support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
file. Correct visibility conditions and order blocks of declarations
in order of increasing inclusiveness. Note that [v]snprintf() is now
in ISO C and f{seek,tell}o() are now in POSIX. Deprecated getw() and
putw() are no longer visible in XSH6 namespace (and should probably
be removed from BSD namespace as well).
hardly MD, since all our platforms share the same macro. It's not
really compiler dependent either, but this helps in reducing
<machine/ansi.h> to only type definitions.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
Since they were never documented and have never appeared in a FreeBSD
release, no repo-copy of the header is done. This removes namespace
pollution from <time.h>.
instead, add typedefs of only gid_t, time_t, and uid_t.
o Remove an unneeded conditional that hid macros that are in the
implementation namespace and therefore don't need to be hidden when
_POSIX_SOURCE is defined.
o Adjust some conditionals for compatibility with X/Open and POSIX.
o Note missing functions getpwnam_r() and getpwuid_r().
__dlfunc_t to dlfunc_t to match what I have proposed to the Austin
Group. (This also makes it easier for applications to store these
values before they decide what to do with them, e.g., in a wrapper
function.)
Add new dlfunc() interface, which is a version of dlsym() with a
return type that can be cast to a function pointer without turning
your computer into a frog.
Reviewed by: freebsd-standards
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
environment needed at boot time to a dynamic subsystem when VM is
up. The dynamic kernel environment is protected by an sx lock.
This adds some new functions to manipulate the kernel environment :
freeenv(), setenv(), unsetenv() and testenv(). freeenv() has to be
called after every getenv() when you have finished using the string.
testenv() only tests if an environment variable is present, and
doesn't require a freeenv() call. setenv() and unsetenv() are self
explanatory.
The kenv(2) syscall exports these new functionalities to userland,
mainly for kenv(1).
Reviewed by: peter
has been requested.
Unconditionalize the definition of INET_ADDRSTRLEN and
INET6_ADDRSTRLEN. Doing this helps expose bogus redefinitions in 3rd
party software.
<strings.h>, based on POSIX.1-2001's requirements.
o Add 'restrict' qualifier (spelled '__restrict') to functions in
<string.h>, as per C99 and POSIX.1-2001.
o Properly expose new POSIX.1-2001 functions in <string.h>.
MI, not required to be a fixed size, and used in multiple headers.
This will grow in time, as more things move here from <sys/types.h>
and <machine/ansi.h>.
o Add missing type definitions (uint16_t and uint32_t) to
<arpa/inet.h> and <netinet/in.h>.
o Reduce pollution in <sys/types.h> by using `#if _FOO_T_DECLARED'
widgets to avoid including <sys/stdint.h>.
o Add some missing type definitions to <unistd.h> and note the ones
that still need to be added.
o Make use of <sys/_types.h> primitives in <grp.h> and <sys/types.h>.
Reviewed by: bde
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
# This appears to not break X11, but I'm having problems compiling the
# glide part of the server with or without this patch, so I can't tell
# for sure.
for POSIX.1-2001 conformance.
o Add magic to <netinet/in.h> and <netinet6/in6.h> to prevent
redefining INET_ADDRSTRLEN and INET6_ADDRSTRLEN.
o Add a note about missing typedefs in <arpa/inet.h>.
o In i386's <machine/endian.h>, macros have some advantages over
inlines, so change some inlines to macros.
o In i386's <machine/endian.h>, ungarbage collect word_swap_int()
(previously __uint16_swap_uint32), it has some uses on i386's with
PDP endianness.
Submitted by: bde
o Move a comment up in <machine/endian.h> that was accidentially moved
down a few revisions ago.
o Reenable userland's use of optimized inline-asm versions of
byteorder(3) functions.
o Fix ordering of prototypes vs. redefinition of byteorder(3)
functions, so that the non-GCC (libc asm) case has proper
prototypes.
o Add proper prototypes for byteorder(3) functions in <sys/param.h>.
o Prevent redundant duplicate prototypes by making use of the
_BYTEORDER_PROTOTYPED define.
o Move the bswap16(), bswap32(), bswap64() C functions into MD space
for platforms in which asm versions don't exist. This significantly
reduces the complexity of some things at the cost of duplicate code.
Reviewed by: bde
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
Move group_from_gid to grp.h
Remove from stdlib.h
Make the prototypes match the code
Fix rm and mv to include new files.
NetBSD has these defined in those files, and others too that I've not
done.
Approved by: terminal room kabal
Reviewed by: jhb, phk
change prototypes to be the same as in the original sun tirpc code.
Remove ()P macro in a file where the mayority had ()P already removed.
Add them if the mayority use ()P macros.
Submitted by: mbr
Requested by: bde
compile issues. std::isspace(' ') was expanding to std::(!!_maskrune...)
which would cause a C++ compile error. Making __istype() an inline
causes the expansion to be std::__istype() instead, which is valid.
Reviewed by: jkh
and sbrk's prototype from char *sbrk(int) to void *sbrk(intptr_t).
This makes us more consistant with NetBSD and standards which include
these functions. Bruce pointed out that ptrdiff_t would probably
have been better than intptr_t, but this doesn't match other
implimentations.
Also remove local declarations of sbrk and unnecessary casting.
