The device mapping table contains sc->max_devices entries, so only
indices in [0, sc->max_devices) are valid.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27964
Previously we copied in the request into a stack-allocated structure
that could be smaller than the request size. Furthermore, we checked
the request size only after doing the copyin.
Fix this by allocating a buffer to hold the request, then copying the
buffer's contents into a command descriptor. This is a bit heavy-handed
but I expect the overhead will not be noticeable. The approach of
coping the header in first is susceptible to TOCTOU problems.
Reviewed by: imp
Reported by: maxpl0it@protonmail.com
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27963
safexcel_ring_intr() could fail to observed that sc_blocked is set after
completing all outstanding ops for a ring, in which case blocked ops
would be deferred forever.
Request structures are managed by individual rings, so move the
"blocked" flag into the per-ring state block and use the ring lock to
synchronize with safexcel_process(). Remove sc_mtx since it is now
unused.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
mtx_init() does not make a copy of the name so the buffer must be valid
for the lifetime of the driver instance. Store each ring's lock's name
in the ring structure.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
The new UAR API already offsets the UAR map pointer the mlx5en(4) is using.
While at it remove some no longer needed variables for keeping track
of the current BF offset.
This fixes a regression issue after the new UAR allocation APIs
were introduced.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Add decoding of the Device Self-test log page and the ability to start
or abort a test.
Reviewed by: imp, mav
Tested by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27517
This ioctl would instantly induce a panic, likely since near inception, up
until 0861c7d3e0. Lack of previous interest in fixing it combined with
the problematic interface (exports a pointer, really a physical address)
brings us to the natural conclusion: remove it until a useful consumer
forward.
If it eventually gets resurrected, the interface should definitely not
return in this exact form and likely needs to be reimagined.
The associated KPI, efi_get_table, is left intact for the time being.
Reviewed by: imp, jrtc27
Also discussed with: brooks, jhb
Differential Revision: https://reviews.freebsd.org/D28030
Virtual PMCs could be running on multiple CPUs so this needs to be
a per-CPU value.
Submitted by: rwatson (earlier version)
Reviewed by: gnn
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27973
When testing hwpmc on arm64 we found the counter could overflow while
reading the event count. Handle this case in the armv7 code by also
checking if the overflow bit is set and incrementing the overflow
cound as needed.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27969
This change include several changes as listed below all related to UAR.
UAR is a special PCI memory area where the so-called doorbell register and
blue flame register live. Blue flame is a feature for sending small packets
more efficiently via a PCI memory page, instead of using PCI DMA.
- All structures and functions named xxx_uuars were renamed into xxx_bfreg.
- Remove partially implemented Blueflame support from mlx5en(4) and mlx5ib.
- Implement blue flame register allocator.
- Use blue flame register allocator in mlx5ib.
- A common UAR page is now allocated by the core to support doorbell register
writes for all of mlx5en and mlx5ib, instead of allocating one UAR per
sendqueue.
- Add support for DEVX query UAR.
- Add support for 4K UAR for libmlx5.
Linux commits:
7c043e908a74ae0a935037cdd984d0cb89b2b970
2f5ff26478adaff5ed9b7ad4079d6a710b5f27e7
0b80c14f009758cefeed0edff4f9141957964211
30aa60b3bd12bd79b5324b7b595bd3446ab24b52
5fe9dec0d045437e48f112b8fa705197bd7bc3c0
0118717583cda6f4f36092853ad0345e8150b286
a6d51b68611e98f05042ada662aed5dbe3279c1e
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
- call pci_iov_detach() on detaching from PCI device to take care of hang
on destroying VFs after PF is down.
- disable eswitch SRIOV support right after pci_iov_detach(),
else the eswitch cleanup sometimes occur while the SRIOV flow table
is still present.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This allows to mark HID-device interrupt handlers as MP-SAFE.
Atomics-based lockless key event queue with swi_giant taskqueue is used
to pass key-press events into Giant-protected system console.
Reviewed by: hselasky (as part of D27991)
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
