With the general removal of MIPS support there's no longer a need to
support these integrated switches.
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D41394
All of these are obsoleted by the general removal of MIPS support.
Actually, corresponding to the removed AH_SUPPORT_x, there is more
superfluous support sprinkled across the HAL source. However, that
code is left in place for now in order to ease a sync to NetBSD.
Reviewed by: emaste (w/ man page fix)
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D41355
Following the removal of general MIPS support, there's no longer a need
to have the AHB bus-frontend in place, which according to Linux sources
also isn't used with any non-MIPS SoCs. For simplicity, PCI bus support
is only made conditional on the main one again, i. e. device ath_pci is
removed, and built into the main module, i. e. if_ath_pci.ko obsoleted,
respectively.
Effectively, this reverts the following commits and associated changes:
dba9c85977e849bb3ecb
Approved by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D41354
The two bools in nvme_request create a 6 byte hole today. Move them to
after retires to fill the 4 byte hole there and add a spare[2] to make
nvme_request 8 bytes smaller. spare[2] isn't strictly necessary, but
documents how many bytes we have left in that hole, as the number of
booleans will increase shortly.
Suggested by: chuck
Sponsored by: Netflix
Because the 32-bit md_ioctl structure contains 64-bit members, arm
and powerpc add padding to a multiple of 8. i386 doesn't do this.
The md_ioctl32 definition was correct for amd64/i386 without padding,
but wrong for arm64 and powerpc64. Make __packed__ conditional on
__amd64__, and test for the expected size on non-amd64. Note that
mdconfig is used in the ATF test suite. Note, I verified the
structure size for powerpc, but was unable to test.
MFC after: 1 week
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D41339
Discussed with: jhibbits
We need i2c first to set it to MIDDLE, then we need one of the pmics
so set them to LATE, only then we can attach iodomain which needs some
regulators exposed by the pmic so set it to LAST.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Some SoCs have an external firmware doing power management, clock
and other stuffs. (Xilinx, ARM Juno etc ...)
The way it is represent in the DTB is usually having a 'firmware' node
under the root node and have some nodes under it with the correct
compatible strings.
The firmware node itself doesn't have any compatible strings.
This driver is simple subclassed from simplebus and attaches at
BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE so early drivers (like clock drivers)
can still have a change to attach early.
Reviewed by: andrew
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37612
During porting of etherswitch to NetBSD mistypo was discovered in
Atheros switch version detection.
Reported by: Hiroki Mori yamori813@yahoo.co.jp
MFC after: 1 week
Rather than have a table to walk through, use a sparse array.
Suggested by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D41353
Fix comment to note we should grab additional data from the error log
page, but don't currently (it's inclear if we should do that here
and other places in nvd that want it, or if we should let nvd / the
nda periph make the request).
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41315
When manually completing an I/O, we do so because we have no status back
from the card. Note M, CRD and P are all 0 because this is an artificial
event (and phase isn't checked when it's completed this way). There's no
MORE information in the error log page and there's no delayed retry
(CRD=0) and we don't currently request CRD to be set to anything other
than 0 and thus don't implement delayed retry.
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41314
When we're resetting, and there's outstanding I/O that we're cancelling,
only report we're cancelling the I/O once rather than once per
I/O. Likewise when we reschedule the I/O. We don't need to say for each
one that we're cancelling/rescheduling something, and then report the
I/O that we're doing. Likewise with cancelling admin commands (we never
retry them here, so a similar change isn't needed).
Sponsored by: Netflix
Reviewed by: chuck, mav
Differential Revision: https://reviews.freebsd.org/D41313
get_admin_opcode_string and get_io_opcode_string are identical, but
start with different tables. Use a helper routine that takes an argument
to implement these instead. A future commit will refine this further.
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41310
Both nvme_dump_command and nvme_qpair_print_command print nvme
commands. The former latter better. Recode the one call to
nvme_dump_command to use nvme_qpair_print_command and delete the
former. No sense having two nearly identical routines. A future commit
will convert to sbuf.
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41309
Both nvme_dump_completion and nvme_qpair_print_completion print
completions. The latter is better. Recode the two instances of
nvme_dump_completion to use nvme_qpair_print_completion and delete the
former. No sense having two nearly identical routines. A future commit
will convert this to sbuf.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D41308
In commit c77bfaa750 uhid(4) gained support for ioctl from
USB_GET_DEVICEINFO. This is used in libraries like libfido2 to
retrieve information about a device.
This commit adds binary compatible version to hidraw(4).
PR: 264843
MFC after: 1 month
Requested by: grembo
Most em(4) devices now enjoy TSO and TSO6, matching NetBSD and Linux
defaults.
A prior commit automasks TSO on 10/100 Ethernet due to errata and other
bugs for IPv6 were fixed recently allowing this.
Mike Karels identified a performance anomaly on Intel 82574L devices.
These are multiqueue enabled on FreeBSD since the conversion to
iflib. I am investigating whether this can be fixed, in the mean time
MSI-X with checksum offloads remain default.
i219 SPT devices have an errata that downclocks the DMA engine, which
results in TSO not being able to acheive line rate. Therefore, it is
disabled on:
* Intel(R) I219-LM and I219-V SPT
* Intel(R) I219-LM and I219-V SPT-H (2)
* Intel(R) I219-LM and I219-V LBG (3)
* Intel(R) I219-LM and I219-V SPT (4)
* Intel(R) I219-LM and I219-V SPT (5)
Many lem(4) devices enjoy TSO, exceptions being 82542, 82543, 82547.
TSO6 may be possible for some chipsets but I am still working through
my testing matrix and that is hidden behind hw.em.unsupported_tso.
