traffic class for rate limiting.
Add experimental knobs that allow the user to specify a default pktsize
and burstsize for traffic classes associated with a port:
dev.<ifname>.<instance>.tc.pktsize
dev.<ifname>.<instance>.tc.burstsize
Sponsored by: Chelsio Communications
them display the current value of the bitfield rather than the fixed
value that was provided when the sysctl node was created.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Ignore any type of TID where the start/end values are not in the
correct order. There are situations where the firmware isn't able to
reserve room for the number requested in the config file but doesn't
report a failure during configuration and instead sets end <= start.
- Track start/end in tid_tab and remove some redundant copies from
adapter->params.
- Move all the start/end and other read-only parameters to a quiet part
of tid_tab, away from the tid locks.
MFC after: 1 week
Sponsored by: Chelsio Communications
initializing the softc for a per-flow rate limiter. The limit happens
to be the same for both and the existing code worked by accident for
common configurations.
Reported by: gallatin@
Sponsored by: Chelsio Communications
Start in "class" instead of "flow" mode. This eliminates the need to
specify an MTU, which is not available that early anyway. It also
allows the user to manually configure ch-rl rate limiting after attach.
This used to fail because ch-rl isn't supported if cl-rl "flow" mode is
configured.
Set all traffic classes to 1Gbps during initialization. The goal is to
start off with _any_ valid configuration and 1Gbps works even for
gigabit cards.
Sponsored by: Chelsio Communications
Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers. Avoid redundancy and complexity in
individual drivers by allocating session memory in the framework and
providing it to drivers in ::newsession().
Session handles are no longer integers with information encoded in various
high bits. Use of the CRYPTO_SESID2FOO() macros should be replaced with the
appropriate crypto_ses2foo() function on the opaque session handle.
Convert OCF drivers (in particular, cryptosoft, as well as myriad others) to
the opaque handle interface. Discard existing session tracking as much as
possible (quick pass). There may be additional code ripe for deletion.
Convert OCF consumers (ipsec, geom_eli, krb5, cryptodev) to handle-style
interface. The conversion is largely mechnical.
The change is documented in crypto.9.
Inspired by
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .
No objection from: ae (ipsec portion)
Reported by: jhb
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
can time out if it's backed up due to a non-stop deluge of PAUSE frames
from a misbehaving peer. Detect this situation and toggle MPS TxEn
to allow forward progress.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
of descriptors processed. Add the ability to gather a certain maximum
number of frames in the driver's rx before waking up netmap rx. If
there aren't enough frames then netmap rx will be woken up as usual.
hw.cxgbe.nm_rx_nframes
Sponsored by: Chelsio Communications
The driver assumes the list can change (even though it does't right now)
and queries it every time the sysctl runs.
sysctl dev.<nexus>.<inst>.local_cpus
sysctl dev.<nexus>.<inst>.intr_cpus
sysctl dev.t6nex.0.local_cpus
sysctl dev.t6nex.0.intr_cpus
Sponsored by: Chelsio Communications
It was needed only for ia64 where it was implemented as a call to
bswapXX, which was always a real function. htobeXX with a constant
argument is calculated at compile-time everywhere else.
MFC after: 1 week
Sponsored by: Chelsio Communications
for a port. Fix other related issues while here:
- Require port lock for access to link_config.
- Allow 100Mbps operation by tracking the speed in Mbps. Yes, really.
- New port flag to indicate that the media list is immutable. It will
be used in future refinements.
This also fixes a bug where the driver reports incorrect media with
recent firmwares.
MFC after: 2 days
Sponsored by: Chelsio Communications
This is hardware support for the SO_MAX_PACING_RATE sockopt (see
setsockopt(2)), which is available in kernels built with "options
RATELIMIT".
Relnotes: Yes
Sponsored by: Chelsio Communications
If a socket is closed or shutdown and a partial record (or what
appears to be a partial record) is waiting in the socket buffer,
discard the partial record and close the connection rather than
waiting forever for the rest of the record.
Reported by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
An etid (ethoffload tid) is allocated for a send tag and it acquires a
reference on the traffic class that matches the send parameters
associated with the tag.
Sponsored by: Chelsio Communications
provisioned for NIC_ETHOFLD and the kernel has option RATELIMIT.
It is possible to use the chip's offload queues for normal NIC Tx and
not just TOE Tx. The difference is that these queues support out of
order processing of work requests and have a per-"flowid" mechanism for
tracking credits between the driver and hardware. This allows Tx for
any number of flows bound to different rate limits to be submitted to a
single Tx queue and the work requests for slow flows won't cause HOL
blocking for the rest.
Sponsored by: Chelsio Communications
by default.
This is the first of a series of commits that will add support for
RATELIMIT kernel option to the base if_cxgbe driver, for use with
ordinary NIC traffic "flows". RATELIMIT is already supported by t4_tom
for the fully-offloaded TCP connections that it handles.
Sponsored by: Chelsio Communications
if an error is reported while pre-processing the configuration file that
the driver attempted to use.
Also, allow the user to explicitly use the built-in configuration with
hw.cxgbe.config_file="built-in"
MFC after: 2 days
Sponsored by: Chelsio Communications
- Driver support for hardware NAT.
- Driver support for swapmac action.
- Validate a request to create a hashfilter against the filter mask.
- Add a hashfilter config file for T5.
Sponsored by: Chelsio Communications
