If some device is plugged back in after unplug before the probe periph
destroyed, it will just restart the probe process. But I've found that
PROBE_INQUIRY_CKSUM flag not cleared between the iterations may cause
AC_FOUND_DEVICE not reported on the second iteration, and because of
AC_LOST_DEVICE reported during the first iteration, the device end up
configured, but without any periphs attached.
We've found that enabled serial console and 102-disk JBOD cause enough
probe delays to easily trigger the issue for half of the disks. This
change fixes it reliably on my tests.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This makes the da(4) driver use UMA for its CCBs by default,
like ada(4) already does. Please let me know via email
if you notice any suspicious kernel messages,
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31257
Note that, as pointed out by scottl@, this code should really look
a bit different, in that the stack allocations should be replaced
with dynamic allocation, and the periph creation should be moved
to a context where one can use M_WAITOK. See the review for more
details. For now let's go with a minimal fix until we're done with
UMA CCBs.
Reviewed By: mav, imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30298
No functional changes. Do not MFC this, it changes kernel ABI.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30698
It looks like I've missed a couple of places where we don't clear
stack-allocated CCBs. Don't panic when that happens, just print
a warning.
This is a temporary measure until I get those cases fixed.
Reviewed By: markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30296
Previously, daregister() could have been called before dainit()
initialized the UMA zone. This would trip a KASSERT.
Reported By: pho
Tested By: pho
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
This patch makes it possible for CAM to use small CCBs allocated
from an periph-specific UMA zone instead of the usual, huge ones.
The end result is that CCBs issued via da(4) take 544B (size of
ccb_scsiio) instead of the usual 2kB (size of 'union ccb', ~1.5kB,
rounded up by malloc(9)). For ATA it's 272B. We waste less
memory, we avoid zeroing the unused 1kB, and it should be easier
to allocate those CCBs in low memory conditions. It should also
be possible to use uma_zone_reserve(9) to improve behaviour
in low memory conditions even further.
Note that this does not change the size, or the layout, of CCBs
as such. CCBs get allocated in various different ways, in particular
on the stack, and I don't want to redo all that. Instead, this
provides an opt-in mechanism for the periph to declare "my start()
callback is fine with receiving a CCB allocated from this UMA zone".
In other words, most of the code works exactly as it used to; the
change only happens to IOs issued by xpt_run_allockq(), which
is - conveniently - pretty much all that matters for performance.
The reason for doing it this way is that it's pretty small, localized
change, and can be implemented gradually and iteratively: take a
periph, make sure its start() callback only casts the CCBs it takes
to a particular type of CCB, for example ccb_scsiio, and that it only
casts CCBs returned by cam_periph_getccb() to that type, then add UMA
zone for that size, and declare it safe to XPT.
This is disabled by default. Set 'kern.cam.ada.enable_uma_ccbs=1'
and 'kern.cam.da.enable_uma_ccbs=1' tunables to enable it. Testing
is welcome; I will flip the default to enable in two weeks from now.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28674
From my understanding this could happen with iSCSI LUNs with
unusually long names. The bug would make CAM fail to retrieve
the full inquiry data. Instead of bumping the size of the local
variable, just use a macro.
Reviewed By: imp, mav
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #50
Differential Revision: https://reviews.freebsd.org/D29991
This is my second pass, this time over all of CAM except
for the SCSI target bits. There should be no functional
changes.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29549
This is required for small CCBs support, where we need to track
whether the CCB was allocated from an UMA zone or not. There are
no (intended) functional changes with the current source.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29484
There were two definitions for the SCSI VPD Block Device Characteristics (page
0xb1): struct scsi_vpd_block_characteristics and struct
scsi_vpd_block_device_characteristics. The latter is more complete and more
widely used. Convert uses of the former to the latter by tweaking the da driver
and removing sturct scsi_vpd_block_characteristics.
Add 04/25 Depopulation restoration in progress, 31/04 Depopulation failed, and
31/05 Depopulation restoration failed.
These are defined in SPC-6r2 (though 31/4 was added in an earlier draft). They
relate to different aspects of in-progress or failed depopulation removal and
restoration commands.
