in errno) - Found by Weongyo Jeong
- Remove two extra un-needed memset() after calloc()'s - Found by
Weongyo Jeong
- Tightened up parameter requirement checking on input to
bindx/connectx per socket api spec.
Approved by: re@freebsd.org(Ken Smith)
- Fix a memory leak when a non v4/v6 address was passed in.
- Take out strange line that copy's back to the src array
incorrectly (corrupting the input array).
Approved by: re(bmah@freebsd.org)
Obtained from: Weongyo Jeong(weongyo.jeong@gmail.com)
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
net: endhostdnsent is named _endhostdnsent and is
private to netdb family of functions.
posix1e: acl_size.c has been never compiled in,
so there's no "acl_size".
rpc: "getnetid" is a static function.
stdtime: "gtime" is #ifdef'ed out in the source.
some symbols are specific only to some architectures,
e.g., ___tls_get_addr is only defined on i386.
__htonl, __htons, __ntohl and __ntohs are no longer
functions, they are now (internal) defines in
<machine/endian.h>.
Submitted by: ru
passed storage buffers rather than using static storage. Reimplement
ether_ntoa() and ether_aton() in terms of these functions. These variants
are thread-safe.
1. CMSG_NXTHDR(mhdr, cmsg) is supposed to dereference cmsg and return
the next header in the chain. If cmsg is NULL it should return
the first header, behaving essentially like CMSG_FIRSTHDR().
2. inet6_rth_(space|init|add) should do basic checking on their input
to verify that the number of headers (segments) is
between 0 and 127 inclusive.
MFC-After: 1 month
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
in FreeBSD, and originated from INRIA IPv6.
Stub out netstat reference to addr2ascii() I mistakenly introduced.
Update misleading man page sections.
Merge NetBSD's getnameinfo() AF_LINK extensions for a portable way to
print link-layer addresses given a sockaddr_dl(), minus the IEEE 1394
bits which don't map directly to our code.
Obtained from: NetBSD (getnameinfo.c)
Discussed on: current (March 2006)
called with only one address, we then can call the
generic system call. Also fixes some socket api
type issues and cleans up the "magic" numbers that
were being used in the code.
Reviewed by: gnn
Point out that FreeBSD libc has compat stubs for GNU glibc NSS
modules which access NSDB_PASSWD/NSDB_GROUP, but not NSDB_HOSTS;
based on painful experience porting nss_mdns.
Reviewed by: ru
h_errno is not an extern int, just a macro providing an integer lvalue.
PR: doc/50573
Submitted by: Ronald F.Guilmette <rfg@monkeys.com>
Reviewed by: trhodes
MFC after: 3 days
uses them.
Now, we have res_nupdate and res_nmkupdate as well, but they are
still based on our old resolver for binary backward compatibility.
So, they don't provide new features such as TSIG support.
Reported by: pointyhat via kris
Since, res_sendsigned(3) and the friends use MD5 functions, it is
hard to include them without having MD5 functions in libc. So,
res_sendsigned(3) is not merged into libc.
Since, res_update(3) in BIND9 is not binary compatible with our
res_update(3), res_update(3) is leaved as is, except some
necessary modifications.
The res_update(3) and the friends are not essential part of the
resolver. They are not defined in resolv.h but defined in
res_update.h separately in BIND9. Further, they are not called from
our tree. So, I hide them from our resolv.h, but leave them only
for binary backward compatibility (perhaps, no one calls them).
Since, struct __res_state_ext is not exposed in BIND9, I hide it
from our resolv.h. And, global variable _res_ext is removed. It
breaks binary backward compatibility. But, since it is not used from
outside of our libc, I think it is safe.
Reviewed by: arch@ (no objection)
Staticize two tables thare are not visible in <resolv.h>
and which are also local in Solaris' libresolv.
Remove two functions that are not referenced in libc nor
anywhere else I can find, not visible in <resolv.h> and
which are also local in Solaris libresolv.
define also, but res_config.h was not included into libc/net/name6.c.
So getipnodebyaddr() ignored the multiple PTRs.
PR: kern/88241
Submitted by: Dan Lukes <dan__at__obluda.cz>
MFC after: 3 days
method of executing commands remotely. There are no rexec clients in
the FreeBSD tree, and the client function rexec(3) is present only in
libcompat. It has been documented as "obsolete" since 4.3BSD, and its
use has been discouraged in the man page for over 10 years.
netent.
- Change 1st argument of getnetbyaddr() to an uint32_t on 64 bit
arch as well to confirm to POSIX-2001.
These changes break ABI compatibility on 64 bit arch.
There is similar padding issue for ai_addrlen of struct addrinfo.
However, it is leaved as is for now.
Discussed on: arch@, standards@ and current@
X-MFC after: never
RFC 2553. In XNS5.2, and subsequently in POSIX-2001 and RFC
3493, it was changed to a socklen_t. And, the n_net of a
struct netent used to be an unsigned long integer. In XNS5,
and subsequently in POSIX-2001, it was changed to an uint32_t.
