Restore the hwofs functionality temporarily disabled by
7ba6ecf216 to prevent issues with iflib.
This patch brings the necessary changes to iflib to
enable howfs to allow interface restarts without
disrupting netmap applications actively using its
rings.
After this change, it becomes possible for multiple
non-cooperating netmap applications to use non-overlapping
subsets of the available netmap rings without clashing
with each other.
PR: 252453
MFC after: 1 week
Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.
Reviewed by: philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