If a disk's SIM doesn't support polling, then it can't be used to
store crashdumps. Leave d_dump NULL in that case so that dumpon(8)
fails gracefully rather than having dumps fail at crash time.
Reviewed by: scottl, mav, imp
MFC after: 2 weeks
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D28454
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
Sometimes, this drive will be present in the system such that the the
firmware identification string doesn't start with ATA, such as when
it's behind a SATA-to-SAS interposer. Add another quirk for that.
Submitted by: github user mr44er
Github PR: 423
I had failed to notice that sgsendccb() was using cam_periph_mapmem()
and thus was not passing down user pointers directly to drivers. In
practice this broke requests submitted from userland.
PR: 249395
Reported by: Trenton Schulz <trueos@norwegianrockcat.com>
Reviewed by: scottl
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26550
It allows to report to initiator LU identifying information, preset via
"ident_info" and "text_ident_info" options.
Unfortunately it is impossible to implement SET IDENTIFYING INFORMATION,
since we have no persistent storage it requires, so the information is
read-only for initiator and has to be set out-of-band.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This was changed in the review process for the flags sysctl. The
reasons for the change are no longer valid as the code changed after
that. Cast the one place where it might make a difference (but I don't
think it does). This restores the ability to see flags for softc in
gdb.
Allocate a temporary buffer in the kernel to serve as the CCB data
pointer for a pass-through transaction and use copyin/copyout to
shuffle the data to/from the user buffer.
Reviewed by: scottl, brooks
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24489
The handle_string callback for the ENCIOC_SETSTRING ioctl was passing
a user pointer to memcpy(). Fix by using copyin() instead.
For ENCIOC_GETSTRING ioctls, the handler was storing the user pointer
in a CCB's data_ptr field where it was indirected by other code. Fix
this by allocating a temporary buffer (which ENCIOC_SETSTRING already
did) and copying the result out to the user buffer after the CCB has
been processed.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24487
The handle_string callback for the ENCIOC_GET_ENCNAME and
ENCIOC_GETENCID ioctls tries to copy the size of the generated string
out to userland. However, the callback only has access to the kernel
copy of the structure populated by copyin(). The copyout() call
simply overwrites the value in the kernel's copy preventing the
subsequent overflow prevention logic from working.
Fix this by instead doing a copyout() of the updated length in the
caller after the callback returns.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24456
copyin/copyout are sufficient to guard against bad addresses. They will return
EFAULT if the user is up to no good (by choice or ignorance). There's no point
in checking, since it doesn't even improve the error messages.
Noticed by: jhb
Reviewed by: brooks, jhb
SES specifications allows the string to be NULL-terminated, while previous
code was considering it as invalid due to incorrectly ordered conditions.
MFC after: 1 week
Sponsored by: iXsystem, Inc.
Broadcom 9400-8i8e HBAs report virtual SES device, where slots representing
external connectors are reported having no phys. Since sasdev_phys is NULL
there and proto_hdr is a union, ses_paths_iter() misinterpreted them as ATA.
Add explicit protocol check to properly differentiate them.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
declarations.
We typically don't use them elsewhere in the kernel, and they aren't
needed here: the actual functions are a few lines away and aren't
mutually recursive.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
handler to accept a poitner to a u_int. To make the type of the softc flags
stable and defined, make it a u_int. Cast the enum types to u_int for arg2 so
when passing to dabitsysctl it's a u_int.
Noticed by: emax@
Differential Revision: https://reviews.freebsd.org/D23785
Rotating and unmapped_io are really da flags. Convert them to a flag so it will
be reported with the other flags for the device. Deprecate the .rotating and
.unmapped_io sysctls in FreeBSD 14 and remove the softc ints.
Differential Revision: https://reviews.freebsd.org/D23417
Export the current flags. They can be useful to other programs wanting to do
special thigns for removable or similar devices.
Differential Revision: https://reviews.freebsd.org/D23417
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in
drivers when the driver doesn't support a particular command. Do a
sweep and fix that.
Reported by: imp