PR: 32296
Tested by: Harti Brandt <brandt@fokus.gmd.de>
MFC after: 1 month
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
We'll never install math.h wrapped by this define since msun's math.h
is using, so it should be removed from the source tree at some point
(after merge of useful stuff to msun's math.h which is installing now
to /usr/include)
Reviewed by: bde
o Hide nonstandard functions and types in <netinet/in.h> when
_POSIX_SOURCE is defined.
o Add some missing types (required by POSIX.1-200x) to <netinet/in.h>.
o Restore vendor ID from Rev 1.1 in <netinet/in.h> and make use of new
__FBSDID() macro.
o Fix some miscellaneous issues in <arpa/inet.h>.
o Correct final argument for the inet_ntop() function (POSIX.1-200x).
o Get rid of the namespace pollution from <sys/types.h> in
<arpa/inet.h>.
Reviewed by: fenner
Partially submitted by: bde
the following functions in the following commits:
- atoll() in revs 1.23-1.25
- llabs() and lldiv() in revs 1.22
- strtoq() and strtouq() in revs 1.18
C99 functions must not be declared in C90/POSIX.1-1990 sections, and
"long long" must not be exposed to compilers that don't support it.
Fixed style bugs (mainly misindentation and disorder) related the
following functions in the following commits:
- atoll() in revs 1.23-1.25
- getprogname() in rev.1.21
- sranddev() in revs 1.19-1.20
- strtoq() and strtouq() in rev.1.13
- user_from_uid() in rev.1.1
Breakage of K&R and C90 support used to be avoided by conditializing the
"long long"s for strtoq() and strtouq() on __STRICT_ANSI__, but the
conditionals should have gone away in rev.1.13 when the "long long"s went
away (the problem was moved to the places that declare quad_t and u_quad_t).
includes changing a struct timeval to an explicit structure of two
int32_t's. This requires using temporary timevals in several places
when calling gettimeofday(), settimeofday(), etc. With this timed now
works properly on 64-bit platforms such as Alpha.
Obtained from: NetBSD
o Make <stdint.h> a symbolic link to <sys/stdint.h>.
o Move most of <sys/inttypes.h> into <sys/stdint.h>, as per C99.
o Remove <sys/inttypes.h>.
o Adjust includes in sys/types.h and boot/efi/include/ia64/efibind.h
to reflect new location of integer types in <sys/stdint.h>.
o Remove previously symbolicly linked <inttypes.h>, instead create a
new file.
o Add MD headers <machine/_inttypes.h> from NetBSD.
o Include <sys/stdint.h> in <inttypes.h>, as required by C99; and
include <machine/_inttypes.h> in <inttypes.h>, to fill in the
remaining requirements for <inttypes.h>.
o Add additional integer types in <machine/ansi.h> and
<machine/limits.h> which are included via <sys/stdint.h>.
Partially obtain from: NetBSD
Tested on: alpha, i386
Discussed on: freebsd-standards@bostonradio.org
Reviewed by: bde, fenner, obrien, wollman
header for the case where sizeof(time_t) != sizeof(int). dumprestore.h
was embedding time_t when it should have been embedding int32_t.
Use time_to_time32() and time32_to_time() to convert between the
protocoll/file-format time and time_t.
serve two purposes: (1) so we can maintain backwards compatibility with
protocols (rwhod, dump, etc...) that either assume time_t is 32 bits or
assume sizeof(time_t) == sizeof(int), or make other similar assumptions.
(2) To tag such routines (by the presence of these calls) for future
cleanup/extension work.
The 32->64 routine, time32_to_time() (when time_t is 64 bits, that is),
is defined specifically to implement temporal locality to properly set the
msb bits of a 64 bit time_t quantity, using the 50 year rule. The locality
code has not been implemented yet (and doesn't need to be for a while),
but that is the intent. This will allow us to maintain backwards protocol
compatibility past 2038.
These routines are intended to be platform and time_t agnostic.
MFC after: 1 week
number of characters that are searched. This is especially useful
with file operations and non-NUL terminated strings.
Silence from: -audit, -hackers
MFC after: 5 days
<machine/ansi.h> for the definition of __signed, unless the compiler
is gcc.
Moved the declaration of socklen_t up together with the declaration of
size_t, and removed low-quality comment about this declaration. Declaring
socklen_t in this file is normal in POSIX-1.200x, unlike declaring size_t.
- only declare the application symbols specified in Posix.1-200x drafts,
not everything in <sys/types.h> and <stddef.h>.
- don't use the application symbol 'm' for an arg name.
for negotiation of timeout and file size to the tftp protocol. This
is required by some firmware like EFI boot managers (at least on
HP i2000 Itanium servers) in order to boot an image using tftp. The
attached patch implements the RFC, and in doing so also implements
RFC2347; a generic tftp option extension.
PR: 30710
Submitted by: Espen Skoglund <esk@ira.uka.de>
switch over to using a future-proof stdin/out/err.
Note that if you run 4.x binaries on your system, you will certainly
want to update /usr/lib/compat/libc.so.4. The easiest way is to
add "COMPAT4X= yes" in your /etc/make.conf.
now prototyped indirectly in <arpa/inet.h>.
o Deprecate in_addr_t and in_port_t typedefs in <sys/types.h>, these
are now typedef'd in <arpa/inet.h>.
