SDHCI controllers found in the QorIQ SoCs offer improved accuracy of
the clock frequency selection, compared to the SDHCI standard. Frequency
selection is performed using two divider registers, named prescaler and
divisor, according to the following formula:
frequency = base clock / (prescaler * divisor), where prescaler can be
bypassed (set to 1) and divisor permitted to take odd values.
Rather than depend on clock division precalculated by sdhci core, make
use of this property of the divider registers and achieve frequencies
closer to the ones requested.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32706
When performing software reset, this controller does not clear all the
required hw registers. In particular, tuning block is left in enabled
state, inhibiting operation of some eMMC cards. The existing solution
was to disable the ability to call SDHCI_RESET_ALL.
As this issue is now better understood, enable the SDHCI_RESET_ALL flag,
provide a custom reset devmethod and clear selected registers by hand.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32705
Some sdhci controllers require custom software reset logic. Accommodate
this need by introducing a new SDHCI_RESET devmethod. Move the existing
reset logic into sdhci_generic_reset and use it as a default for the
aforementioned method.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differeential revision: https://reviews.freebsd.org/D32704
This is the MVP required to initialise and consume random data from
the QCA PRNG hardware found on the IPQ401x.
Reviewed by: andrew, manu, imp
Differential Revision: https://reviews.freebsd.org/D32723
I made a mistaking in merging the final commits for the devctl changes. This
adds the 'hushed' variable and has the correct dates for the manuals.
Pointy hat to: imp
386BSD provided a MD function sysbeep. This took two arguments (pitch
and period). Pitch was jammed into the PIT's divisor directly (which
means the argument was expected to sound a tone at '1193182 / pitch'
Hz). FreeBSD inherited this interface.
In commit e465985885 (svn 177642, Mar 26 2008), phk changed this
function to take a tone to sound in hz. He converted all in-tree
instances of 1193182 / hz to just hz (and kept the few misguided folks
that passed hz directly unchanged -- this was part of what motivated the
change). He converted the places where we pre-computed the 8254 divisor
from being pitch to 1193182 / pitch (since that converts the divisor to
the frequency and the interfaces that were exposed to userland exposed
it in these units in places, continuing the tradition inherited from SCO
System V/386 Unix in spots).
In 2009, Ed Shouten was contracted by the FreeBSD Foundation to write /
finish newcons. This work was done in perforce and was imported into
subversion in user/ed/newcons in revision 199072
(https://svnweb.freebsd.org/base?view=revision&revision=199072) which
was later imported into FreeBSD by ray@ (Aleksandr Rybalko).
From that earliest import into svn import to this date, we ring the bell
with:
sysbeep(1193182 / VT_BELLPITCH, VT_BELLDURATION);
where VT_BELLPITCH was defined to be 800. This results in a bell
frequency of 1491Hz, more or less today. This is similar to the
frequency that syscons and pcvt used (1493Hz and 1500Hz respectively).
This in turn was inherited from 386BSD, it seems, which used the hard
coded value 0x31b which is 795 -> 1500Hz.
This '800' was intended to be the bell tone (eg 800Hz) and this
interface was one that wasn't converted. The most common terminal prior
to the rise of PCs was the VT100, which had an approximately 800Hz
bell. Ed Shouten has confirmed that the original intent was 800Hz and
changing this was overlooked after the change to -current was made.
This restors that original intent and makes the bell less obnoxious in
the process.
Reviewed by: des, adrian
Differential Revision: https://reviews.freebsd.org/D32594
Sponsored by: Netflix
Generate VT events when the bell beeps. When coupled with disabling the
bell,this allows custom bells to be rung when we'd otherwise beep.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D32656
Add the glue needed to listen to TP_SETBELLPD which teken uses to
inform its client drivers about the results of parsing
\e[=<pitch>;<duration>B. It converts these to a Hz value for the
tone/pitch of the bell and a duration in ms. There's some loss of
precision because <pitch> in the escape seuquence is defined to be
(1193182 / pitch) Hz and <duration> is in 10ms units. Also note that
kbdcontrol also parses 'off' but then doesn't send the proper escape
sequence, leading me to wonder if that's another bug since teken
appears to parse that sequence properly and I've added code here to
treat that as the same as quiet or disabled.
In general, Hz from 100 to 2000 is good. Outside that range is possible,
but even at 100Hz the square wave is starting to sound bad and above
2000Hz the speaker may not respond.
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D32620
Change the 'period' argument to 'duration' and change its type to
sbintime_t so we can more easily express different durations.
Reviewed by: tsoome, glebius
Differential Revision: https://reviews.freebsd.org/D32619
On recent OpenBMC firmware, the onboard ASMEDIA video card framebuffer
address was removed from device tree for security purposes (value is set
to zero to avoid leaking the address).
This patch works around the problem by taking framebuffer base address
from the "ranges" property of a parent node.
Reviewed by: luporl, jhibbits (on IRC)
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30626
Only build on RISC-V for now, since we're not aware of any other cores
with this IP supported by FreeBSD.
