Commit graph

99441 commits

Author SHA1 Message Date
Kevin Lo
d4bcd25553 Add the D-Link DWA-125 rev D1.
Tested by myself.
2014-08-20 01:26:27 +00:00
Alexander Motin
2ac1d5afc8 Fix lock recursion on LUN shutdown, introduced on r269497.
MFC after:	3 days
2014-08-19 17:04:18 +00:00
Bryan Drewery
f874ca3efd Bump __FreeBSD_version after r269489 so ports can use it. 2014-08-19 15:47:51 +00:00
Bryan Drewery
5608fd23c2 Revert r267233 for now. PIE support needs to be reworked.
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
   build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
   where it never would work anyhow, such as csu or loader. This suggests
   there may be better ways of adding support to the tree. Many of these
   cases can be fixed such that -fPIE will work but there is really no
   reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
   really building libraries but have been using bsd.prog.mk because the code
   is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
   been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by:	kib
2014-08-19 15:04:32 +00:00
Kevin Lo
7e1c22c476 Sort ASUS section and add USB device ID of ASUS USB-AC51. 2014-08-19 09:02:58 +00:00
Warner Losh
d8f5c1e164 New DTS files to suppport the SAM9260EK eval board. Derived, in part,
from the SAM9G20EK dts files (so that file is GPL'd).
2014-08-19 03:51:05 +00:00
Lawrence Stewart
8b0fe327e8 Destroy the "qdiffsample_zone" UMA zone on unload to avoid a use-after-unload
panic easily triggered by running "sysctl -a" after unload.

Reported and tested by:	Grenville Armitage <garmitage@swin.edu.au>
MFC after:	1 week
2014-08-19 02:19:53 +00:00
Marcel Moolenaar
4ec7371233 For vendors like Juniper, extensibility for sockets is important. A
good example is socket options that aren't necessarily generic.  To
this end, OSD is added to the socket structure and hooks are defined
for key operations on sockets.  These are:
o   soalloc() and sodealloc()
o   Get and set socket options
o   Socket related kevent filters.

One aspect about hhook that appears to be not fully baked is the return
semantics (the return value from the hook is ignored in hhook_run_hooks()
at the time of commit).  To support return values, the socket_hhook_data
structure contains a 'status' field to hold return values.

Submitted by:	Anuranjan Shukla <anshukla@juniper.net>
Obtained from:	Juniper Networks, Inc.
2014-08-18 23:45:40 +00:00
Warner Losh
ef9bab8ec8 Make note about reset vs RTOE actions... 2014-08-18 21:04:35 +00:00
Alan Cox
ada1ae623e There exists a possible sequence of page table page allocation failures
starting with a superpage demotion by pmap_enter() that could result in
a PV list lock being held when pmap_enter() is just about to return
KERN_RESOURCE_SHORTAGE.  Consequently, the KASSERT that no PV list locks
are held needs to be replaced with a conditional unlock.

Discussed with:	kib
X-MFC with:	r269728
Sponsored by:	EMC / Isilon Storage Division
2014-08-18 20:28:08 +00:00
Scott Long
274919e965 Deal explicitly with possible failures of make_dev_alias_p() in GEOM.
Submitted by:   Mariusz Zaborski <oshogbo@FreeBSD.org>
MFC after:      3 days
2014-08-18 19:27:47 +00:00
Hans Petter Selasky
f09566d3bd Use the "bSubslotSize" and "bSubFrameSize" fields to obtain the actual
sample size. According to the USB audio frame format specification
from USB.org, the value in the "bBitResolution" field can be less than
the actual sample size, depending on the actual hardware, and should
not be used for this computation.