Discussed with: bde
PR: 29946
socket option for the Unix domain. It's weaker than the
socket option (this only returns the uid and gid, while the
socket opt. can return the entire group list), and is
implemented mostly for compatibility with OpenBSD.
It was foiled because of dynamic copy relocations that caused compile-time
space to be reserved in .bss and at run time a blob of data was copied to
that space and everything used the .bss version.. The problem is that
the space is reserved at compile time, not runtime... So we *still* could
not change the size of FILE. Sigh. :-(
Replace it with something that does actually work and really does let us
make 'FILE' extendable. It also happens to be the same as Linux does in
glibc, but has the slight cost of a pointer. Note that this is the
same cost that 'fp = fopen(), fprintf(fp, ...); fclose(fp);' has.
Fortunately, actual references to stdin/out/err are not all that common
since we have implicit stdin/out/err-using versions of functions
(printf() vs. fprintf()).
with NetBSD and OpenBSD. glob(3) will now return GLOB_NOSPACE with
errno set to 0 instead of GLOB_LIMIT when we match more than `gl_matchc'
patterns. GLOB_MAXPATH has been left as an alias of GLOB_LIMIT to
maintain backwards compatibility.
Reviewed by: sheldonh, assar
Obtained from: NetBSD/OpenBSD
be malloc()ed, but they are now allocated using mmap(), just as the
default-size stacks are. A separate cache of stacks is kept for
non-default-size stacks.
Collaboration with: deischen
whether or not connect(2) is used for UDP client sockets. The default
is not to connect(), so existing clients will see no change in
behaviour.
The use of connect(2) for UDP clients has a number of advantages:
only replies from the intended address are received, and ICMP errors
pertaining to the connection are reported back to the application.
and its associated constants. Implement _SC_IOV_MAX in the usual way.
Be a bit sloppy about the namespace question; this should get cleared up
in time for 5.0.
MFC after: 1 month
to fix the "-nostdinc WARNS=X" breakage caused by broken prototypes
for cabs() and cabsl() in <math.h>.
Reimplemented cabs() and cabsl() using new complex numbers types and
moved prototypes from <math.h> to <complex.h>.
IPv6 transport-ready resolvers/DNS servers. Need careful configuration
when enable it. (default config is not affected).
See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be
called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
The STLport will probably become broken again, but I'll work on fixing it
later.
I wish someone would explain why the NetBSD Cirtus branch has the types
in their stddef.h...
Requested by: bde, ru
PR: 27606
Submitted by: Naohiko Tsuji <yakisoba@f2.dion.ne.jp>
Removal of LSYMSUBDIRS was a regression.
The purpose of LSYMSUBDIRS is to export only those /sys headers in the
SHARED=symlinks case that are also visible in the SHARED=copies case.
Requested by: bde
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
arguments where the format string is obtained from user data, or
otherwise difficult to verify statically.
Example usage:
printf(fmtcheck(user_format, standard_format), arg1, arg2);
checks the format string user_format for consistency (same number/order/
type of format operators) with standard_format. If they differ,
standard_format is used instead to avoid potential crashes or security
violations.
Obtained from: NetBSD
Reviewed by: -arch
to make asynchronous RPCs. This is needed to help fix ypbind, which can no
longer override the clnt_dg_call() method (formerly the clntudp_call()
method) due to all the internal descriptor locking code in TI-RPC. Turning
on this flag allows us to send an RPC request, then return immediately,
and handle a reply later, rather than being forced to do the request
and reply in a single function call.
Also fix a byte ordering bug: when clnt_dg_call() increments the XID
prior to transmitting a request, it uses the raw value, which is wrong.
The XID is stored in network byte order, i.e. big-endian. The CLSET_XID
and CLGET_XID commands in clnt_dg_control() use ntohl()/htonl() to get
the byte ordering right, but because clnt_dg_call() does not do this,
using CLSET_XID/CLGET_XID doesn't actually work, unless you're on a
big endian host, which we aren't (yet). Fix clnt_dg_call() to byte swap
properly when doing the increment.
because rpcb_clnt.h is generated during buildworld and only installed into
/usr/include/rpc (and not present in src/include/rpc) we can fix it
by simply not including it when _KERNEL is defined.
this isn't the most elegant, way and might deserve some revisiting later.
Pointed out by: bde
number of paths which glob(3) will return. Remove the hardcoded limit
from the last commit, which restores the previous unbounded behavior.
Document the new flag in the manual page.
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
lock definitions to it. flockfile state is now allocated
along with the rest of FILE. This eliminates the need for a
separate allocation of flockfile state as well as eliminating
the mutex/lock used to serialize its allocation.
o Back out the __std* stuff. Can't figure out how to do this right now,
so we'll save it for late.
o use _up as a pointer for extra fields that we need to access.
o back out the libc major version bump.
Submitted by: green
reviewed by: peter, imp, green, obrien (to varying degrees).
We'll fix the "how do we stop encoding sizeof(FILE) in binaries" part
later.
bikeshed in -arch. It isn't quite over, but it has been well established
that this can be adjusted or refined. But we do seem to have consensis
on a major bump of some sort. After this, it should reasonably safe
to build world again.
This change is to get rid of __sF[] and use seperate __stdin/out/err
handles. This means we can pad on extra bits onto the end of FILE
at will without going through this all over again. __sF[] was evil
because it compiled the sizeof(FILE) into every stdio using program.
