Specifically, use 'const' for the key passed to the 'setkey' method
and 'const' for the 'iv' passed to the 'reinit' method.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21347
They follow the conventions set by rw and sx lock probes. There is
an additional lockstat:::lockmgr-disown probe.
Update lockstat(1) to report on contention and hold events for
lockmgr locks. Document the new probes in dtrace_lockstat.4, and
deduplicate some of the existing probe descriptions.
Reviewed by: mjg
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21355
null_nodeget which follows almost always finds the target vnode in the hash,
avoiding insmntque1 altogether. Should it be needed, it already checks if the
lock needs to be upgraded.
Reviewed by: kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20244
Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.
When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.
This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.
Submitted by: cognet@ (Olivier Houchard)
Nvme drives can be attached in a number of different ways. Separate out the PCI
attachment so that we can have other attachment types, like ahci and various
types of NVMeoF.
Submitted by: cognet@
If device is unplugged from the system (CSTS register reads return
0xffffffff), it makes no sense to send any more recovery requests or
expect any responses back. If there is a detach call in such state,
just stop all activity and free resources. If there is no detach
call (hot-plug is not supported), rely on normal timeout handling,
but when it trigger controller reset, do not wait for impossible and
quickly report failure.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The original code came from a desire to minimize the number of updates
to v_wire_count, which prior to r329187 was updated using atomics.
However, there is no significant benefit to batching today, so simply
allocate pages using VM_ALLOC_WIRED and rely on system accounting.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D21323
With r349546, it is a responsibility of the writer to clear PIPE_DIRECTW
after pinned data has been read. In particular, once a reader has
drained this data, there is a small window where the pipe is empty but
PIPE_DIRECTW is set. pipe_poll() was using the presence of PIPE_DIRECTW
to determine whether to return POLLIN, so in this window it would
claim that data was available to read when this was not the case.
Fix this by modifying several checks for PIPE_DIRECTW to instead look
at the number of residual bytes in data pinned by a direct writer. In
some cases we really do want to check for PIPE_DIRECTW, since the
presence of this flag indicates that any attempt to write to the pipe
will block on the existing direct writer.
Bisected and test case provided by: mav
Tested by: pho
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21333
There is no need to duplicate this file when it can be trivially
shared (just exposing sections previously under #ifdef _KERNEL).
MFC with: r351273
Differential Revision: The FreeBSD Foundation
- Add a vm_pagequeue_remove() function to physically remove a page
from its queue and update the queue length.
- Remove vm_page_pagequeue_lockptr() and let vm_page_pagequeue()
return NULL for dequeued pages.
- Avoid unnecessarily reloading the queue index if vm_page_dequeue()
loses a race with a concurrent queue operation.
- Correct an always-true assertion: vm_page_dequeue() may be called
from the page allocator with the page unlocked. The assertion
m->order == VM_NFREEORDER simply tests whether the page has been
removed from the vm_phys free lists; instead, check whether the
page belongs to an object.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21341
It is useful for testing purposes to be able to drain UMA caches, so
do not limit the sysctl to DIAGNOSTIC kernels.
MFC after: 1 week
Sponsored by: Netflix
As of r332974 the page daemon does not requeue pages during a scan
of the active queue, so there is not much value in doing so here
either.
Reviewed by: alc, dougm, kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21343
an retransmission of the initial SYN (with data) would
cause us to strip the SYN and decrement/increase offset/len
which then caused us a -1 offset and a panic.
Reported by: Larry Rosenman
(Michael Tuexen helped me debug this at the IETF)
Disable ar9300_swap_tx_desc() for the moment. It is an unused
function only tried to compile on big endian systems.
Found by: s390x buildkernel
MFC after: 3 months
seqc_consistent_* return bool, not seqc. [0]
While here annotate the rarely true condition - it is expected to run
into it on vare occasion (compared to the other case).
Reported by: oshogbo [0]
Sponsored by: The FreeBSD Foundation
There is no reason to duplicate this file when it can be trivially
shared (just exposing one section previously under #ifdef _KERNEL).
Reviewed by: imp, cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21346
This fixes possible double call of fail_fn, for example on hot removal.
It also allows ctrlr_fn to safely return NULL cookie in case of failure
and not get useless ns_fn or fail_fn call with NULL cookie later.
MFC after: 2 weeks
Otherwise the mutex needs to be dropped when copying out the midistat
sbuf, leading to a race which allows one to read kernel memory beyond
the end of the sbuf buffer.
