Some of the changes in this release:
* Large LLQ headers,
* Bug/stability fixes,
* Change of the README/Documentation.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Update the driver in order not to break its compilation
and make use of the new ENA logging system
Migrate platform code to the new logging system provided by ena_com
layer.
Make ENA_INFO the new default log level.
Remove all explicit use of `device_printf`, all new logs requiring one
of the log macros to be used.
IO queue related attributes are registered statically at driver attach
with the rest of the ENA specific sysctl nodes. However, the number of
queues can be changed at runtime via the `ena_sysctl_io_queues_nb`
request, leading to a potential exposure of attributes for non-existing
queues.
Introduce a new `ena_sysctl_update_queue_node_nb` function, which
updates the sysctl nodes after the number of queues is altered.
This happens by either registering or unregistering node specific oids,
based on a delta between the previous and current queue count.
NOTE: All unregistered oids must be registered again before the driver
detach, e.g. by another call to this function.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Calling free on a NULL pointer is valid, as appropriate check is already
done internally:
/* free(NULL, ...) does nothing */
if (addr == NULL)
return;
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Default LLQ (Low-latency queue) maximum header size is 96 bytes and can
be too small for some types of packets - like IPv6 packets with multiple
extension. This can be fixed, by using large LLQ headers.
If the device supports larger LLQ headers, the user can activate this
feature by setting sysctl tunable 'hw.ena.force_large_llq_header' to '1'
in the /boot/loader.conf file.
In case the device isn't supporting this feature, the default value (96B)
will be used.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
According to man style(9), only C-style comments should be used.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Implement support for the NXP LS1028A SoC MDIO controller.
It is attached to the internal PCI root complex.
The controller is used to communicate with PHYs of ports connected
to the internal switch.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30731
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Provide common MDIO code for two LS1028 ENETC controllers -
an external one found on the PCI bus and internal one found in ENETC.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30730
By definition ofw_bus_get_node() should consistently return -1 when there
is no associated OF node.
MFC after: 4 weeks
Discussed with: nwhitehorn
Analyzed in: https://reviews.freebsd.org/D30761
ddfc9c4c59 was missing changes to two files to complete the
bus_child_pnpinfo_str->bus_child_pnpinfo. This fixes the broken kernel
builds.
Sponsored by: Netflix
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
If the connection is in the process of disconnecting, ic_socket can be
NULL. For icl_cxgbei_conn_transfer_setup(), lock the connection and
check ic_socket before using it. For icl_cxgbei_conn_task_setup(),
the caller already holds the connection lock, so assert it and bail
early with ECONNRESET if the connection is disconnecting.
Reported by: Jithesh Arakkan @ Chelsio
Fixes: f949967c8e cxgbei: Fix a race between transfer setup and a peer reset.
The INQUIRY command may return a CAM_DATA_RUN_ERR code, even when
it succeeds. This happens during driver startup, causing the
current and further inquiries to be aborted, resulting in some
missing information about the controller.
Reviewed by: imp
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30843
Reserve one page for the DMA subsystem, that may need it when the I/O
buffer is not page aligned.
Without this change, writes with the maximum allowed size failed, if:
- physical memory was fragmented, making it necessary to use one DMA
segment for each page
- the buffer to be written was not page aligned, causing the DMA
subsystem to need one extra segment
In the scenario above, the DMA subsystem would run out of segments,
resulting in a write with no SG segments, that would fail.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30798
ni_txseqs is kept as 16-bit counter, but we need to trim the upper four
bits as they may have special meanings for the firmware / hardware.
For instance, bit 15 enables hardware / firmware generation of sequence
numbers that overrides sequence numbers programmed by the driver.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30814
Given all the code does operate on struct ifnet, the last step in this
longer series of changes now is to rename struct net_device to
struct ifnet (that is what it was defined to in the LinuxKPi code).
While mlx4 and OFED are "shared" code the decision was made years ago
to not write it based on the netdevice KPI but the native ifnet KPI
for most of it. This commit simply spells this out and with that
frees "struct netdevice" to be re-done on LinuxKPI to become a more
native/mixed implementation over time as needed by, e.g., wireless
drivers.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30515
The NIC TLS and TOE TLS modes in cxgbe(4) both work with TLS key
contexts. Previously, TOE TLS supported TLS key contexts created by
two different methods, and NIC TLS had a separate bit of code copied
from NIC TLS but specific to KTLS. Now that TOE TLS only supports
KTLS, pull common code for creating TLS key contexts and programming
them into on-card memory into t4_keyctx.c.