Asbestos suit on: check!
Peril sensitive sunglasses on: check!
*gulp!*
try a hopefully more robust stdin/stdout/stderr. This costs an indirect
pointer fetch, but saves us from changes in 'FILE'. The __stdin stuff
is there to not pollute application name space if the application does
not use <stdio.h> and also in case something depended on the current
behavior where stdin etc was a #define.
Reviewed by: eischen, dillon
stderr in case of warnings and errors.
Rename malloc_options to have a leading underscore, I belive I have been
told that is more correct namespace wise.
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.
Define __offsetof() in <machine/ansi.h>
Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>
Remove myriad of local offsetof() definitions.
Remove includes of <stddef.h> in kernel code.
NB: Kernelcode should *never* include from /usr/include !
Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.
Deprecate <struct.h> with a warning. The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.
Paritials reviews by: various.
Significant brucifications by: bde
1) Add FreeBSD: tag.
2) Add parenthesis around macro args.
3) Add parenthesis around macros which are expressions.
4) Add do { ... } while (0) around macros which are compound statements.
5) Sync bitstr_size and bit_alloc with neater versions from NetBSD.
6) Fix bit_ffs and bit_ffc so that they don't search off the end of the
bitstirng.
7) Try to avoid rightshifting signed ints.
I didn't take NetBSD's version directly as the macros are significantly
slower for long bitstrings. Bruce reviewed a previous version of
this patch.
PR: 21204
Submitted by: bob@immure.com
Reviewed by: bde
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
and bump __FreeBSD_version to 500012 to mark the occasion.
setproctitle() is prototyped in unistd.h as opposed to stdlib.h
where OpenBSD and NetBSD have it.
Reviewed by: peter
for crypt(3) by now. In any case:
Add crypt_set_format(3) + documentation to -lcrypt.
Add login_setcryptfmt(3) + documentation to -lutil.
Support for switching crypt formats in passwd(8).
Support for switching crypt formats in pw(8).
The simple synopsis is:
edit login.conf; add a passwd_format field set to "des" or "md5"; go nuts :)
Reviewed by: peter
pid_t rfork_thread(int forkflags, void *stack, int (*func)(void *arg),
void *arg);
A new process is created, presumably using RFMEM shared address space.
The child process switches to the supplied stack, which is set up with a
function call frame. The function is called with the supplied arguement.
If the function returns, the return value will be used with _exit(2).
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
remove (comment out) functions defined or depricated elsewhere:
bsearch, lfind, lsearch, insque, remque
change hcreate to take a size_t rather than uint (essentially the same)
since hcreate/hdestroy are now in <search.h>, remove private search.h
in lib/libc/db/hash/
add $FreeBSD tags to hsearch.c
interface addresses in a portable manner, without headache of SIOCGIFCONF
or sysctl. it is in bsdi/openbsd/netbsd already.
from kame tree (actually, mandatory for latest kame tree).
of the C++ stdlib. Our ctype.h uses symbols of the form _<X> to denote the
various character classes. Our ctype.h also extends the usual ctype.h
offering by adding the "_T" (special) class. Problem is parts of the STL
also use the symbol "_T" as its parameterized type. These two uses are
incompatible.
Thus change the form of the symbols used in ctype to something that fixes
the current problem and is less likely to cause conflicts in the future.
Requested by: Tomoaki NISHIYAMA <tomoaki@biol.s.u-tokyo.ac.jp>
Ok'ed by: JKH
interface, and statically link them to the programs using them.
These functions, upon reflection and discussion, are too generically
named for a library interface with such specific functionality.
Also the api that they use, whilst ok for private use, isn't good
enough for a libc function.
Additionally there were complications with the build/install-world
process. It depends heavily upon xinstall, which got broken by
the change in api, and caused bootstrap problems and general mayhem.
There is work in progress to address future problems that may be
caused by changes in install-chain tools, and better names for
{g|s}etflags can be derived when some future program requires them.
For now the code has been left in src/lib/libc/gen (it started off
in src/bin/ls).
It's important to provide library functions for manipulating file
flag strings if we ever want this interface to be adopted outside
of the source tree, but now isn't necessarily the right moment
with 4.0-release just around the corner.
Approved: jkh
Some of rcmd related function is need to be updated to
support IPv6. Some of them are already updated as standard
document. But there is also several de-facto functions and
they are not listed in standard documents.
They are,
iruserok() (used by rlogind, rshd)
ruserok() (used by kerberos, etc)
KAME package updated those functions in original way.
iruserok_af()
ruserok_af()
But recently there was discussion on IETF IPng mailing
list about how to sync those API, and it is decided,
-Those function is not standard and not documented.
-But let BSDs sync their API as de-facto.
And after some discussion, it is announced that
-add update to iruserok() as iruserok_sa()
-no ruserok() API change(it is only updated internaly)
So I sync those API before 4.0 is released.
The changes are,
-prototype changes
-ruserok() internal update (use iruserok_sa() inside)
-removal of ruserok_af()
-change iruserok_af() as static functioin, and also prefix the name with __.
-add iruserok_sa() (Just call __iruserok_af() inside)
-adding flag AI_ALL to getipnodebyaddr() called from __icheckhost().
