machines. Specifically, there was a mismatch between how the routine
allocation and deallocation operations accessed the population map
and how the aggressively optimized reservation-breaking operation
accessed it. So, problems only occurred when reservations were broken.
This change makes the routine operations access the population map in
the same way as the reservation breaking operation.
This bug was introduced in r259999.
PR: 187080
Tested by: jmg (on an "armeb" machine)
Sponsored by: EMC / Isilon Storage Division
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.
In many cases these bugs could result in leaks when a driver was detached.
Reviewed by: yongari
MFC after: 2 weeks
Direct bpf(4) consumers should now work fine with this tunable turned on.
In fact, the only case when optimized_writers can change program
behavior is direct bpf(4) consumer setting its read filter to
catch-all one.
MFC after: 2 weeks
Sponsored by: Yandex LLC
This partitioning scheme is used in DragonFlyBSD. It is similar to
BSD disklabel, but has the following improvements:
* metadata has own dedicated place and isn't accessible through partitions;
* all offsets are 64-bit;
* supports 16 partitions by default (has reserved place for more);
* has reserved place for backup label (but not yet implemented);
* has UUIDs for partitions and partition types;
No objections from: geom
MFC after: 2 weeks
Relnotes: yes
don't create a map before calling bus_dmamem_alloc() (such maps were
leaked). It is believed that the extra destroy of the map was generally
harmless since bus_dmamem_alloc() often uses special maps for which
bus_dmamap_destroy() is a no-op (e.g. on x86).
Reviewed by: scottl
shutdown by putting the former under !rebooting and turning the latter into
debug messages.
Reviewed by: hps
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
injected into the guest. This allows the hypervisor to inject another
ExtINT or APIC vector as soon as the guest is able to process interrupts.
This change is not to address any correctness issue but to guarantee that
any pending APIC vector that was preempted by the ExtINT will be injected
as soon as possible. Prior to this change such pending interrupts could be
delayed until the next VM exit.
names so that encoding names are treated as case-insensitive. This allows
the use of 'utf-8' instead of 'UTF-8' for example and matches the behavior
of iconv(1).
PR: 167977
Submitted by: buganini@gmail.com
MFC after: 1 week
- Use the existing vbus locks instead of Giant for the CAM sim lock.
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler as MPSAFE.
- Don't attempt to pass data in the softc from probe() to attach().
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
Assisted by: delphij
* The way rings are updated changed with the last API bump.
Also sync ->head when moving slots in netmap_sw_to_nic().
* Remove a crashing selrecord() call.
* Unclog the logic surrounding netmap_rxsync_from_host().
* Add timestamping to RX host ring.
* Remove a couple of obsolete comments.
Submitted by: Franco Fichtner
MFC after: 3 days
Sponsored by: Packetwerk
flags, to rwlock. Lock it in read mode when used from subroutines
called from buffer release code paths.
The needsbuffer is now updated using atomics, while read lock of
nblock prevents loosing the wakeups from bufspacewakeup() and
bufcountadd() in getnewbuf_bufd_help().
In several interesting loads, needsbuffer flags are never set, while
buffers are reused quickly. This causes brelse() and bqrelse() from
different threads to content on the nblock. Now they take nblock in
read mode, together with needsbuffer not needing an update, allowing
higher parallelism.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
to !MAP_STACK mapping requests. For MAP_STACK | MAP_FIXED, clear any
mappings which could previously exist in the used range.
For this, teach vm_map_find() and vm_map_fixed() to handle
MAP_STACK_GROWS_DOWN or _UP cow flags, by calling a new
vm_map_stack_locked() helper, which is factored out from
vm_map_stack().
The side effect of the change is that MAP_STACK started obeying
MAP_ALIGNMENT and MAP_32BIT flags.
Reported by: rwatson
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Apparently for VMware Fusion (and presumably VMware Workstation/Player
since the PR states TSO is broken there too, but I cannot test), the
TCP header pseudo checksum calculated should only include the protocol
(IPPROTO_TCP) value, not also the lengths as the stack does instead.
VMware ESXi seems to ignore whatever value is in the TCP header checksum,
and it is a bit surprising there is a different behavior between the
VMware products. And it is unfortunate that on ESXi we are forced to do
this extra bit of work.
PR: kern/185849
MFC after: 3 days
on USB HUBs by moving the code into the USB explore threads. The
deadlock happens because child devices of the USB HUB don't have the
expected reference count when called from outside the explore
thread. Only the HUB device itself, which the IOCTL interface locks,
gets the correct reference count.
MFC after: 3 days
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(),
that reduces number of global vnode_free_list_mtx mutex acquisitions
from 4 to 2 per NFS request on ZFS, improving SMP scalability.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Old design with unified thread pool was good from the point of thread
utilization. But single pool-wide mutex became huge congestion point
for systems with many CPUs. To reduce the congestion create several
thread groups within a pool (one group for every 6 CPUs and 12 threads),
each group with own mutex. Each connection during its registration is
assigned to one of the groups in round-robin fashion. File affinify
code may still move requests between the groups, but otherwise groups
are self-contained.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
using a direct hook called from kern_vfs_bio_buffer_alloc().
Mark ffs_rawread.c as requiring both ffs and directio options to be
compiled into the kernel. Add ffs_rawread.c to the list of ufs.ko
module' sources.
In addition to stopping breaking the layering violation, it also
allows to link kernel when FFS is configured as module and DIRECTIO is
enabled.
One consequence of the change is that ffs_rawread.o is always linked
into the module regardless of the DIRECTIO option. This is similar to
the option QUOTA and ufs_quota.c.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This allows to slightly simplify svc_run_internal() code: if we processed
all the requests in a queue, then we know that new one will not appear.
MFC after: 2 weeks
