Receive Segment Coalescing (RSC) in the vSwitch is a feature available in
Windows Server 2019 hosts and later. It reduces the per packet processing
overhead by coalescing multiple TCP segments when possible. This happens
mostly when TCP traffics are among different guests on same host.
This patch adds netvsc driver support for this feature.
The patch also updates NVS version to 6.1 as needed for RSC
enablement.
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D29075
nvme drives are configured early in boot. However, a number of the configuration
steps takes which take a while, so we defer those to a config intrhook that runs
before the root filesystem is mounted. At the same time, the PCI hot plug wakes
up and tests the status of the card. It may decide that the card has gone away
and deletes the child. As part of that process nvme_detach is called. If this
call happens after the config_intrhook starts to run, but before it is finished,
there's a race where we can tear down the device's soft state while the
config_intrhook is still using it. Use the new config_intrhook_drain to
disestablish the hook. Either it will be removed w/o running, or the routine
will wait for it to finish. This closes the race and allows safe hotplug at any
time, even very early in boot.
Sponsored by: Netflix, Inc
Reviewed by: jhb, mav
Differential Revision: https://reviews.freebsd.org/D29006
The pwm utility cant set the only flag defined (PWM_POLARITY_INVERTED) so this
patch add the option -I (capital letter i) to send it to the drivers.
None of existing PWM driver have implemented support for flags.
But soon:ish I will put up an review of a pwm driver using TI OMAP DMTimer.
Differential Revision: https://reviews.freebsd.org/D29137
MFC after: 2 weeks
Fix the types of period and duty in share/man/man9/pwmbus.9 to match the one in sys/dev/pmw/pwmbus.c.
Reviewed By: rpokala
Differential Revision: https://reviews.freebsd.org/D29139
MFC after: 3 days
We don't need the result before next sleep time, so no reason to
additionally increase interrupt latency.
While there, remove extra PM ticks to microseconds conversion, making
C2/C3 sleep times look 4 times smaller than really. The conversion
is already done by AcpiGetTimerDuration(). Now I see reported sleep
times up to 0.5s, just as expected for planned 2 wakeups per second.
MFC after: 1 month
It has been observed that some systems are often unable to resume from
ddb after entering with debug.kdb.enter=1. Checking the status further
shows the terminal is blocked waiting in tty_drain(), but it never makes
progress in clearing the output queue, because sc->sc_txbusy is high.
I noticed that when entering polling mode for the debugger, IER_TXRDY is
set in the failure case. Since this bit is never tracked by the softc,
it will not be restored by ns8250_bus_ungrab(). This creates a race in
which a TX interrupt can be lost, creating the hang described above.
Ensuring that this bit is restored is enough to prevent this, and resume
from ddb as expected.
The solution is to track this bit in the sc->ier field, for the same
lifetime that TX interrupts are enabled.
PR: 223917, 240122
Reviewed by: imp, manu
Tested by: bz
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29130
The names are self-explanatory; these are currently only used by the
wg(8) tool, but they are handy data points to have.
Reviewed by: grehan
MFC after: 3 days
Discussed with: decke
Differential Revision: https://reviews.freebsd.org/D29143
We have no use for the udphdr or this hlen local, just spell out the
addition inline.
MFC after: 3 days
Reviewed by: grehan, markj
Differential Revision: https://reviews.freebsd.org/D29142
Some framebuffer properties obtained from the device tree were not being
properly converted to host endian.
Replace OF_getprop calls by OF_getencprop where needed to fix this.
This fixes boot on PowerPC64 LE, when using ofwfb as the system console.
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27475
The kernel-side already accepted a persistent-keepalive-interval, so
just add a verb to ifconfig(8) for it and start exporting it so that
ifconfig(8) can view it.
PR: 253790
MFC after: 3 days
Discussed with: decke
No sleeping allowed here, so avoid it. Collect the subset of data we
want inside of the epoch, as we'll need extra allocations when we add
items to the nvlist.
Reviewed by: grehan (earlier version), markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29124
This partially reverts df55485085 but still fixes the leak. It was
overlooked (sigh) that some packets will exceed MHLEN and cannot be
physically contiguous without clustering, but we don't actually need
it to be. m_defrag() should pull up enough for any of the headers that
we do need to be accessible.
Fixes: df55485085
Pointy hat; kevans
When we enter C2+ state via memory read, it may take chipset some
time to stop CPU. Extra register read covers that time. But MWAIT
makes CPU stop immediately, so we don't need to waste time after
wakeup with interrupts still disabled, increasing latency.
On my system it reduces ping localhost latency, waking up all CPUs
once a second, from 277us to 242us.
MFC after: 1 month
Even though the information is very limited, it seems the intent of
this flag is to control ACPI_BITREG_BUS_MASTER_STATUS use for C3,
not force ACPI_BITREG_ARB_DISABLE manipulations for C2, where it was
never needed, and which register not really doing anything for years.
It wasted lots of CPU time on congested global ACPI hardware lock
when many CPU cores were trying to enter/exit deep C-states same time.