This is necessary to support IPv4 communication via AF_INET6 socket
could be correctly authenticated via iruserok_sa()
-irusreok_af() call is replaced to iruserok_sa() call
in rlogind, and rshd.
Approved by: jkh
string to u_long and back using two functions, flags_to_string and
string_to_flags, which co-existed with 'ls'. As time has progressed
more and more other tools have used these private functions to
manipulate the file flags.
Recently I moved these functions from /usr/src/bin/ls to libutil,
but after some discussion with bde it's been decided that they
really ought to go in libc.
There are two already existing libc functions for manipulating file
modes: setmode and getmode. In keeping with these flags_to_string
has been renamed getflags and string_to_flags to setflags.
The manual page could probably be improved upon ;)
It was creating ${.OBJDIR}/${MACHINE}/usr/include/dev -> .../sys/dev
and mkioctls would descend that and saw *all* of src/sys/dev/*/*.h,
not just dev/usb/*.h. It then choked on the dpt includes.
-changed bindresvport2 to bindresvport_sa
-merged the man into bindresvport.3
All discussion between Jean-Luc Richier <Jean-Luc.Richier@imag.fr>,
Theo de Raadt <deraadt@cvs.openbsd.org>, itojun, is reflected to
this code. (Actually Theo de Raadt write the code simultaneously as the
discussion change.)
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
locking functions. If an application loads a shared object with
dlopen() and the shared object has an init function which requires
lazy binding, then _rtld_bind is called when the thread is already
inside the dynamic linker. This leads to a recursive acquisition
of the lock, which I was not expecting -- hence the assert failure.
This work-around makes the default locking functions handle recursive
locking. It is NOT the correct fix -- that should be implemented
at the generic locking level rather than in the default locking
functions. I will implement the correct fix in a future commit.
Since the dllockinit() interface will likely need to change, warn
about that in both the man page and the header file.
functions to be used by the dynamic linker. This can be called by
threads packages at start-up time. I will add the call to libc_r
soon.
Also add a default locking method that is used up until dllockinit()
is called. The default method works by blocking SIGVTALRM, SIGPROF,
and SIGALRM in critical sections. It is based on the observation
that most user-space threads packages implement thread preemption
with one of these signals (usually SIGVTALRM).
The dynamic linker has never been reentrant, but it became less
reentrant in revision 1.34 of "src/libexec/rtld-elf/rtld.c".
Starting with that revision, multiple threads each doing lazy
binding could interfere with each other. The usual symptom was
that a symbol was falsely reported as undefined at start-up time.
It was rare but not unseen. This commit fixes it.
1003.1c-1995.
Undefine _POSIX_THREAD_SAFE_FUNCTIONS, since we do not implement all of the
necessary interfaces. At least getgrgid_r(), getrnam_r(), getpwuid_r(),
getpwnam_r(), getc_unlocked(), getchar_unlocked(), putc_unlocked(),
and putchar_unlocked() are missing. Due to a likely typo in 1003.1c-1995,
we are not technically allowed to define _POSIX_THREADS without defining
_POSIX_THREAD_SAFE_FUNCTIONS, but either way we're non-compliant, so I'm
leaving _POSIX_THREADS defined.
PR: bin/8281
readdir_r is not POSIX according to POSIX_SOURCE, bruce says:
> readdir_r() is in the _POSIX_SOURCE section, but is not a POSIX.1-1990
> function. It's POSIX.1-1996 so it should be under a different feature
> test which we don't support yet.
make sure errno is saved so that its contents are cleared unless
necessary.
Submitted by: bde
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
the default SHARED=copies, otherwise the kernel source tree gets modified
if /usr/include/machine is a symlink to the source tree (which is not the
case by default). Nothing in our src tree uses <machine/soundcard.h>.
Pointed out by: bde
would expect. (Allow user data to be associated with an EditLine context).
As this changes no existing interfaces and doesn't alter any structs
visable to the user I've been told that its not necessary to bump
the version of the library.
not currently supported. Also corrected the declaration for
pthread_testcancel which incorrectly returned int when POSIX and
SUSv2 both say it should be void.
Submitted by: Ralf S. Engelschall <rse@engelschall.com>
Reviewed by: John Birrell <jb@freebsd.org>
function. It was an ill-considered feature. It didn't solve the
problem I wanted it to solve. And it added Yet Another Version
Number that would have to be maintained at every release point.
I'm nuking it now before anybody grows too fond of it.
Include <machine/ansi.h> so that this file is self-sufficient again.
Rev.1.6 doesn't do this as claimed unless <nlist.h> has nonstandard
pollution.
Cleaned up includes.
implementation requires two things:
1.) The priority queues must be protected during insertion
and removal of threads. Since the kernel scheduler
must modify the priority queues, a spinlock for
protection cannot be used. The functions
_thread_kern_sched_defer() and _thread_kern_sched_undefer()
were added to {un}defer kernel scheduler activation.
2.) A thread (active) priority change can be performed only
when the thread is removed from the priority queue. The
implementation uses a threads active priority when
inserting it into the queue.
A by-product is that thread switches are much faster. A
separate queue is used for waiting and/or blocked threads,
and it is searched at most 2 times in the kernel scheduler
when there are active threads. It should be possible to
reduce this to once by combining polling of threads waiting
on I/O with the loop that looks for timed out threads and
the minimum timeout value.
o Functions to defer kernel scheduler activation were added. These
are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
and may be called recursively. These routines do not block the
scheduling signal, but latch its occurrence. The signal handler
will not call the kernel scheduler when the running thread has
deferred scheduling, but it will be called when running thread
undefers scheduling.
o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING. All the
POSIX routines required by this should now be implemented.