PR:		192755
MFC after:	1 week
2014-08-18 14:30:43 +00:00
Warner Losh
40ad132dfd /usr/libexec/ld.so.1 never was a thing on FreeBSD/arm. This was the
FreeBSD 3.x and 4.x run time linker. FreeBSD/arm's first release was
5.0. Retire this long-dead code.
2014-08-18 02:45:06 +00:00
Warner Losh
817dc00433 Expand the elf brandelf infrastructure to give access to the whole ELF
header (Elf_Ehdr) to determine if a particular interpretor wants to
accept it or not. Use this mechanism to filter EABI arm on OABI arm
kernels, and vice versa. This method could also be used to implement
OABI on EABI arm kernels, if desired, or to allow a single mips kernel
to run o32, n32 and n64 binaries.

Differential Revision: https://reviews.freebsd.org/D609
2014-08-18 02:44:56 +00:00
Bjoern A. Zeeb
e6b802649c Remove keyboard entropy [1] from r270105.
Reported by:		ian [1]
(Pointy hat)^2 to:	imp
2014-08-17 18:27:02 +00:00
Warner Losh
71db9bfe7d Add missing license to at91_common.c. It was committed w/o a license.
Pointy hat to: imp@
2014-08-17 16:53:19 +00:00
Warner Losh
7945ebfd6c Define at91_master_clock in only one file to eliminate warnings about
it multiply defined commons.
2014-08-17 16:53:14 +00:00
Warner Losh
8f5f93be3a Convert the HL201 config file to use FDT. 2014-08-17 16:53:10 +00:00
Luigi Rizzo
1460a86867 staticize two functions, and use proper format for a struct sglist
(reported by bz)
2014-08-17 10:25:27 +00:00
Edward Tomasz Napierala
3914ddf8a7 Bring in the new automounter, similar to what's provided in most other
UNIX systems, eg. MacOS X and Solaris.  It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.

There are still a few outstanding problems; they will be fixed shortly.

Reviewed by:	allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric:	D523
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	The FreeBSD Foundation
2014-08-17 09:44:42 +00:00
Ian Lepore
6a3fc532ab When the initarm_* routines were renamed to platform_* and moved to their
own header file, the lovely block of comments explaining what the generic
init code expects of the soc implementations got lost, restore it.
2014-08-17 02:56:58 +00:00
Ian Lepore
93f6c1b54f Rename the old initarm_* functions to the new platform_* names. Also
move the registration of the static device map table into the function
intended to do devmap init stuff.
2014-08-17 02:53:36 +00:00
Alexander V. Chernikov
f88c97416e * Use standard net/sff8472.h header for sff bits and offsets.
* Convert sff_8472_id to 'const char *' to please clang.

Pointed by:	np
2014-08-16 21:53:44 +00:00
Mark Johnston
266b4a78c2 Factor out the common code for function boundary tracing instead of
duplicating the entire implementation for both x86 and powerpc. This makes
it easier to add support for other architectures and has no functional
impact.

Phabric:	D613
Reviewed by:	gnn, jhibbits, rpaulo
Tested by:	jhibbits (powerpc)
MFC after:	2 weeks
2014-08-16 21:42:55 +00:00
Ian Lepore
1dfe3d275c Move the imx6 sysctl temperature info to hw.imx6 where all the other
soc-wide info lives.  It was under dev.imx6_anatop.0.

What does anatop mean anyway?  Nobody seems to know, so it's probably
not where somebody will think to look for imx6 hardware info.
2014-08-16 20:44:45 +00:00
Luigi Rizzo
4bf50f18eb Update to the current version of netmap.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.

Basically no user API changes (some bugfixes in sys/net/netmap_user.h).

In detail:

1. netmap support for virtio-net, including in netmap mode.
  Under bhyve and with a netmap backend [2] we reach over 1Mpps
  with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.

2. (kernel) add support for multiple memory allocators, so we can
  better partition physical and virtual interfaces giving access
  to separate users. The most visible effect is one additional
  argument to the various kernel functions to compute buffer
  addresses. All netmap-supported drivers are affected, but changes
  are mechanical and trivial

3. (kernel) simplify the prototype for *txsync() and *rxsync()
  driver methods. All netmap drivers affected, changes mostly mechanical.