Reported and tested by: pho
Security: CVE-2019-5612
Summary:
Reduce the diff between AIM and Book-E even more. This also cleans up
vmparam.h significantly.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D21301
order to have struct mii_data available. However, it only really needs
a forward declaration of struct mii_data for use in pointer form for
the return type of a function prototype.
Custom kernel configuration that have usb and fdt enabled, but no miibus,
end up with compilation failures because miibus_if.h will not get
generated.
Due to the above, the following changes have been made to usb_ethernet.h:
* remove the inclusion of mii headers
* forward-declare struct mii_data
* include net/ifq.h to satify the need for complete struct ifqueue
Reviewed by: ian
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D21293
We suffer at least one round trip ACK latency every command / packet that
GDB has to send and receive, and the response format for 'info threads'
supports packing many threads IDs into a single packet, so do so.
Adds and uses a new API, gdb_txbuf_has_capacity(), which checks for a
certain number of bytes available in the outgoing txbuf.
On an example amd64 VM, the number of RTTs to transmit this list is reduced
by a factor of 110x. This is especially beneficial with recent GDB, which
seems to request the list at least twice during attach.
VM_OBJECT_DROP/VM_OBJECT_PICKUP to handle functions that are called with
uncertain lock state.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21310
When tun/tap were merged, appropriate MODULE_VERSION should have been added
for things like modfind(2) to continue to do the right thing with the old
names.
Reported by: jhb
Return an empty string when the location is unknown instead of the
string "unknown". This ensures that all location entries are of
the form key=val.
Suggested by: imp
Approved by: jhb (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21326
nd_buf is used to buffer headers (for both the kernel dump itself and
for EKCD) before the final call to netdump_dumper(), which flushes
residual data in nd_buf. As a result, a small portion of the residual
data would be corrupted. This manifests when kernel dump compression
is enabled since both zstd and zlib detect the corruption during
decompression.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D21294
ti,dual-volt property say that the eMMC support 1.8V and 3.3V not 3.0V
Use the correct caps for the mmc stack.
Note that the MMCHS_SD_CAPA register can only be written once after bootup
so if one is using a u-boot compiled with eMMC support (this is the default)
this code is a no-op but just in case someone have u-boot compiled without
eMMC support this make eMMC works when the kernel is booted.
MFC after: 1 week
The fdt node for this driver is a simple-mfd and syscon compatible one
meaning that simplemfd will be the driver attached for it. The gpio driver
is attached to the 'gpio' subnode so use syscon_get_handle_default to
obtain the handle of the syscon from the parent device and use this
to read/write to the memory region.
MFC after: 1 week
fs-specific part of vfs_statfs routines only fill in small portion of the
structure. Previous code was always copying everything at a higher layer to
acoomodate it and this patch does the same.
'df' (no arguments) worked fine because the caller uses mnt_stat itself as the
target buffer, making all the copying a no-op for its own case.
'df /' and similar use a different consumer which passes its own buffer and
this is where you can run into trouble.
Reported by: cy
Fixes: r351193
Sponsored by: The FreeBSD Foundation
This is similar to checks for td_sx_slocks and td_rw_rlocks.
Although td_lk_slocks is an implementation detail, it still makes sense
to validate it.
MFC after: 1 week
Sponsored by: Panzura
Without this patch, when an application performed lseek(SEEK_DATA/SEEK_HOLE)
on a file in a file system that does not have its own VOP_IOCTL(), the
lseek(2) fails with errno ENOTTY. This didn't seem appropriate, since
ENOTTY is not listed as an error return by either the lseek(2) man page
nor the POSIX draft for lseek(2).
A discussion on freebsd-current@ seemed to indicate that implementing
a trivial algorithm that returns the offset argument for FIOSEEKDATA and
returns the file's size for FIOSEEKHOLE was the preferred fix.
http://docs.FreeBSD.org/cgi/mid.cgi?CAOtMX2iiQdv1+15e1N_r7V6aCx_VqAJCTP1AW+qs3Yg7sPg9wA
The Linux kernel appears to implement this trivial algorithm as well.
This patch adds a vop_stdioctl() that implements this trivial algorithm.
It returns errors consistent with vn_bmap_seekhole() and, as such, will
still return ENOTTY for non-regular files.
I have proposed a separate patch that maps errors not described by the
lseek(2) man page nor POSIX draft to EINVAL. This patch is under separate
review.
Reviewed by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21299
NUMA domain that the pages describe. Patch original from gallatin.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21252
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.
Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.
This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.
PR: 237083
Reviewed by: hps, emax
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21071
