Although "create_srq_user" does overwrite "in.pas" on some paths, it
also contains at least one feasible path which does not overwrite it.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
"fw_rev_min(dev->mdev)" with type "unsigned short" (16 bits, unsigned) is
promoted in "fw_rev_min(dev->mdev) << 16" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"fw_rev_min(dev->mdev) << 16" is greater than 0x7FFFFFFF, the upper bits of the
result will all be 1.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Driver description should be set by core and not by the Ethernet driver.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
A command is either polling or event driven and the mode cannot change
during execution of a command. Make sure the event handler only handle
commands which are not polled. This is done by checking the command mode
in the command handler before completing commands.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
This counter will represent transmitted packets which has more than
1518 octets.
The NIC has multiple hardware counters for counting transmitted
packets larger than 1518 octets. Each counter counts the packets
in specific range.
We accumulate those counters to have a single counter.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.
Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
All other mlx5_events report the port number as 1 based, which is how FW
reports it in the port event EQE. Reporting 0 for this event causes
mlx5_ib to not raise a fatal event notification to registered clients
due to a seemingly invalid port.
All switch cases in mlx5_ib_event that go through the port check are
supposed to set the port now, so just do it once at variable
declaration.
Linux commit:
aba462134634b502d720e15b23154f21cfa277e5
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The user can provide very large cqe_size which will cause to integer
overflow.
Linux commit:
28e9091e3119933c38933cb8fc48d5618eb784c8
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Copy small packets like TCP ACKs into a new mbuf
reusing the existing mbuf to receive a new ethernet
frame. This avoids wasting buffer space for
small sized packets.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Adding an interface might be done outside the device_attach() routine
and will then cause a panic, due to the VNET not being defined.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The "priv->pkstats.rx_dropped" is written twice in a row.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also when the MTU is greater than MCLBYTES.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
Mark some buses as BUS_PASS_BUS, and some resources as BUS_PASS_RESOURCE.
This also decouples some resource attachment orderings from being races by
device tree ordering, instead relying on the bus pass to provide the
ordering.
This was originally intended to support multipass suspend/resume, but it's
also needed on PowerMacs when using fdt, as the device tree seems to get
created in reverse of the OFW tree.
Reviewed by: nwhitehorn (long ago)
Differential Revision: https://reviews.freebsd.org/D918
The object size is set in the dsp_mmap_single() which provides the
range limit by vm_fault().
Reported by: C Turt <ecturt@gmail.com>
Reviewed by: alc, markj
admbug: 781
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The type represents byte offset in the vm_object_t data space, which
does not span negative offsets in FreeBSD VM. The change matches byte
offset signess with the unsignedness of the vm_pindex_t which
represents the type of the page indexes in the objects.
This allows to remove the UOFF_TO_IDX() macro which was used when we
have to forcibly interpret the type as unsigned anyway. Also it fixes
a lot of implicit bugs in the device drivers d_mmap methods.
Reviewed by: alc, markj (previous version)
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Early processing of a packet on transmit may change last seen
VLAN TCI in the queue context. If such a packet is eventually
dropped, last seen VLAN TCI must be set to its previous value.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18288
If an event handler requested an abort, only the inner loop was
guarenteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18287
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18285
Correct annotations where NULL input can be permitted
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18284
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18283
In efx_mcdi_phy_module_get_info() probe the
transceiver identification byte rather than assume
the module matches the fixed port type. This
supports scenarios such as a SFP mounted in a QSFP
port via a QSA module.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18282
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18281
Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280
Limit the port mode bandwidth calculations by the maximum
reported link speed. This system detects 25G vs 10G cards,
and 100G port modes vs 40G.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18279
Change the interface to ef10_nic_get_port_mode_bandwidth()
so more NIC information can be used to infer bandwidth
requirements. Huntington calculations separated out
completely.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18278
Add cases for the new port modes supported by X2 NICs.
Lane bandwidth is calculated for pre-X2 cards so is an
underestimate for X2 in 25G/100G modes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18277
>From Medford onwards, the newer constants enumerating
port modes should be used.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18276
Adjust data types in interface to permit the complete
module information buffer to be obtained in a single
call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18275
Rearrange so the valid addresses are visible to the caller.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18274