If you encounter issues, you may disable TSO with for example:
ifconfig em0 -tso -tso6.
I ask to be informed of any deviations from normal operation requiring
this.
Thanks to cc@ for access to emulab.net.
On a sample I219 system it saves about 16% CPU on IPv4 and 19% on IPv6.
iperf3 -Vc reported numbers:
total% user% system%
IPv4 TSO
21.3 7 14.4
21.4 6 15.4
21.5 6 15.5
IPv4 no TSO
36.8 5.4 31.4
38.5 5.1 33.5
38.2 5.7 32.6
IPv4 no TSO no TXCSUM
45.1 5.8 39.3
46 6.3 39.7
46.2 5.9 40.4
IPv6 TSO6
21.7 5.4 16.3
21.6 5.1 16.5
21.9 5.6 16.3
IPv6 no TSO6
41.2 5.2 36
41 5.1 36
40.8 5.2 35.7
IPv6 no TSO6 no TXCSUM6
49 5.9 43.1
48.8 4.9 43.9
49 5.6 43.4
Tested by: cc (lem(4)), karels (82574L)
MFC after: 3 months
Relnotes: yes
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41170
The vlan setting is independent for each interface. Use VFTA table in
'struct ixgbe_softc' that is already defined.
This pull request fixes following bug scenario.
create ixv0.10
create ixv1.10
destroy ixv1.10
create ixv0.11
ixv0.10 no longer receives vlan 10 packets.
In this case, destroying ixv1.10 affects to ixv0.
MFC after: 1 week
Pull Request: https://github.com/freebsd/freebsd-src/pull/774
When spibus is attached as child of Intel SPI controller it scans all
ACPI nodes for "SPI Serial Bus Connection Resource Descriptor" described
in section 19.6.126 of ACPI specs.
If such a descriptor is found, SPI child is added to spibus, it's SPI
chip select, mode, clock, IRQ resource and ACPI handle are added to ivars.
Existing ACPI bus-hosted child is deleted afterwards.
Apple ACPI SPI extensions are supported.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41248
Required for Apple and Microsoft -compatible HID-over-SPI drivers.
Most logic was already implemented in commit 3c08673438
"spibus: extend API: add cs_delay ivar, KEEP_CS and NO_SLEEP flags".
It dissallowed driver sleeps in the interrupt context. This commit
extends this feature to handle ddb/kdb context with following:
- Skip driver locking if SPI functions were called from kdb/ddb.
- Reinitialize controller if kdb/ddb initiated SPI transfer has
interrupted another already running one. Does not work very
reliable yet.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41247
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
IRQ Resource is allocated on spibus(4). We must release it here too
rather than propagate request down the tree.
Fixes: 4dd8db62e9 ("Add IRQ resource to SPIBUS")
MFC after: 1 week
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41243
Free allocated per-CPU structures in the pcpu_fini and finalize methods.
While here, add debug trace entries to these methods.
Reviewed by: jkoshy, andrew
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41269
Free allocated per-CPU structures in the pcpu_fini and finalize methods.
While here, add debug trace entries to these methods.
Reviewed by: jkoshy, andrew
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41268
The driver belabors the point about unsupported SFPs, printing multiple
times on link up. Limit it to once.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39785
This feature masks TSO capability when a link comes up at 10 or 100mbit
due to errata on the chips. This behavior matches previous versions of
FreeBSD as well as NetBSD and Linux.
A tunable, hw.em.unsupported_tso may be set if the admin desires to
disabling automasking and configure TSO settings manually.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41170
Adds support for detection of the S3X NVMe controller found in the
13" MacBook Pro 2017 without Touch Bar (MacBook14,1)
It is known to be used in following MacBooks:
- Retina MacBook 2016 (MacBook9,1)
- 13" MacBook Pro 2016 without Touch Bar (MacBook13,1)
- 13" MacBook Pro 2016 with Touch Bar (MacBook13,2)
Also disable IPV6 checksum offload.
Spell hw->mac.type < e1000_82543 as e1000_82542. Confusingly, chips
like 82540 and 82541 come later and do not have these issues. There
is no functional change here, as the enum was defined in such a way
it worked correctly. But this reads literally.
MFC after: 1 week
Currently for the MFS, firmware and VDSO template assembly files we pass
the path to include with .incbin unquoted and use __XSTRING within the
assembly file to stringify it. However, __XSTRING doesn't just perform a
single level of expansion, it performs the normal full expansion of the
macro, and so if the path itself happens to tokenise to something that
includes a defined macro in it that will itself be substituted. For
example, with #define MACRO 1, a path like /path/containing/MACRO/in/it
will expand to /path/containing/1/in/it and then, when stringified, end
up as "/path/containing/1/in/it", not the intended string. Normally,
macros have names that start or end witih underscores and are unlikely
to appear in a tokenised path (even if technically they could), but now
that we've switched to GNU C as of commit ec41a96daa ("sys: Switch the
kernel's C standard from C99 to GNU99.") there are a few new macros
defined which don't start or end with underscores: unix, which is always
defined to 1, and i386, which is defined to 1 on i386. The former
probably doesn't appear in user paths in practice, but the latter has
been seen to and is likely quite common in the wild.
Fix this by defining the macro pre-quoted instead of using __XSTRING.
Note that technically we don't need to do this for vdso_wrap.S today as
all the paths passed to it are safe file names with no user-controlled
prefix but we should do it anyway for consistency and robustness against
future changes.
This allows make tinderbox to pass when built with source and object
directories inside ~/path-with-unix, which would otherwise expand to
~/path-with-1 and break.
PR: 272744
Fixes: ec41a96daa ("sys: Switch the kernel's C standard from C99 to GNU99.")