4. add support for netmap-monitor ports. Think of it as a mirroring
  port on a physical switch: a netmap monitor port replicates traffic
  present on the main port. Restrictions apply. Drive carefully.

5. if_lem.c: support for various paravirtualization features,
  experimental and disabled by default.
  Most of these are described in our ANCS'13 paper [1].
  Paravirtualized support in netmap mode is new, and beats the
  numbers in the paper by a large factor (under qemu-kvm,
  we measured gues-host throughput up to 10-12 Mpps).

A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.

Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.

This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.

A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.

MFC after:	3 days.
2014-08-16 15:00:01 +00:00
Luigi Rizzo
a5b6123ea9 print additional debugging info in virtqueue_dump()
(not fundamental, but useful to debug performance issues on vtnet)

MFC after:	3 days
2014-08-16 13:13:17 +00:00
Roger Pau Monné
af371fc66a net: move interface removal notification up in if_detach_internal
This is needed to prevent having interfaces with ifp->if_addr == NULL
on bridge interfaces. Moving the notification event handlers up makes
sure the interfaces are removed before doing any more cleanup.

Sponsored by: Citrix Systems R&D
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D598

net/if.c
 - Move interface removal notification up in if_detach_internal.
2014-08-16 10:47:24 +00:00
Konstantin Belousov
5e1d15a879 Complete r254667, do not destroy pmap lock if KVA allocation failed.
Submitted by:	Svatopluk Kraus <onwahe@gmail.com>
MFC after:	1 week
2014-08-16 08:31:25 +00:00
Adrian Chadd
a5d6708eed Add if_ath_alq code into the non-module build. 2014-08-16 03:05:02 +00:00
Warner Losh
d90e30ba36 Implement the FDT static pinctl/pinmux spec for Atmel. This will
configure the mux and config registers for PIO devices based on what
we find in the FDT. I developed it per the spec that had been
committed to Linux in the January 2014 time frame and haven't
updated. In short, bundles of pins are activated in specific ways for
specific configurations, and we implement all of that.

What's not included is a MI device infrastructure, any dynamic
run-time changing of these pins, etc. Also not included are hooks into
all the drivers to enable the latter (static at boot no driver changes
are needed). These larger questions will need to be answered once we
have more drivers like this for more platforms, or somebody has a heck
of a lot of time to research a bunch of platforms, the Linux solution
(which is good, but has its warts), etc.
2014-08-15 16:08:52 +00:00
Mark Johnston
ba78d6b7a1 Correct the order of arguments passed to LIST_INSERT_AFTER().
Reviewed by:	kib
X-MFC-With:	r269656
2014-08-15 15:42:58 +00:00
Gleb Smirnoff
e85343b1a5 Do not lookup source node twice when pf_map_addr() is used.
PR:		184003
Submitted by:	Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by:	InnoGames GmbH
2014-08-15 14:16:08 +00:00
Gleb Smirnoff
afab0f7e01 pf_map_addr() can fail and in this case we should drop the packet,
otherwise bad consequences including a routing loop can occur.

Move pf_set_rt_ifp() earlier in state creation sequence and
inline it, cutting some extra code.

PR:		183997
Submitted by:	Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by:	InnoGames GmbH
2014-08-15 14:02:24 +00:00
Konstantin Belousov
afe55ca373 Implement 'fast path' for the vm page fault handler. Or, it could be
called a scalable path.  When several preconditions hold, the vm
object lock for the object containing the faulted page is taken in
read mode, instead of write, which allows parallel faults processing
in the region.

Namely, the fast path is taken when the faulted page already exists
and does not need copy on write, is already fully valid, and not busy.
For technical reasons, fast path is avoided when the fault is the
first write on the vnode object, or when the fault is for wiring or
debugger read or write.

On the fast path, pmap_enter(9) is passed the PMAP_ENTER_NOSLEEP flag,
since object lock is kept.  Pmap might fail to create the entry, in
which case the fallback to slow path is performed.