Reviewed by: jrtc27, philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32737
The pic_* interface was used.
Only edge interrupts are supported by this controller.
Driver mutex had to be converted to a spin lock so that it can
be used in the interrupt filter context.
Two types of intr_map_data are supported - INTR_MAP_DATA_GPIO and
INTR_MAP_DATA_FDT. This way interrupts can be allocated using the
userspace gpio interrupt allocation method, as well as directly from
simplebus. The latter can be used by devices that have its irq routed
to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32587
Driver polls status of all PHYs connected to the switch in a
fixed interval.
Add a sysctl that allows to control frequency of that.
The value is expressed in ticks and defaults to "hz", or 1 second.
Obtained from: Semihalf
Sponsored by: Alstom Group
It was previously used by felix(4) for PHY communication.
Since that is not the case anymore this driver is now left unused.
Obtained from: Semihalf
Sponsored by: Alstom Group
Previously we would use an external MDIO device found on the PCI bus.
Switch to using MDIO mapped in a separate BAR of the switch device.
It is much easier this way since we don't have to depend on another
driver anymore.
Obtained from: Semihalf
Sponsored by: Alstom Group
Currently, to support 64-byte contexts, xhci_ctx_[gs]et_le(32|64) take a
pointer to the field within a 32-byte context and, if 64-byte contexts
are in use, compute where the 64-byte context field is and use that
instead by deriving a pointer from the 32-byte field pointer. This is
done by exploiting a combination of 64-byte contexts being the same
layout as their 32-byte counterparts, just with 32 bytes of padding at
the end, and that all individual contexts are either in a device
context or an input context which itself is page-aligned. By masking out
the low 4 bits (which is the offset of the field within the 32-byte
contxt) of the offset within the page, the offset of the invididual
context within the containing device/input context can be determined,
which is itself 32 times the number of preceding contexts. Thus, adding
this value to the pointer again gets 64 times the number of preceding
contexts plus the field offset, which gives the offset of the 64-byte
context plus the field offset, which is the address of the field in the
64-byte context.
However, this involves a fair amount of lying to the compiler when
constructing these intermediate pointers, and is rather difficult to
reason about. In particular, this is problematic for CHERI, where we
compile the kernel with subobject bounds enabled; that is, unless
annotated to opt out (e.g. for C struct inheritance reasons where you
need to be able to downcast, or containerof idioms), a pointer to a
member of a struct is a capability whose bounds only cover that field,
and any attempt to dereference outside those bounds will fault,
protecting against intra-object buffer overflows. Thus the pointer given
to xhci_ctx_[gs]et_le(32|64) is a capability whose bounds only cover the
field in the 32-byte context, and computing the pointer to the 64-byte
context field takes the address out of bounds, resulting in a fault when
later dereferenced.
This can be cleaned up by using a different abstraction. Instead of
doing the 32-byte to 64-byte conversion on access to the field, we can
do the conversion when getting a pointer to the context itself, and
define proper 64-byte versions of contexts in order to let the compiler
do all the necessary arithmetic rather than do it manually ourselves.
This provides a cleaner implementation, works for CHERI and may even be
slightly more performant as it avoids the need to mess with masking
pointers (which cannot in the general case be optimised by compilers to
be reused across accesses to different fields within the same context,
since it does not know that the contexts are over-aligned compared with
the C ABI requirements).
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D32554
This brings it inline with what's in openbsd. I tested it locally
with 2G and 5G association; it seems to work.
Tested: Intel 7260 AC, hw 0x140, STA mode, 2G/5G
Differential Revision: https://reviews.freebsd.org/D32627
Subscribers: imp
Obtainde from: OpenBSD
Summary:
This updates the if_iwmreg.h definitions to;
OpenBSD: if_iwmreg.h,v 1.65 2021/10/11 09:03:22 stsp Exp
A few things haven't been fully converted, namely:
* I left a couple things as enums for now just to reduce the
other diffs needed; but they're the same values
* The IWM_SCD_QUEUE_* macros have different offsets which I
didn't update in case they broke things / changed based on later
firmware. But they also may be real bugfixes which are needed
for later chips. It'll need more testing before flipping this on.
The c file updates are:
* Use the newer names for things if the name changed but the semantics
didn't
* Explicitly use the earlier firmware structs which maintain compat
with the current firmware and code. The newer ones are in here and
they'll get converted when more openbsd code is merged into this tree.
* Use the older iwm rate table for now, which has entries for legacy
rates, HT and VHT. Our code works with that right now, updating it
to openbsd's err, "different" version can be done at a later date
when HT/VHT support is added.
Notably, a bunch of definitions were deleted that weren't used.
They're not used either in the openbsd/dfbsd drivers so I think it's
safe to delete them in the long run.
Test Plan: 7260 hw 0x140
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D32627
Reviewed by: md5
Obtained From: OpenBSD
According to 11.4.8 in RFC 7143, ExpDataSN MUST be 0 if the response
code is not Command Completed, but we were requiring it to always be
the count of DataIn PDUs regardless of the response code.
