- Support for uncore counting events: one fixed PMC with the uncore
domain clock, 8 programmable PMC.
- Westmere based CPU (Xeon 5600, Corei7 980X) support.
- New man pages with events list for core and uncore.
- Updated Corei7 events with Intel 253669-033US December 2009 doc.
There is some removed events in the documentation, they have been
kept in the code but documented in the man page as obsolete.
- Offcore response events can be setup with rsp token.
Sponsored by: NETASQ
Provide groundwork for 32-bit binary compatibility on non-x86 platforms,
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
This MFC is required for MFCs of later changes to the freebsd32
compatibility from HEAD.
Requested by: kib
Add run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.
This driver was written for OpenBSD by Damien Bergamini and ported over by
Akinori Furukoshi.
r204271:
Accessing an mbuf after it has been handed off to the hardware is a bad
race as it could already have been tx'd and freed by that time. Place
the bpf tap just _before_ writing the gen bit.
This fixes a panic when running tcpdump on a cxgb interface.
r204274:
There is no need to test __FreeBSD_version for features that have
been around for a long time now (7.1-ish or even earlier); assume
they are present. These includes MSI, TSO, LRO, VLAN, INTR_FILTERS,
FIRMWARE, etc.
Also, eliminate some dead code and clean up in other places as part
of this quick once-over.
r204348:
Support IFCAP_VLANHWTSO in cxgb(4). It works with or without vlanhwtag.
While here, remove old DPRINTFs and tidy up the capability code a bit.
r204921:
Better TwinAx transceiver detection.
Originally submitted by: <Bruno dot Bittner at isilon dot com>
(This is a rewritten, corrected version of that patch)
r205944:
Refresh the firmware version immediately after it is upgraded (or downgraded).
r205945:
Improved PHY EDC settings.
r205946:
Do not attempt to retrieve interrupt information before it is available.
r205947:
Fix build with "nooptions INET"
r205948:
Fix tx drop statistics.
r205949:
Fix signed/unsigned mix-up that allowed txq->in_use to grow beyond txq->size.
r205950:
Multiple fixes related to queue set sizing and resources:
- Only the tunnelq (TXQ_ETH) requires a buf_ring, an ifq, and the watchdog/timer
callouts. Do not allocate these for the other tx queues.
- Use 16k jumbo clusters only on offload capable cards by default.
- Do not allocate a full tx ring for the offload queue if the card is not
offload capable.
- Slightly better freelist size calculation.
- Fix nmbjumbo4 typo, remove unneeded global variables.
r206109:
Increase response queue size to avoid starvation, add a counter
to track it when it does occur.
framebuffer driver, etc. work on FreeBSD/amd64.
A significant amount of improvements were done by jkim@ during the recent
months to make vesa(4) work better, over the initial code import. This
work is based on OpenBSD's x86emu implementation and contributed by
paradox <ddkprog yahoo com> and swell.k at gmail com.
Hopefully I have stolen all their work to 8-STABLE :)
All bugs in this commit are mine, as usual.
module so it's not present twice.
- Move nfs_realign() from the NFS client to the shared NFS code and
remove the NFS server version in order to reduce code duplication.
The shared version now uses a second parameter how, which is passed
on to m_get(9) and m_getcl(9) as the server used M_WAIT while the
client requires M_DONTWAIT, and replaces the the previously unused
parameter hsiz.
- Change nfs_realign() to use nfsm_aligned() so as with other NFS code
the alignment check isn't actually performed on platforms without
strict alignment requirements for performance reasons because as the
comment suggests unaligned data only occasionally occurs with TCP.
- Change fha_extract_info() to use nfs_realign() with M_DONTWAIT rather
than M_WAIT because it's called with the RPC sp_lock held.
Add a driver by Fredrik Lindberg for Option HSDPA USB devices. These differ
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.
Obtained from: Fredrik Lindberg <fli@shapeshifter.se>
After adding an SDT provider for opencrypto in r199884 we should also
depend on opt_kdtrace.h for the module build.
Submitted by: (Andre.Albsmeier siemens.com)
lindev(4) [1] is supposed to be a collection of linux-specific pseudo
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
Drop USB mass storage devices support from ata(4). It is out of the build as
long as I remember, and completely superseded by better maintained umass(4).
It's main idea was to optionally avoid CAM dependency for such devices, but
with move ATA to CAM, it is not actual any more.
No objections: hselasky@, thompsa@, arch@
unifdef NFSCLIENT because the nlm depends on the nfsclient even if NFSCLIENT
is not defined.
Now the nfslockd module works with the nfsclient module.
Reviewed by: kib
Approved by: re (kensmith)
Add '#define NFSCLIENT' into opt_nfs.h if the NFSCLIENT variable is 1
(the default is 1).
This makes the nfslockd module works for NFS client.
Reviewed by: dfr
Approved by: re (kib)
Remove OpenSolaris taskq port (it performs very poorly in our kernel) and
replace it with wrappers around our taskqueue(9).
To make it possible implement taskqueue_member() function which returns 1
if the given thread was created by the given taskqueue.
Approved by: re (kib)
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
Driver supports Serial ATA and ATAPI devices, Port Multipliers
(including FIS-based switching), hardware command queues (31 command
per port) and Native Command Queuing. This is probably the second on
popularity, after AHCI, type of SATA2 controllers, that benefits from
using CAM, because of hardware command queuing support.
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
