We don't have a separate bss node; instead we dup the first node we saw
and turn that into the BSS node. This means that action frames from
that node would be rejected.
So, check that the node is the bss node /and/ the MAC doesn't match ni_macaddr.
That's the "right" way for now to verify it's an unknown node.
This fixes handling action frames in adhoc mode, which includes negotiating
11n aggregation via ADDBA/DELBA.
This by itself isn't enough to correctly create 11n adhoc networks; but
it is required for aggregation to be negotiated.
Tested:
* AR9380, 11n adhoc mode
* broadcom 11ac adhoc (vendor platform)
Sponsored by: Eva Automation, Inc.
Arguably we should only be doing the probe/attach to children of
these devices as well.
Tested by: Michal Stanek <mst_semihalf.com> (arm64)
Differential Revision: https://reviews.freebsd.org/D6133
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Differential Revision: http://reviews.freebsd.org/D5875
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
Summary:
The Initial Local APIC ID is returned by CPUID function 1 (in EBX).
On AMD Family 10h systems the way that ID is built is controlled by
an MSR bit (InitApicIdCpuIdLo). BKDG instructs BIOS to set it in a
certain way, but a BIOS can be buggy. In that case the ID can confuse
tools that use it, e.g. hwloc.
For example, on a system that I own real Local APIC IDs are configured
as 0, 1, 2, 3, but IDs reported via CPUID.1 are 0, 0x40, 0x80, 0xc0.
See: https://github.com/open-mpi/hwloc/issues/183
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6060
Labels are limitted by 32 on EF10. It is not sufficient on powerful hosts.
Since only one RxQ is running over each EvQ, zero label may be used.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
PR: 208267
Differential Revision: https://reviews.freebsd.org/D6121
In principle n is only used to carry a copy of ipi_count, which is
unsigned, in the non-VIMAGE case, however ipi_count can be used
directly so it is not needed at all. Removing it makes things look
cleaner.
The "len" parameter is uint32_t, indexing it with an int may
end up in a signed integer overflow.
strlen(3) returns an integer of size_t so the corresponding index should
have that size.
MFC after: 1 week
This allows the PCI-PCI bridge driver to save a reference to the child
device in its softc.
Note that this required moving the "pci" device creation out of
acpi_pcib_attach(). Instead, acpi_pcib_attach() is renamed to
acpi_pcib_fetch_prt() as it's sole action now is to fetch the PCI
interrupt routing table.
Differential Revision: https://reviews.freebsd.org/D6021
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
Differential Revision: https://reviews.freebsd.org/D6019
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Differential Revision: https://reviews.freebsd.org/D6016
In struct:gctl_req, nargs is unsigned.
In mirror:
g_mirror_syncreqs is unsigned.
In raid:
in struct:g_raid_volume, v_disks_count is unsigned.
In virstor:
in struct:g_virstor_softc, n_components is unsigned.
MFC after: 2 weeks
This greatly reduces the oqdrops under heavy workload.
For TCP send/recv test (10K concurrent connections):
oqdrops is reduced by 17% on sending side, and 57% on receiving side.
For nginx-1.8/wrk-4 1KB object test (10K concurrent connections,
4 requests/connection):
oqdrops is reduced by 44% on nginx side, and 10% on wrk side.
MFC after: 1 week
Sponsored by: Microsoft OSTC
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.
PR: 48471
The facility_initialized and facility arrays are the same size and were
intended to be indexed the same. I believe this mismatch was just a
typo/braino in r208731.
Reported by: Coverity
CID: 1017430
Sponsored by: EMC / Isilon Storage Division
An mbpool is allocated with a contiguous array of mbpages. Freeing an
individual mbpage has never been valid. Don't do it.
This bug has been present since this code was introduced in r117624 (2003).
Reported by: Coverity
CID: 1009687
Sponsored by: EMC / Isilon Storage Division
- Factor out common part to zynq-7000.dtsi
- Fix problem with Zynq interrupts by using interrupt "triples"
in .dtsi file to differentiate between edge-triggered and
level-triggered interrupts
- cgem driver now recognizes "status" property
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D6095
The disgusting macro INP_WLOCK_RECHECK may early-return. In
tcp_default_ctloutput() the TCP_CCALGOOPT case allocates memory before invoking
this macro, which may leak memory.
Add a _CLEANUP variant that takes a code argument to perform variable cleanup
in the early return path. Use it to free the 'pbuf' allocated in
tcp_default_ctloutput().
I am not especially happy with this macro, but I reckon it's not any worse than
INP_WLOCK_RECHECK already was.
Reported by: Coverity
CID: 1350286
Sponsored by: EMC / Isilon Storage Division