To accomodate for this while preserving ABI compatibility with
the old interface, we need to prepend or append 32 bits of
padding, depending on the (LP64) architecture's endianness.
- Correct 1st argument of getnetbyaddr() to uint32_t on 32
bit arch. Stay as is on 64 bit arch for ABI backward
compatibility for now.
Reviewed by: das, peter
MFC after: 2 weeks
Reviewed by: rwatson at freebsd dot org
Approved by: rwatson at freebsd dot org
MFC after: 1 week
Fix the matchlen() function so that it handles the IPv4 (AF_INET)
case correctly. Until now it has been treating IPv4 addresses
as if they were IPv6 which could lead to corruption errors.
any query.
- don't query against IPv6 link-local address.
- use IN6_IS_ADDR_V4{MAPPED,COMPAT} macros.
- use memcpy() instead of bcopy().
Inspired by: NetBSD
getnameinfo(3). POSIX standard does not require a sa_len field
in sockaddr struct, hence such requirement will cause problem
for portability.
PR: standards/80008
Requested by: Xin Liu <lx@knight.6test.edu.cn>
Reviewed by: freebsd-standards (das)
MFC After: 2 weeks
FreeBSD currently implements the most up to date IPv6 APIs for
option and route header parsing. This checkin marks the older APIs
as deprecated and points the reader to the newer pages.
Reviewed by: Jun-ichiro Itojun
Approved by: rwatson (mentor)
Reviewed by: Kame Project (including Itojun-san, Jinmei-san and Suzuki-san)
Approved by: Robert Watson (robert at freebsd dot org)
Obtained from: Kame Project and OpenBSD
Replace manual pages that may have violated the IETF's Copyright.
All come from the Kame tree.
Several were from OpenBSD except for ip6.4, and the inet6* pages which were
rewritten by me.
All of the text is new and drawn from reading the code and
documentation.
Approved by: Robert Watson (robert at freebsd dot org)
Remove files in preparation for replacement with totally new versions
of the manual pages.
Update the Makefile to handle the new file to be added.
which doesn't end in \n, since it may be very confusing. Also this should
increase consistency, since most other config files work just fine regardless
of the presence of traling \n in the last line.
MFC After: 2 weeks
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
Requested by: bde
o Remove unneeded sys/types.h and netinet/in.h from the synopsis and
the example.
o We do have struct in_addr in arpa/inet.h, so no need for netinet/in.h.
o Mention where AF_* constants defined are.
Educated by: bde
This is a corresponding change to bin/67994. I'll soon commit
bin/67994 into 4-STABLE. Actually, 5-CURRENT's getaddrinfo()
doesn't have the problem mentiond in bin/67994. However, it is
good to be in sync variable name with 4-STABLE and KAME.
PR: bin/67994
Submitted by: JINMEI Tatuya <jinmei@ocean.jinmei.org>
res_search only incremented got_servfail for h_errno == TRY_AGAIN *AND*
hp->rcode == SERVFAIL. However, there are cases such as timeouts where
rcode is not always set to SERVFAIL. This leads to inconsistent nameserver
operation during multi-domain and truncated dot searches, especially during
booting when portions of the network are being brought up simultanious with
dns lookups.
This patch attempts to correct the problem by unconditionally terminating
the search if TRY_AGAIN is returned (after res_query has gone through all
retries and name servers) instead of trying other domain elements in the
domain seach path.
This patch should fix reported problems (which I can reproduce) with some
NFS mounts failing during boot. This occured because mount_nfs thought the
host name lookup returned a definitive failure using a non-dotted host name
when, in fact, it timed out on the first part (host.search.domain.name) and
got a definitive host-not-found response on the second part (host.).
Generally speaking, search path name server timeouts can exceed 60 seconds
per element and most machines which consistently timeout on earlier portions
of a search path are effectively non-operational due to the imposed delays.
It is more important for DNS lookups to return the proper error code then
to be able to recover a valid lookup in later portions of the search path
in these situations.
Obtained from: DragonFly
MFC after: 3 weeks
on temporary nameserver failure. This is necessary to get
getipnodebyname(3) to correctly return h_errno=TRY_AGAIN instead
of HOST_NOT_FOUND.
Reviewed by: green, thomas
MFC after: 1 week
case where an /etc/nsswitch.conf file was present, but could not
be opened (e.g. due to permissions). Previously, the open failure
condition was suppressed, and the built-in defaults were used. In
revision 1.11, however, propagated the open failure causing all
nsdispatch() invocations to return NS_UNAVAIL, and thus many APIs
including getpwnam and gethostbyname unconditionally failed.
This commit restores the previous behavior.
Pointy hat: nectar (+1 for obstinance; ache had to use clue bat)
Reported by: ache
library, it may pull in that thread library at run time. If the
process started out single-threaded, this could cause attempts to
release locks that do not exist. Guard against this possibility by
checking __isthreaded before invoking thread primitives.
A similar problem remains if the process is linked against one thread
library, but the NSS module is linked against another. This can only
be avoided by careful design of the NSS module.
Submitted by: Sean McNeil <sean@mcneil.com> (mostly; bugs are mine)
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