Sponsored by: Chelsio Communications
TOE TLS offload was first supported via a customized OpenSSL developed
by Chelsio with proprietary socket options prior to KTLS being present
either in FreeBSD or upstream OpenSSL. With the addition of KTLS in
both places, cxgbe's TOE driver was extended to support TLS offload
via KTLS as well. This change removes the older interface leaving
only the KTLS bindings for TOE TLS.
Since KTLS was added to TOE TLS second, it was somehat shoe-horned
into the existing code. In addition to removing the non-KTLS TLS
offload, refactor and simplify the code to assume KTLS, e.g. not
copying keys into a helper structure that mimic'ed the non-KTLS mode,
but using the KTLS session object directly when constructing key
contexts.
This also removes some unused code to send TX keys inline in work
requests for TOE TLS. This code was never enabled, and was arguably
sending the wrong thing (it was not sending the raw key context as we
do for NIC TLS when using inline keys).
Sponsored by: Chelsio Communications
Some code was using it already, but in many places we were testing
SO_ACCEPTCONN directly. As a small step towards fixing some bugs
involving synchronization with listen(2), make the kernel consistently
use SOLISTENING(). No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30678
Reviewed by: imp (earlier version), adrian (earlier version)
MFC after: 3 days
Sponsored by: Diablotin Systems
This framework is initial implementation of the simple-audio-card compatible
audio driver framework. It provides glue for CPU/codec/aux device.
Differential Revision: https://reviews.freebsd.org/D27830
Some arm64 SoCs have nodes in their fdts that describe devices
connected to the internal PCI bus. One such SoC is Freescale LS1028A.
In order to access information stored in them we need to add ofw bus
support to pci. Pass devinfo request up to our parent, which
is responsible for parsing all the information.
It allows to use ofw interface on PCI devices that support it.
This method is similar to sys/dev/acpica/acpi_pci.c.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30181
Some arm64 SoCs have nodes in their fdts that describe devices
connected to the internal PCI bus. One such SoC is Freescale LS1028A.
It expects the nodes to be mapped to devices enumerated using the standard
PCI method. Mapping is done by reading device and function ids from "reg"
property. Information is dts is used to describe MDIO/PHY connected
to a given interface.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30180
ThunderX is the only board known to use them.
Move them to the ThunderX PCIe driver.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30179
The vmbus ISR needs to live in a trampoline. Dynamically allocating a
trampoline at driver initialization time poses some difficulties due to
the fact that the KENTER macro assumes that the offset relative to
tramp_idleptd is fixed at static link time. Another problem is that
native_lapic_ipi_alloc() uses setidt(), which assumes a fixed trampoline
offset.
Rather than fight this, move the Hyper-V ISR to i386/exception.s. Add a
new HYPERV kernel option to make this optional, and configure it by
default on i386. This is sufficient to make use of vmbus(4) after the
4/4 split. Note that vmbus cannot be loaded dynamically and both the
HYPERV option and device must be configured together. I think this is
not too onerous a requirement, since vmbus(4) was previously
non-functional.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: whu, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30577
During boot we warn that the kbd and openfirm drivers are Giant-locked
and may be deleted. Generally, the warning helps signal that certain
old drivers are not being maintained and are subject to removal, but
this doesn't really apply to certain drivers which are harder to
detangle from Giant.
Add a flag, D_GIANTOK, that devices can specify to suppress the
misleading warning. Use it in the kbd and openfirm drivers.
Reviewed by: imp, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30649
Normally raw interrupt handler is provided by the kernel text. But
vmbus module registers its own handler that needs to be mapped into
userspace mapping on PTI kernels.
Reported and reviewed by: whu
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30310
pqisrc_is_firmware_feature_enabled shouldn't be declared inline in a
header, and then static inline in the .c function. Remove this stray
declartion from the header. gcc6 complains, but clang does not.
Sponsored by: Netflix
When a DMA chain can't be loaded, set the state to STATE_INQUEUE so that
the mp[rs]_complete_command can properly fail the command.
Sponsored by: Netflix
When the mpr(4) and mps(4) drivers probe a SATA device, they issue an
ATA Identify command (via mp{s,r}sas_get_sata_identify()) before the
target is fully setup in the driver. The drivers wait for completion of
the identify command, and have a 5 second timeout. If the timeout
fires, the command is marked with the SATA_ID_TIMEOUT flag so it can be
freed later.
That is where the use-after-free problem comes in. Once the ATA
Identify times out, the driver sends a target reset, and then frees any
identify commands that have timed out. But, once the target reset
completes, commands that were queued to the drive are returned to the
driver by the controller.