Reviewed by:	alc
Tested by:	pho (previous version)
Hardware provided and hosted by:	The FreeBSD Foundation and
	 Sentex Data Communications
Sponsored by:	The FreeBSD Foundation
MFC after:	2 week
2014-08-15 07:30:14 +00:00
Gleb Smirnoff
11341cf97e Fix synproxy with IPv6. pf_test6() was missing a check for M_SKIP_FIREWALL.
PR:		127920
Submitted by:	Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by:	InnoGames GmbH
2014-08-15 04:35:34 +00:00
Kevin Lo
73d76e77b6 Change pr_output's prototype to avoid the need for explicit casts.
This is a follow up to r269699.

Phabric:	D564
Reviewed by:	jhb
2014-08-15 02:43:02 +00:00
Warner Losh
6e8f9f5113 Print the symbolic bit names for the status when we get a timeout. 2014-08-14 23:17:33 +00:00
Gleb Smirnoff
a9572d8f02 - Count global pf(4) statistics in counter(9).
- Do not count global number of states and of src_nodes,
  use uma_zone_get_cur() to obtain values.
- Struct pf_status becomes merely an ioctl API structure,
  and moves to netpfil/pf/pf.h with its constants.
- V_pf_status is now of type struct pf_kstatus.

Submitted by:	Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by:	InnoGames GmbH
2014-08-14 18:57:46 +00:00
Gavin Atkinson
67e3b91b31 Update i386/NOTES and amd64/NOTES files to contain the complete list of
firmwares for iwn(4) and sort them.

MFC after:	1 week
2014-08-14 18:29:55 +00:00
Gavin Atkinson
c4df003eb3 Allow iwn105fw and iwn135 firmwares to be compiled into the kernel.
MFC after:	1 week
2014-08-14 18:16:27 +00:00
Neel Natu
4eec602102 Reword comment to match the interrupt mode names from the MPtable spec.
Reviewed by:	tychon
2014-08-14 18:03:38 +00:00
Warner Losh
c6cb86cc6a ins is only set and unused, but only when we're not doing software
single stepping. Only set it when we're doing that by bending
style(9) rules a little to avoid even worse #ifdef soup.
2014-08-14 16:01:51 +00:00
Warner Losh
20256b0bed Disable all inline warnings on gcc >= 4.3. Not sure exactly where the
cutover is, but we need better tools to cope with inline tuning per
compiler version than we have. This is a quick bandaid until such
tools are around.
2014-08-14 16:01:46 +00:00
Warner Losh
d628fa28fa Delete pp_isadma. It isn't use, and the code that used it has been
commented out (temporarily) since 1998 when this driver hit the
tree. Also, no need to compute the ethernet header and then never use
it.
2014-08-14 16:01:38 +00:00
Warner Losh
e94a64de00 Streamline format extensions. Either the compiler supports them, and
we enable them and format wordings. Or it doesn't, and we disable
format warnings because the kernel uses the extensions pervasively.
2014-08-14 16:01:33 +00:00
Alan Cox
9f746b66df Avoid pointless (but harmless) actions on unmanaged pages.
Reviewed by:	kib
Sponsored by:	EMC / Isilon Storage Division
2014-08-14 15:46:15 +00:00
Steven Hartland
dc98c62f89 Added 4K quirks for Corsair Force GT and Samsung 840 SSDs
MFC after:	1 week
Sponsored by:	Multiplay
2014-08-14 13:57:17 +00:00
Steven Hartland
d7b5bae512 Renamed hw.ixgbe.unsupported_sfp -> hw.ix.unsupported_sfp
This now matches all other ixgbe sysctl / tunables.

Sponsored by:	Multiplay
2014-08-14 13:25:05 +00:00
Xin LI
7001d850bb Add a new loader tunable, vm.kmem_zmax which allows a system administrator
to limit the maximum allocation size that malloc(9) would consider using
the UMA cache allocator as backend.

Suggested by:	alfred
MFC after:	2 weeks
2014-08-14 05:31:39 +00:00