TVSENSE may not be ready by the time t4_fw_initialize returns and the
firmware returns 0 if the driver asks for the Vdd before the sensor is
ready.
MFC after: 1 week
Sponsored by: Chelsio Communications
This is what iwlwifi seems to do, and the previous behaviour triggered
firmware panics during transmit on a 9560.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Though we don't otherwise use firmware's offload capabilities, we need
to set this flag when the MAC header's size isn't a multiple of four.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Configure the scheduler only for the management queue.
- Fix a bug when enabling the schduler: the queues are specified using a
bitmask.
- Fix style in the area.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is the multiqueue receive code required for 9000-series chips.
Note that we still only configure a single RX queue for now. Multiqueue
support will require MSI-X configuration and a scheme for managing a
global pool of RX buffers.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
For now iwm only ever uses queue 0 and the management queue, but my 9560
raises a software error interrupt during initialization if this flag is
not set. iwlwifi sets it for all 7000- and 8000-series hardware, so we
might as well do it unconditionally.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The firmware for 9000-series and newer devices has a different receive
API which supports multiple queues.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Match such chips using the device ID. We should really be checking the
subdevice as well, since a smaller number of 9460 and 9560 devices
actually belong to a new series of devices and require different
firmware, but that will require some extra logic in iwm_attach().
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Convert existing device family checks to avoid assuming that the device
family is always one of IWM_DEVICE_FAMILY_7000 or _8000.
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Only perform the call when a qfull bit transitions. While here, avoid
assignments in declarations in iwm_mvm_rx_tx_cmd().
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This ensures that the driver softc reflects device capabilities as early
as possible, for use by device initialization code that is conditional
on certain capabilities.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Also ensure that the htole* macros are applied correctly when specifying
the segment length and upper address bits. No functional change
intended (unless you use iwm(4) on a big-endian machine).
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- amd_intr() does not account for the offset (0x200) in the counter
MSR address and ends up accessing invalid regions while reading
counter value after the 4th counter (0xC001000[8,9,..]) and
erroneously updates the counter values for counters [1-4].
- amd_intr() should only check core pmcs for interrupts since
other types of pmcs (L3,DF) cannot generate interrupts.
- fix pmc NMI's being ignored due to NMI latency on newer AMD processors
Note that this fixes a kernel panic due to GPFs accessing MSRs on
higher core count AMD cpus (seen on both Rome 7502P, and
Threadripper 2990WX 32-core CPUs)
Discussed with: markj
Submitted by: Shreyank Amartya
Differential Revision: https://reviews.freebsd.org/D21553
The Microchip LAN7430 is a PCIe 10/100/1000 Ethernet MAC with integrated
PHY, and the LAN7431 is a MAC with RGMII interface.
To be connected to the build after further testing and review.
Committing now so that changes like r354345 (adding a common
ETHER_IS_ZERO macro) will update this driver too.
Submitted by: Gerald ND Aryeetey <aryeeteygerald_rogers.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20079
The pages stored in the ksyms object are not pageable. Moreover, this
obviates the need to set OBJ_NOSPLIT.
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22229
This function will call the regnode_check_voltage method for a given regulator
and check if the desired voltage in reachable by it.
Also adds a default method that check the std_param and which should be enough
for most regulators and add it as the method for axp* rk805 and fixed regulators.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22260
It is reported that those VFs share their RSS configuration with PF and,
thus, they cannot be configured independently.
Also:
- add missing opt_rss.h to if_ixv.c, otherwise RSS kernel option could
not be seen
- do not enable IXGBE_FEATURE_RSS on the older VFs
- set flowid / hash type to M_HASHTYPE_NONE or M_HASHTYPE_OPAQUE_HASH
(based on what the hardware reports) if IXGBE_FEATURE_RSS is not set
Reviewed by: nobody
MFC after: 4 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D21705
Some places in network code may need to verify that an ethernet address
is not the 'zero' address. Provide a standard macro ETHER_IS_ZERO for
this purpose, similar to the ETHER_IS_BROADCAST macro already available.
This patch also removes previous ETHER_IS_ZERO definitions in several
USB ethernet drivers, in favor of this centrally-located macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21240
A couple of drivers and one place in if.c use ETH_ADDR_LEN, even though
net/ethernet.h provides an equivalent ETHER_ADDR_LEN definition.
Cleanup all of the locations which refer to ETH_ADDR_LEN to use the
standard ETHER_ADDR_LEN instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, jpaetzel@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21239
Handle error bits of INTR_STAT and TX_ABORT registers.
Move interrupt clearing from interrupt handler to polling loop to get
common execution path with polled mode.
Do not clear interrupts with reading of IG4_REG_CLR_INTR register as
interrupts, triggered during the period from reg_read(IG4_REG_INTR_STAT)
to reg_read(IG4_REG_CLR_INTR) will be missed.
Instead, read each IG4_REG_CLR_* register separately.
INTR_STAT register exposes more useful informaton then STA register does
e.g. it exposes error and I2C bus STOP conditions. Make it a main source
of I2C transfer state.