One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
to be defined by including pthread.h. These defines are currently
in sched.h. I modified pthread.h to include sched.h but don't
know if this is the proper thing to do.
o Added support for priority protection and inheritence mutexes.
This allows definition of _POSIX_THREAD_PRIO_PROTECT and
_POSIX_THREAD_PRIO_INHERIT.
o Added additional error checks required by POSIX for mutexes and
condition variables.
o Provided a wrapper for sigpending which is marked as a hidden
syscall.
o Added a non-portable function as a debugging aid to allow an
application to monitor thread context switches. An application
can install a routine that gets called everytime a thread
(explicitly created by the application) gets context switched.
The routine gets passed the pthread IDs of the threads that are
being switched in and out. I found this useful, but we can
get rid of it if you want.
Submitted by: Dan Eischen <eischen@vigrid.com>
to be written to /etc.
The only essential change is in paths.h, so any third-party software
written correctly will pick it up in the next rebuild.
Reviewed by: the committers list (actually an old version)
of getopt (as in, multiple input lines :). This is documented in the
man page and is used in the code, but unistd.h and stand.h do not
declare it. Incidentally, it prevents me fixing a bug in loader's
code... :-)
PR: misc/9373
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>
#include <ieeefp.h>
to access these functions instead of the i386 specific
#include <machine/floatingpoint.h>
Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
- created internal names for fixed-size integral types, like __int32_t. They
will be used to make several headers self-sufficient.
- <stdlib.h> don't include <machine/types.h> anymore.
- created <sys/inttypes.h>, which can be used as <inttypes.h>.
- declaration of uoff_t and ufs_daddr_t moved to <sys/types.h>.
Reviewed by: bde
<kvm.h> is self-sufficient again.
Moved typedefs and forward struct declarations out of __BEGIN_DECLS/
__END_DECLS.
Don't comment out the prototype for kvm_uread(). This was a 4 year
old kludge for previous breakage of self-sufficiency. The prototypwe
was broken instead.
Fixed bitrot (const poisoning) in the type of kvm_uread().
Fixed order of the declaration of kvm_uread().
and their argument lists for the err(3) family of functions. Note,
I intentionally used __printflike instead of __printf0like for
warnx. Although a NULL format string is legal for that function, it
doesn't make any sense.
breaks cross-builds. Just depend on ${.CURDIR}/../sys/conf/newvers.sh
existing.
Don't override the (correct) defaults for the depend, lint or tags target.
In LDIRS: fixed order-rot. Don't comment out dead networking directories;
remove them.
with the SunRPC code to allow the use of hardware DES on certain Sun
hardware that supported it (if you installed the appropriate kit). We
don't have them and they apparently break the ioctl table
generation for kdump.
Pointed out by: bde
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
when it returns NULL to indicate failure, it will also free the memory
that was passed to it, if that was non-null.
This does not change the semantics of realloc.
A second commit will be done to commit the conversion of those places in
the code that can safely use this to avoid memory leaks when confronted
with low memory situations.
Beaten-to-death-but-finally-approved-in: -current
- Fix some style errors I made back in 1995.
- Add a new flavor of the err(3) family, which takes an explicit
errno argument rather than implicitly examining errno. This
will make it easier to use these functions in conjunction with
modern library interfaces that return an errno value explicitly.
standard places ("/etc/objformat", ${OBJFORMAT}, argv) for an
indication of the user's preferred object file format. This
consolidates some code that was starting to be duplicated in more
and more places.
Use the new function in ldconfig.
Note: I don't think that gcc should use getobjformat(), even though
it could. The compiler should limit itself to functions that are
widespread, to ease porting and cross-compilation.
externed in netdb.h - where all of its #define values
live. If anything requires h_errno here (nothing in
/usr/src seems to) it's almost definitely broken.
Use them to `make gcc -Wformat' check formats for all printf-like
and scanf-like functions in /usr/src except for the err()/warn()
family. err() isn't quite printf-like since its format arg can
legitimately be NULL. syslog() isn't quite printf-like, but gcc
already accepts %m, even for plain printf() when it shouldn't.
as threatened in the 4-5 year old comment. Most of the change is
in <machine/ansi.h>; this commit just removes cruft for the strict
ANSI case. 64-bit types couldn't actually be defined using
__attribute__(()) in gcc-2.4, since attribute names in the
implementation namespace only became available in gcc-2.7. I've
probably just broken gcc-2.6 support by using the gcc-2.7 names
unconditionally.
<resolv.h>. This breaks user ppp at least, and goodness knows how
many ports. :-(
This a bit of a hack, but is probably simpler than duplicating the
typedefs and protecting them from each other.
Also, remove some temporary XXX notes that I forgot to remove before.
since it has far wider impact than hostname lookups (including passwords).
Note that this has more ugly symbol hiding and binary compatability hacks
that can go away the second we bump majors.