On idle 80-core system it pushed ping localhost latency up to 20ms,
since badport_bandlim() via counter_ratecheck() wakes up all CPUs
same time once a second just to synchronously reset the counters.
Now enabling C-states increases the latency from 0.1 to just 0.25ms.
Discussed with: kib
MFC after: 1 month
This structure is shared among multiple instances of a driver, so we
should ensure that it doesn't somehow get treated as if there's a
separate instance per interface. This is especially important for
software-only drivers like wg.
DEVICE_REGISTER() still returns a void * and so the per-driver sctx
structures are not yet defined with the const qualifier.
Reviewed by: gallatin, erj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29102
ath_hal is compiled into the kernel by default and so always prints a
message to dmesg even when the system has no ath hardware.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This updates the driver to align with the version included in
the "Intel Ethernet Adapter Complete Driver Pack", version 25.6.
There are no major functional changes; this mostly contains
bug fixes and changes to prepare for new features. This version
of the driver uses the previously committed ice_ddp package
1.3.19.0.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28640
netmap is compiled into the kernel by default so initialization was
always reported, and netmap uses a formatting convention not used in the
rest of the kernel.
Reviewed by: vmaffione
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29099
Firmware access from t4_attach takes place without any synchronization.
The driver should not panic (debug kernels) if something goes wrong in
early communication with the firmware. It should still load so that
it's possible to poke around with cxgbetool.
MFC after: 1 week
Sponsored by: Chelsio Communications
When rx packet contains hash value sent from host, store it in
the mbuf's flowid field so when the same mbuf is on the tx path,
the hash value can be used by the host to determine the outgoing
network queue.
MFC after: 2 weeks
Sponsored by: Microsoft
It closes tiny race when the flag could be set between being cleared
and the space is checked, that would create us some more work. The
flag setting is protected by both locks, so we can clear it in either
place, but in between both locks are dropped.
MFC after: 1 week
I think it allowed to avoid some TX thread wakeups while the socket
buffer is full. But add there another options if ic_check_send_space
is set, which means socket just reported that new space appeared, so
it may have sense to pull more data from ic_to_send for better TX
coalescing.
MFC after: 1 week
Add sysctl link_active_on_if_down, which allows user to control
if interface is kept in active state when it is brought
down with ifconfig. Set it to enabled by default to preserve
backwards compatibility.
Reviewed by: erj
Tested by: gowtham.kumar.ks@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28028
HW keeps track of RX errors using several counters, each for
specific type of errors. Report RX errors to OS as sum
of all those counters: CRC errors, illegal bytes, checksum,
length, undersize, fragment, oversize and jabber errors.
There is no HW counter for frames with invalid L3/L4 checksums
so add a SW one.
Also add a "rx_errors" sysctl with a copy of netstat IERRORS
counter value to make it easier accessible from scripts.
Reviewed By: erj
Tested By: gowtham.kumar.ks@intel.com
Sponsored By: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D27639
HW keeps track of RX errors using several counters, each for
specific type of errors. Report RX errors to OS as sum
of all those counters: CRC errors, illegal bytes, checksum,
length, undersize, fragment, oversize and jabber errors.
Also, add new "rx_errs" sysctl in the dev.ix.N.mac_stats tree. This is
to provide an another way to display the sum of RX errors.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed By: erj
Tested By: gowtham.kumar.ks@intel.com
Sponsored By: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D27191
This fixes mpr driver on big-endian devices.
Tested on powerpc64 and powerpc64le targets using a SAS9300-8i card
(LSISAS3008 pci vendor=0x1000 device=0x0097)
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, Sreekanth Reddy <sreekanth.reddy@broadcom.com> (by email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25785
Merge the following fixes from https://github.com/pfsense/FreeBSD-src
1940e7d3 Save address of ingress packets to allow wg to work on HA
8f5531f1 Fix connection to IPv6 endpoint
825ed9ee Fix tcpdump for wg IPv6 rx tunnel traffic
2ec232d3 Fix issue with replying to INITIATION messages in server mode
ec77593a Return immediately in wg_init if in DETACH'd state
0f0dde6f Remove unnecessary wg debug printf on transmit
2766dc94 Detect and fix case in wg_init() where sockets weren't cleaned up
b62cc7ac Close the UDP tunnel sockets when the interface has been stopped
Reviewed by: kevans
Obtained from: pfSense 2.5
MFC after: 3 days
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28962
Mainly link errors interrupts should only be activated on fully linked port,
otherwise noise on lanes can cause livelock. But we don't have error
counters yet, so leave these interrupts disabled.
PAT_WRITE_BACK is x86-only, whereas sys/dev/xen could be shared
between multiple architectures.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D28831
In the Neoverse N1 SDP PCIe driver we need to map a page shared
between the firmware and the kernel. Previously we would use
pmap_kenter for this, however as this is not standardised between
architectures switch to the common pmap_qenter.
While here fix the error handling code to clean up on failure.
Reviewed by: br
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28890
Make the pwm_backlight module depend on backlight, so it
has access to the backlight interface symbols. Otherwise you'll
get an error like:
link_elf: symbol backlight_get_info_desc undefined
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
MFC after: 3 days
PR: 253765