At that point, the driver (in mp{s,r}_intr_locked()) looks up the
command descriptor for that particular SMID, marks it CM_STATE_BUSY and
sends it on for completion handling.
The problem at this stage is that the command has already been freed,
and put on the free queue, so its state is CM_STATE_FREE. If INVARIANTS
are turned on, we get a panic as soon as this command is allocated,
because its state is no longer CM_STATE_FREE, but rather CM_STATE_BUSY.
So, the solution is to not free ATA Identify commands that get stuck
until they actually return from the controller. Hopefully this works
correctly on older firmware versions. If not, it could result in
commands hanging around indefinitely. But, the alternative is a
use-after-free panic or assertion (in the INVARIANTS case).
This also tightens up the state transitions between CM_STATE_FREE,
CM_STATE_BUSY and CM_STATE_INQUEUE, so that the state transitions happen
once, and we have assertions to make sure that commands are in the
correct state before transitioning to the next state. Also, for each
state assertion, we print out the current state of the command if it is
incorrect.
mp{s,r}.c: Add a new sysctl variable, dump_reqs_alltypes,
that controls the behavior of the dump_reqs sysctl.
If dump_reqs_alltypes is non-zero, it will dump
all commands, not just the commands that are in the
CM_STATE_INQUEUE state. (You can see the commands
that are in the queue by using mp{s,r}util debug
dumpreqs.)
Make sure that the INQUEUE -> BUSY state transition
happens in one place, the mp{s,r}_complete_command
routine.
mp{s,r}_sas.c: Make sure we print the current command type in
command state assertions.
mp{s,r}_sas_lsi.c:
Add a new completion handler,
mp{s,r}sas_ata_id_complete. This completion
handler will free data allocated for an ATA
Identify command and free the command structure.
In mp{s,r}_ata_id_timeout, do not set the command
state to CM_STATE_BUSY. The command is still in
queue in the controller. Since we were blocking
waiting for this command to complete, there was
no completion handler previously. Set the
completion handler, so that whenever the command
does come back, it will get freed properly.
Do not free ATA Identify commands that have timed
out in mp{s,r}sas_add_device(). Wait for them
to actually come back from the controller.
mp{s,r}var.h: Add a dump_reqs_alltypes variable for the new
dump_reqs_alltypes sysctl.
Make sure we print the current state for state
transition asserts.
This was tested in the Spectra Logic test bed (as described in the
review), as well Netflix's Open Connect fleet (where panics dropped from
a dozen or two a month to zero).
Reviewed by: imp@ (who is handling the commit with ken's OK)
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D25476
Use the accessor function to get the softc for this sim. This also drops
an unneeded cast.
Sponsored by: Netflix
Reviewed by: mav@, hselasky@
Differential Revision: https://reviews.freebsd.org/D30360
if (sb == NULL) { ... sb->s_error } is going to be a bad time. Return
ENOMEM when we cannot allocate an sbuf for the sysctl rather than
dereferencing the NULL pointer just returned.
Reviewed by: manu@, allanjude@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30373
The need for !! over (bool) pre-dates gcc 4.2, so go with the patch
as-submitted because the kernel tends to prefer that.
Suggested by: emaste@
Sponsored by: Netflix
Currently, mmc_fdt_gpio_get_{present,readonly} return all time true.
true ^ 100b = true
false ^ 100b = true
since that's done after promotion to integers. Use !! to convert
the bit to a bool before xor.
Reviewed by: imp@ (converted to (bool) to !! for portability)
Pull Request: https://github.com/freebsd/freebsd-src/pull/461
Update mmc_switch_status to ignore a few CRC errrors when asking for the
card status after setting the new rate with CMD6. Since the card may
take a little while to make the switch, it's possible we'll get a
communications error if we sent the command at the wrong time. Several
low end laptops needs this workaround as they have a window that seems
longer than other systems. This is known to fix at least the Acer Aspire
A114-32-P7E5.
Reviewed by: imp@, manu@
Differential Revision: https://reviews.freebsd.org/D24740
This patch adds the necessary methods resolution to the sdhci_xenon
driver which are required to configure UHS modes for SD/MMC devices.
Apart from the two generic routines, the custom sdhci_xenon_set_uhs_timing
function is responsible for setting the SDHCI_HOST_CONTROL2 register
with appropriate mode select values - in case of HS200 and HS400
they are non-standard.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30565
MFC after: 2 weeks
Improve the VCCQ voltage switch, so that to properly
handle the SDHCI_HOST_CONTROL2 register signaling
flags and along with manipulating the regulator.
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Marvell
Differential Revision: https://reviews.freebsd.org/D30564
MFC after: 2 weeks