Obtained from: Mostly from diff against ISC bind-8.1.2 sources
instead of long long and unsigned long long. Really they should be
quad_t and u_quad_t, but that would require sys/types.h and this
header only includes machine/types.h. The difference here is that
int64_t and u_int64_t on alpha are long and unsigned long, not
long long etc. This is required to pass gcc's type checking where
long != long long even though they are the same size of alpha.
about spaces and tabs.
The externs in the static inline functions remain 'cause (a) they're
required; and (b) I can't find any gcc -W* cases where they generate
warnings.
test for __isthreaded before calling the lock/unlock functions to
try to save some performance. The _THREAD_SAFE case should become the
default, but since it tests for a global variable in libc, people won't
be able to build -current on pre-3.0 systems unless the default leaves
it out. Such is life.
_KPOSIX_PRIORITY_SCHEDULING options to work. Changes:
Change all "posix4" to "p1003_1b". Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;
Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;
Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;
Add options to LINT;
Minor fixes to P1003_1B code during testing.
Changes to support building with _POSIX_SOURCE set to 199309L:
1. Add sys/_posix.h to handle those preprocessor defs that POSIX
says have effects when defined before including any header files;
2. Change POSIX4_VISIBLE back to _POSIX4_VISIBLE
3. Add _POSIX4_VISIBLE_HISTORICALLY for pre-existing BSD features now
defined in POSIX. These show up when:
_POSIX_SOURCE and _POSIX_C_SOURCE are not set or
_POSIX_C_SOURCE is set >= 199309L
and vanish when:
_POSIX_SOURCE is set or _POSIX_C_SOURCE is < 199309L.
4. Explain these in man 9 posix4;
5. Include _posix.h and conditionalize on new feature test.
is generated. It must be installed in both /usr/include/rpc/ and
/usr/include/rpcsvc/ for historical reasons. The generated version
was once missing ANSI prototypes because the wrong flags were passed
to rpcgen, but that is fixed now. The committed version had `#pragma
indent' which gratuitously broke K&R support. Apart from this, all
versions before and after this commit are identical.
Move sigjmp_buf and jmp_buf structure definitions to machine/setjmp.h
so that i386 can continue to use int as the basic register type and
alpha can use long. Bruce was concerned about possible differing
alignment. I've left the definition of _JBLEN in machine/setjmp.h
even though Bruce's example used the number directly. I don't know if
any other code relies on _JBLEN, so I left it to avoid potential
breakage.
Note: this may cause some problems in a few cases. With very old versions
of rpcgen, if you defined a procedure called foo, then rpcen would create
client stubs for function foo_1() and server stubs _also_ with function
foo_1(). This only worked because of the lack of ANSI prototypes: the
client side stub takes different arguments than the server side stub.
(The client side takes a CLIENT * handle, while the server side wants
an svc_req *.)
To fix this conflict, rpcgen in ANSI mode generates foo_1() for the client
and foo_1_svc() for the server. RPC server code that depends on the old
behavior might break because of this. (Fixing it is just a matter of
adding the _svc suffix onto the server procedure names.)
isn't gratuitously broken. This also prevents ANSI compilers from
recognizing the pragma as a request to run /usr/games/hack...
FreeBSD Ids should be in comments or rcsids, not in `#pragma ident's
(which are equivalent to comments when compiled by gcc), and the
only FreeBSD change in this file seems to be adding the Id.
definitions for architectures that we don't have libc MD source for.
Change 'int' to 'long' in sigjmp_buf and jmp_buf structures so
that they are suitable for the register size on both i386 and alpha.
Although FreeBSD defines these structures differently to NetBSD,
the element size is now the same.
If Bruce doesn't like this [8-)], we'll need to add a typedef to
each <machine/setjmp.h> and use that in <setjmp.h>.
RFC 1350 isn't very explicit about this, but the use of signed
integers doesn't seem to make sense.
Should be in 2.2.5, but is probably too late to be verified completely.
PR: bin/4502
Submitted by: Dirk Nehrling <nerle@pdv.de> via Lars Koeller
sys/poll.h). Just provide a link, it's close enough. :-) In an ideal
world the prototype for poll() would be in <poll.h> but some code seems
to expect it in <sys/poll.h>, so we can't win there.
modify the original `no modifications' copyright message, and i've
included his mail into the source file.
The common localization functions between strptime(3) and strftime(3)
have been broken out into timelocal.[ch].
implement (better) falback code inside srandomdev() itself.
Change return type from int to void (binary compatibility surprisely
achieved). Userland code will be changed soon.
Secure RPC import I've been threatening.
This step adds some necessary protocol definition files and headers to
rpcsvc, including the ones needed for NIS+.
Reviewed by: Mark Murray
conflict with the kernel visible one. Make the new stuff not visible if
_ANSI_SOURCE or _POSIX_SOURCE is defined (!) because the new things are
not part of the base 1003.1-1990 standard (or ansi).
Use _BSD_OFF_T_ instead of off_t so that we're still self-sufficent.
Copied the ftruncate/lseek()/mmap()/truncate() redeclaration hacks
from <sys/types.h> so that things depending on them don't break.
cause noise.
Duplicated the lseek() redeclaration hack for all functions involving
off_t's (ftruncate(), mmap() and truncate()) to help broken programs
work.
Use mtree instead of mkdir+chown+chmod to build the subdirectory hierachy.
The corresponding mtree command in src/etc/Makefile can't be relied on
because the hierachy gets blown away in the default SHARED=symlinks case.
them now that <sys/mount.h> no longer declares filesytem-specific mount
args structs.