In addition, at least one target (OCI Oracle iSCSI block device)
returns an ExpDataSN of 0 when returning a valid completion with an
error status (Check Condition) in response to a SCSI Inquiry. As a
workaround for this target, only warn without resetting the connection
for a 0 ExpDataSN for responses with a non-zero error status.
PR: 259152
Reported by: dch
Reviewed by: dch, mav, emaste
Fixes: 4f0f5bf995 iscsi: Validate DataSN values in Data-In PDUs in the initiator.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32650
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95c, MFC'd to stable/10 in ba54910169c4). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
-Each CQ start task queue to poll when completion happens.
This means every rx and tx queue has its own cleanup task
thread to poll the completion.
- Arm EQ everytime no matter it is mana or hwc. CQ arming
depends on the budget.
- Fix a warning in mana_poll_tx_cq() when cqe_read is 0.
- Move cqe_poll from EQ to CQ struct.
- Support EQ sharing up to 8 vPorts.
- Ease linkdown message from mana_info to mana_dbg.
Tested by: whu
MFC after: 2 weeks
Sponsored by: Microsoft
netdev_priv() is a LinuxKPI function which was used with the old ifnet
linux/netdevice.h implementation which was not adaptable to modern
Linux drviers unless rewriting them for ifnet in first place which
defeats the purpose.
Rename the netdev_priv() calls in mlx4 to mlx4_netdev_priv()
returning the ifnet softc to avoid conflicting symbol names
with different implementations in the future.
MFC after: 3 days
Reviewed by: hselasky, kib
Differential Revision: https://reviews.freebsd.org/D32640
Previously the MSR-based timecounter was registered during
SI_SUB_HYPERVISOR, i.e., very early during boot, and before SI_SUB_LOCK.
After commit 621fd9dcb2 this triggers a panic since the timecounter
list lock is not yet initialized.
The hyperv timecounter does not need to be registered so early, so defer
that to SI_SUB_DRIVERS, at the same time the hyperv TSC timecounter is
registered.
Reported by: whu
Approved by: whu
Fixes: 621fd9dcb2 ("timecounter: Lock the timecounter list")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When EVDEV_SUPPORT was introduced, the USB transfers may be running
after the main FIFO is closed. In connection to this a race may appear
which can lead to use-after-free scenarios. Fix this for all FIFO
consumers by initializing and resetting the FIFO queues under the
lock used by the client. Then the client driver will see an empty
queue in all cases a race may appear.
Found by: pho@
MFC after: 1 week
Sponsored by: NVIDIA Networking
It seems that clang IAS erronously adds repz prefix which should not be
there. Cpu would try to store around %ecx bytes of random, while we
only expect a word.
PR: 259218
Reported and tested by: Dennis Clarke <dclarke@blastwave.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
Fix clearing of bits in RCTL for the non-bpf/non-allmulti case.
Update RCTL after modifying the multicast filter registers as per
the Linux driver.
This fixes LACP on igc interfaces, where incoming LACP multicasti
control packets were being dropped.
Reviewed by: kbowling
Obtained from: Rubicon Communications, LLC ("Netgate")
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32574
While IEEE80211_R_BAND was defined, there was no place to store the
band. Add a field for that, adjust ieee80211_lookup_channel_rxstatus()
to require it, and update drivers passing "R_{FREQ|IEEE}" in already to
provide the band as well. For the moment keep the fall-back code
requiring all three fields.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D30662
For some of them, used only when KTR or KMSAN are configured, apply
__unused attribute directly.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Devices in sys/dev should be architecture-independent and NOT #include
intr_machdep.h.
Reviewed by: mhorne royger
Differential Revision: https://reviews.freebsd.org/D29959
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
Bell is either useless if you're working on remote servers or really annoying
when you're working with a local machine that have a loud buzzer.
Switch the default to have it disable.
Reviewed by: imp, pstef, tsoome
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32543
The condition added in commit 5bdb8b273a excludes plain SHA
transforms, so for such sessions crypto operations would return
incorrect results.
Fixes: 5bdb8b273a ("safexcel: Maintain per-session context records")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Linux KPIs like pci_resource_start/len assume that BARs have been
allocated, but FreeBSD lazily allocates BARs if it cannot allocate the
firmware-allocated BARs. Thus using the Linux KPIs must force allocation
of the BARs rather than returning 0 for the start and length, which can
crash drm-kmod drivers that assume the BARs are valid. This is needed
for the AMDGPU driver to be able to attach on SiFive's HiFive Unmatched.
Reviewed by: hselasky, jhb, mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32447
Previously the body of ktls_tick was a nop when NIC TLS was disabled,
but the callout was still scheduled consuming power on otherwise-idle
systems with Chelsio T6 adapters. Now the callout only runs while NIC
TLS is enabled on at least one interface of an adapter.
Reported by: mav
Reviewed by: np, mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32491
Reduce traffic to doorbell register when processing multiple completion
events at once. Only write it at the end of the loop after we've
processed everything (assuming we found at least one completion,
even if that completion wasn't valid).
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D32470