Renamed some macros to be less ufs-centric.
Fixed order of mkdirs. The order has been broken since the backwards
`.for' loop bug was fixed in `make' on 1996/09/21.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
more manageable and convenient referencing by login.conf (login
class database) and (e.g.) login.access.
This is the first of a group of commits which implements the login
class capabilities database.
suffering a bad case neglect for the last few years.
- Add full prototypes, including to function pointers.
- Make the wire protocols 64-bit type safe, eg: 32 bit quantities are
int32_t, not long. The orginal rpc code was implemented when an int
could be 16 bits.
Obtained from: a diff of FreeBSD vs. OpenBSD/NetBSD rpc code.
line with BSD/OS and Linux's username limits, making transitioning from
either operating system a lot easier than it is now. I'm currently
running with this change on my system, as are several others, and have
experienced no ill effects.
This is not for 2.2! This needs to get shaken out longer term in 3.0.
Previously-approved-by: davidg
we use it in the uthreads implementation.
Moved enum pthread_mutextype here from libc_r/uthread/pthread_private.h.
Change prototype for pthread_getspecific().
support LD_HINTS_VERSION_2 that has the ldconfig pathname stored in the
ld.so.hints file (ie: a new library can be installed and used without
needing to run ldconfig -m first)
Reviewed by: nate, jdp
Obtained from: NetBSD (mostly)
for gcc >= 2.5 and no-ops for gcc >= 2.6. Converted to use __dead2
or __pure2 where it wasn't already done, except in math.h where use
of __pure was mostly wrong.
- use .for loops instead of shell for loops. This means we can be
shown what is happening while it's going, rather than some pacifier
"echo" statement.
- use "${INSTALL} -C", nuke the "cmp -s" hack
- for "copies" mode, the include files are no longer touched each time
the world is built. (ie: no rm -rf. symlinks are removed, mtree builds
the new dirs or confirms the existing ones)
- osreldate.h is build in the local dir and conditionally installed,
rather than built in /usr/include and either renamed or deleted.
Here are the diffs for libc_r to get it one step closer to P1003.1c
These make most of the thread/mutex/condvar structures opaque to the
user. There are three functions which have been renamed with _np
suffixes because they are extensions to P1003.1c (I did them for JAVA,
which needs to suspend/resume threads and also start threads suspended).
I've created a new header (pthread_np.h) for the non-POSIX stuff.
The egrep tags stuff in /usr/src/lib/libc_r/Makefile that I uncommented
doesn't work. I think its best to delete it. I don't think libc_r needs
tags anyway, 'cause most of the source is in libc which does have tags.
also:
Here's the first batch of man pages for the thread functions.
The diff to /usr/src/lib/libc_r/Makefile removes some stuff that was
inherited from /usr/src/lib/libc/Makefile that should only be done with
libc.
also:
I should have sent this diff with the pthread(3) man page.
It allows people to type
make -DWANT_LIBC_R world
to get libc_r built with the rest of the world. I put this in the
pthread(3) man page. The default is still not to build libc_r.
also:
The diff attached adds a pthread(3) man page to /usr/src/share/man/man3.
The idea is that without libc_r installed, this man page will give people
enough info to know that they have to build libc_r.
in the POSIX section for a log time. The non-POSIX getgrouplist() and
setgroups() were recently added to the POSIX section although setgroups()
was already in the non-POSIX section.
easier to use in mixed environments:
- Add three new members to the request structure:
- a filename specification
- a database type specification
- a system byte prder specification
These allow the client to ask the server for a particular type of
database (Berkeley DB hash/btree/recno, GNU GDBM, dbm, ndbm, etc...)
and get back a meaningful error if the server doesn't support it.
The byte order spec is needed if the database type is byte order
sensntive. You don't, for example, want to read an ndbm database
from a big endian machine on a little endian machine (the ndbm code
will explode). The filename spec lets the client handle things like
ndbm which uses two seperate files per database (foo.dir and foo.pag).
The client can ask for each half, one at a time.
- Add a list of database types and byte order values. Each list has
a wildcard 'ANY' entry which lets the client ask for whatever the
server supports. (XFR_ENDIAN_ANY is useful with the Berkeley DB hash
method for instance, since it isn't byte order sensitive.)
- Add two newserver failure codes: XFR_DB_TYPE_MISMATCH and
XFR_DB_ENDIAN_MISMATCH. The server uses these to tell the client
that it doesn't support the requested type/byte order.
These changes were made at the suggestion of Thorsten Kukuk, the
current maintainer of the Linux ypserv distribution. This allows
Linux and FreeBSD NIS servers to use the same ypxfrd protocol and
avoid accidentally exchanging incompatible map files.
Import a my own little ypxfrd protocol. Note that this protocol is
_NOT_ the same as Sun's, which is proprietary.
This basically impliments an RPC-based file transfer protocol which
lets a slave server suck over a raw map database file from the master.
This is many times faster than the normal method, which requires reading
the records from ypserv via yp_all() and then creating a new database
on the fly, particularly when you have many tens of thousands of
records in a map (e.g. a huge passwd database).
The protocol number I chose falls within the 'user-specified' range.
Maybe we should register it with Sun so we can get an official vendor
number for it. :)
